927 resultados para Biphasic scaffold
Resumo:
Leishmania braziliensis braziliensis(MHOM/BR/75/M2903) was grown in Schneider's Drosophila medium. In one set of experiments promastigotes were already adapted to the medium by means of serial passages whereas in the second cells were grown in a biphasic medium and transfered to the liquid. Growth was more abundant for culture medium adapted cells; degenerate cells in small numbers as well as dead ones were present from day 5 for promastigotes adapted to liquid medium and from day 3 for newly adapted cells. Synthesis of surface antigens differed according to length of cell culture as assessed by the titer of five mucocutaneous leishmaniasis sera on subsequent days. Five days of culture for cells already adapted to the culture medium and 3 days for newly adapted ones were judged to be the best for the preparation of immunofluorescence antigens.
Resumo:
We studied the susceptibility to Leishmania (Viannia) panamensis in strains of mice. The C57BL/6 strain was resistant and showed self-controlled lesion at the injected foot pad. The BALB/c and DBA/2J strains were susceptible and showed a foot swelling that started day 20 post-infection and progressed to a tumour-like lesion in later period of observation. The CBA/HJ strain was found to be of intermediary resistance. In contrast to other known cutaneous leishmaniasis in mice, the lesion in L. (V.) panamensis-infected mice was restricted to the inoculation site in the skin. In addition, we studied the development of cellular response and antibodies against Leishmania antigen in BALB/c and C57BL/6 strains. The proliferative response of lymph node cells against L. (V.) panamensis antigen was biphasic in both strains. An initial response was seen on day 20, followed by a refractory period between 40 and 80 days and a second response around fourth month post-infection. The response in the latter period was higher in C57BL/6 strain than in BALB/c strain. BALB/c strain presented much higher anti-Leishmania antibody level than C57BL/6 strain. The model and the correlation of immunological variables and the course of the infection are discussed.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquimica
Resumo:
During myocardial ischemia and reperfusion both purines and pyrimidines are released into the extracellular milieu, thus creating a signaling wave that propagates to neighboring cells via membrane-bound P2 purinoceptors activation. Cardiac fibroblasts (CF) are important players in heart remodeling, electrophysiological changes and hemodynamic alterations following myocardial infarction. Here, we investigated the role UTP on calcium signaling and proliferation of CF cultured from ventricles of adult rats. Co-expression of discoidin domain receptor 2 and -smooth muscle actin indicate that cultured CF are activated myofibroblasts. Intracellular calcium ([Ca2+]i) signals were monitored in cells loaded with Fluo-4 NW. CF proliferation was evaluated by the MTT assay. UTP and the selective P2Y4 agonist, MRS4062, caused a fast desensitizing [Ca2+]i rise originated from thapsigargin-sensitive internal stores, which partially declined to a plateau providing the existence of Ca2+ in the extracellular fluid. The biphasic [Ca2+]i response to UTP was attenuated respectively by P2Y4 blockers, like reactive blue-2 and suramin, and by the P2Y11 antagonist, NF340. UTP and the P2Y2 receptor agonist MRS2768 increased, whereas the selective P2Y11 agonist NF546 decreased, CF growth; MRS4062 was ineffective. Blockage of the P2Y11receptor or its coupling to adenylate cyclase boosted UTP-induced CF proliferation. Confocal microscopy and Western blot analysis confirmed the presence of P2Y2, P2Y4 and P2Y11 receptors. Data indicate that besides P2Y4 and P2Y2 receptors which are responsible for UTP-induced [Ca2+]i transients and growth of CF, respectively, synchronous activation of the previously unrecognized P2Y11 receptor may represent an important target for anti-fibrotic intervention in cardiac remodeling.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica
Resumo:
Dissertação para obtenção do Grau de Doutor em Biologia
Resumo:
Dissertation presented to obtain the Ph.D degree in Biology
Resumo:
Dissertation presented to obtain the Ph.D degree in Biology
Resumo:
RESUMO: A Legionella é um bacilo Gram-negativo que replica dentro de protozoários como Acanthamoeba castellanii (A. castellanii) e no interior de macrófagos alveolares humanos, podendo resultar numa pneumonia grave. A Legionella em meio líquido tem um ciclo de vida bifásico, apresentando traços replicativos na fase exponencial e expressando factores transmissíveis na fase estacionária. Estudos recentes demonstraram que a Legionella precisa de assegurar um tempo preciso no seu ciclo de vida para efectuar com êxito a infecção das células hospedeiras. Muitos modelos de estudo foram desenvolvidos a fim de aumentar o conhecimento sobre o ciclo de vida intracelular e identificar os genes necessários para a modulação da célula hospedeira. Embora o conhecimento sobre a interacção bactéria-hospedeiro ainda seja limitado, parece que esta interacção gera um conjunto de características de virulência permitindo que a bactéria infecte células fagocíticas humanas e cause doença. O objectivo do presente projecto de investigação foi investigar e seleccionar genes críticos para a infecciosidade da Legionella pneumophila estirpe Paris (Lp Paris), desenhar e optimizar uma técnica de PCR em tempo real para o estudo da expressão génica e comparar o perfil de expressão da Lp Paris antes e depois da co-cultura em A. castellanii. Os resultados mostraram que oito dos 12 genes em estudo alteraram a sua expressão relativa após co-cultura em A. castellanii quando os ensaios foram realizados com culturas de Lp Paris na fase estacionária precoce (cinco foram induzidos e três reprimidos) Quando os ensaios foram realizados com culturas de Lp Paris na fase estacionária tardia 11 genes apresentaram repressão na sua expressão relativa. Analisando os resultados, concluímos que o perfil de expressão de Lp Paris foi modificado pela interacção com A. castellanii, no entanto essa mudança foi dependente da fase do seu ciclo de vida.-------ABSTRACT: Legionella is a pathogenic Gram-negative bacterium that replicates not only within aquatic protozoa like Acanthamoeba castellanii (A. castellanii), but also within human alveolar macrophages, which can result in a severe pneumonia. Legionella has a biphasic life cycle in broth, where exponential phase cultures display replicative traits and stationary bacteria express transmissive factors. Recent studies demonstrated that for successful infection of host cells, Legionella needs to ensure a precise timing of its life cycle. Many models of study were developed in order to learn about the intracellular life cycle and to identify the genes necessary for the host cell modulation. Although knowledge about the bacteria-host interaction is still limited, it appears that this interaction generate a pool of virulence traits, allowing the bacterium to infect human phagocytic cells and cause disease. The purpose of the present study was to investigate and select de critical genes for the infectivity of Legionella pneumophila strain Paris (Lp Paris), design and optimize a real time PCR technique for gene expression study and compare the expression profile of Lp Paris before and after co- culture of A. castellanii. The results show that eight of 12 genes in study changed its relative expression after coculture in A. castellanii when we performed the intracellular assays with early stationary phase Lp Paris cultures (five were induced and tree were repressed). When we performed the intracellular assays with late stationary phase Lp Paris cultures 11 genes showed a repressed relative expression. Analysing the results, we conclude that the expression profile of Lp Paris was modified by interaction with A. castellanii but this change was dependent of the timing of its life cycle.
Resumo:
Dissertação apresentada para a obtenção do Grau de Mestre em Biotecnologia, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia
Resumo:
It is important to have better evaluation and understanding of the motor neuron physiology, with the goal to early and objectively diagnose and treat patients with neurodegenerative pathologies. The Compound Muscle Action Potential (CMAP) scan is a non-invasive diagnosis technique for neurodegenerative pathologies, such as ALS, and enables a quick analysis of the muscle action potentials in response to motor nerve stimulation. This work aims to study the influence of different pulse modulated waveforms in peripheral nerve excitability by CMAP scan technique on healthy subjects. A total of 13 healthy subjects were submitted to the same test. The stimuli were applied in the medium nerve on the right wrist and electromyography signal collected on the Abductor Pollicis Brevis (APB) muscle surface on the right thumb. Stimulation was performed with an increasing intensities range from 4 to 30 mA, with varying steps, 3 stimuli per step. The procedure was repeated 4 times per subject, each repetition using a different single pulse stimulation waveform: monophasic square, monophasic triangular, monophasic quadratic and biphasic square. Results were retrieved from the averaging of the stimuli on each current intensity step. The square pulse needs less current intensity to generate the same response amplitude regarding the other waves and presents a more steep curve slope and this effect is gradually decreasing for the triangular and quadratic pulse,respectively, being the difference even more evident regarding the biphasic pulse. The control of the waveform stimulation pulse allows varying the stimulusresponse curve slope.
Resumo:
A produção de estruturas tridimensionais poliméricas tem sido foco de estudo por parte da Engenharia de Células e Tecidos, pelo que mimetizam melhor as condições in vivo dos tecidos. A conjugação das propriedades eléctricas com arquitectura 3D permite uma regeneração tecidual mais eficaz. Desta forma este estudo incidiu na construção de scaffolds, que conjugasse as propriedades mecânicas, eléctricas e biológicas num só suporte. O processo utilizado para produção de scaffolds baseou-se na electrofiação de soluções poliméricas de PCL (8% m/m) com incorporação de óxido de grafeno em diferentes concentrações: 0.01%, 0.1% e 0.25% (m/V). Foram avaliados os parâmetros de electrofiação que permitiram a organização tridimensional. A composição química e a morfologia das membranas foram avaliadas por FTIR-ATR e por microscopia electrónica de varrimento (MEV), respectivamente. Através de ensaios de tracção e de permeabilidade estudou-se a influência de óido de grafeno na matriz polimérica. Foram feitas experiências de redução de óxido de grafeno nas fibras electrofiadas, tanto nas membranas como das espumas, através do uso de vapores de hidrazina. Este mecanismo mostrou-se ineficaz, uma vez que afectou a sua morfologia. As espumas foram avaliadas quanto à sua bioactividade e propriedades mecânicas (ensaios de compressão). Também foram realizados testes de viabilidade celular nas membranas e de adesão celular nas espumas, de forma a avaliar o seu potencial para aplicação biomédica. Os resultados destes ensaios revelaram que óxido de grafeno não apresenta efeitos citotóxicos para o organismo e a sua presença promove a adesão celular ao scaffold.
Resumo:
In orthopaedics, the management and treatment of osteochondral (OC) defects remains an ongoing clinical challenge. Autologous osteochondral mosaicplasty has been used as a valid option for OC treatments although donor site morbidity remains a source of concern [1]. Engineering a whole structure capable of mimicking different tissues (cartilage and subchondral bone) in an integrated manner could be a possible approach to regenerate OC defects. In our group we have been proposing the use of bilayered structures to regenerate osteochondral defects [2,3]. The present study aims to investigate the pre-clinical performance of bilayered hydrogels and spongy-like hydrogels in in vivo models (mice and rabbit, respectively), in both subcutaneous and orthotopic models. The bilayered structures were produced from Low Acyl Gellan Gum (LAGG) from Sigma-Aldrich, USA. Cartilage-like layers were obtained from a 2wt% LAGG solution. The bone-like layers were made of 2wt% LAGG with incorporation of hydroxyapatite at 20% and 30% (w/v). Hydrogels and spongy-like were subcutaneouly implanted in mice to evaluate the inflammatory response. Then, OC defects were induced in rabbit knee to create a critical size defect (4 mm diameter and 5 mm depth), and then hydrogels and sponges implanted. Both structures followed different processing methods. The hydrogels were injected allowing in situ crosslinking. Unlike, the spongy-like were pre-formed by freeze-drying. The studies concerning subcutaneous implantation and critical size OC defect were performed for 2 and 4 weeks time, respectively. Cellular behavior and inflammatory responses were assessed by means of histology staining and biochemical function and matrix deposition by immunohistochemistry. Additionally, both OC structures stability and new cartilage and bone formation were evaluated by using vivo- computed tomography (Scanco 80). The results showed no acute inflammatory response for both approaches. New tissue formation and integration in the adjacent tissues were also observed, which present different characteristic behaviors when comparing hydrogels and sponges response. As future insights, a novel strategy for regeneration of OC defects can be designed encompassing both, hydrogels and spongy-like structures and cellular approaches. References: 1. Espregueira-Mendes J. et al. Osteochondral transplantation using autografts from the upper tibio-fibular joint for the treatment of knee cartilage lesions. Knee Surgery, Sports Traumatology, Arthroscopy 20,1136, 2012. 2. Oliveira JM. et al, Novel hydroxyapatite/chitosan bilayered scaffold for osteochondral tissue-engineering applications: Scaffold design and its performance when seeded with goat bone marrow stromal cells. Biomaterials 27, 6123, 2006. 3. Pereira D R. et al. Gellan Gum-Based Hydrogel Bilayered Scaffolds for Osteochondral Tissue Engineering. Key Engineering Materials 587, 255, 2013.
Resumo:
The thymus is the central organ responsible for the generation of T lymphocytes (1). Various diseases cause the thymus to produce in- sufficient T cells, which can lead to immune-suppression (2). Since T cells are essential for the protection against pathogens, it is crucial to promote de novo differentiation of T cells on diseased individuals. The available clinical solutions are: 1) one protocol involving the transplant of thymic stroma from unrelated children only applicable for athymic children (3); 2) for patients with severe peripheral T cell depletion and reduced thymic activity, the administration of stimu- lating molecules stimulating the activity of the endogenous thymus (4). A scaffold (CellFoam) was suggested to support thymus regen- eration in vivo (5), although this research was discontinued. Herein, we propose an innovative strategy to generate a bioartificial thymus. We use a polycaprolactone nanofiber mesh (PCL-NFM) seeded and cultured with human thymic epithelial cells (hTECs). The cells were obtained from infant thymus collected during pediatric cardio-tho- racic surgeries. We report new data on the isolation and characterization of those cells and their interaction with PCL-NFM, by expanding hTECs into relevant numbers and by optimizing cell seeding methods.
Resumo:
Tissue engineering often rely on scaffolds for supporting cell differentiation and growth. Novel paradigms for tissue engineering include the need of active or smart scaffolds in order to properly regenerate specific tissues. In particular, as electrical and electromechanical clues are among the most relevant ones in determining tissue functionality in tissues such as muscle and bone, among others, electroactive materials and, in particular, piezoelectric ones, show strong potential for novel tissue engineering strategies, in particular taking also into account the existence of these phenomena within some specific tissues, indicating their requirement also during tissue regeneration. This referee reports on piezoelectric materials used for tissue engineering applications. The most used materials for tissue engineering strategies are reported together with the main achievements, challenges and future needs for research and actual therapies. This review provides thus a compilation of the most relevant results and strategies and a start point for novel research pathways in the most relevant and challenging open questions.