Ancient materials and techniques to improve the earthen building durability

A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.

Seismic-resistant building practices resulting from local seismic culture

Considering that vernacular architecture may bear important lessons on hazard mitigation, this chapter focuses on the European Mediterranean countries and studies traditional seismic-resistant architectural elements and techniques that local populations developed to prevent or repair earthquake damage. This area was selected as a case study because, as a highly seismic region, it has suffered the effect of many earthquakes along the history and, thus, regions within this area are prone to have developed a Local Seismic Culture. After reviewing seismic resistant construction concepts, a wide range of traditional construction solutions that, in many cases, have shown to improve the seismic performance of vernacular constructions of these regions is presented, as a contribution to the general overview of retrofitting building systems provided in this book. The main motivation is that most of these techniques can be successfully applied to preserve and to retrofit surviving examples without prejudice for their identity.

Aplicação do Building Information Modeling na gestão de projetos de construção

Dissertação de mestrado em Construção e Reabilitação Sustentáveis

Late-medieval construction site management at the Monastery of Jerónimos in Lisbon

Through the analysis of the exceptional accounting documents of 1517 related to the construction of the Monastery of Jerónimos (Lisbon), this paper discusses the main characteristics of a new model of construction site organization. In the later Middle Ages we can find, among others, two main models of constructing site organization. One, older and more widespread, consisted in a centralized and pyramidal management model. The other, apparently more recent, was based in the existence of several autonomous teams working simultaneously, each one responsible for building a specific part or section of the building. This paper describes and discusses this new organizational model as it was adopted and implemented by João de Castilho (1470–1552) for the construction of the Monastery of Jerónimos in 1517, probably for the first time in Portugal, but with some parallels in other places in Europe.

Promoting sustainability as a strategy to mitigate the effects of economic downturn on the construction industry

During the recent years followed by the Global Financial Crisis (GFC), most of business and industries around the globe have been hardly hit to the limit that it still struggling to survive, suffering from the crisis financial consequences. For instance, in the construction industry; many construction projects have been suspended or totally cancelled. Nevertheless, among this dilemma, a call has been raised to use the sustainable practices to mitigate the effects of the GFC on construction industry. For the first look, it seems that there is contradiction since the sustainable solutions are often associated with an increase in the initial cost, undoubtedly, the sustainable practices have many advantages in both economic and environment aspects, however, the question which needs to be addressed here is, to what extent using such sustainable practices can mitigate the negative effects of the economic downturn on construction industry. Therefore, it is a challenging argument for using such sustainable construction from its economic perspective, however, this paper is aiming to present the economical benefits of sustainable practices in construction industry, and trying to clear the doubt of the high initial costs of the sustainable construction through studying the life cycle benefit of green building.

Cost-effective energy and carbon emission optimization in building renovation – A case-study in a low income neighbourhood

Construction sector is one of the major responsible for energy consumption and carbon emissions and renovation of existing buildings plays an important role in the actions to mitigate climate changes. Present work is based on the methodology developed in IEA Annex 56, allowing identifying cost optimal and cost effective renovation scenarios improving the energy performance. The analysed case study is a residential neighbourhood of the municipality of Gaia in Portugal. The analysis compares a reference renovation scenario (without improving the energy performance of the building) with a series of alternative renovation scenarios, including the one that is being implemented.

A integração de técnicas BIM (Building Information Modeling) no projeto e na construção de estruturas de madeira

Dissertação de mestrado integrado em Engenharia Civil

Upgrade of an industrial building: BIM model of the as-built situation and evaluation of modifications

Dissertação de mestrado integrado in Civil Engineering

A integração do Building Information Modeling (BIM) num projeto de reabilitação

Dissertação de mestrado integrado em Engenharia Civil

Organization of construction activity in medieval Portugal: a comparative approach

This paper aims to identify and characterize the organizational models of construction site and building activity in late fifteenth and early sixteenth centuries, through the analysis of specific Portuguese case studies, related with important buildings financed by the royal power. This paper also intends to develop a comparative analysis between those different organizational models, identifying the main features of each one, as well as their similarities and differences. In this sense, we intend to present a comparative analysis between the two main models of organization of the construction site, through a methodology of crossing different types of sources, including written ones, such as books of accounts, but also iconographic and material sources, as well as the buildings and monuments still preserved today. In terms of written sources, the construction site accounting books allow us to study several specific aspects of the construction process, but also allow us to infer the organizational models of the construction activity.

Implementing a site waste management plan: a case study of a medium sized building contractor in Ireland

Construction and demolition waste management is becoming increasingly important on construction sites as landfill space in Ireland is rapidly depleting and waste management costs are rising. Due to these factors waste management plans are seen as a good response to minimising waste on site and this thesis aims to investigate how to implement such a plan on a practical case study as well as investigating the legislation regarding construction and demolition waste along with market availability for the reuse of the waste. Main contractor surveys were also carried out in order to gain a better understanding of current attitudes within the industry and these surveys are analysed in chapter five. A survey was also carried out among sub-contractors but this survey has not been used for this thesis as the study is on-going. The primary aim of this thesis is to examine the waste hierarchy opportunities that are available for construction and demolition waste in Ireland and to examine the effects of management strategies on construction and demolition waste reduction at the project level. A partnership was developed with Carey Developments Ltd in Co. Galway and an analysis of their waste management practices was undertaken. The primary case study will be the ‘Taylors Hill’ project in Co. Galway where work commenced in March, 2012. The secondary aim of the thesis is to develop specific waste minimisation strategies for the company and to develop a training tool kit for use on site.

The financial sustainability of passive house construction in Ireland.

In Ireland the average energy cost for a household in 2006 was estimated to be €1,767, an increase of 4% on 2005 figures. With the state o f the current economic climate, home owners are beginning to realise the potential of energy efficient construction methods. The Passive House Standard offers a cost efficient and sustainable construction solution compared to the Traditional Irish construction methods. This report focuses on the Cost comparison between Passive House construction and traditional construction methods. The report also focuses on barriers that are slowing market penetration of the Passive House standard in the Irish Market. It also identifies potential energy savings that passive house occupants would benefit from. The report also highlights professional opinions on the future development o f the Passive House Standard in Ireland. The conclusions of this report are that the Passive House Standard is a more financially suitable construction solution compared to that o f a traditional dwelling complying with the Irish Building Regulations. The report also concludes that the Passive House Standard won’t be introduced as an Irish Building Regulation in the future but that it will have a big impact on future building regulations. The hypothesis o f this report is supported by data obtained from a literature review, qualitative data analysis and a case study. The report recommends that in order for the Passive House Standard to penetrate further into the Irish construction market, various barriers must be rectified. Local manufactures must start producing suitable components that suit the Passive House specification. The Building Energy Rating system must be altered in order for the Passive House to achieve its potential BER rating.

An analysis of the use of photogrammetric sorting to audit construction and demolition waste production on site

This study analyses the area of construction and demolition waste (C & D W) auditing. The production of C&DW has grown year after year since the Environmental Protection Agency (EPA) first published a report in 1996 which provided data for C&D W quantities for 1995 (EPA, 1996a). The most recent report produced by the EPA is based on data for 2005 (EPA, 2006). This report estimated that the quantity of C&DW produced for that period to be 14 931 486 tonnes. However, this is a ‘data update’ report containing an update on certain waste statistics so any total provided would not be a true reflection of the waste produced for that period. This illustrates that a more construction site-specific form of data is required. The Department of Building and Civil Engineering in the Galway-Mayo Institute of Technology have carried out two recent research projects (Grimes, 2005; Kelly, 2006) in this area, which have produced waste production indicators based on site-specific data. This involved the design and testing of an original auditing tool based on visual characterisation and the application of conversion factors. One of the main recommendations of these studies was to compare this visual characterisation approach with a photogrammetric sorting methodology. This study investigates the application of photogrammetric sorting on a residential construction site in the Galway region. A visual characterisation study is also carried out on the same project to compare the two methodologies and assess the practical application in a construction site environment. Data collected from the waste management contractor on site was also used to provide further evaluation. From this, a set of waste production indicators for new residential construction was produced: □ 50.8 kg/m2 for new residential construction using data provided by the visual characterisation method and the Landfill Levy conversion factors. □ 43 kg/m2 for new residential construction using data provided by the photogrammetric sorting method and the Landfill Levy conversion factors. □ 23.8 kg/m2 for new residential construction using data provided by Waste Management Contractor (WMC). The acquisition of the data from the waste management contractor was a key element for testing of the information produced by the visual characterisation and photogrammetric sorting methods. The actual weight provided by the waste management contractor shows a significant difference between the quantities provided.

Systematic Construction of Goal-Oriented COTS Taxonomies

Informe de investigación realizado a partir de una estancia en el Department of Computer and Information Science de la Norwegian University of Science and Technology (NTNU), Noruega, entre setiembre i diciembre de 2006. El uso de componentes de software llamados Commercial-Off-The-Shelf (COTS) en el desarrollo de sistemas basados en componentes implica varios retos. Uno de ellos es la falta de información disponible y adecuada para dar soporte al proceso de selección de componentes a ser integrados. Para lidiar con estos problemas, se esta desarrollando un trabajo de tesis que propone un método llamado GOThIC (Goal-Oriented Taxonomy and reuse Infrastructure Construction). El método está orientado a construir una infrastructura de reuse para facilitar la búsqueda y reuse de componentes COTS. La estancia en la NTNU, reportada en este documento, tuvo como objetivo primordial las mejora del método y la obtención de datos empíricos para darle soporte. Algunos de los principales resultados fueron la obtención de datos empíricos fundamentando la utilización del método en ámbitos industriales de selección de componentes COTS, así como una nueva estrategia para conseguir de forma factible e incremental, la federación y reuso de los diferentes esfuerzos existentes para encontrar, seleccionar y mantener componentes COTS y Open Source (OSS) -comúnmente llamados componentes Off-The-Shelf (OTS) - en forma estructurada.

La participation des consommateurs à la construction de l'autorité des normes internationales : vers une économie politique internationale de la traduction

Cette thèse explore les implications politiques de la montée en puissance des normes internationales sur nos sociétés contemporaines et pose la problématique des dynamiques participatives des représentants des consommateurs au sein des formes de pouvoir non étatique à l'aide du cas de l'Organisation internationale de normalisation (ISO). Le renforcement du pouvoir des normes internationales et autres spécifications techniques soulève d'importants enjeux démocratiques qui portent aussi bien sur la représentativité des acteurs qui les élaborent, sur l'articulation des prérogatives publiques et privées dans la gouvernance de la mondialisation, que sur le rôle de l'expertise dans la reconnaissance de ces nouvelles formes de pouvoir. La participation du monde associatif intervient sur ces différents enjeux de manière complexe. Cette recherche s'inscrit à la suite des études en relations internationales/économie politique internationale sur les formes d'autorité non étatique et s'inspire du concept de traduction issu de la sociologie des sciences et techniques pour mettre en lumière le rôle des spécifications techniques dans la construction d'une société de consommation centrée sur la liberté de choix et la façon dont les associations de consommateurs se saisissent des arènes de normalisation pour y faire valoir des préoccupations collectives, leur expertise et leur identité. Cette thèse défend l'idée que les consommateurs participent à la construction de l'autorité des normes internationales par leur rôle dans la traduction qui permet de relier les spécifications techniques au fonctionnement des marchés, au cadre réglementaire de la loi et aux préoccupations sociétales. L'analyse repose sur une observation ethnographique des délibérations d'un comité technique de l'ISO, une recherche-­‐action, la réalisation d'entretiens et la consultation de documents d'archives de l'ISO. -- This thesis explores the political significance of the rise of international standards on contemporary societies and questions the participatory dynamics of consumers' representatives within nonstate forms of power, using the case of the International organization for standardization (ISO). The power granted to international standards and other technical specifications raises important democratic issues regarding the representativity of standard-­‐ writers, the public-­‐private relationships involved in this form of governance or the expertise sustaining the recognition of such new forms of power. The participation of civil society associations affect such issues in complex ways. This research relies on international relations/international political economy approaches of nonstate authority and takes inspiration from the concept of translation developed by science and technology studies to highlight the crucial role played by technical specifications in building a consumer society based on the freedom of choice as well as how consumers' associations take stock of standardization arenas to promote collective issues and claim their expertise and identity. This thesis argues that consumers contribute to the construction of the authority of international standards through their role in the translation that links international standards to the market society, the regulatory state as well as to societal preoccupation. The analysis is based on an ethnographic observation of deliberations within an ISO technical committee, a research-­‐action, interviews as well as on the consultation of ISO archives.