2D-lattice distributed reflector laser

A single-contact, mode-hop-free, single longitudinal mode laser operating cw under large signal modulation at 2.5 Gbit/s at room temperature was created by introducing a short etched region around the ridge-waveguide of a Fabry-Perot laser. The device could be suitable for use in extended range data communications applications.

High coupling in novel 2D-lattice distributed reflector laser gratings

It is shown that 2D lattice gratings, despite being placed outside the waveguide region, exhibit sufficiently strong coupling coefficients that optical modes rapidly couple transversely into the etched grating region, yielding high coupling coefficients of 270cm-1. This performance allows mode-hop-free lasing operation in DBR structures.

Laminar to turbulent flow transition measurements using an array of SOI-CMOS MEMS wall shear stress sensors

The successful utilization of an array of silicon on insulator complementary metal oxide semiconductor (SOICMOS) micro thermal shear stress sensors for flow measurements at macro-scale is demonstrated. The sensors use CMOS aluminum metallization as the sensing material and are embedded in low thermal conductivity silicon oxide membranes. They have been fabricated using a commercial 1 μm SOI-CMOS process and a post-CMOS DRIE back etch. The sensors with two different sizes were evaluated. The small sensors (18.5 ×18.5 μm2 sensing area on 266 × 266 μm2 oxide membrane) have an ultra low power (100 °C temperature rise at 6mW) and a small time constant of only 5.46 μs which corresponds to a cut-off frequency of 122 kHz. The large sensors (130 × 130 μm2 sensing area on 500 × 500 μm2 membrane) have a time constant of 9.82 μs (cut-off frequency of 67.9 kHz). The sensors' performance has proven to be robust under transonic and supersonic flow conditions. Also, they have successfully identified laminar, separated, transitional and turbulent boundary layers in a low speed flow. © 2008 IEEE.

Flexible array sensors based on zinc oxide nanowires for touch displays

Recent efforts towards the fabrication of touch sensing systems are presented, in which zinc oxide nanowire arrays are embedded in a polymer matrix to produce an engineered composite material. In the future, these sensor systems will be fully flexible and multi-touch as intended for Nokia's 'Morph' concept device.

The dazzling array of basal branches in the mtDNA macrohaplogroup M from India as inferred from complete genomes

Many efforts based on complete mitochondrial DNA (mtDNA) genomes have been made to depict the global mtDNA landscape, but the phylogeny of Indian macrohaplogroup M has not yet been resolved in detail. To fill this lacuna, we took the same strategy as in o

SOCIAL-DEVELOPMENT OF INFANTS OF MACACA-THIBETANA AT MOUNT-EMEI, CHINA

The development of infant Macaca thibetana was studied at Mount Emei, China, and compared to that of other macaque species. It was found that there are many common features in the process of infant socialization in species of the genus Macaca: mothers play an important and active role, other group members influence the infants' development to a greater or lesser extent and play is a major activity in the life of infants. Some differences were found to exist, however, between macaque species. These included differences in maternal care behaviour such as 'len', leaving time and weaning time. Paternal behaviours were also found to vary within and among species. Tibetan macaque males care for infants extensively, and they may use infants as an agonistic buffer. The natural and social environment may also influence differences between macaque species in infant development.

NATURAL FOODS AND THEIR ECOLOGICAL IMPLICATIONS FOR MACACA-THIBETANA AT MOUNT EMEI, CHINA

Natural food plants of partly provisioned groups of Macaca thibetana included about 196 species belonging to 135 genera and 72 families. The macaques consumed mainly bamboo shoots and fruits for about 2 months in autumn, whereas they relied on active or passive provisions from visitors, a variety of structural parts of plants and a small amount of invertebrates in late spring and summer and ate mainly mature leaves and bark for the rest of the year. About half of the species eaten came from the dense herb and shrub layers. This forest-dwelling species shows a distinctive feeding and foraging pattern in comparison with other macaques, explaining why M. thibetana has the largest body weight of all macaques.

DRAMATIC CONSEQUENCES OF FOOD HANDOUTS TO MACACA-THIBETANA AT MOUNT-EMEI, CHINA

Food handouts to Macaca thibetana at Mt. Emei have had dramatic consequences for both man and monkey as tourism has increased over the last decade. Food handouts and human submissive behaviour facilitate beg-robbing by the monkeys. which can be regarded as a mixed conditioning chain. Because of their lack of understanding of primate behaviour and resulting inappropriate responses, many visitors have lost possessions and have been severely frightened or even injured; in fact there have been 1 0 deaths as an indirect result over that past 8 years. The appropriate human response proved to be the display of dominance to maintain a distance from a beg-robbing monkey. Road-ranging macaques have also been injured or killed by visitors to obtain meat or bones or merely for amusement. Attempts should be made to eliminate the negative effects of food handouts by increasing visitors' awareness of behavioural and ecological aspects and through aversive conditioning of the macaques.

Operation of a high frequency piezoelectric ultrasound array with an application specific integrated circuit

Integration of a piezoelectric high frequency ultrasound (HFUS) array with a microfabricated application specific integrated circuit (ASIC) performing a range of functions has several advantages for ultrasound imaging. The number of signal cables between the array/electronics and the data acquisition / imaging system can be reduced, cutting costs and increasing functionality. Electrical impedance matching is also simplified and the same approach can reduce overall system dimensions for applications such as endoscopic ultrasound. The work reported in this paper demonstrates early ASIC operation with a piezocomposite HFUS array operating at approximately 30 MHz. The array was tested in three different modes. Clear signals were seen in catch-mode, with an external transducer as a source of ultrasound, and in pitch-mode with the external transducer as a receiver. Pitch-catch mode was also tested successfully, using sequential excitation on three array elements, and viable signals were detected. However, these were relatively small and affected by interference from mixed-signal sources in the ASIC. Nevertheless, the functionality and compatibility of the two main components of an integrated HFUS - ASIC device have been demonstrated and the means of further optimization are evident.

Small-diameter membrane reflector wrinkling

This study concerns the wrinkling performance of thin membranes for use as novel reflectors in space-based telescopes. We introduce small-scale experiments for inducing and interrogating wrinkling patterns in at membranes, and we capture these details computationally by performing a range of finite element analysis. The overall aim is to assess the sophistication of modelling, to verify the feasibility of a small-diameter reector concept proposed in accompanying work. © 2009 by the American Institute of Aeronautics and Astronautics, Inc.

Ultrasmall microlens array based on vertically aligned carbon nanofibers.

An ultrasmall tunable microlens with a diameter of 1.5 μm is fabricated using nematic liquid crystals (electrically tunable medium) and vertically aligned carbon nanofibers (CNFs, electrodes). Individual CNFs are grown at the center of circular dielectric regions. This allows the CNFs to produce a more Gaussian electric field profile and hence more uniformity in lens array switching.