The Influence of Aspect on the Biological Colonization of Stone in Northern Ireland.

The rate and type of biological colonization of stone is influenced by a wide array of environmental factors in addition to substrate characteristics. A series of experiments was designed to compare the rate and type of biological colonization of stone at varying locations over a 21-month time period. Exposure
trials were set up at nine different sites across Northern Ireland that covered a wide variety of environmental conditions. To determine aspect-related differences in colonization, blocks of Peakmoor sandstone and Portland limestone were placed on the north- and south-facing sides of purpose-designed exposure racks. Colorimetry and visual analysis were carried out on collected samples at increasing time intervals. Results showed significantly different rates of darkening and greening over time between north-facing and south-facing blocks, for both sandstone and limestone. This difference is likely to be representative of the fact that in Northern Ireland’s wet climate and northern-latitude position, the north face of a building will receive less direct sunlight. Therefore north-facing blocks, once wet, will remain damp for much longer than blocks on other façades. This slow-drying phenomenon is much more hospitable for biological colonization and continued growth than the hostile environment of rapid wetting and drying cycles experienced on the south face.

Impact of Age on the Importance of Systolic and Diastolic Blood Pressures for Stroke Risk:The MOnica, Risk, Genetics, Archiving, and Monograph (MORGAM) Project

This study investigates age-related shifts in the relative importance of systolic (SBP) and diastolic (DBP) blood pressures as predictors of stroke and whether these relations are influenced by other cardiovascular risk factors. Using 34 European cohorts from the MOnica, Risk, Genetics, Archiving, and Monograph (MORGAM) Project with baseline between 1982 and 1997, 68 551 subjects aged 19 to 78 years, without cardiovascular disease and not receiving antihypertensive treatment, were included. During a mean of 13.2 years of follow-up, stroke incidence was 2.8%. Stroke risk was analyzed using hazard ratios per 10-mm Hg/5-mm Hg increase in SBP/DBP by multivariate-adjusted Cox regressions, including SBP and DBP simultaneously. Because of nonlinearity, DBP was analyzed separately for DBP =71 mm Hg and DBP

Stable isotope probing analysis of the influence of liming on root exudate utilization by soil microorganisms

Rhizosphere microorganisms play an important role in soil carbon flow, through turnover of root exudates, but there is little information on which organisms are actively involved or on the influence of environmental conditions on active communities. In this study, a (CO2)-C-13 pulse labelling field experiment was performed in an upland grassland soil, followed by RNA-stable isotope probing (SIP) analysis, to determine the effect of liming on the structure of the rhizosphere microbial community metabolizing root exudates. The lower limit of detection for SIP was determined in soil samples inoculated with a range of concentrations of C-13-labelled Pseudomonas fluorescens and was found to lie between 10(5) and 10(6) cells per gram of soil. The technique was capable of detecting microbial communities actively assimilating root exudates derived from recent photo-assimilate in the field. Denaturing gradient gel electrophoresis (DGGE) profiles of bacteria, archaea and fungi derived from fractions obtained from caesium trifluoroacetate (CsTFA) density gradient ultracentrifugation indicated that active communities in limed soils were more complex than those in unlimed soils and were more active in utilization of recently exuded C-13 compounds. In limed soils, the majority of the community detected by standard RNA-DGGE analysis appeared to be utilizing root exudates. In unlimed soils, DGGE profiles from C-12 and C-13 RNA fractions differed, suggesting that a proportion of the active community was utilizing other sources of organic carbon. These differences may reflect differences in the amount of root exudation under the different conditions.

The influence of culture on home-based family caregiving at end-of-life: A case study of Dutch reformed family care givers in Ontario, Canada

Families are facing increased pressure to provide care to their terminally-ill or dying kin in the home. It is known that balancing care with other personal and social roles can adversely affect family caregivers' (FCGs) health, yet access to supportive services which can mitigate burden is often inadequate. Cultural factors are known to shape the experience of caregiving; however, most research to date tends to neglect the experiences of FCGs from different cultural groups. This understanding is necessary to ensure that supportive services are both meaningful and culturally-appropriate. Using qualitative methods, we undertook longitudinal research with a sample of Dutch Reformed FCGs (n = 5) to understand their experiences of caregiving and bereavement. The results of the study are suggestive of a cultural specificity with respect to caregiving that impacts both responsibilities and reactions to care. Three themes were salient to this group as a cultural entity: cultural attitudes towards care, religious beliefs and coping, and c. ulturally-informed care-seeking behaviours. These three themes were seen to be a function of their religious and ethnic identities and were reinforced by ties to the communities in which they resided. Cultural identity provided a framework through which to understand and make sense of the experience, while group membership provided access to networks of informal support. This research contributes to the geographical literature on care/caregiving by providing insight into the social, cultural and religious context of informal family caregiving with a population who live in close geographic proximity. On a practical level, this case study indicates the importance of considering how these factors may operate in other settings in order to implement timely and appropriate interventions to better support FCGs who are caring for their terminally-ill loved-ones at home.

Influence of microstructure on the cutting behaviour of silicon

We use molecular dynamics simulation to study the mechanisms of plasticity during cutting of monocrystalline and polycrystalline silicon. Three scenarios are considered: (i) cutting a single crystal silicon workpiece with a single crystal diamond tool, (ii) cutting a polysilicon workpiece with a single crystal diamond tool, and (iii) cutting a single crystal silicon workpiece with a polycrystalline diamond tool. A long-range analytical bond order potential is used in the simulations, providing a more accurate picture of the atomic-scale mechanisms of brittle fracture, ductile plasticity, and structural changes in silicon. The MD simulation results show a unique phenomenon of brittle cracking typically inclined at an angle of 45° to 55° to the cut surface, leading to the formation of periodic arrays of nanogrooves in monocrystalline silicon, which is a new insight into previously published results. Furthermore, during cutting, silicon is found to undergo solid-state directional amorphisation without prior Si-I to Si-II (beta tin) transformation, which is in direct contrast to many previously published MD studies on this topic. Our simulations also predict that the propensity for amorphisation is significantly higher in single crystal silicon than in polysilicon, signifying that grain boundaries eases the material removal process.

Influence of nanoclays on mechanical and barrier properties of hydrogenated acrylonitrile butadiene rubber nanocomposites

In this research, two different methods have been investigated for optimising the preparation of hydrogenated acrylonitrile butadiene rubber/clay nanocomposites. Commercially available organoclay (Cloisite 20A) has been considered for the preparation of rubber nanocomposites. A detailed analysis has been made to investigate the morphological structure and mechanical behaviour at room temperature and at elevated temperature. Also the influence of organoclays on permeability has been studied. Structural analysis indicates very good dispersion for a low loading of 5 parts per hundred (phr) amount of nanoclays. Significant improvements in mechanical properties have been observed with the addition of organoclays at both room and elevated temperatures. Even with the low level of addition of nanoclays, there was a remarkable reduction in permeability. © Institute of Materials, Minerals and Mining 2011.

The influence of inequality on the standard of living: Worldwide anthropometric evidence from the 19th and 20th centuries

We provide empirical evidence on the existence of the Pigou–Dalton principle. The latter indicates that aggregate welfare is – ceteris paribus – maximized when incomes of all individuals are equalized (and therefore marginal utility from income is as well). Using anthropometric panel data on 101 countries during the 19th and 20th centuries, we determine that there is a systematic negative and concave relationship between height inequality and average height. The robustness of this relationship is tested by means of several robustness checks, including two instrument variable regressions. These findings help to elucidate the impact of economic inequality on welfare.

Urban/rural variation in the influence of widowhood on mortality risk: a cohort study of almost 300,000 couples

Death of a spouse is associated with increased mortality risk for the surviving partner (the widowhood effect). We investigated whether the effect magnitude varied between urban, rural and intermediate areas, assembling death records (2001-2009) for a prospective cohort of 296,125 married couples in Northern Ireland. The effect was greatest during the first six months of widowhood in all areas and for both sexes. Subsequently, the effect was attenuated among men in rural and intermediate areas but persisted in urban areas (HRs and 95% CIs: rural 1.09 [0.99, 1.21]; urban 1.35 [1.26, 1.44]). Among women the effect was attenuated in all areas (rural 1.06 [0.96, 1.17]; urban 1.09 [1.01, 1.17]). The impacts of spousal bereavement varied between urban and more rural areas, possibly due to variation in social support provided by the wider community. We identify men in urban areas as being in greatest need of such support and a possible target for health interventions.

The influence of comorbidity on the risk of access-related bacteremia in chronic hemodialysis patients.

Access-related bacteremia is an important cause of morbidity in chronic hemodialysis patients. The incidence of bacteremia is higher in patients dialyzing through a tunneled central venous catheter (TCVC) compared with an arteriovenous fistula (AVF). Our aim was to explore if this is explained by patient comorbidity. Two groups of chronic hemodialysis outpatients were compared: all patients who dialyzed through a TCVC at any time during 2003 and were fit enough to subsequently have a functioning AVF or renal transplant even if it was after 2003 (Group 1; n=93); and all patients who dialyzed through a TCVC in 2003 and were not fit enough to have a functioning AVF or renal transplant (Group 2; n=119). Episodes of bacteremia (n=71) were identified and those not related to access were excluded. Patients in Group 1 were younger than Group 2 (57.5 years vs. 64.8 years; P=0.001). The incidences of bacteremia in Groups 1 and 2 were, respectively, 0.31 and 0.44 episodes per 1000 patient days while dialyzing through an AVF (P=0.77), and 2.21 and 2.27 per 1000 days while dialyzing through a TCVC (P=0.91). The 3-year actual survival from January 1, 2003 to January 1, 2006 was significantly higher in Group 1 than in Group 2 (80.6% vs. 26.1%; P<0.0001) confirming the higher comorbidity of the patients in Group 2. Patients dialyzing through a TCVC (compared with an AVF) have a significantly higher risk of access-related bacteremia, irrespective of comorbidity.

Influence of rheology on the quality of surface finish of cement-based mortars

Aesthetics of concrete structures is directly related to the quality of their surface finish. The objective of this investigation was to examine the effect of rheological properties of cement-based mortars on the quality of their surface finish. The study was divided into two phases. Firstly, the influence of the mix composition of mortars, viz. the water to cement (w/c) ratio, the sand content and the superplasticiser (SP) dosage on their rheology was evaluated. Secondly, the surface finish quality was characterised and related to the rheology of the studied systems. Rheology of these materials, i.e. the yield value, was measured using a vane viscometer. The quality of the surface finish was assessed by quantification of the surface air voids by analysing digital photographs of the mould finished sample surfaces. It was found that an increase in the w/c ratio and the SP content decreased the yield value, whilst the increase in the sand content had an opposite effect. When the surface quality is concerned, an increase in the yield value was found to increase the total content of the surface air voids and especially those with size smaller than 1 mm in diameter. Moreover, the analysis of the location of the surface air voids along the height of the sample revealed that with the increase in the yield value their concentration was higher in the bottom section of the analysed samples.

Influence of temperature on the anisotropic cutting behaviour of single crystal silicon: A molecular dynamics simulation investigation

Using molecular dynamics (MD) simulation, this paper investigates anisotropic cutting behaviour of single crystal silicon in vacuum under a wide range of substrate temperatures (300 K, 500 K, 750 K, 850 K, 1173 K and 1500 K). Specific cutting energy, force ratio, stress in the cutting zone and cutting temperature were the indicators used to quantify the differences in the cutting behaviour of silicon. A key observation was that the specific cutting energy required to cut the (111) surface of silicon and the von Mises stress to yield the silicon reduces by 25% and 32%, respectively, at 1173 K compared to what is required at 300 K. The room temperature cutting anisotropy in the von Mises stress and the room temperature cutting anisotropy in the specific cutting energy (work done by the tool in removing unit volume of material) were obtained as 12% and 16% respectively. It was observed that this changes to 20% and 40%, respectively, when cutting was performed at 1500 K, signifying a very strong correlation between the anisotropy observed during cutting and the machining temperature. Furthermore, using the atomic strain criterion, the width of primary shear zone was found to vary with the orientation of workpiece surface and temperature i.e. it remains narrower while cutting the (111) surface of silicon or at higher machining temperatures. A major anecdote of the study based on the potential function employed in the study is that, irrespective of the cutting plane or the cutting temperature, the state of the cutting edge of the diamond tool did not show direct diamond to graphitic phase transformation.

Influence of phosphate on the arsenic uptake by wheat (Triticum durum L.) irrigated with arsenic solutions at three different concentrations

In this study we have investigated the uptake and distribution of arsenic (As) and phosphate (P_i) in roots, shoots, and grain of wheat grown in an uncontaminated soil irrigated with solutions containing As at three different concentrations (0.5, 1 and 2 mg l^-1) and in the presence or in the absence of P fertilization. Arsenic in irrigation water reduced plants growth and decreased grain yield. When P_i was not added (P-), plants were more greatly impacted compared to the plus P_i (P+) treatments. The differences in mean biomass between P- and P+ treatments at the higher As concentrations demonstrated the role of P_i in preventing As toxicity and growth inhibition. Arsenic concentrations in root, shoot and grain increased with increasing As concentration in irrigation water. It appears that P fertilization minimizes the translocation of As to the shoots and grain whilst enhancing P status of plant. The observation that P fertilization minimises the translocation of arsenic to the shoots and grain is interesting and may be useful for certain regions of the world that has high levels of As in groundwater or soils. © 2008 Springer Science+Business Media B.V.

Urban/rural variation in the influence of widowhood on mortality risk

Death of a spouse is associated with increased mortality risk for the surviving partner (the widowhood effect), although the mechanisms driving the effect are poorly understood. After acute stress and grief have dissipated, mortality risk may be increased by loss of emotional and instrumental support for daily living and so we investigated whether social support at both the household and community levels moderated the influence of spousal bereavement on mortality risk.

We assembled death records from the Northern Ireland Mortality Study spanning almost nine years for a prospective cohort of 296,125 married couples enumerated in the 2001 Census. Presence of other adults within the household and urban/rural residence were used as measures of support at the household and community levels, with informal social support perceived to be strongest in rural areas. We used Cox proportional hazards models to estimate the effects of widowhood, sex, household composition and urban/intermediate/rural residence on all-cause mortality.

Elevated mortality risk during the first six months of widowhood was found in all areas and for both sexes (range of hazard ratios 1.24, 1.57). After more than six months the effect among men was attenuated in rural but not urban areas (HRs and 95%CIs 1.09 [0.99, 1.21] and 1.35 [1.26, 1.44] respectively). Among women the effect was attenuated in both rural and urban areas (HRs 1.06 [0.96, 1.17] and 1.09 [1.01, 1.17]). Mortality risk post bereavement was not associated with presence of other adults in the household.

We found some support for the hypothesis that informal social support is beneficial for reducing the impacts of spousal loss. Rural residence had a positive effect especially among men but presence of other adults in the household had no effect. The reasons for this discrepancy require further investigation and we identify men in urban areas as being at greatest risk in the long term.

Influence of testing on permeability of compacted fine soils

The British standard constant-head triaxial test for measuring the permeability of fine-grained soils takes a relatively long time. A quicker test could provide savings to the construction industry, particularly for checking the quality of landfill clay liners. An accelerated permeability test has been developed, but the method often underestimates the permeability values compared owing to structural changes in the soil sample. This paper reports on an investigation
into the accelerated test to discover if the changes can be limited by using a revised procedure. The accelerated test is assessed and compared with the standard test and a ramp-accelerated permeability test. Four different finegrained materials are compacted at various water contents to produce analogous samples for testing using the three different methods. Fabric analysis is carried out on specimens derived from post-test samples using mercury intrusion porosimetry and scanning electron microscopy to assess the effects of testing on soil structure. The results show that accelerated testing in general underestimates permeability compared with values derived from the standard test, owing to changes in soil structure caused by testing. The ramp-accelerated test is shown to provide an improvement in terms of these structural changes.