Microextraction techniques coupled to liquid chromatography with mass spectrometry for the determination of organic micropollutants in environmental water samples

[EN]Until recently, sample preparation was carried out using traditional techniques, such as liquid–liquid extraction (LLE), that use large volumes of organic solvents. Solid-phase extraction (SPE) uses much less solvent than LLE, although the volume can still be significant. These preparation methods are expensive, time-consuming and environmentally unfriendly. Recently, a great effort has been made to develop new analytical methodologies able to perform direct analyses using miniaturised equipment, thereby achieving high enrichment factors, minimising solvent consumption and reducing waste. These microextraction techniques improve the performance during sample preparation, particularly in complex water environmental samples, such as wastewaters, surface and ground waters, tap waters, sea and river waters. Liquid chromatography coupled to tandem mass spectrometry (LC/MS/MS) and time-of-flight mass spectrometric (TOF/MS) techniques can be used when analysing a broad range of organic micropollutants. Before separating and detecting these compounds in environmental samples, the target analytes must be extracted and pre-concentrated to make them detectable. In this work, we review the most recent applications of microextraction preparation techniques in different water environmental matrices to determine organic micropollutants: solid-phase microextraction SPME, in-tube solid-phase microextraction (IT-SPME), stir bar sorptive extraction (SBSE) and liquid-phase microextraction (LPME). Several groups of compounds are considered organic micropollutants because these are being released continuously into the environment. Many of these compounds are considered emerging contaminants. These analytes are generally compounds that are not covered by the existing regulations and are now detected more frequently in different environmental compartments. Pharmaceuticals, surfactants, personal care products and other chemicals are considered micropollutants. These compounds must be monitored because, although they are detected in low concentrations, they might be harmful toward ecosystems.

Entwicklung massenspektrometrischer Isotopenverdünnungstechniken für die zuverlässige Bestimmung von Elementspuren und Schwefelspezies in Erdölprodukten

Einer der Hauptschwerpunkte der Arbeit lag in der Entwicklung einer spezies-spezifischen und einer spezies-unspezifischen GC-ICP-Q-MSIVA von Schwefelspezies in Petroprodukten. Es wurden hierzu Indikatoren, ausgehend von elementarem 34S-angereichertem Schwefel, im Mikromaßstab synthetisiert. Für die spezies-spezifische GC-ICP-Q-MSIVA wurde die erstmalige Synthese von 34S-markiertem Thiophen, Dibenzothiophen und 4-Methyldibenzothiophen verwirklicht. Als Indikatorsynthese für die spezies-unspezifische GC-ICP-Q-MSIVA erfolgte die erstmalige Darstellung von 34S-angereichertem Dimethyldisulid. Mit Hilfe der synthetisierten Verbindungen wurden spezies-spezifische und spezies-unspezifische massenspektrometrische Isotopenverdünnungsanalysen von Schwefelspezies in Petroprodukten durchgeführt. Vor allen GC-ICP-Q-MSIVA-Analysen erfolgte eine umfangreiche Speziesidentifizierung durch Aufstockexperimente mit kommerziell erhältlichen Standards und mit einem mit der GC gekoppelten Elektronenstoß (EI)-MS. Beide ICP-Q-MS Methoden zeichnen sich durch sehr niedrige Nachweisgrenzen (7 ng S/g) aus, welche auch eine Anwendbarkeit auf tiefentschwefelte Kraftstoffe garantieren. Mit der spezies-unspezifischen GC-ICP-Q-MSIVA ist neben einer Speziesanalyse auch eine Gesamtschwefelanalyse durch Aufsummierung aller in der Probe vorhandenen Spezies möglich. Es wurde im Rahmen dieser Arbeit auch der Einfluss möglicher Empfindlichkeitsänderungen des ICP-Q-MS durch koeluierende Kohlenwasserstoffe überprüft, wobei diese erwartungsgemäß auf das Ergebnis der spezies-spezifischen und spezies-unspezifischen GC-ICP-Q-MSIVA keinerlei Einfluss haben. Der zweite Hauptschwerpunkt der Arbeit lag auf der Ausarbeitung routinefähiger, schneller und zuverlässiger Methoden zur Gesamtelementspurenanalytik von Schwefel und Schwermetallen in Erdölen und Petroprodukten. Für die Gesamtschwefelanalyse wurde eine MSIVA nach thermaler Verdampfung mit 34S-markierten Dibenzothiophen als Indikator entwickelt. Die neu entwickelte Methode erlaubt eine sehr schnelle Bestimmung des Gesamtschwefelgehalts, wobei die eigentliche Messung des Isotopenverhältnisses innerhalb von Sekunden nach der Injektion der Probe erfolgt. Weiterhin zeichnet sich die Methode durch Robustheit und eine niedrige Nachweisgrenze (40 ng S/g) aus. Für die Analyse von Schwermetallen wurden erstmals Möglichkeiten einer direkten MSIVA von Erdölproben ohne zeitraubenden, kontaminationsträchtigen Aufschluss bzw. die schwierige Erzeugung einer Mikroemulsion zwischen hydrophober Probe und wässrigem Indikator entwickelt. Um eine homogene Verteilung des Indikators in der hydrophoben Probe zu ermöglichen, musste ausgehend von den zur Verfügung stehenden wässrigen Indikatorlösungen, eine Überführung des Indikators in ein organisches Lösungsmittel erfolgen. Hierzu wurde der jeweilige Metallindikator unter Komplexierung aus wässrigen Metallindikatorlösungen extrahiert. Für die Analyse der mit diesen Indikatorlösungen in organischer Phase versetzten Proben wurden zwei alternative Methoden ausgearbeitet. Bei der mit der Laserablation (LA) kombinierten ICP-SF-MSIVA wird die isotopenverdünnte Probe aus einer eigens für diesen Zweck entwickelten Probenhalterung ablatiert und so dem ICP-SF-MS zugeführt wird. Bei zeitlich sich verändernden Intensitäten der gemessenen Isotope werden aber reproduzierbare und konstante Isotopenverhältnisse erhalten. Im Falle einer homogenen Verteilung der Metallspuren wurde eine hervorragende Übereinstimmung mit Vergleichsmethoden und einem Referenzmaterial festgestellt. Im Falle einer heterogenen partikulären Verteilung der Metallspuren, wie sie z.B. bei Eisenspuren in den Erdölen vorlag, ist die Anwendbarkeit der LA-ICP-SF-MSIVA aufgrund des kleinen Probenvolumens (20 µL) jedoch begrenzt. Als Alternative zur LA-ICP-SF-MSIVA wurde ein System unter Verwendung der Fließinjektion für die Zuführung der isotopenverdünnten Probe zum ICP-SF-MS ausgearbeitet. Die isotopenverdünnte Probe wird hierbei in einen Eluentenstrom von Toluol injiziert und mit Hilfe einer Total-Consumption-Zerstäuber/Sprühkammer-Einheit vollständig bei einer Flussrate von 10 µL/min in das Plasma eingebracht. Neben einer nochmaligen Verkürzung der Analysenzeit und Vereinfachung der Probenvorbereitung bietet diese Methode zusätzlich stark verbesserte Nachweisgrenzen (z.B. Ni 0,9 ng/g). Leider sind mit diesem Verfahren bis jetzt nur Ni und Mo zuverlässig bestimmbar. Das in dieser Arbeit ausgearbeitete Methodenpaket erlaubt erstmals eine breite Einführung der ICP-MSIVA als zuverlässige Methode in die Routineanalytik der Petroindustrie. Durch die bewiesene Zuverlässigkeit, den geringen Zeitaufwand und die Robustheit der Methoden steht ihrem routinemäßigen Einsatz, außer einer weitergehenderen Automatisierung einzelner Verfahrensteile, prinzipiell nichts entgegen.

SURFACTANT-OIL INTERACTIONS: FOAMING & TOXICITY

Surfactants find large applications in detergents, paints, coatings, food and pharmaceutical industries. Other than that, much focused work has been carried out in oil recovery in petroleum industries and raw material extraction in mining industries. This is because of their unique structure and ability to simultaneously adhere to materials which are both structurally and physically different. The current thesis focuses on interactions of oil with different commercially available and laboratory synthesized surfactants in terms of characteristics such as foaming, ultrasound exposure and toxicity. Foaming is one important characteristic of surfactants that is widely utilized for oil recovery purposes. Researchers utilize surfactants' special ability to provide foam stability to for more efficient oil herding capability. The foam stability and foam volumes are calculated using static foam height tests. Further dispersion or oil in water emulsion formation is observed using ultrasound sources. As described earlier surfactants are not only used as foams for oil displacement, but they are also used for dispersion purposes where they are key components of dispersant formulations. During such operations, especially in sea conditions where adverse effects on aquatic life are a concern, toxicity of chemicals used becomes an important factor. Our toxicity testing experiments involves different surfactants, solvents and crude oil combinations through exposure to special light luminescent bacteria. The decrease in light intensity of the exposed bacteria is related to toxic effects of the samples.

RUNOFF FROM COAL PILES: EFFECTS ON THE ENVIRONMENT AND THE PUBLIC'S HEALTH

The use of coal for fuel in place of oil and natural gas has been increasing in the United States. Typically, users store their reserves of coal outdoors in large piles and rainfall on the coal creates runoffs which may contain materials hazardous to the environment and the public's health. To study this hazard, rainfall on model coal piles was simulated, using deionized water and four coals of varying sulfur content. The simulated surface runoffs were collected during 9 rainfall simulations spaced 15 days apart. The runoffs were analyzed for 13 standard water quality parameters, extracted with organic solvents and then analyzed with capillary column GC/MS, and the extracts were tested for mutagenicity with the Ames Salmonella microsomal assay and for clastogenicity with Chinese hamster ovary cells.^ The runoffs from the high-sulfur coals and the lignite exhibited extremes of pH (acidity), specific conductance, chemical oxygen demand, and total suspended solids; the low-sulfur coal runoffs did not exhibit these extremes. Without treatment, effluents from these high-sulfur coals and lignite would not comply with federal water quality guidelines.^ Most extracts of the simulated surface runoffs contained at least 10 organic compounds including polycyclic aromatic hydrocarbons, their methyl and ethyl homologs, olefins, paraffins, and some terpenes. The concentrations of these compounds were generally less than 50 (mu)g/l in most extracts.^ Some of the extracts were weakly mutagenic and affected both a DNA-repair proficient and deficient Salmonella strain. The addition of S9 decreased the effect significantly. Extracts of runoffs from the low-sulfur coal were not mutagenic.^ All extracts were clastogenic. Extracts of runoffs from the high-sulfur coals were both clastogenic and cytotoxic; those from the low-sulfur coal and the lignite were less clastogenic and not cytotoxic. Clastogenicity occurred with and without S9 activation. Chromosomal lesions included gaps, breaks and exchanges. These data suggest a relationship between the sulfur content of a coal, its mutagenicity and also its clastogenicity.^ The runoffs from actual coal piles should be investigated for possible genotoxic effects in view of the data presented in this study.^

An assessment of the relative influence of a vapor recovery system in reducing occupational exposure to volatile organic compounds in high performance liquid chromatography

Occupational exposures to organic solvents, specifically acetonitrile and methanol, have the potential to cause serious long-term health effects. In the laboratory, these solvents are used extensively in protocols involving the use of high performance liquid chromatography (HPLC). Operators of HPLC equipment may be potentially exposed to these organic solvents when local exhaust ventilation is not employed properly or is not available, which can be the case in many settings. The objective of this research was to characterize the various sites of vapor release in the HPLC process and then to determine the relative influence of a novel vapor recovery system on the overall exposure to laboratory personnel. The effectiveness of steps to reduce environmental solvent vapor concentrations was assessed by measuring exposure levels of acetonitrile and methanol before and after installation of the vapor recovery system. With respect to acetonitrile, the concentration was not statistically significant with p=0.938; moreover, exposure after the intervention was actually higher than prior to intervention. With respect to methanol, the concentration was not statistically significant with p=0.278. This indicates that the exposure to methanol after the intervention was not statistically significantly higher or lower than prior to intervention. Thus, installation of the vapor recovery device did not result in statistically significant reduction in exposures in the settings encountered, and acetonitrile actually increased significantly.^

Organic carbon chemistry of late Tertiary to Quaternary sediments ODP Leg 107

We analyzed samples from ODP Holes 652A and 654A (Leg 107, Tyrrhenian Sea) for the amount, type, and thermal maturity of organic matter. The sediments encompass clastic and biogenic lithologies, which were deposited on the passive margin east of Sardinia since the late Miocene to the Pleistocene. Marine, hypersaline/evaporitic, lacustrine/riverine, and finally hemipelagic marine conditions with occasional anoxic(?) interludes gave rise to very diverse sedimentary facies. The majority of samples is lean in organic matter (<0.2% TOC). Notable exceptions are Tortonian sediments (TOC average 0.3%), Messinian oil shales from Core 107-652A-64R (up to 11% TOC), Messinian lacustrine/fluvial sediments from Hole 652A (TOC average 0.42%,), and Pleistocene sapropel samples (>2% TOC). The Messinian oil shale in Hole 652A appears to be the only mature hydrocarbon source rock. In general, Pliocene sediments are the leanest and least mature samples. Pleistocene and Pliocene samples derive organic matter from a marine source. In spite of obvious facies differences in the Messinian between the two sites, pyrolysis results are not conclusive in separating hypersaline facies of Site 654 from the fresh water facies of Site 652, because both appear to have received terrestrial organic tissue as the main component of TOC. It is apparent from the distribution of maximum pyrolysis temperatures that heat flow must have been considerably higher at Site 652 on the lower margin in the Messinian. Molecular maturity indices in lipid extracts substantiate the finding that the organic matter in Tortonian and Messinian samples from Hole 654A is immature, while thermal maturation is more advanced in coeval samples from Hole 652A. Analyses of lipid biomarkers showed that original odd-even predominance was preserved in alkanes and alkylcyclohexanes from Messinian samples in Hole 654A, while thermal maturation had removed any odd-even predominance in Hole 652A. Isomerization data of hopanes and steranes support these differences in thermal history for the two sites. Hopanoid distribution further suggests that petroleum impregnation from a deeper, more mature source resulted in the co-occurrence of immature and mature groups of pentacyclic biomarkers. Even though the presence of 4-methylsteranes may imply that dinoflagellates were a major source for organic matter in the oil shale interval of Hole 652, we did not find intact dinoflagellates or related nonskeletal algae during microscopic investigation of the organic matter in the fine laminations. Morphologically, the laminations resemble bacterial mats.

Microbial community, biomarker concentrations and their isotopic signature in sediment of Gullfaks and Tommeliten methane seeps in the Northern North Sea

Gullfaks is one of the four major Norwegian oil and gas fields, located in the northeastern edge of the North Sea Plateau. Tommeliten lies in the greater Ekofisk area in the central North Sea. During the cruises HE 208 and AL 267 several seep locations of the North Sea were visited. At the Heincke seep at Gullfaks, sediments were sampled in May 2004 (HE 208) using a video-guided multiple corer system (MUC; Octopus, Kiel). The samples were recovered from an area densely covered with bacterial mats where gas ebullition was observed. The coarse sands limited MUC penetration depth to maximal 30 centimeters and the highly permeable sands did not allow for a high-resolution, vertical subsampling because of pore water loss. The gas flare mapping and videographic observation at Tommeliten indicated an area of gas emission with a few small patches of bacterial mats with diameters <50 cm from most of which a single stream of gas bubbles emerged. The patches were spaced apart by 10-100 m. Sampling of sediments covered by bacterial mats was only possible with 3 small push cores (3.8 cm diameter) mounted to ROV Cherokee. These cores were sampled in 3 cm intervals. Lipid biomarker extraction from 10 -17 g wet sediment was carried out as described in detail elsewhere (Elvert et al., 2003; doi:10.1080/01490450303894). Briefly, defined concentrations of cholestane, nonadecanol and nonadecanolic acid with known delta 13C-values were added to the sediments prior to extraction as internal standards for the hydrocarbon, alcohol and fatty acid fraction, respectively. Total lipid extracts were obtained from the sediment by ultrasonification with organic solvents of decreasing polarity. Esterified fatty acids (FAs) were cleaved from the glycerol head group by saponification with methanolic KOH solution. From this mixture, the neutral fraction was extracted with hexane. After subsequent acidification, FAs were extracted with hexane. For analysis, FAs were methylated using BF3 in methanol yielding fatty acid methyl esters (FAMES). The fixation for total cell counts and CARD-FISH were performed on-board directly after sampling. For both methods, sediments were fixed in formaldehyde solution. After two hours, aliquots for CARD-FISH staining were washed with 1* PBS (10mmol/l sodium phosphate solution, 130mmol/l NaCl, adjusted to a pH of 7.2) and finally stored in a 1:1 PBS:ethanol solution at -20°C until further processing. Samples for total cell counts were stored in formalin at 4°C until analysis. For sandy samples, the total cell count/CARD-FISH protocol was optimized to separate sand particles from the cells. Cells were dislodged from sediment grains and brought into solution with the supernatant by sonicating each sample onice for 2 minutes at 50W. This procedure was repeated four times and supernatants were combined. The sediment samples were brought to a final dilution of 1:2000 to 1:4000 and filtered onto 0.2µm GTTP filters (Millipore, Eschbonn, Germany).

Influence of soy oil source and supplementation of the diet with vitamin E and vi tamin C on performance and egg quality of Single Comb White Leghourn lyaing hens from forty four to fity six weeks of age

Two experiments (Exp.) were conducted to determine the AME content of refined soybean oil (SO), recycled soybean oil (RSO), and acidulated soybean oil soapstocks (ASO) and the effects of inclusion of vitamin E and vitamin C in diets containing 3.5% of these soy oils on performance and egg quality of Hy-line hens from 44 to 56 wks of age.

Utilización de ingredientes tradicionales y nuevos productos derivados del haba de soja en piensos de lechones blancos e ibéricos: efectos sobre la fisiología digestiva y la productividad

Los objetivos principales de esta Tesis Doctoral fueron estudiar en 4 ensayos los efectos a) del procesado del maíz y la inclusión en los piensos de ingredientes de alta calidad como harina de pescado o fuentes de lactosa en lechones blancos b) inclusión en el pienso de diferentes productos derivados del haba de soja, con diferente contenido de proteína bruta (PB), tamaño de partícula y origen en lechones blancos e ibéricos y c) inclusión en el pienso de lechones ibéricos de ingredientes de alta calidad; forma de presentación del pienso y la duración del suministro del pienso prestárter sobre los parámetros productivos, la digestibilidad de los nutrientes, y las características morfológicas de la mucosa digestiva en lechones blancos e ibéricos recién destetados. En el experimento 1, los efectos de la complejidad del pienso prestárter sobre los parámetros productivos y la digestibilidad total aparente (TTAD) de los nutrientes fueron estudiados en lechones blancos recién destetados. Se utilizaron 10 tratamientos experimentales como resultado de 5 piensos prestárter (21 a 41 d de edad) y 2 piensos estárter (42 a 62 d de edad). Los piensos prestárter consistieron en un control negativo que incluía 40% de maíz crudo, 4% de harina de pescado y 7% de lactosa, un control positivo que incluía 40% de maíz cocido, 10% de harina de pescado, y 14% de lactosa, y 3 piensos adicionales con similares ingredientes que el pienso control positivo pero en los que a) 40% de maíz cocido fue sustituido por el mismo porcentaje de maíz crudo, b) se redujo el nivel de harina de pescado del 10 al 4%, y c) se redujo el nivel de lactosa del 14 al 7%. Cada tratamiento se replicó 6 veces (6 lechones/departamento). De 42 a 62 d de edad, la mitad de cada uno de los 5 piensos prestárter recibió un pienso estándar compuesto por harina de soja- maíz crudo y manteca y la otra mitad un pienso con similar perfil nutricional pero incluyendo un 20% de maíz cocido, 5% de harina de pescado, 1.3% de lactosa, 2% de concentrado de proteína de soja obtenido por fermentación y 1% de aceite de soja en lugar de harina de soja, maíz sin procesar y manteca. La complejidad del pienso no afectó a los parámetros productivos en ninguno de los periodos estudiados, pero el índice de diarreas durante la fase prestárter fue mayor en los lechones que recibieron el pienso control negativo que en los alimentados con cualquiera de los otros piensos (P<0.05). A los 30 días de edad (piensos prestárter), la digestibilidad de la materia orgánica (MO) y de la energía bruta (EB) fue menor (P<0.001) en los lechones que consumieron el pienso control negativo que en los lechones que consumieron cualquiera de los otros piensos. Sin embrago, la digestibilidad fecal de la PB no fue afectada. A los 50 días de edad (piensos estárter), la digestibilidad de los nutrientes fue similar en ambos piesnsos. Se concluye que la utilización de niveles elevados de ingredientes de alta calidad en los piensos no mejora los parámetros productivos de los lechones blancos en ninguno de los períodos estudiados. De 21 a 41 días de edad, el índice de diarreas se redujo y la digestibilidad de los nutrientes aumentó con la utilización de piensos de mayor calidad. Por lo tanto, la utilización de piensos con niveles elevados de ingredientes de calidad para reducir problemas digestivos y por lo tanto, mejorar los parámetros productivos podría estar justificada en algunos casos. En el experimento 2, se estudiaron los efectos de la inclusión en el pienso de harina de soja con diferente contenido de PB (44 vs. 49 % PB), la micronización de la harina de soja de alta proteína (AP-HS; 49% PB) y la utilización de concentrado de proteína de soja (CPS; 65% PB) sobre los parámetros productivos y la TTAD de los nutrientes en lechones blancos recién destetados de 28 a 63 días de edad. De 28 a 49 días de edad (fase I), hubo un pienso control positivo con un 10% de CPS, un pienso control negativo con 14.8% de harina de soja estándar (R-HS; 44% de PB) y otros 4 piensos que incluían 13.3% de AP-HS de origen Americano (USA) o Argentino (ARG) y molidas groseramente (980 μm) o micronizadas (80 μm). Cada tratamiento se replicó 8 veces (6 lechones/departamento). De 49 a 63 días de edad (fase II), todos los lechones recibieron un pienso comercial común en forma de harina. En el global de la fase I, el tratamiento experimental no afectó a ninguno de los parámetros productivos estudiados. Sin embargo, de 28 a 35 días de edad, los lechones alimentados con AP-HS micronizadas tuvieron un mejor índice de conversión (IC; 1.11 vs. 0.98; P<0.05) que los alimentados con AP-HS molidas groseramente. También, de 35 a 42 días de edad, los lechones que recibieron el pienso con AP-HS micronizada tendieron (P=0.08) a consumir más pienso que los lechones que consumieron el pienso con AP-HS molida. Durante la fase II (49 a 63 días de edad), cuando todos los lechones recibieron un pienso común, no se observaron diferencias en productividad de los lechones debido al tratamiento previo. En general, la digestibilidad de los nutrientes a los 35 días de edad fue mayor para los lechones que consumieron CPS que para los lechones que consumieron R-HS con los lechones que consumieron AP-HS en una posición intermedia. La digestibilidad de la PB fue mayor (P≤0.01) para el pienso que contenía CPS que para el promedio de los 5 tratamientos en base a HS. También, la digestibilidad de la MO y de la materia seca (MS) fue mayor para el pienso que contenía AP-HS micronizada o molida groseramente que para el pienso que contenía R-HS. La micronización de la AP-HS no tuvo efecto alguno sobre la digestibilidad de los nutrientes. Se concluye que cuando el CPS sustituye en el pienso a R-HS, la digestibilidad de la PB aumenta pero no tiene efecto alguno sobre los parámetros productivos. La utilización de AP-HS en sustitución de R-HS en el pienso mejora la digestibilidad de los nutrientes pero no afecta a los parámetros productivos. La utilización de harina de soja micronizada en los piensos mejora la eficiencia alimenticia durante la primera semana post-destete pero no tiene efecto alguno sobre la digestibilidad de los nutrientes. En general, la inclusión de productos derivados del haba de soja con un alto valor añadido (CPS o AP-HS) en el pienso presenta pocas ventajas en términos productivos al uso de AP-HS en lechones blancos recién destetados. En el experimento 3, se estudiaron los mismos productos de soja y piensos similares al experimento 2 en lechones ibéricos recién destetados. Además de los parámetros productivos y la TTAD de los nutrientes, en este ensayo se estudió también la digestibilidad ileal aparente (AID) de los nutrientes, así como las características histológicas y morfometría de la mucosa ileal. Cada uno de los 6 tratamientos fue replicado 6 veces (6 lechones/departamento). De 30 a 51 días de edad la fuente de harina de soja no afectó a los parámetros productivos, pero el índice de diarreas fue mayor (P<0.001) y la TTAD y AID de los nutrientes menor en los lechones alimentados con R-HS que en los alimentados con CPS o AP-HS. Sin embargo, no se encontró ninguna diferencia para éstos parámetros entre los piensos que contenían AP-HS y CPS. La TTAD de la MO (P=0.07) y de la EB (P=0.05) tendieron a ser mayores en los piensos basados en AP-HS micronizada que en los basados en AP-HS molida. La TTAD de la EB tendió (P<0.05) a ser mayor para la AP-HS de origen USA que para la AP-HS de origen ARG. Los lechones que consumieron R-HS presentaron villi de menor longitud (P<0.01) que los lechones que consumieron AP-HS o CPS, pero no se observaron diferencias en el caso de los lechones que recibieron los piensos que contenían AP-HS o CPS. Se concluye que la inclusión de AP-HS o CPS en el pienso en sustitución de R-HS reduce el índice de diarreas y mejora la digestibilidad de los nutrientes y las características morfológicas del íleon sin afectar a los parámetros productivos. La utilización de piensos basados en productos derivados del haba de soja con mayor valor añadido (CPS o AP-HS) en sustitución de la R-HS, mejora la TTAD de todos los nutrientes y reduce el índice de diarreas si llegar afectar a los parámetros productivos. En el experimento 4 se estudiaron los efectos del contenido de PB y la complejidad del pienso, la presentación física y la duración del suministro del pienso prestárter sobre los parámetros productivos y la TTAD de los nutrientes en lechones ibéricos recién destetados de 28 a 63 días de edad. Hubo 12 tratamientos experimentales con 2 tipos de pienso (AC; calidad alta y BC: calidad media), 2 presentaciones del pienso (gránulo y harina) y 3 duraciones de suministro del pienso prestárter (7, 14 y 21 días). Desde los 7, 14 y 21 días de experimento (dependiendo del tratamiento), hasta los 35 días, todos los lechones recibieron un pienso comercial en forma de harina. Cada uno de los tratamientos fue replicado 3 veces (6 lechones/departamento). En el global del experimento, la ganancia media diaria (GMD; P<0.05) y el consumo medio diario (CMD; P<0.01) fue menor en los lechones que recibieron el pienso AC que para los que recibieron el pienso de BC, si bien el IC no se vio afectado. La granulación del pienso prestárter no afectó a los crecimientos pero mejoró la eficiencia alimenticia. La utilización del pienso prestárter de 0 a 21 días de prueba mejoró el IC (P<0.05), pero redujo la GMD (P<0.01) en comparación con la utilización de éste pienso solo durante 7 o 14 días. El índice de diarreas tendió a ser mayor (P=0.06) en los lechones alimentados con los piensos AC que en los alimentados con los piensos BC. Asimismo, el índice de diarreas fue superior en los lechones que recibieron el pienso en gránulo que los que los recibieron en harina (P<0.001). Además, el índice de diarreas fue superior en los lechones que recibieron el pienso prestárter durante 14 o 21 días que en los que lo recibieron solo durante 7 días (P<0.01). De 28 a 49 días de edad, la GMD y el IC no se vieron afectados por la complejidad del pienso, pero la presentación en gránulo o el aumento en la duración de suministro del pienso prestárter mejoró el IC (P<0.01). También, en este periodo el índice de diarreas fue mayor en lechones alimentados con piensos granulados que aquellos alimentados con piensos en harina. Asimismo, fue superior para los lechones alimentados con el pienso prestárter durante 14 o 21 días que para los que recibieron éste pienso solo durante 7 días (P<0.01). De 49 a 63 días de edad, los lechones que previamente habían recibido piensos BC crecieron más que los que recibieron piensos AC (P<0.001). Asimismo, los lechones que recibieron el pienso prestárter durante 21 días comieron (P< 0.001) y crecieron menos (P<0.05) presentando una peor eficacia alimenticia (P<0.05) que los lechones que lo recibieron solo durante 7 14 días. La digestibilidad de la MO fue mayor en los lechones alimentados con los piensos AC que en los alimentados con piensos BC (P<0.05). La granulación del pienso mejoró la digestibilidad de los principales nutrientes. Los piensos prestárter AC mejoraron la digestibilidad de los nutrientes pero no la eficiencia alimenticia en lechones ibéricos de 28 a 63 días de edad. La granulación del pienso mejoró la eficiencia alimenticia. El aumento del suministro del pienso prestárter de 7 a 21 días mejoró la eficiencia alimenticia pero redujo la GMD. Por lo tanto, la utilización de piensos granulados de alta calidad durante el periodo prestárter es recomendable en lechones ibéricos, pero solo durante la primera semana post-destete. ABSTRACT The main objectives of this PhD Thesis were to study the effects of a) heat processing (HP) of corn and inclusion of high quality ingredients of animal origin such as fish meal (FM) and dried milk products in the diet, b) inclusion of different soy products varying in crude protein (CP) content, particle size, and origin of the beans in diets for conventional white and Iberian weanling pigs, and c) effects of ingredient quality, feed form, and duration of supply of the phase I diets on growth performance, nutrient digestibility, and intestinal morphology of weanling pigs. In experiment 1, the effect of diet complexity on total tract apparent digestibility (TTAD) and growth performance was studied in piglets from 21 to 62 d of age. There were 10 experimental treatments which resulted from the combination of 5 phase I (21 to 41 d of age) and 2 phase II (42 to 62 d of age) diets. The 5 phase I diets consisted of a negative control diet that contained 40 % raw corn, 4% FM, and 7% lactose (LAC); a positive control diet that contained 40 % HP corn, 10% FM, and 14% LAC, and 3 extra diets that used similar ingredients to those of the positive control diet but in which a) 40% of HP corn was substituted by raw corn, b) 4% FM rather than 10% FM, and c) 7% LAC instead of 14% LAC were included in the diet. Each treatment was replicated 6 times (6 pigs per pen). From 42 to 62 d of age, half of the pens of each of the 5 phase I treatments received a standard soybean meal (SBM)–native corn–lard diet wheras the other half received a diet with similar nutrient profile but that included 20% HP corn, 5% FM, 1.3% lactosa, 2% fermented soy protein concentrate, and 1% soybean oil in substitution of variables amounts of non-processed corn, SBM, and lard. Dietary treatment did not affect piglet performance at any age, but the incidence of post-weaning diarrhea (PWD) was higher during phase I in piglets fed the negative control diet than in piglets fed any of the other diets (P<0.05). At 30 d of age (phase I diets), the TTAD of organic matter (OM) and gross energy (GE) was lower (P<0.001) in pigs fed the negative control diet than in pigs fed the other diets but CP digestibility was not affected. At 50 d of age (phase II diets), dietary treatment did not affect TTAD of any dietary component. It is concluded that the use of high quality ingredients at high levels in the diet did not improve growth performance of piglets at any age. From 21 to 41 d of age, PWD was reduced and nutrient digestibility was increased in pigs fed the more complex diets. Consequently, the inclusion of high levels of high quality ingredients in piglet diets to maximize growth performance might not be justified under all circumstances In experiment 2, the effect of CP content (44 vs. 49 % CP) of SBM, micronization (fine grinding) of the high CP SBM (HP-SBM; 49% CP), and soy protein concentrate (SPC; 65% CP) on TTAD and growth performance was studied in conventional white piglets from 28 to 63 d of age. From 28 to 49 d of age (phase I), there was a positive control diet that included 6.5% CP from SPC and a negative control diet that supplied the same amount of CP as regular SBM (R-SBM; 44% CP) of Argentina (ARG) origin. The other 4 diets included the same amount of dietary CP from 2 sources of HP-SBM (USA or ARG origin), either ground (990 μm) or micronized (60 μm). Each treatment was replicated 8 times (6 pigs per pen). From 49 to 63 d of age (phase II), all pigs were fed a common commercial starter diet. For the entire phase I, type of soy product included in the diet did not affect growth performance of the pigs. However, from 28 to 35 d of age pigs fed the micronized HP-SBM had better feed conversion ratio (FCR; 0.90 vs. 1.01; P<0.05) than pigs fed the ground HP-SBM. Also, from 35 to 42 d of age, average daily feed intake (ADFI) tended to be higher (P=0.08) for pigs fed the micronized HP-SBM than for pigs fed the ground HP-SBM. During phase II, when all the pigs received the same diet, no differences among treatments were observed. In general, the TTAD of nutrients at 35 d of age was higher for the SPC than for the R-SBM diet with the HP-SBM diets being intermediate. The TTAD of CP was higher (83.8% vs. 81.9%; P≤0.01) for the SPC diet than for the average of 5 SBM containing diets. Also, the digestibility of OM and dry matter (DM) was higher (P<0.01) for the HP-SBM, either ground or micronized, than for the R-SBM diet. Micronization of the HP-SBM did not affect nutrient digestibility. It is concluded that when R-SBM was substituted by SPC, CP digestibility was improved but no effects on growth performance were observed. The use of HP-SBM in substitution of R-SBM in the diet improved nutrient digestibility but did not affect piglet performance. The inclusion of micronized HP-SBM in the diet improved FCR during the first week post-weaning but did not affect TTAD of nutrients. Therefore, the inclusion of added value soy products (SPC or micronized SBM) in the diet presents little advantage in terms of growth performance over the use of HP-SBM in pigs weaned at 28 d of age. In experiment 3, the effects of the same sources of soy protein used in experiment 2 on TTAD and growth performance of crossbreed Iberian pigs from 30 to 61 d of age were studied. In addition, the apparent ileal digestibility (AID) of nutrients and mucosa ileum morphology were also determined. Dietary treatment did not affect growth performance of the pigs at any age but from 30 to 51 d of age (phase I diets), PWD was higher (P<0.001) and the TTAD and AID of all nutrients were lower for pigs fed the R-SBM diet than for pigs fed the HP-SBM or the SPC diets. However, no differences between the HP-SBM and the SPC containing diets were detected for digestibility of any dietary component. The TTAD of OM (P=0.07) and GE (P=0.05) tended to be higher for the micronized HP-SBM than for the ground HP-SBM and that of GE was higher (P<0.05) for the USA meal than for the ARG meal. Pigs fed R-SBM had lower villus height (P<0.01) than pigs fed HP-SBM or SPC but no differences in ileal mucosal morphology were detected between SPC and HP-SBM containing diets. It is concluded that feeding the HP-SBM or SPC in substitution of R-SBM reduced PWD and improved nutrient digestibility and ileal morphology in piglets as compared with feeding the R-SBM, but had no effect on growth performance. The inclusion in the diet of added value soy products (micronized SBM or SPC) in substitution of the R-SBM increased the TTAD of all nutrients and reduced PWD but had no advantage in terms of growth performance over the use of ground HP-SBM. In experiment 4, the effect of CP content and ingredient complexity, feed form, and duration of feeding of the phase I diets on growth performance and TTAD of nutrients were studied in Iberian pigs from 28 to 63 d of age. There were 12 dietary treatments with 2 type of feeds (HQ; higher quality and LQ; medium quality), 2 feed forms (pellets vs. mash), and 3 durations of supply (7, 14, and 21 d) of the phase I diets. From d 7, 14, or 21 (depending on treatment) to d 35 of experiment, all pigs received a common diet in mash form. Each treatment was replicated 3 times (6 pigs/pen). For the entire experiment, average daily gain (ADG; P<0.05) and ADFI (P<0.01) were lower with the HQ than with the LQ phase I diets but FCR was not affected. Pelleting of the phase I diets did not affect ADG but improved FCR (P<0.01). Feeding the phase I diets from d 0 to 21 improved FCR (P<0.05) but decreased ADG (P<0.01) as compared with 7 or 14 d of feeding. Post-weaning diarrhea tended to be higher (P=0.06) for pigs fed the HQ diets than for pigs fed the LQ diets and for pigs fed pellets than for pigs fed mash (P<0.001). Also, PWD was higher for pigs fed the phase I diet for 14 or 21 d than for pigs fed this diet for 7 d (P<0.01). From d 0 to 21, ADG and FCR were not affected by feed quality but feeding pellets or increasing the duration of feeding the phase I diets improved FCR (P<0.01). Also, in this period PWD was higher with pellets than with mash and for pigs fed the phase I diets for 14 or 21 d than for pigs fed this diet for only 7 d (P<0.01). From d 21 to 35, pigs previously fed the LQ diet had higher ADG than pigs fed the HQ phase I diets (P<0.001). Also, pigs that were fed the phase I diets for 21 d had lower ADG (P<0.05) and ADFI (P< 0.001) and poor FCR (P<0.05) than pigs fed these diets for 7 or 14 d. Organic matter digestibility was higher for pigs fed the HQ phase I diets than for pigs fed the LQ phase I diets (P<0.05). Pelleting improved TTAD of all nutrients (P<0.01). It is concluded that HQ phase I diets increased TTAD of nutrients but not feed efficiency of Iberian pigs from d 28 to 63 d of age. Also, pelleting improved nutrient digestibility and feed efficiency. Increasing the duration of supply of the phase I diets from 7 to 21 d improved feed efficiency but reduced ADG. Therefore, the use of LQ phase I diets in pellet form for no more than 7 d after weaning is recommended in Iberian pigs.

Cloning of an organic solvent-resistance gene in Escherichia coli: the unexpected role of alkylhydroperoxide reductase.

Although bacterial strain able to grow in the presence of organic solvents have been isolated, little is known about the mechanism of their resistance. In the present study, 1,2,3,4-tetrahydronaphthalene (tetralin), a solvent with potential applications in industrial biocatalysis, was used to select a resistant mutant of Escherichia coli. The resultant mutant strain was tested for resistance to a wide range of solvents of varying hydrophobicities and was found to be resistant not only to tetralin itself but also to cyclohexane, propylbenzene, and 1,2-dihydronaphthalene. A recombinant library from mutant DNA was used to clone the resistance gene. The sequence of the cloned locus was determined and found to match the sequence of the previously described alkylhydroperoxide reductase operon ahpCF. The mutation was localized to a substitution of valine for glycine at position 142 in the coding region of ahpC, which is the gene encoding the catalytic subunit of the enzyme. The ahpC mutant was found to have an activity that was three times that of the wild type in reducing tetralin hydroperoxide to 1,2,3,4-tetrahydro-1-naphthol. We conclude that the toxicity of such solvents as tetralin is caused by the formation of toxic hydroperoxides in the cell. The ahpC mutation increases the activity of the enzyme toward hydrophobic hydroperoxides, thereby conferring resistance. The ahpC mutant was sensitive to the more hydrophilic solvents xylene and toluene, suggesting that there are additional mechanisms of solvent toxicity. Mutants resistant to a mixture of xylene and tetralin were isolated from the ahpC mutant but not from the wild-type strain.

Guide to cleaner technologies : organic coating removal.

"February 1994."

A rea Sur de Chicago : un iniciativo de alcanze para pruebas de pozos privados : Incluye las a freas de Chicago Heights, South Chicago Heights y Steger.

Areas of concern: This notification is based on information Illinois EPA has found while investigating, monitoring and working on two landfill sites in the Chicago Heights/South Chicago Heights area. Tests from groundwater and surface water at one landfill site showed levels of vinyl chloride greater than state Class I groundwater standards - the state standards that are designed to protect groundwater for use as drinking water. Vinyl chloride is from a family of chemicals known as volatile organic compounds (VOCs), which are common man-made chemicals found in cleaning solvents, gasoline and oil. These chemicals can travel in groundwater long distances from where they were spilled or dumped.

Organic reactions in ionic liquids:Gewald synthesis of 2-aminothiophenes catalyzed by ethylenediammonium diacetate

Ionic liquids based on 1-butyl-3-methylimidazolium tetrafluoroborate (BmimBF4) and 1-butyl-3-methylimidazolium hexafluorophosphate (BmimPF6) were used as reusable alternatives to volatile organic solvents (VOCs) for ethylenediammonium diacetate (EDDA) catalyzed Gewald synthesis of 2-aminothiophenes. Significant rate enhancement and improvement of the yield were observed. The ionic liquids containing catalyst EDDA were recycled several times with no decreases in yields and reaction rates.

Organic reactions in ionic liquids: Knoevenagel condensation catalyzed by ethylenediammonium diacetate

The moisture and air stable ionic liquids 1-butyl-3-methylimidazonium tetrafluoroborate [bmim]BF4 and 1-butyl-3-methylimidazonium hexafluorophosphate [bmim]PF6 were used as ‘green' recyclable alternatives to volatile organic solvents (VOCs) for ethylenediammonium diacetate (EDDA) catalyzed Knoevenagel condensation between aldehydes or ketones with active methylene compounds. Both aldehydes and ketones gave satisfactory results. The ionic liquids containing catalyst EDDA were recycled several times with no decreases in yields and reaction rates. In the case of 2-hydroxybenzaldehyde, the reactions led to the formation of 3-substituted coumarins under standard reaction conditions.

Increase of energy recovery from sewage sludge

The use of the pyrolysis process to obtain valuable products from biomass is amongst the technologies being investigated as a source for renewable energy. The pyrolysis process yields products such as biochar, bio-oil and non condensable gases. The main objective of this project is to increase energy recovery from sewage sludge by utilising the intermediate pyrolysis process. The intermediate pyrolysis has a residence time ranging from 5 to 10 minutes. The main product yields from sewage sludge pyrolysis are 50 wt% biochar, 40 wt% bio-oil and 10 wt% non condensable gases. The project was carried out on a pilot plant scale reactor with a load capacity of 20 kg/h. This enabled a high yield of biochar and bio-oil. The characterisation of the products indicated that the organic phase of the bio-oil had good fuel properties such as having high energy content of 39 MJ/kg, low acid number of 21.5, high flash point of 150 and viscosity of 35 cSt. An increase in pyrolysis experiments enabled large quantities of pyrolysis oil production. Co-pyrolysis of sewage sludge was carried out on laboratory scale with mixed wood, rapeseed and straw. It found that there was an increase in bio-oil quantity with rapeseed while co-pyrolysis with wood helped to mask the smell of the sludge pyrolysis oil. Engine test were successfully carried out in an old Lister engine with pyrolysis oil fractions of 30% and 50% blended with biodiesel. This indicates that these pyrolysis oil fractions can be used in similar engine types without any problems however long term effects in ordinary engines are unknown. An economic evaluation was carried out about the implementation of the intermediate pyrolysis process for electricity production in a CHP using the pyrolysis oil. The prices of electricity per kWh were found to be very high.