Use of Natural Products for Post-Harvest Preservation of 'Vega' Cut Roses

Use of natural products as floral preservatives has helped to reduce the indiscriminate use of chemical products in flower preservation. In this study, we tested the ability of certain natural products to maintain the quality and to increase the commercial durability of 'Vega' cut roses. We employed a randomized factorial design with six post-harvest treatments and four evaluation dates. The following treatments were tested: 1) distilled water; 2) methyl jasmonate (350 mu M) applied in a four-hour pulse; 3) methyl jasmonate (500 mu M) spraying; 4) mint oil (100 ppm); 5) ginger oil (100 ppm); and 6) propolis (0.05%) as a maintenance solution. Flowers were kept at 20+/-2 degrees C and 67+/-3% RH. Physiological and qualitative evaluations were conducted. Natural products had a beneficial effect on the shelf life of the flowers. However, for all evaluated parameters, the methyl jasmonate spray was the most efficient treatment to maintain floral quality, resulting in less fresh-mass loss and a lower flower respiratory rate. Methyl jasmonate spray also improved the maintenance of coloration, relative water content and concentration of reducing sugars, thus extending the shelf life of roses.

Total and harvest-date yield of processing tomato cultivars

The productivity of 28 tomato cultivars was evaluated over three stages of harvest. The study was carried out during from June to December of 1999 in an open field at the experimental area of the Section of Olericulture and Aromatic Medicinal Plants, Department of Crop Production at FCAV-UNESP, Jaboticabal, SP, Brazil. The cultivars studied were H 7155, Hypeel, Andino, U 573, H 9036, IPA 6, H 9494, AG 33, Yuba, RPT 1294, AG 72, Pelmeech, Curico, Hypeel 45, RPT 1478, H 9492, H 9498, H 2710, Hitech 45, Halley, Botu 13, H 9553, U 646, NK 1570, AG 45, RPT 1095, RPT 1570, and PSX 37511. The experimental design was a randomized block design with four repetitions, with five plants per plot. Productivity was evaluated at three stages of harvest at 119, 149 and 179 days after seeding. There were no significant differences among the cultivars at the first harvest (119 days). The majority of the cultivars produced their highest yield at the second harvest; the most productive cultivars were Curicó and AG 72, which yielded 4.69 and 4.67 kg/plant, respectively, although they did not differ statistically from the cultivars Hypeel 45 (4.35 kg/plant) and H 9498 (4.16 kg/plant). Yields of the cultivars Andino and H 9494 were evenly distributed between the second and third harvests. At the third harvest, cultivar IPA 6 had the highest yield (2.9 kg/plant) and was statistically different from all other cultivars except H 9036 (2.34 kg). These two cultivars had the most delayed and concentrated maturity, making them suitable for mechanical harvesting, although at a later time. Cultivar AG 72 had the greatest total yield (5.76 kg/plant), but it was not statistically different from cultivars Hypeel 45 (5.43 kg), Curico (4.17 kg), H 9498 (4.83 kg), H 7155 (4.58 kg) and Halley (4.55 kg). All of the cultivars, with the exception of cultivars H 9036, IPA 6, Andino and H 9494 showed in the second harvest concentrated maturity, making it suitable for mechanical harvesting.

Study of thresholds to burning in surface grinding process

This work aims at finding out the threshold to burning in surface grinding process. Acoustic emission and electric power signals are acquired from an analog-digital converter and processed through algorithms in order to generate a control signal to inform the operator or interrupt the process in the case of burning occurrence. The thresholds that dictate the situation of burn and non-burn were studied as well as a comparison between the two parameters was carried out. In the experimental work one type of steel (ABNT-1045 annealed) and one type of grinding wheel referred to as TARGA model 3TG80.3-NV were employed. Copyright © 2005 by ABCM.

Burning mouth syndrome: A discussion about possible etiological factors and treatment modalities

Although several studies discuss the contributing factors associated with the burning mouth syndrome (BMS), there is still controversy with regard to its etiology. Therefore, in the majority of cases, the establishment of an adequate diagnosis and consequently the best treatment modality is complicated. In order to assist the clinician in the establishment of the correct diagnosis and management of BMS, this article reviews the literature, providing a discussion on the various etiologic factors involved in BMS, as well as the best treatment modalities for this condition that have showed to be the most effective ones in randomized clinical trials. In addition, the authors discuss some clinical characteristics in the differential diagnosis of BMS and other oral diseases. It is important for the clinician to understand that BMS should be diagnosed only after all other possible causes for the symptoms have been ruled out.

Greenhouse gas emission associated with sugar production in southern Brazil

Background: Since sugarcane areas have increased rapidly in Brazil, the contribution of the sugarcane production, and, especially, of the sugarcane harvest system to the greenhouse gas emissions of the country is an issue of national concern. Here we analyze some data characterizing various activities of two sugarcane mills during the harvest period of 2006-2007 and quantify the carbon footprint of sugar production.Results: According to our calculations, 241 kg of carbon dioxide equivalent were released to the atmosphere per a ton of sugar produced (2406 kg of carbon dioxide equivalent per a hectare of the cropped area, and 26.5 kg of carbon dioxide equivalent per a ton of sugarcane processed). The major part of the total emission (44%) resulted from residues burning; about 20% resulted from the use of synthetic fertilizers, and about 18% from fossil fuel combustion.Conclusions: The results of this study suggest that the most important reduction in greenhouse gas emissions from sugarcane areas could be achieved by switching to a green harvest system, that is, to harvesting without burning. © 2010 de Figueiredo et al; licensee BioMed Central Ltd.

Optimal energy generation with biomass of sugarcane harvest

The aim of this work is the application of the Interior Point and Branch and Bound methods in multiobjective optimization models related to sugarcane harvest residual biomass. These methods showed their viability to help on choosing the sugarcane planting varieties, searching to optimize cost and energy balance of harvest residual biomass, which have conflitant objectives. These methods provide satisfactory results, with fair computing performance and reliable and consistent solutions to the analyzed models. © 2011 IEEE.

Initial analysis from a Lidar observation campaign of sugar cane fires in the central and western portion of the S̃ao Paulo State - Brazil

The central and western portion of the S̃ao Paulo State has large areas of sugar cane plantations, and due to the growing demand for biofuels, the production is increasing every year. During the harvest period some plantation areas are burnt a few hours before the manual cutting, causing significant quantities of biomass burning aerosol to be injected into the atmosphere. During August 2010, a field campaign has been carried out in Ourinhos, situated in the south-western region of S̃ao Paulo State. A 2-channel Raman Lidar system and two meteorological S-Band Doppler Radars are used to indentify and quantify the biomass burning plumes. In addiction, CALIPSO Satellite observations were used to compare the aerosol optical properties detected in that region with those retrieved by Raman Lidar system. Although the campaign yielded 30 days of measurements, this paper will be focusing only one case study, when aerosols released from nearby sugar cane fires were detected by the Lidar system during a CALIPSO overpass. The meteorological radar, installed in Bauru, approximately 110 km northeast from the experimental site, had recorded echoes (dense smoke comprising aerosols) from several fires occurring close to the Raman Lidar system, which also detected an intense load of aerosol in the atmosphere. HYSPLIT model forward trajectories presented a strong indication that both instruments have measured the same air masss parcels, corroborated with the Lidar Ratio values from the 532 nm elastic and 607 nm Raman N2 channel analyses and data retrieved from CALIPSO have indicated the predominance of aerosol from biomass burning sources. © 2011 SPIE.

Structural changes in soybean seed coat due to harvest time and storage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Emergência de Rottboellia exaltata influenciada pela profundidade de semeadura, quantidade de palha de cana sobre o solo e aplicação de herbicidas residuais

Mechanical sugarcane harvest without burning and continuous straw on the soil surface may affect the Rottboellia exaltata infestation dynamics in sugarcane fields. Three greenhouse experiments were conducted with the aim of studying the effects of sowing depth (0, 2.5, 5, 7.5, and 10 cm), amount of sugarcane straw on the soil surface (0, 5, 10, and 15 ton ha-1), and residual herbicide (clomazone, flumioxazin, imazapyr, isoxaflutole, and s-metolachlor) on the emergence of Rottboellia exaltata. For each experiment, a completely randomized design with four replicates was applied. The combination of mulch on soil surface (especially with larger amounts of straw) with deeper sowing depths provides less emergence and mass accumulation of R. exaltata. In bare soil, the sowing depth did not affect the weed dynamics. Clomazone and imazapyr were effective herbicides controlling R. exaltata regardless of the amount of straw on the soil surface. Flumioxazin was also effective in controlling R. exaltata but only under bare soil conditions. Even with 60 mm of accumulated rainfall over the 4 day period after application, the amount of flumioxazin leached to the soil was not enough to ensure the same control observed when applying the herbicide on bare soil.

An analysis of diurnal cycles in the mass of ambient aerosols derived from biomass burning and agro-industry

Strong diurnal cycles in ambient aerosol mass were observed in a rural region of Southeast Brazil where the trace composition of the lower troposphere is governed mainly by emissions from agro-industry. An optical particle counter was used to record size-segregated aerosol number concentrations between 13 May 2010 and 15 March 2011. The data were collected every 10 min and used to calculate aerosol mass concentrations. Aerosol samples were also collected onto filters during daytime (10:00-16:00 local time) and nighttime (20:00-06:00) periods, for subsequent analysis of soluble ions and water-soluble organic carbon. Biomass burning aerosols predominated during the dry winter, while secondary aerosols were most important in the summer rainy season. In both seasons, diurnal cycles in calculated aerosol mass concentrations were due to the uptake of water by the aerosols and, to a lesser extent, to emissions and secondary aerosol formation. In neither season could the observed mass changes be explained by changes in the depth of the boundary layer. In the summer, nighttime increases in aerosol mass ranged from 2.7-fold to 81-fold, depending on particle size, while in the winter, the range was narrower, from 2.2-fold to 9.5-fold, supporting the possibility that the presence of particles derived from biomass burning reduced the overall ability of the aerosols to absorb water. Key Points Diurnal cycle of agro-industrial aerosol mass governed by humidity Biomass burning emissions act to suppress particle growth Need to consider diurnal mass cycles in aerosol dry deposition models ©2013. American Geophysical Union. All Rights Reserved.

Efeitos da exposição a queima de biomassa na função pulmonar e transportabilidade mucociliar e investigação de doenças ocupacionais dos trabalhadores rurais do setor canavieiro

Pós-graduação em Fisioterapia - FCT

Análise da viabilidade do aproveitamento da palha da cana de açúcar para cogeração de energia numa usina sucroalcooleira

Pós-graduação em Engenharia Mecânica - FEIS

Desenvolvimento de programa computacional aplicado ao empacotamento do palhiço de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho operacional de uma colhedora de cana-de-açucar ( Saccarum spp.) em função dos turnos de trabalho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influências do protocolo agroambiental do setor sucroalcooleiro na produção de açúcar, álcool e energia: estudo de caso em uma usina no interior do Estado de São Paulo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA