404 resultados para Acacia holosericea
Resumo:
A tannin-phenolic resin (40 wt% of tannin, characterized by H-1 nuclear magnetic resonance (NMR) and C-13 NMR, Fourier transform infrared, thermogravimetry, differential scanning calorimetry) was used to prepare composites reinforced with sisal fibers (30-70 wt%). Inverse gas chromatography results showed that the sisal fibers and the tannin-phenolic thermoset have close values of the dispersive component and also have predominance of acid sites (acid character) at the surface, confirming the favoring of interaction between the sisal fibers and the tannin-phenolic matrix at the interface. The Izod impact strength increased up to 50 wt% of sisal fibers. This composite also showed high storage modulus, and the lower loss modulus, confirming its good fiber/matrix interface, also observed by SEM images. A composite with good properties was prepared from high content of raw material obtained from renewable sources (40 wt% of tannin substituted the phenol in the preparation of the matrix and 50 wt% of matrix was replaced by sisal fibers). (C) 2012 Elsevier Ltd. All rights reserved.
Resumo:
Productive and reproductive traits of beehives are influenced by climate and food availability in the region where the bees are reared or maintained, thus honey and pollen storage, egg-laying conditions of the queen as well as comb occupation are subject to seasonal variations. The present study was conducted in the apiary of the Department of Entomology and Acarology, College of Agriculture Luiz de Queiroz, ESALQ/USP, in the municipality of Piracicaba, in an area containing fruit trees, ornamental plants and a fragment of a native forest. The objective was to identify protein sources used by honeybees (Apis mellifera) over a whole year (2010-2011) in remnants of the Atlantic forest, information that can be used in the conservation and restoration of degraded areas. For sample preparation, the acetolysis method was adopted (Eredtman 1952) and the quantitative analysis was performed by counting successive samples of 900 grains per sample which were grouped by botanical species and/or pollen types. The results show that the bees used various plant types in the area, including ruderal species, to maintain their colonies. Apis mellifera seeks food sources in all plants in the surroundings of the apiary, including herbaceous, shrubs, trees, native or introduced. Eucalyptus sp. played an important role as a food source in all seasons due to its wide availability around the apiary and its high flower production. The most frequent pollen types (greater than 10% of the sample) were Anadenanthera sp., Acacia sp, Miconia sp. and Eucalyptus sp. in winter; Philodendron sp., Mikania cordifolia, Parthenium and Eucalyptus sp. in spring; Alternanthera ficoidea, Chamissoa altissima and Eucalyptus sp. in summer; Philodendron sp., Raphanus sp. and Eucalyptus sp. in autumn.
Resumo:
Mastitis is the most common infectious disease affecting dairy cattle; in addition, it remains the most economically important disease of dairy industries around the world. Streptococcus agalactiae, a contagious pathogen associated with subclinical mastitis, is highly infectious. This bacterium can cause an increase in bulk tank bacterial counts (BTBC) and bulk tank somatic cell counts (BTSCC). The microbiological identification of S. agalactiae in samples from bulk tanks is an auxiliary method to control contagious mastitis. Thus, there are some limitations for time-consuming cultures or identification methods and additional concerns about the conservation and transport of samples. Bulk tank samples from 247 dairy farms were cultured and compared through polymerase chain reaction (PCR), directed to 16S rRNA genes of S. agalactiae, followed by BTBC and S. agalactiae isolation. The mean value of BTBC was 1.08 x 10(6) CFU mL(-1) and the bacterium was identified through the microbiological method in 98 (39.7%; CI95% = 33.8-45.9%) and through PCR in 110 (44.5%; CI95% = 38.5-50.8%) samples. Results indicated sensitivity of 0.8571 +/- 0.0353 (CI95% = 0.7719-0.9196) and specificity of 0.8255 +/- 0.0311 (CI95% = 0.7549-0.8827). The lack of significant difference between microbiological and molecular results (kappa = 0.6686 +/- 0.0477 and CI95% = 0.5752-0.7620) indicated substantial agreement between the methods. This suggests that PCR can be used for bulk tank samples to detect contagious mastitis caused by S. agalactiae. (C) 2011 Elsevier Ltd. All rights reserved.
Resumo:
Solanum lycocarpum St.-Hil (Solanaceae) is a hairy shrub or small much-branched tree of the Brazilian Cerrado, popularly known as "fruit-of-wolf". Considering that the induction of chromosomal mutations is involved in the process of carcinogenesis, and that S. lycocatpum is often used in folk medicine, it becomes relevant to study its effect on genetic material. In this sense, the aim of present study was to determine the possible cytotoxic, genotoxic and antigenotoxic potentials of S. lycocarpum fruits glycoalkaloid extract (SL) in Chinese hamster lung fibroblasts (V79 cells). The cytotoxicity was evaluated by the colony forming assay, apoptosis and necrosis assay. Trypan blue exclusion dye method and mitotic index. Genotoxic and antigenotoxic potential were evaluated by comet and chromosomal aberrations assays. Four concentrations of SL (4, 8, 16 and 32 mu g/mL) were used for the evaluation of its genotoxic potential. The DNA damage-inducing agent methyl methanesulfonate (MMS, 221 mu g/mL) was utilized in combination with extract to evaluate a possible protective effect. The results showed that SL was cytotoxic at concentrations above 32 mu g/mL by the colony forming assay. For apoptosis and necrosis assay, the concentration of 64 mu g/mL of SL showed statistically significant increase in cell death by apoptosis and necrosis, while the concentrations of 128 and 256 mu g/mL of SL demonstrated statistically significant increase in cell death by necrosis, compared with the control group. Analysis of cell viability by Trypan blue exclusion indicated >96% viability for treatments with concentrations up to 32 mu g/mL of SL No significant differences in MI were observed between cultures treated with different concentrations of 51 (4, 8, 16 and 32 mu g/mL) alone or in combination with MMS and the negative control, indicating that these treatments were not cytotoxic. The comet and chromosomal aberrations assays revealed that SL does not display genotoxic activity. Moreover, the different concentrations of SL showed protective effect against both genomic and chromosomal damages induced by MMS. (C) 2012 Elsevier Ltd. All rights reserved.
Resumo:
This research assessed the value chain of gum and resins, which are available in four woreda in the southern lowlands of Ethiopia. They are Moyale Somali, Moyale Oromia, Dhas and Dire woreda. The output of this research is the elaboration of three value chains. The first is a general one for all the woreda, while the other two concern the Moyale and Dubluk markets. The assessed products are the gum arabic from Acacia trees and the resin exuded by the dunkhal tree - Boswellia family. The aim of this study was not only to understand the way in which resins and gum gain value through the chain and the profit each stakeholder gains, but more importantly how pastoralists use resin and gum collection to diversify their income. The first chapter analyses what it means to be a pastoralist in the Moyale area and its challenges. The second chapter describes how the policies of the central state influenced the pastoral access to rangelands and water and the way in which this contributed to the increase of conflict among the different groups. A particular focus is on the settlement. The third chapter describes the different ethnic groups living in the studied area and their management system to preserve resources and cope with the dry season. This chapter considers the dynamic evolution of the relations among the various groups in terms of negotiating access to resources while facing political and climatic challenges. The fourth chapter illustrates the physical context and the environment, and the way in which it has been managed in order to preserve the pastoral lifestyle. The fifth chapter describes the characteristics of gum and resins in the studied area. Finally, the sixth chapter describes how the value chain methodology was applied in this specific study and its outputs.
Resumo:
The effects of superovulatory treatment (follicle stimulating hormone [FSH] versus human menopausal gonadotropin [HMG]) and of route of administration (intramuscular versus intravenous) of prostaglandin F2a (PGF2a) on hormonal profiles were determined in 32 Angus x Hereford heifers for breeding and subsequent embryo collection and transfer. Heifers were superstimulated either with FSH (total of 26 milligrams) or HMG (total of 1,050 international units) beginning on days 9 to 12 of an estrous cycle and PGF2a (40 milligrams) was administered at 60 and 72 hours after the beginning of superovulatory treatments. Heifers were artificially inseminated three times at 12-hour intervals beginning 48 hours after PGF2a treatment. Blood serum samples were collected immediately before treatments began and at frequent intervals until embryo collection 288 hours later. Concentrations of luteinizing hormone (LH) and FSH were not affected by hormone treatments, route of PGF2a injection, or interactions between them. Estradiol-17ß (E2-17ß) levels were higher in HMG- than in FSH-treated heifers 60 hours after gonadotropin treatment. Peak concentration of E2-17ß occurred earlier in HMGthan in FSH-treated heifers and earlier in heifers injected with PGF2a intramuscularly than those injected intravenously. Progesterone concentrations were not influenced by treatment or route of PGF2a administration. The progesterone:E2-17ß ratio was higher in FSH- than in HMG-treated heifers 24 hours after the LH peak. The high steroid hormone concentrations in superovulated beef heifers before and after ovulation may lead to asynchrony between stages of embryonic development, a situation that may interfere with the pregnancy outcome of superovulated embryos in recipient animals.
Resumo:
In situ diffusion experiments are performed in geological formations at underground research laboratories to overcome the limitations of laboratory diffusion experiments and investigate scale effects. Tracer concentrations are monitored at the injection interval during the experiment (dilution data) and measured from host rock samples around the injection interval at the end of the experiment (overcoring data). Diffusion and sorption parameters are derived from the inverse numerical modeling of the measured tracer data. The identifiability and the uncertainties of tritium and Na-22(+) diffusion and sorption parameters are studied here by synthetic experiments having the same characteristics as the in situ diffusion and retention (DR) experiment performed on Opalinus Clay. Contrary to previous identifiability analyses of in situ diffusion experiments, which used either dilution or overcoring data at approximate locations, our analysis of the parameter identifiability relies simultaneously on dilution and overcoring data, accounts for the actual position of the overcoring samples in the claystone, uses realistic values of the standard deviation of the measurement errors, relies on model identification criteria to select the most appropriate hypothesis about the existence of a borehole disturbed zone and addresses the effect of errors in the location of the sampling profiles. The simultaneous use of dilution and overcoring data provides accurate parameter estimates in the presence of measurement errors, allows the identification of the right hypothesis about the borehole disturbed zone and diminishes other model uncertainties such as those caused by errors in the volume of the circulation system and the effective diffusion coefficient of the filter. The proper interpretation of the experiment requires the right hypothesis about the borehole disturbed zone. A wrong assumption leads to large estimation errors. The use of model identification criteria helps in the selection of the best model. Small errors in the depth of the overcoring samples lead to large parameter estimation errors. Therefore, attention should be paid to minimize the errors in positioning the depth of the samples. The results of the identifiability analysis do not depend on the particular realization of random numbers. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Conférence donnée à l’invitation de la Société des lecteurs de Claude Simon, Université Paris 7-Diderot, 1er février 2014.
Resumo:
Pollen and stable carbon (d13C) and hydrogen (dD) isotope ratios of terrestrial plant wax from the South Atlantic sediment core, ODP Site 1085, is used to reconstruct Miocene to Pliocene changes of vegetation and rainfall regime of western southern Africa. Our results reveal changes in the relative amount of precipitation and indicate a shift of the main moisture source from the Atlantic to the Indian Ocean during the onset of a major aridification 8 Ma ago. We emphasise the importance of declining precipitation during the expansion of C4 and CAM (mainly succulent) vegetation in South Africa. We suggest that the C4 plant expansion resulted from an increased equator-pole temperature gradient caused by the initiation of strong Atlantic Meridional Overturning Circulation following the shoaling of the Central American Seaway during the Late Miocene.
Resumo:
Middle Miocene to Holocene pollen assemblages reveal a history of environmental change in northern Australia. Grass pollen appeared, but was rare, in the late Miocene and was consistently present throughout the Pliocene, but did not become abundant until the Pleistocene. Myrtaceae pollen, characteristic of late Cenozoic assemblages in eastern Australia, is poorly represented, and no unequivocal evidence of rain forest was found.
Resumo:
Se analizaron las pérdidas de biodiversidad vegetal en un área desmontada de las cerrilladas pedemontanas de Mendoza, Argentina. El análisis de la vegetación y su flora reveló la pérdida total de las comunidades vegetales de Larrea cuneifolia Cav., bosques riparios de Acacia furcatispina Burkart y de álveos y de la flora compuesta de 30 familias de plantas, 72 géneros y 84 especies. Esta última incluyó la de 34,1 % de especies endémicas, 58,8 % nativas, 4,7 % adventicias y 2,4 % introducidas. Se sugiere tener en cuenta estos tipos de estudios antes de realizar planificaciones urbanas sobre la vegetación natural con el fin de reconocer las comunidades vegetales y su flora y rescatar sus bancos de germoplasma.
Resumo:
Evaluar la contaminación por metales pesados en los ecosistemas permite conocer la capacidad bioindicativa de especies vegetativas. El objetivo fue determinar la concentración de metales pesados en Prosopis laevigata, Acacia spp. y Schinus molle bajo el efecto de usos suelo y temporalidad. El área se sitúa en la colindancia de los Municipios de Soledad de Graciano Sánchez y San Luis Potosí fragmentada por usos de suelo: agropecuario, comercio y servicios, residencial urbano y minero. Fueron tomadas muestras de hojas de las tres especies en las estaciones de verano, otoño, invierno y primavera y se evaluó la concentración de metales pesados a través de la técnica de ICP-MS. Los análisis estadísticos indicaron niveles de Aluminio (Al) > Cinc (Zn) > Plomo (Pb) > Cobre (Cu) > Titanio (Ti) > Vanadio (V) > Arsénico (As) > Cromo (Cr) > Cadmio (Cd) > Cobalto (Co). Los elementos Al, As, Cd, Cr, Pb y Ti presentaron niveles por encima del umbral normal en vegetación. El uso de suelo tuvo efecto significativo con Al, Ti, Cd, As y Pb; los árboles ubicados en los usos de suelo minero, comercio y servicios tuvieron la mayor concentración. La especie tuvo efecto significativo con Al y Pb siendo Acacia spp. el que presentó la mayor capacidad de acumulación. La temporada del año impactó significativamente en la acumulación de As, Cd, Co, Cu, Cr y Ti en las tres especies. La dinámica antropogénica de los diferentes usos de suelo genera partículas y residuos con metales pesados impactando en la disponibilidad y acumulación en las especies evaluadas. Se contribuye a evaluar el impacto ambiental en el sistema fragmentado recomendando dar continuidad a este tipo de estudios.
Resumo:
El objetivo del trabajo fue evaluar la respuesta de plantas jóvenes de cuatro especies forestales urbanas a diferentes niveles de déficit hídrico. El ensayo se realizó en vivero, durante tres ciclos vegetativos, con plantas de Platanus x hispanica cv. acerifolia (plátano), Morus alba (morera), Fraxinus americana (fresno americano) y Acacia visco (visco). Los tratamientos de riego fueron: control (reposición del 100% transpirado); riego deficitario moderado (reposición del 66% transpirado) y riego deficitario severo (reposición del 33% transpirado). Las variables de respuesta evaluadas fueron altura, diámetro de tallos, área foliar y ancho de anillos de crecimiento. Las plantas bajo riego deficitario severo presentaron disminuciones en todos los parámetros de crecimiento considerados. Acacia visco resultó con crecimientos comparables al control, bajo riego deficitario equivalente al 66% del agua transpirada, con lo cual puede ser considerada especie de interés para forestaciones en condiciones de estrés hídrico moderado.
Resumo:
We present a high-resolution reconstruction of tropical palaeoenvironmental changes for the last deglacial transition (18 to 9 cal. kyr BP) based on integrated oceanic and terrestrial proxies from a Congo fan core. Pollen, grass cuticle, Pediastrum and dinoflagellate cyst fluxes, sedimentation rates and planktonic foraminiferal d18O ratios, uK37 sea-surface temperature and alkane/alkenone ratio data highlight a series of abrupt changes in Congo River palaeodischarge. A major discharge pulse is registered at around 13.0 cal. kyr BP which we attribute to latitudinal migration of the Intertropical Convergence Zone (ITCZ) during deglaciation. The data indicate abrupt and short-lived changes in the equatorial precipitation regime within a system of monsoonal dynamics forced by precessional cycles. The phases of enhanced Congo discharge stimulated river-induced upwelling and enhanced productivity in the adjacent ocean.