998 resultados para Biomateriais biológico e sintético
Resumo:
Visando fornecer subsídios para elaboração de sistema de manejo integrado das grandes massas de plantas daninhas aquáticas submersas em lagos e represas, o presente trabalho teve como objetivo verificar a eficiência do pacu (Piaractus mesopotamicus) como agente de controle biológico de Egeria densa, E. najas e Ceratophyllum demersum. As espécies de plantas daninhas foram oferecidas individualmente, duas a duas e as três espécies juntas. Verificou-se que este peixe tem uma eficiência média de controle dessas plantas daninhas variando entre 28 e 100%, podendo eliminar uma massa verde dessas plantas, com a mesma quantidade de seu peso, em sete dias. A eficiência de controle diária aumentou com o tempo de predação. O pacu é mais seletivo para E. densa ou E. najas quando na presença de C. demersum. Não ocorreu alteração na eficiência de controle do pacu sobre E. densa ou E. najas em todos os tratamentos e nos três períodos estudados (três, cinco e sete dias).
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
O objetivo deste trabalho foi avaliar a capacidade de microrganismos de manguezais para controlar a podridão radicular causada por Pythium aphanidermatum e para promover o crescimento em pepino hidropônico (Cucumis sativus). Avaliaram-se 19 microrganismos quanto ao controle da doença em mini-hidroponia. Os microrganismos mais promissores para esse fim - Gordonia rubripertincta SO-3B-2 e a mistura dos isolados G. rubripertincta SO-3B-2, MB-P3A-49, MB-P3-C68 e SO-3L-3, de Pseudomonas stutzeri, e Bacillus cereus AVIC-3-6 - foram, posteriormente, testados quanto à promoção de crescimento do pepineiro, em casa de vegetação. Microrganismos de manguezais podem ter importância funcional no controle biológico da podridão radicular causada por P. aphanidermatum e na promoção do crescimento do pepineiro cultivado em hidroponia. Os microrganismos G. rubripertincta SO-3B-2 e P. stutzeri MB-P3A-49 são promissores na promoção do crescimento das plantas não infestadas com o patógeno.
Resumo:
With water pollution increment at the last years, so many progresses in researches about treatment of contaminated waters have been developed. In wastewaters containing highly toxic organic compounds, which the biological treatment cannot be applied, the Advanced Oxidation Processes (AOP) is an alternative for degradation of nonbiodegradable and toxic organic substances, because theses processes are generation of hydroxyl radical based on, a highly reactivate substance, with ability to degradate practically all classes of organic compounds. In general, the AOP request use of special ultraviolet (UV) lamps into the reactors. These lamps present a high electric power demand, consisting one of the largest problems for the application of these processes in industrial scale. This work involves the development of a new photochemistry reactor composed of 12 low cost black light fluorescent lamps (SYLVANIA, black light, 40 W) as UV radiation source. The studied process was the photo-Fenton system, a combination of ferrous ions, hydrogen peroxide, and UV radiation, it has been employed for the degradation of a synthetic wastewater containing phenol as pollutant model, one of the main pollutants in the petroleum industry. Preliminary experiments were carrier on to estimate operational conditions of the reactor, besides the effects of the intensity of radiation source and lamp distribution into the reactor. Samples were collected during the experiments and analyzed for determining to dissolved organic carbon (DOC) content, using a TOC analyzer Shimadzu 5000A. The High Performance Liquid Chromatography (HPLC) was also used for identification of the cathecol and hydroquinone formed during the degradation process of the phenol. The actinometry indicated 9,06⋅1018 foton⋅s-1 of photons flow, for 12 actived lamps. A factorial experimental design was elaborated which it was possible to evaluate the influence of the reactants concentration (Fe2+ and H2O2) and to determine the most favorable experimental conditions ([Fe2+] = 1,6 mM and [H2O2] = 150,5 mM). It was verified the increase of ferrous ions concentration is favorable to process until reaching a limit when the increase of ferrous ions presents a negative effect. The H2O2 exhibited a positive effect, however, in high concentrations, reaching a maximum ratio degradation. The mathematical modeling of the process was accomplished using the artificial neural network technique
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Petroleum Refinery wastewaters (PRW) have hart-to-degrade compounds, such as: phenols, ammonia, cyanides, sulfides, oils and greases and the mono and polynuclear aromatic hydrocarbons: benzene, toluene and xylene (BTX), acenaphthene, nitrobenzene and naphtalene. It is known that the microrganisms activity can be reduced in the presence of certain substances, adversely affecting the biological process of wastewater treatment. This research was instigated due the small number of studies regarding to this specific topic in the avaiable literature. This body of work ims to evaluate the effect of toxic substances on the biodegradability of the organic material found in PRW. Glucose was chosen as the model substrate due to its biodegradable nature. This study was divided into three parts: i) a survey of recalcitants compounds and the removal of phenol by using both biological and photochemical-biological processes; ii) biomass aclimation and iii) evaluation of the inhibitory effect certain compounds have on glucose biodegradation. The phenol degradation experiments were carried out in an activity sludge system and in a photochemical reactor. The results showed the photochemical-biological process to be more effective on phenol degradation, suggesting the superioruty of a combined photochemical-biological treatment when compared with a simple biological process for phenol removal from industry wastewaters. For the acclimation step, was used an activated sludge from industrial wastewaters. A rapid biomass aclimation to a synthetic solution composed of the main inhibitory compouns fpund in a PRW was obtained using the following operation condition: (pH = 7,0; DO ≥ 2,0 mg/L; RS = 20 days e qH = 31,2 and 20,4 hours), The last part was consisted of using respirometry evaluation toxicity effects of selected compounds over oxygen uptake rate to adaptated and non adaptated biomass in the presence of inhibitory compounds. The adaptated sludge showed greater degration capacity, with lower sensibility to toxic effects. The respirometry has proved to be very practical, as the techiniques used were simple and rapid, such as: Chemical Oxygen Demand (COD), Dissolved Oxygen (DO), and Volatile Suspended Solids (VSS). Using the latter it is possible to perform sludge selection to beggingthe process; thus allowing its use for aerobic treatment system`s behacior prediction
Resumo:
The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils
Resumo:
O objetivo deste estudo foi avaliar o processo de aprendizagem motora de uma habilidade complexa da Ginástica Artística a partir da observação de demonstrações de modelos de pontos de luz e vídeo. Dezesseis participantes divididas em grupos dos respectivos modelos executaram um pré-teste, seguido de 100 tentativas de uma parada de mãos, igualmente distribuídas em blocos de 10 tentativas em dois dias, alternando períodos de demonstração e prática, com um teste de retenção após um dia. Cinemática de braço, tronco e perna das participantes possibilitaram análise da semelhança entre a coordenação de cada participante e do modelo e do tempo de movimento; a performance das participantes também foi avaliada por duas especialistas em Ginástica Artística. Ambas as análises indicaram que os grupos não diferiram. Os resultados são discutidos em termos da hipótese de suficiência de informação nos modelos de movimento biológico particularmente aplicada ao processo de aprendizagem de habilidades motoras complexas.
Resumo:
The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis
Resumo:
The construction of wells is one of the most important activities of the oil industry. The drilling process is the set of activities and operations to design, program and perform the opening thereof. During this process, the cuttings are removed by the drilling fluid, or mud, and carted to the surface. This fluid is injected into the drill string and returns to the surface through the annular space between the well walls and the drill string. After the descent of the column casing, the annular space between the casing string and the walls of the borehole is filled with cement so as to secure the spine and prevent any migration of fluids between the various permeable zones traversed by the well behind of the coating. To ensure the good quality of the cementation scrubbers are used mattresses which are pumped ahead of the cement slurry so as to avoid contamination of the drilling fluid paste, or vice versa, and assist in the removal of plaster, formed by drilling fluid of the borehole walls, thus enabling a better cement bond to the well. Within this context, this work aims to evaluate the efficiency of mattresses scrubbers, the basis of ionic and nonionic surfactants, on the removal of nonaqueous drilling fluid, based on n-paraffin in oil wells, and the compatibility between the Mattress relations washer / drilling fluid bed scrubber / cement paste mattress washer / cement slurry / drilling fluid and the drilling fluid / cement slurry using laboratory tests rheology, thickening time and compressive strength. Also technique was performed X-ray diffraction (XRD) for a more detailed analysis of these mixtures with hydrated cement paste. In compatibility tests the conditions of temperature and pressure used in the same laboratory procedure simulating the conditions of oil wells, the well is considered the depth of 800 m. The results showed that the compositions of the mattress washer nonionic, KMS obtained a 100% efficient in removing the non-aqueous drilling fluid, and the best formulation showed good results with respect to compliance testing
Resumo:
O objetivo deste estudo foi compreender o significado dos acidentes de trabalho com exposição a material biológico na perspectiva dos profissionais de enfermagem. de caráter exploratório com abordagem qualitativa pela análise de conteúdo de Bardin. No período de 2001 a 2006 ocorreram 87 acidentes com material biológico, sendo que destes, oito eram soropositivos para hepatite B e C e Síndrome da Imunodeficiência Adquirida/Vírus da Imunodeficiência Humana. Para coleta de dados utilizou-se entrevista com perguntas norteadoras. Ao indagar esses profissionais sobre o significado dos acidentes, emergiram quatro categorias: situação de risco; percepção de perigo; fatalidade e sentimentos. Embora não seja estratégia de esclarecimento, mas é fato que organização de trabalho e ações educativas tem impacto considerável para diminuir esse tipo de acidente, diminuindo prejuízos na vida dos acidentados.
Resumo:
Objetivou-se avaliar o crescimento de novilhas de diferentes grupos genéticos no sistema de produção superprecoce. Utilizaram-se 132 novilhas dos seguintes grupos genéticos: 18 ¾ Canchim × ¼ Nelore (¾ CN); 18 ½ Canchim × ½ Nelore (½ CN); 24 Simbrasil -⅝ Simental × ⅜ Nelore; e 72 Three-cross ¼ Simental × ¼ Nelore × ½ Angus. As novilhas foram desmamadas aos 210 dias de idade, com 247,4 ± 16,5 kg de peso vivo (PV), mantidas em creep-feeding durante a fase de cria e confinadas por 132 ± 14 dias até atingirem 350 kg PV e 5 mm de gordura subcutânea, quando, então, foram abatidas. Os grupos genéticos não influenciaram o ganho de peso médio diário, porém a espessura de gordura subcutânea do dorso (EGS) e da garupa (EGG) foi maior nos animais Three-cross, que apresentaram os maiores valores iniciais (1,07 kg/dia). Não houve diferença na área de olho-de-lombo (AOL) inicial, porém a os animais Three-cross apresentaram os maiores valores iniciais. Nos animais do grupo Three-cross, a área de olho-de-lombo (AOL) final e ajustada para 100 kg de peso vivo (PV) foi inferior à observada nos demais grupos, porém o peso final foi superior ao do grupo Simbrasil, com tempo intermediário de confinamento. Ajustando-se os valores de AOL e EGG para o menor número de dias de confinamento (114 dias), animais Simbrasil apresentam maior valor de AOL final e os animais Three-cross e Simbrasil, maior EGG final.
Resumo:
Raciocinando no contexto do programa neomecanicista para a Biologia, estudamos a natureza do processamento de informação no sistema vivo em geral, e no cérebro humano em particular, onde uma aplicação do modelo da Auto-Organização nos conduz à hipótese do Supercódigo. Este seria um programa mental, molecularmente codificado, responsável pelas competências inatas, como a competência lingüística. Fazemos também uma comparação entre nossa hipótese e a da Linguagem do Pensamento, proposta por Jerry Fodor.
Resumo:
OBJETIVO: Analisar a distribuição dos acidentes de trabalho com exposição a material biológico das fichas de notificação registradas no Centro de Referência de Saúde do Trabalhador de Londrina, traçando um perfil dos profissionais acidentados. MÉTODOS: Trata-se de um estudo retrospectivo descritivo, com abordagem quantitativa, realizado através de um levantamento nas 253 fichas de notificação de acidentes com material biológico que foram encaminhadas das instituições de saúde da área de abrangência ao Centro de Referência em Saúde do Trabalhador do município de Londrina-PR, no período de janeiro a dezembro de 2006. Os dados foram processados e tabulados eletronicamente, utilizando-se o programa Epi Info, de domínio público. RESULTADOS: Das 253 fichas de notificação de acidentes com material biológico analisadas, verificou-se que 92,5% foram causados por objetos perfuro-cortantes e 39,5% ocorreram em auxiliares de enfermagem. Constatou-se também que 73,5% eram do sexo feminino, 24,1% ocorreram em Unidades Básicas de Saúde, 74,3% encontravam-se com situação vacinal para Hepatite B atualizada e 49,8% ocorreram na rede pública de saúde. CONCLUSÃO: Com o levantamento do perfil dos profissionais acidentados com exposição a material biológico, o CEREST Londrina identificou que a profissão mais atingida foram os auxiliares de enfermagem, as mulheres, e que grande parte dos acidentes ocorreram nas UBSs com material perfuro-cortante. Mostrou-se que coletores de lixo passaram a fazer parte das profissões envolvidas nos acidentes.