Growth and yield analysis in different methods of beet (Cv. 'tall top early wonder') plantation

This objective of this study was to evaluate the effects of different methods of red beet seedling production and direct sowing on the development of the plant in field conditions. 'Tall Top Early Wonder' was used as the cultivar. The experimental design was a randomized blocks with 4 replications of each treatment: T1 - seedling produced in trays of 288 cells; T2 - 200 cells; T3 - 128 cells; T4 - 128 cells; T5 - direct sowing and T6 - bare-root seedling. The seedlings produced in trays and bare root seedlings were transplanted in the field 28 DAS with spacing of 0.20 x 0.10m. The mean height of plants, leaf area, leaf dry matter, petiole dry matter, shoot dry matter, root dry matter, relationship between shoot dry matter and root dry matter, absolute growth rate, relative growth rate, net assimilation rate, leaf area ratio and specific leaf area were determined. Storage root fresh matter and mean storage root diameter were determined starting from 77 DAS. Initial growth of the plants were superior for the direct sowing, resulting in smaller RGR and NAR than the other treatments. Independent of the production method, an increase of the cycle of the crop was verified. T6 had larger delay in the initial development. There was no difference for productivity. Method T1, had less expenses with respect to substrate and space in the vegetation home, without reduction in production.

Evaluation of the development of Fafia - Pfaffia glomerata (Spreng.) Pedersen

The aim of this experiment is to evaluate the development in height of the plants of four accessions (2 from Parana - accession 1 and 2, one from São Paulo - accession 3, and one from Mato Grosso do Sul State- accession 4). The experimental design was made of randomized blocks, with four treatments (accessions) and four replications. In each plot were planted 24 seedlings. Five evaluations of the height were accomplished, with an interval of two months, starting from the second month after the planting of the seedlings. The results show a significant difference between accession 4 and other three accessions in first evaluation (141.42 % higher than accession 2, the lowest of three and 44.16 % higher than accession 3, the highest of three), demonstrating a higher vigour of this accession on initial stage of its development. In the second and third evaluation, all accessions have no statistical difference, demonstrating a similar level of development at intermedial stages of development. At 5 th evaluation, all accessions have almost the same result, with no statistical difference among them. This is a clear result of similar level of development of this species in these accessions, representing a stabilization of their height development at the end of first year. We concluded that fáfia possesses a strong initial growth, with visible difference among the accessions in the first months. From the eight month on, we observed a slight decrease in the height. This suggests the end of annual cycle.

Nutritional and social hierarchy establishment of the primitively eusocial wasp Mischocyttarus cassununga (Hymenoptera, Vespidae, Mischocyttarini) and related aspects

The results on the nutritional influence in the social hierarchy establishment among females from six colonies of Mischocyttarus cassununga show that: - there was no caste determination in the pre-imaginal period concerning ingested food quantities, however, in relation to qualification (proteins and carbohydrate) the Mann-Whitney test applied showed variation among colonies: in two colonics (colony 3, p=0.0209; colony 4, p=0.0090) the larvae which ingested a higher quantity of solid food became adults of hierarchically higher position, however in two other colonies, colony 1 (p=0.6744) and colony 2 (p=0.3367) this difference was not statistically significant; in two experimentally manipulated colonies the caste determination was observed in the imaginal phase (it was verified that the larger the food quantity consumed, the higher the assumed hierarchical position by the individuals); - adult individuals of hierarchically higher position in two colonies ingested a greater amount of solid than liquid food (Mann-Whitney; p ≤ 0.05), however in the other three colonies there was no difference. It can be seen that for all colonies (2, 3, 4, 5 and 6) the high tendency to solid food ingestion occurs. In colony 1, this data was not collected because the observation purpose was different); - inside the colony hierarchy, the older individuals were the ones that occupied higher hierarchical positions; - more than one inseminated female per colony was found in the two experimentally manipulated colonies ; - ovarian development is greater in inseminated females; - the average height of the 3rd tergite was greater for inseminated females, indicating an adaptation to accommodate larger ovary development (t-Student test; p ≤ 0.05).

Production of four cultivars of iceberg lettuce, under protected cultivation, with and without black polyethylene ground cover

The aim of the work was to evaluate the performance of four cultivars of iceberg lettuce, in a greenhouse, with and without ground cover. The experimental design adopted was that of subdivided parcels, where parcels were provided with and without ground cover consisting of black polyethylene and the subparcels consisted of the cultivars. There were three repetitions per treatment and six central plants of each parcel were evaluated. Drip irrigation was utilized. The cultivars studied were: 'Laurel', 'AF-389', 'Mayara' and 'Tainá'. The seeds were planted in Styrofoam trays with 288 cells containing the substrate Plantmax Hortaliças® A. The trays were kept in a greenhouse until transplanting, 25 days after seeding. The parameters examined were: fresh weight of the aerial part per plant, longitudinal (DL) and transverse (DT) diameters of the head, height of the plant and mean number of leaves per plant. Only among the cultivars there were significant differences in transverse and longitudinal diameters of the head and height of the plant. No significant interactions were detected between ground cover and cultivars. With regard to longitudinal and transverse diameters, 'AF-839' (DL = 27.11 cm; DT = 24.53 cm) showed smaller diameters than those of 'Laurel' (DL = 31.13 cm; DT = 30.55 cm), but did not differ from the other cultivars. In regard to height of the plants, 'Laurel' (20.66 cm) had the greatest value and 'AF-839' (16.02 cm) the lowest. The cultivars did not differ with respect to mean number of leaves and fresh weight of the aerial part of the plant. It is concluded that there were no significant differences in the cultivation of the iceberg lettuce with and without ground cover. The cultivar 'Laurel' stood out with respect to longitudinal and transverse diameters and height of the plant, only differing from the 'AF-839' with regard to the diameters.

Theoretical model and experimental analysis of glulam beam reinforced with FRP

This work present a study of glulam beams reinforced with FRP. It was developed a theoretical model that calculates strength and stiffness of the beams. The model allows for the calculation of the bending moment, the hypothetical distribution of linear strains along the height of the beam, and considers the wood has a linear elastic fragile behavior in tension parallel to the fibers and bilinear in compression parallel to the fibers, initially elastic and subsequently inelastic, with a negative decline in the stress-strain diagram. The stiffness was calculated by the transformed section method. Twelve non-reinforced and fiberglass reinforced glulam beams were evaluated experimentally to validate the proposed theoretical model. The results obtained indicate good congruence between the experimental and theoretical values.

Including the sub-grid scale plume rise of vegetation fires in low resolution atmospheric transport models

We describe and begin to evaluate a parameterization to include the vertical transport of hot gases and particles emitted from biomass burning in low resolution atmospheric-chemistry transport models. This sub-grid transport mechanism is simulated by embedding a 1-D cloud-resolving model with appropriate lower boundary conditions in each column of the 3-D host model. Through assimilation of remote sensing fire products, we recognize which columns have fires. Using a land use dataset appropriate fire properties are selected. The host model provides the environmental conditions, allowing the plume rise to be simulated explicitly. The derived height of the plume is then used in the source emission field of the host model to determine the effective injection height, releasing the material emitted during the flaming phase at this height. Model results are compared with CO aircraft profiles from an Amazon basin field campaign and with satellite data, showing the huge impact that this mechanism has on model performance. We also show the relative role of each main vertical transport mechanisms, shallow and deep moist convection and the pyro-convection (dry or moist) induced by vegetation fires, on the distribution of biomass burning CO emissions in the troposphere.

Performance of different genotypes of vegetable soybeans in Jaboticabal-SP

The study was conducted in the field, in the experimental area of the Section of Crop Production and Aromatic Medicinal Plants, belonging to the Faculty of Agricultural and Veterinary Sciences, Jaboticabal Campus-SP. The aim of the study was to assess the performance of seven genotypes of vegetable soybeans in Jaboticabal-SP. The experiment was carried out in a complete randomized block design with seven treatments (genotypes) and four replications. The genotypes examined were: CNPSOI, JLM003, JLM010, JLM018, JLM019, JLM024 and BRS216. The seeds were obtained from EMBRAPA-Soja and EMBRAPA- Hortaliças, and planted in Styrofoam trays with 128 cells containing Plantmax Hortaliças® as substrate. Transplanting occurred 10 d after seeding when the seedlings showed 2 or 3 definitive leaves and about 12 cm in height, demonstrating that the soil had been properly prepared according to the recommendations for this crop. Pests and diseases were adequately controlled in the event of their occurrence in the experimental area and in accordance with technical recommendations for the chemical products utilized. Collections were carried out based on the maturation of the pods, according to the scale of Fehr and Caviness (1977) adapted by Costa and Marchezan (1982), when the pods reached the reproductive stage R6. The parameters determined were mean precocity, height of the first pod, mean number of pods per plant, mean number of seeds per pod, fresh weight of 100 seeds and total yield of immature grains. Based on the results obtained, the genotypes JLM003 and JLM010 were found to be most indicated for growing vegetable soybeans, because of their capacity to produce immature grains of 1090 and 848 g·m-2, respectively, and fresh weights for 100 seeds of 62.20 and 68.19 g, respectively.

Effect of plastic film mulch on the production of butterhead lettuce cultivars under protected cultivation

The study was performed in a greenhouse with the aim of evaluating the production of butterhead lettuce cultivars with and without plastic film mulch in the summer. The cultivars studied were 'Elisa', 'Lídia', 'Herman' and 'Luísa'. The experimental design was a split plot, in which the main plot was plastic film mulch (with or without black polyethylene film) and the subplots were the cultivars, with three repetitions. The seedlings were grown in Styrofoam trays of 288 cells and transplanted 25 days after seeding in a space of 25 × 25 cm. Harvests were carried out 45 days after transplanting and the following variables were determined: fresh and dry weights of the aerial part, number of leaves per plant, plant height and the longitudinal and transverse diameters of the plant. Significant differences were found only among the cultivars for the characteristics studied, with no cover × cultivar interaction. Fresh weight of the aerial part of 'Lídia' (270.9 g) was greater than that of 'Herman' (142.5 g), but did not differ from those of 'Luísa' (229.8 g) or 'Elisa' (204.8). The dry weight of the aerial part of 'Lídia' (12.4 g) differed statistically only with respect to that of 'Herman' (7.9 g). The cultivars 'Luísa' and 'Elisa' had an aerial part dry weight of 11.4 and 11.2 g, respectively. The number of leaves per plant of the cultivars 'Luísa' (45.1) and 'Elisa' (43.0) was higher than for 'Herman' (24.05), but did not differ from that of the cultivar 'Lídia' (39.5). The mean transverse and longitudinal diameters, as well as the mean height of the plants, showed that 'Lídia', 'Elisa' and 'Luísa' had the greatest values. The cultivars 'Lídia', 'Elisa' and 'Luísa' were the most productive and plastic film mulch had no effect on lettuce production under protected cultivation.

Compatibility of grafting in the melon cv. bônus No. 2, and effects on production

Twelve rootstocks were evaluated: 1) pumpkin 'Big Power' (Cucurbita ntoschata); 2) pumpkin 'Seca' (Cucurbita moschata); 3) bottle gourd 'Longa' (Lagenaria siceraria); 4) 'Cachi' (Lagenaria siceraria); 5) bottle gourd 'Marimba' (Lagenaria siceraria); 6) 'Mogango' (Cucurbita maxima); 7) pumpkin 'Kirameki' (Cucurbita moschata); 8) pumpkin 'Caravela' (Cucurbita moschata); 9) pumpkin 'Shelper' (Cucurbita moschata); 10) 'Gherkin' (Cucumis anguria); 11) 'Loofah' (Luffa cylindrica); and 12) pumpkin 'Goianinha' (Cucurbita moschata) with respect to compatibility with melon yield, and the production and quality of fruits from cv. Bônus No. 2, non-grafted and grafted with 9 of these rootstocks (1, 2, 4, 5, 6, 7, 9, 10 and 11). The bottle gourd 'Marimba' provided the highest percentage of grafting success between the vine and rootstock. The rootstocks 1, 2, 3, 4 and 7 did not differ from bottle gourd 'Marimba', therefore also indicating good compatibility with the melon cv. Bônus No. 2. For height of the plants, it was shown in the first evaluation that rootstock 5 produced a greater height of the plant, differing only from rootstocks 7, 8, 9, 10 and 11 and non-grafted cv. Bônus No. 2. In the second evaluation, 'Big Power' showed the greatest value for height of the plant, differing only from combinations with 'Cachi', 'Mogango', 'Shelper' and 'Loofah'. With regard to number of leaves, in the first evaluation rootstocks 3, 4 and 6 had the greatest number of leaves, but in the second 4, 9 and 11 had the greatest. For dry weight of the stem, the greatest value was obtained with 'Mogango' in the first evaluation and with 'Big Power' in the second. For leaf area of the plants, a difference was found among the treatments only in the first evaluation, where the combination with bottle gourd 'Longa' showed a greater leaf area, but did not differ from the combinations with rootstocks 1, 4, 5 and 6. Differences were demonstrated among the treatments only for the transverse diameter of the fruit, where the combination with rootstock bottle gourd 'Marimba' showed the greatest value, differing only from the combination with 'Gherkin'. There were no significant differences for the mean longitudinal diameter, pulp thickness and total soluble solids among the treatments studied.

Dimensional alterations and solubility of new endodontic sealers

This study evaluated the dimensional alterations and the solubility of two experimental endodontic sealers based on Copaifera multijuga oil-resin (Biosealer) and castor oil bean cement (Poliquil), maintained in different storage solutions. Twenty specimens (3 mm diameter and 2 mm height) of each sealer were assigned to 2 groups (n=10) according to the storage solution: simulated tissue fluid (STF) or distilled water (DW). The specimens were stored in these solutions during 90 days, being removed every 30 days for weighting. The solutions were renewed every 15 days. The results were subjected to statistical analysis by Dunn's and Mann-Whitney tests (α=0.05). The solubility of Poliquil was higher in STF (38.4 ± 36.0) than in DW (28.4 ± 15.0), while Biosealer showed higher solubility in DW (34.61 ± 6.0) than in STF (18.59 ± 8.0). The storage solution influenced the behavior of sealers in relation to the weight variation (p=0.0001). Poliquil presented higher variation of weight independent of the solution (p=0.239). Biosealer also presented higher variation of weight regardless of the solution (p=0.0001). The solubility of Biosealer was different from that of Poliquil, but both sealers showed low solubility in STF. Under the tested conditions, neither of the materials were according to the ADA'S specification.

Influence of the construction bite vertical and horizontal dimensions on dentoskeletal structures induced by the Klammt appliance in Class II treatment

Aim: To evaluate the influence of construction bite in the dentoskeletal changes induced by Klammt Appliance. Methods: The sample consisted of 17 children, with Class II malocclusion and initial mean age of 8.5 years. The construction bite was obtained using an Exactobite on edge-toedge anteroposterior relationship with 3 mm interincisal clearance. The height of the acrylic was determined by initial overbite associated to interincisal clearance and measured with digital caliper. The amount of advancement was obtained and measured by initial overjet in the lateral radiography. Pearson's correlation, linear regression and ANOVA were used to determine the relationship between dentoskeletal and construction bite variables. Results: The increase in the height of the acrylic promotes a greater inhibition of the forward displacement of the nasal spine and reduction in the facial growth index. The increase in the mandibular advancement induces more downward displacement of nasal spine and pogonion; a counter-clockwise rotation of palatine plane; an increase in mandibular length, maxillary alveolar height and interincisal angle; a decrease in mandibular alveolar height, the intermaxillary discrepancy and overjet; and palatal tipping of upper incisors. Conclusions: The different dimensions of the construction bite influence the dentoskeletal changes induced by the appliance in Class II treatment.

Simulation of the flow through automatic valves of hermetic compressors by the immersed boundary method approach

The main goal of the present work is to verify the applicability of the Immersed Boundary Method together with the Virtual Physical Model to solve the flow through automatic valves of hermetic compressors. The valve was simplified to a two-dimensional radial diffuser, with diameter ratio of D/d = 1.5, and simulated for a one cycle of opening and closing process with a imposed velocity of 3.0 cm/s for the reed, dimensionless gap between disks in the range of 0.07 < s/d < 0.10, and inlet Reynolds number equal to 1500. The good results obtained showed that the methodology has great potential as project tool for this type of valve systems. © The Authors, 2011.

Introduction of a non-conventional solution for Amazon transmission system: Analysis of the electric aspects

This article shows an analysis of the longitudinal electric parameters of a three-phase transmission line/section using a 280-meter high steel tower. This characteristic, the height of the line conductors and distance between them, are intrinsic related to the longitudinal and transversal parameters of the line. By this means, an accurate study was carried out in order to show the electric variations between a transmission line using the new technology and a three-phase conventional 440 kV line for a wide range of frequencies and a variable soil resistivity. In addition, by using a digital line model, simulations are carried out in time domain to analyze critical overvoltage transients on the studied line. © 2011 IEEE.

The reproductive cycle of the male sleep snake Sibynomorphus mikanii (Schlegel, 1837) from southeastern brazil

This study describes the male reproductive cycle of Sibynomorphus mikanii from southeastern Brazil considering macroscopic and microscopic variables. Spermatogenesis occurs during spring-summer (September-December) and spermiogenesis or maturation occurs in summer (December-February). The length and width of the kidney, the tubular diameter, and the epithelium height of the sexual segment of the kidney (SSK) are larger in summer-autumn (December-May). Histochemical reaction of the SSK [periodic acid-Schiff (PAS) and bromophenol blue (BB)] shows stronger results during summer-autumn, indicating an increase in the secretory activity of the granules. Testicular regression is observed in autumn and early winter (March-June) when a peak in the width of the ductus deferens occurs. The distal ductus deferens as well as the ampulla ductus deferentis exhibit secretory activities with positive reaction for PAS and BB. These results suggest that this secretion may nourish the spermatozoa while they are being stored in the ductus deferens. The increase in the Leydig cell nuclear diameter in association with SSK hypertrophy and the presence of sperm in the female indicate that the mating season occurs in autumn when testes begin to decrease their activity. The peak activity of Leydig cells and SSK exhibits an associated pattern with the mating season. However, spermatogenesis is dissociated of the copulation characterizing a complex reproductive cycle. At the individual level, S. mikanii males present a continuous cyclical reproductive pattern in the testes and kidneys (SSK), whereas at the populational level the reproductive pattern may be classified as seasonal semisynchronous. © 2012 Wiley Periodicals, Inc.

Energetic, ecologic and fluid-dynamic analysis of a fluidized bed gasifier operating with sugar cane bagasse

This work aims to study the thermodynamic, ecological and fluid-dynamic aspects of a circulating fluidized bed gasifier using sugar cane bagasse as biomass, in order to estimate a model of its normal operation. In the initial stage was analysed the composition of biomass selected (sugar cane bagasse) and its lower heating value (LHV) was calculated. The energy balance of the gasifier was done, being the volumetric flow of air, synthesis gas and biomass estimated. Also the power produced by this gasifier was theoretically estimated. Then the circulating fluidized bed gasifier was designed for operation with approximately 100 kg/h of processed biomass. Cross-sectional area of the reactor, feeder size, diameter of the exit zone of the gases and minimum height of the expanded bed were selected. Some bed gasifier hydrodynamic factors were also studied. The minimum fluidization velocity, fluidization terminal velocity, and average fluidizing velocity were calculated, in order to understand the fluid-dynamic behaviour of gasification of this fuel. It was obtained a theoretical model that can support a possible prototype of circulating fluidized bed gasifier biomass. Finally, there were studied the ecological aspects of the gasifier, through an overall methodology. Ecological efficiencies were estimated for two scenarios: first considering the carbon cycle and thereafter disregarding the carbon cycle. In both cases, it can be proved the ecological viability of the project. © 2013 Elsevier Ltd. All rights reserved.