Surface transformation hardening of carbon steel with high power fiber laser

This study investigated the surface hardening of steels via experimental tests using a multi-kilowatt fiber laser as the laser source. The influence of laser power and laser power density on the hardening effect was investigated. The microhardness analysis of various laser hardened steels was done. A thermodynamic model was developed to evaluate the thermal process of the surface treatment of a wide thin steel plate with a Gaussian laser beam. The effect of laser linear oscillation hardening (LLOS) of steel was examined. An as-rolled ferritic-pearlitic steel and a tempered martensitic steel with 0.37 wt% C content were hardened under various laser power levels and laser power densities. The optimum power density that produced the maximum hardness was found to be dependent on the laser power. The effect of laser power density on the produced hardness was revealed. The surface hardness, hardened depth and required laser power density were compared between the samples. Fiber laser was briefly compared with high power diode laser in hardening medium-carbon steel. Microhardness (HV0.01) test was done on seven different laser hardened steels, including rolled steel, quenched and tempered steel, soft annealed alloyed steel and conventionally through-hardened steel consisting of different carbon and alloy contents. The surface hardness and hardened depth were compared among the samples. The effect of grain size on surface hardness of ferritic-pearlitic steel and pearlitic-cementite steel was evaluated. In-grain indentation was done to measure the hardness of pearlitic and cementite structures. The macrohardness of the base material was found to be related to the microhardness of the softer phase structure. The measured microhardness values were compared with the conventional macrohardness (HV5) results. A thermodynamic model was developed to calculate the temperature cycle, Ac1 and Ac3 boundaries, homogenization time and cooling rate. The equations were numerically solved with an error of less than 10-8. The temperature distributions for various thicknesses were compared under different laser traverse speed. The lag of the was verified by experiments done on six different steels. The calculated thermal cycle and hardened depth were compared with measured data. Correction coefficients were applied to the model for AISI 4340 steel. AISI 4340 steel was hardened by laser linear oscillation hardening (LLOS). Equations were derived to calculate the overlapped width of adjacent tracks and the number of overlapped scans in the center of the scanned track. The effect of oscillation frequency on the hardened depth was investigated by microscopic evaluation and hardness measurement. The homogeneity of hardness and hardened depth with different processing parameters were investigated. The hardness profiles were compared with the results obtained with conventional single-track hardening. LLOS was proved to be well suitable for surface hardening in a relatively large rectangular area with considerable depth of hardening. Compared with conventional single-track scanning, LLOS produced notably smaller hardened depths while at 40 and 100 Hz LLOS resulted in higher hardness within a depth of about 0.6 mm.

Statistical analysis of survey-based event history data with application to modeling of unemployment duration

Longitudinal surveys are increasingly used to collect event history data on person-specific processes such as transitions between labour market states. Surveybased event history data pose a number of challenges for statistical analysis. These challenges include survey errors due to sampling, non-response, attrition and measurement. This study deals with non-response, attrition and measurement errors in event history data and the bias caused by them in event history analysis. The study also discusses some choices faced by a researcher using longitudinal survey data for event history analysis and demonstrates their effects. These choices include, whether a design-based or a model-based approach is taken, which subset of data to use and, if a design-based approach is taken, which weights to use. The study takes advantage of the possibility to use combined longitudinal survey register data. The Finnish subset of European Community Household Panel (FI ECHP) survey for waves 1–5 were linked at person-level with longitudinal register data. Unemployment spells were used as study variables of interest. Lastly, a simulation study was conducted in order to assess the statistical properties of the Inverse Probability of Censoring Weighting (IPCW) method in a survey data context. The study shows how combined longitudinal survey register data can be used to analyse and compare the non-response and attrition processes, test the missingness mechanism type and estimate the size of bias due to non-response and attrition. In our empirical analysis, initial non-response turned out to be a more important source of bias than attrition. Reported unemployment spells were subject to seam effects, omissions, and, to a lesser extent, overreporting. The use of proxy interviews tended to cause spell omissions. An often-ignored phenomenon classification error in reported spell outcomes, was also found in the data. Neither the Missing At Random (MAR) assumption about non-response and attrition mechanisms, nor the classical assumptions about measurement errors, turned out to be valid. Both measurement errors in spell durations and spell outcomes were found to cause bias in estimates from event history models. Low measurement accuracy affected the estimates of baseline hazard most. The design-based estimates based on data from respondents to all waves of interest and weighted by the last wave weights displayed the largest bias. Using all the available data, including the spells by attriters until the time of attrition, helped to reduce attrition bias. Lastly, the simulation study showed that the IPCW correction to design weights reduces bias due to dependent censoring in design-based Kaplan-Meier and Cox proportional hazard model estimators. The study discusses implications of the results for survey organisations collecting event history data, researchers using surveys for event history analysis, and researchers who develop methods to correct for non-sampling biases in event history data.

The effects of pigweed redroot (Amaranthus retoflexus) weed competition and its economic thresholds in corn (Zea mays)

The aim of this study was to determine the economic damage threshold of Pigweed redroot for corn regarding its density. An experiment was conducted at the Agriculture Research station of Islamic Azad University branch of Gonabad during 2006. The experiment was carried out as a factorial in a randomized complete block design with three replications. In the experiments, the factors included corn (var. 704) densities of 7.5, 8.5 and 9.5 plants m-2 and pigweed redroot densities of 0, 2, 4, 6 and 8 plants m-2. The increase in Pigweed redroot density, decrease in crop grain and biomass yield components such as ear length, ear diameter, number of grains per row, row number, grain number in ear, grain yield and biological yield of corn, decreased. Also, with an increase in corn density, the number of grain per rows, row number, grain yield and biological yield of corn increased. The economic thresholds density of Pigweed redroot was 0.09 to 0.13 plants m-2 in corn different densities, and increased with corn density increases.

Competitive ability of soybean cultivars with horseweed (Conyza bonariensis)

The existence of large areas infested with populations of Conyza spp. resistant to glyphosate in Brazil demands appropriate and integrated management strategies. This experiment aimed to identify soybean cultivars with greater competitive ability with horseweed plants and to determine plant characteristics associated with this ability. The experiment was arranged in a randomized complete block design with split plots. Seven soybean cultivars (CD 225 RR, BRS 232, CD 226 RR, NK 7054 RR, BMX Apollo RR, BRS 245 RR and BRS 255 RR) were allocated in the plots, and two interference situations (absence and 13.3 plants of Conyza m-2, transplanted seven days before soybean planting) in the subplots. The average yield loss due to competition with horseweed was 25%. Cultivar CD 226 RR showed no significant grain yield loss due to competition, compared to the control without infestation, but showed the lowest average grain yield. The BRS 232 genotype showed loss of grain yield of only 14%, and presented positive plant height and leaf mass at 20 DAE, as well as dry matter of stems+branches in all evaluations, features related to its higher performance and greater ability to withstand competition with horseweed plants.

Chemical control of different Digitaria insularis populations and management of a glyphosate-resistant population

This study aimed to control different populations of Digitaria insularisby glyphosate herbicide, isolated and mixed, besides the combination of methods (chemical and mechanical) to manage resistant adult plants. Three experiments were conducted, one in pots which were maintained under non-controlled conditions and two under field conditions. In the experiment in pots, twelve populations of D. insularis were sprayed with isolated glyphosate (1.44 and 2.16 kg a.e. ha-1) and mixed (1.44 and 2.16 kg a.e. ha-1) with quizalofop-p tefuryl (0.12 kg i.a. ha-1). The treatment of 1.44 kg a.e. ha-1 of glyphosate plus 0.12 kg a.i. ha-1 of quizalofop was sufficient for adequate control (>95%) of all populations. Population 11 (area of grain production in Itumbiara, GO) was considered sensitive to glyphosate. Others populations were moderately sensitive or tolerant to the herbicide. In the field, the plants of D. insularis of one of the experiments were mowed and, in the other, there were not. Eight treatments with herbicides [isolated glyphosate (1.44 and 2.16 kg a.e. ha-1) and mixed (1.44 and 2.16 kg a.e. ha-1) with quizalofop-p-tefuryl at 0.12 kg a.i. ha-1), clethodim at 0.108 kg a.i. ha-1) or nicosulfuron at 0.06 kg a.i. ha-1)] were assessed, in combination with or without sequential application of the standard treatment, sprayed 15 days after the first application. The combination of the mechanic control with the application of glyphosate (2.16 and 1.44 kg a.e. ha-1) plus quizalofop-p-tefuryl (0.12 kg a.i. ha-1) or clethodim (0.108 kg a.i. ha-1), associated to the sequential application, was the most effective strategy for the management of adult plants of resistant D. insularis.

Cell proliferation and migration in the jejunum of suckling rats submitted to progressive fasting

Cell proliferation and migration in the intestinal crypts, and cell migration in the villus are controlled by different mechanisms in adult rats. In the present study, weanling rats and fasting rats were used to quantitatively study the correlation of cell cycle parameters and epithelial cell migration in crypts and intestinal villi. Eighteen-day-old rats received a single injection of tritiated thymidine [3H]TdR (23:00 h); half of the pups were submitted to fasting 5 h earlier. Cell proliferation was determined in radioautographs of jejunal crypts, on the basis of the labeling indices (LI) taken 1, 8, 13 and 19 h after [3H]TdR. The results showed that the labeling index did not differ 1 h or 19 h after [3H]TdR between the fed (38.7% or 48%) and fasting groups (34.6% or 50.4%). The modified method of grain count halving indicated that cell cycle time did not differ between fed (16.5 h) and fasting rats (17.8 h); the growth fraction, however, had lower values in fasting (59%) than in fed rats (77%). Cell migration in the crypt, estimated by the LI obtained for each cell position, did not change with treatment. As for the villi, the cell migration rate was significantly retarded by 3 cell positions (8%). These results suggest that the cell migration in the villi of weanling pups does not depend directly on the cell proliferation and migration in the intestinal crypt, but is directly affected by the absence of food in the lumen

Environment is crucial to the cooking time of beans

The objectives of this study were to understand how genotype, storage time, and storage conditions affect cooking time of beans and to indicate storage techniques that do not affect the cooking time. The grains were subjected to five different storage periods and six different storage conditions. The cooking time was estimated using the Mattson Cooker. The data were subjected to analysis of variance and a subsequent adjustment of simple linear regression for deployment of the interactions between the factors. Contrasts were used to determine the best levels of the factor storage condition. Genotype did not impact cooking time when the storage time and storage conditions were considered. Time and storage conditions affect the cooking time of beans in a dependent manner, but time of storage had the biggest influence. The best conditions for long-term storage of beans ensuring a smaller increase in cooking time is plastic storage at low temperatures. Thus, plastic freezer storage is a practical alternative for consumers.

Responding to Changing Student Demographics in Finland: A Study of Teachers’ Developing Cultural Competence

The aim of this dissertation was to examine the skills and knowledge that pre-service teachers and teachers have and need about working with multilingual and multicultural students from immigrant backgrounds. The specific goals were to identify pre-service teachers’ and practising teachers’ current knowledge and awareness of culturally and linguistically responsive teaching, identify a profile of their strengths and needs, and devise appropriate professional development support and ways to prepare teachers to become equitable culturally responsive practitioners. To investigate these issues, the dissertation reports on six original empirical studies within two groups of teachers: international pre-service teacher education students from over 25 different countries as well as pre-service and practising Finnish teachers. The international pre-service teacher sample consisted of (n = 38, study I; and n = 45, studies II-IV) and the pre-service and practising Finnish teachers sample encompassed (n = 89, study V; and n = 380, study VI). The data used were multi-source including both qualitative (students’ written work from the course including journals, final reflections, pre- and post-definition of key terms, as well as course evaluation and focus group transcripts) and quantitative (multi-item questionnaires with open-ended options), which enhanced the credibility of the findings resulting in the triangulation of data. Cluster analytic procedures, multivariate analysis of variance (MANOVA), and qualitative analyses mostly Constant Comparative Approach were used to understand pre-service teachers’ and practising teachers’ developing cultural understandings. The results revealed that the mainly white / mainstream teacher candidates in teacher education programmes bring limited background experiences, prior socialisation, and skills about diversity. Taking a multicultural education course where identity development was a focus, positively influenced teacher candidates’ knowledge and attitudes toward diversity. The results revealed approaches and strategies that matter most in preparing teachers for culturally responsive teaching, including but not exclusively, small group activities and discussions, critical reflection, and field immersion. This suggests that there are already some tools to address the need for the support needed to teach successfully a diversity of pupils and provide in-service training for those already practising the teaching profession. The results provide insight into aspects of teachers’ knowledge about both the linguistic and cultural needs of their students, as well as what constitutes a repertoire of approaches and strategies to assure students’ academic success. Teachers’ knowledge of diversity can be categorised into sound awareness, average awareness, and low awareness. Knowledge of diversity was important in teachers’ abilities to use students’ language and culture to enhance acquisition of academic content, work effectively with multilingual learners’ parents/guardians, learn about the cultural backgrounds of multilingual learners, link multilingual learners’ prior knowledge and experience to instruction, and modify classroom instruction for multilingual learners. These findings support the development of a competency based model and can be used to frame the studies of pre-service teachers, as well as the professional development of practising teachers in increasingly diverse contexts. The present set of studies take on new significance in the current context of increasing waves of migration to Europe in general and Finland in particular. They suggest that teacher education programmes can equip teachers with the necessary attitudes, skills, and knowledge to enable them work effectively with students from different ethnic and language backgrounds as they enter the teaching profession. The findings also help to refine the tools and approaches to measuring the competencies of teachers teaching in mainstream classrooms and candidates in preparation.

The underestimated role of universities for the Brazilian system of innovation

Conventional wisdom usually underestimates the important role of public research institutes and universities in successful cases of Brazilian economy. History of science and technology institutions shows a long-term process of formation of these institutions and their interactions with industrial firms, agricultural producers or society. This paper investigates historical roots of successful cases of Brazil. First, we present the late onset of National Innovation System (NSI) institutions and waves of institutional formation in Brazil. Second, we describe the history of three selected successful cases, which spans from a low-tech sector (agriculture), a medium-tech sector (steel and special metal alloys), to a high-tech sector (aircraft). These findings present new challenges for present-day developmental policies.

Geochemistry and mineralogical association of heavy metal contaminants in fine grained sediment, Welland River, Southern Ontario /

This investigation of geochemistry and mineralogy of heavy metals in fine grained (<63^m) sediment of the Welland River was imdertaken to: 1) describe metal dispersion patterns relative to a source, identify minerals forming and existing at the outfall region and relate sediment particle size to chemistry; 2) to delineate sample handling, preparation and evaluate, modify and develop analytical methods for heavy metal analysis of complex environmental samples. Ajoint project between Brock University and Geoscience Laboratories was initiated to test a contaminated site of the Welland River at the base of Atlas Speciality Steels Co. Methods were developed and utilized for particle size separation and two acid extraction techniques: 1) Partial extraction; 2) Total extraction. The mineralogical assessment identified calcite, dolomite, quartz and clays. These minerals are typical of the carbonate-shale rock basement of the Niagara Peninsula. Minerals such as, mullite and ferrocolumbite were found at the outfall region. These are not typical of the local geology and are generally associated with industrial pollutants. Partial and total extraction techniques were used to characterize the sediments based on chemical distribution, elemental behaviour and analytical differences. The majority of elements were lower in concentration in the partial extraction technique; suggesting these elements are bound in an acid extractable phase (exchangeable, organic and carbonate phases). The total extraction technique yielded higher elemental concentrations taking difficult oxides and silicates into solution. Geochemical analyses of grain size separates revealed that heavy metal (Co, Ni, V, Mn, Fe, Ba) concentrations did not increase with decreasing grain size. This is a function of the anthropogenic mill scale input into the river. The background elements (Sc, Y, Sr, Mg, Al and Ti) showed an increase in concentration to the finest grain size suggesting that it is directly related to the local mineralogy and geology. Dispersion patterns ofmetals fall into two distinct categories: 1) the heavy metals (Co, Cu, Ni, Zn, V and Cr), and 2) the background elements (Be, Sc, Y, Sr, Al and Ti). The heavy metals show a marked increase in the outfall region, while the background elements show a significant decrease at the outfall. This pattern is attributed to a "dilution effect" ofthe natural sediments by the anthropogenic mill scale sediments. Multivariant statistical analysis and correlation coefficient matrix results clearly support these results and conclusions. These results indicate the outfall region ofthe Welland River is highly contaminated with to heavy metals from the industrialized area of Welland. A short distance downstream, the metal concentrations return to baseline geochemical levels. It appears, contaminants rapidly come out of suspension and are deposited in close proximity to the source. Therefore, it is likely that dredging the sediment from the river may cause resuspension of contaminated sediments, but may not distribute the sediment as far as initially anticipated.

Armor coats, inverse grading, and streambed scour in selected streams of Southern Ontario and Western New York /

Surface size analyses of Twenty and Sixteen Mile Creeks, the Grand and Genesee Rivers and Cazenovia Creek show three distinct types of bed-surface sediment: 1) a "continuous" armor coat which has a mean size of -6.5 phi and coarser, 2) a "discontinuous" armor coat which has a mean size of approximately -6.0 phi and 3) a bed with no armor coat which has a mean surface size of -5.0 phi and finer. The continuous armor coat completely covers and protects the subsurface from the flow. The discontinuous armor coat is composed of intermittently-spaced surface clasts, which provide the subsurface with only limited protection from the flow. The bed with no armor coat allows complete exposure of the subsurface to the flow. The subsurface beneath the continuous armor coats of Twenty and Sixteen Mile Creeks is possibly modified by a "vertical winnowing" process when the armor coat is p«natrat«d. This process results in a welld «v«loped inversely graded sediment sequence.vertical winnowing is reduced beneath the discontinuous armor coats of the Grand and Genesee Rivers. The reduction of vertical winnowing results in a more poorly-developed inverse grading than that found in Twenty and sixteen Mile Creeks. The streambed of Cazenovia Creek normally is not armored resulting in a homogeneous subsurface which shows no modification by vertical winnowing. This streambed forms during waning or moderate flows, suggesting it does not represent the maximum competence of the stream. Each population of grains in the subsurface layers of Twenty and sixteen Mile Creeks has been modified by vertical winnowing and does not represent a mode of transport. Each population in the subsurface layers beneath a discontinuous armor coat may partially reflect a transport mode. These layers are still inversely graded suggesting that each population is affected to some degree by vertical winnowing. The populations for sediment beneath a surface which is not armored are probably indicative of transport modes because such sediment has not been modified by vertical winnowing. Bed photographs taken in each of the five streams before and after the 1982-83 snow-melt show that the probability of movement for the surface clasts is a function of grain size. The greatest probability of of clast movement and scour depth of this study were recorded on Cazenovia Creek in areas where no armor coat is present. The scour depth in the armored beds of Twenty and Sixteen Mile Creeks is related to the probability of movement for a given mean surface size.

Geological image processing of petrographic thin sections using the rotating polarizer stage

One of the fundamental problems with image processing of petrographic thin sections is that the appearance (colour I intensity) of a mineral grain will vary with the orientation of the crystal lattice to the preferred direction of the polarizing filters on a petrographic microscope. This makes it very difficult to determine grain boundaries, grain orientation and mineral species from a single captured image. To overcome this problem, the Rotating Polarizer Stage was used to replace the fixed polarizer and analyzer on a standard petrographic microscope. The Rotating Polarizer Stage rotates the polarizers while the thin section remains stationary, allowing for better data gathering possibilities. Instead of capturing a single image of a thin section, six composite data sets are created by rotating the polarizers through 900 (or 1800 if quartz c-axes measurements need to be taken) in both plane and cross polarized light. The composite data sets can be viewed as separate images and consist of the average intensity image, the maximum intensity image, the minimum intensity image, the maximum position image, the minimum position image and the gradient image. The overall strategy used by the image processing system is to gather the composite data sets, determine the grain boundaries using the gradient image, classify the different mineral species present using the minimum and maximum intensity images and then perform measurements of grain shape and, where possible, partial crystallographic orientation using the maximum intensity and maximum position images.

The sedimentology of unconsolidated deltaic and aeolian sediments east of Dunnville, Ontario /

Surficial sediments east of Dunnville, Ontario representing a limited deltaic/lacustrine/aeolian system are investigated with the aim of defining and interpreting their geological history by means of exarrrrning their sedimentology and interrelationships. The Folk and \oJard grain size statistics of samples fran the area were calculated. These sample parameters were e1en plotted on maps to detennine regional patterns. The strongest pattern observed was one of distinct fining to the east, away fran the sand source. Aeolian deposits were fourrl to be better sorted than the surrcunding sediments. The grain size parameter values were also plotted on bivariate graphs in an attempt to separate the samples according to depositional environment. This exercise met with little success, as rrost of the sediments sampled in the area have similar grain size parameters. This is believed to be because the sediment sources for the different environments (delta, distal delta, aeolian dune) are intimately related, to the point that nnst dunes appear to have been sourcErl fran immediately local sediments. It is FOstulated that in such a srrall sedimentological sub-system, sediments were not involved in active transport for a length of time sufficient for the rraterial to cane to equilibritnn with its transporting medium. Thus, fe..v distinctive patterns of parameters were developed that would enable one to differentiate between various environments of neposition. The i.rnTaturity of rrany dune forms and the i.Imaturity of mineralogical composition of all deposits support the above hyt:XJthesis of limited transport time. Another hypothesis proposen is that eadh geologically or geographically distinct area or "sub-system" rray have its o,.m "signature" of grain size relationships as plotted on bivariate graphs. Thus, the emphasis, concerning graphs of this type, should not be placErl on attempting to nifferentiate between various environnents of deposition, hut raB1er on investigating the interrelationships between sanples am environments within that "sub-system". Through the course of this investigation, the existence of nelta plain distributary Channels in the thesis area is SUG0ested, and the mscovery of significantly mfferent sub-units within the TUnnville dune sediments is documented. It is inferred by reference to other authors interpretations of the glacial history of the area, that the tirre of effective aeolian acti vi ty in the Dunnville area was between 12,300 to 12,100 years R.p.

Determining rotational direction of rotation structures using prolate shaped grains within till

Micromorphology is used to analyze a wide range of sediments. Many microstructures have, as yet, not been analyzed. Rotation structures are the least understood of microstructures: their origin and development forms the basis of this thesis. Direction of rotational movement helps understand formative deformational and depositional processes. Twenty-eight rotation structures were analyzed through two methods of data extraction: (a) angle of grain rotation measured from Nikon NIS software, and (b) visual analyses of grain orientation, neighbouring grainstacks, lineations, and obstructions. Data indicates antithetic rotation is promoted by lubrication, accounting for 79% of counter-clockwise rotation structures while 21 % had clockwise rotation. Rotation structures are formed due to velocity gradients in sediment. Subglacial sediments are sheared due to overlying ice mass stresses. The grains in the sediment are differentially deformed. Research suggests rotation structures are formed under ductile conditions under low shear, low water content, and grain numbers inducing grain-to-grain interaction.

Politics in extraordinary times : a study of the reaction of political parties and elites to terrorism

Cette thèse porte sur le comportement des élites politiques durant les périodes de crise nationale et plus particulièrement sur leurs réactions aux attentats terroristes. Elle démontre que les crises terroristes sont tout comme les conflits militaires ou diplomatiques propices aux unions nationales et notamment aux ralliements des partis d’opposition auprès du gouvernement. L’analyse statistique d’actes terroristes s’étant produits dans cinq états démocratiques (Allemagne, Espagne, États-Unis d’Amérique, France et Royaume-Uni) entre 1990 et 2006 révèle que l’ampleur d’un attentat en termes de pertes humaines ainsi que la répétition de ces attentats influencent dans une large mesure la réaction des élites politiques. Ainsi plus l’ampleur d’un attentat est élevée, plus la probabilité d’un ralliement est grande. En revanche, la multiplication des attentats augmente la possibilité de dissension entre l’opposition et le gouvernement. Par ailleurs, l’opposition est plus susceptible de se rallier au gouvernement lorsque l’attentat est perpétré par des terroristes provenant de l’étranger. L’analyse quantitative indique également que l’existence d’un accord formel de coopération dans la lutte antiterroriste entre le gouvernement et l’opposition favorise l’union des élites. Enfin, les données analysées suggèrent que la proportion des ralliements dans les cinq pays est plus importante depuis les attentats du 11 septembre 2001. Une analyse qualitative portant exclusivement sur la France et couvrant la période 1980-2006 confirme la validité des variables identifiées dans la partie quantitative, mais suggère que les élites réagissent au nombre total de victimes (morts mais aussi blessés) et que la répétition des actes terroristes a moins d’impact lors des vagues d’attentats. Par ailleurs, les analyses de cas confirment que les élites politiques françaises sont plus susceptibles de se rallier quand un attentat vise un haut-fonctionnaire de l’État. Il apparaît également que les rivalités et rancœurs politiques propre à la France (notamment suite à l’arrivée de la gauche au pouvoir en 1981) ont parfois empêché le ralliement des élites. Enfin, cette analyse qualitative révèle que si l’extrême gauche française soutient généralement le gouvernement, qu’il soit de gauche ou de droite, en période de crise terroriste, l’extrême droite en revanche saisit quasi systématiquement l’opportunité offerte par l’acte terroriste pour critiquer le gouvernement ainsi que les partis de l’establishment. La thèse est divisée en sept chapitres. Le premier chapitre suggère que le comportement des élites politiques en période de crises internationales graves (guerres et conflits diplomatiques) est souvent influencé par la raison d’État et non par l’intérêt électoral qui prédomine lors des périodes plus paisibles. Le second chapitre discute du phénomène terroriste et de la littérature afférente. Le troisième chapitre analyse les causes du phénomène d’union nationale, soumet un cadre pour l’analyse de la réaction des élites aux actes terroristes, et présente une série d’hypothèses. Le quatrième chapitre détaille la méthodologie utilisée au cours de cette recherche. Les chapitres cinq et six présentent respectivement les résultats des analyses quantitatives et qualitatives. Enfin, le chapitre sept conclut cette thèse en résumant la contribution de l’auteur et en suggérant des pistes de recherche.