Dibenzyl trithiocarbonate mediated reversible addition-fragmentation chain transfer polymerization of acrylonitrile

Reversible addition-fragmentation chain transfer polymerization has been successfully applied to polymerize acrylonitrile with dibenzyl trithiocarbonate as the chain-transfer agent. The key to success is ascribed to the improvement of the interchange frequency between dormant and active species through the reduction of the activation energy for the fragmentation of the intermediate. The influence of several experimental parameters, such as the molar ratio of the chain-transfer agent to the initiator [azobis(isobutyronitrile)], the molar ratio of the monomer to the chain-transfer agent, and the monomer concentration, on the polymerization kinetics and the molecular weight as well as the polydispersity has been investigated in detail. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and H-1 NMR analyses have confirmed the chain-end functionality of the resultant polymer.

An one-pot epitaxial growth method to synthesize cactus-like ZnO

In this work, we have developed a one-pot, morphology controlled epitaxial growth method to synthesize novel cactus-like ZnO in solution. Utilizing zinc acetate and hexamethylenetetramine as the precursors, ZnO nanorods synthesized in the first step remained in the solution, without any separation, served directly as the matrix for the epitaxial growth in the second step. Control experiments revealed that a proper mass of precursors added in the second step was crucial to form cactus-like ZnO. The as-synthesized ZnO was single crystalline and possessed three photoluminescence emissions centered at 390, 425 and 490 run. Finally, a possible mechanism for the epitaxial growth ZnO was proposed and discussed.

Promoter effects of rare earth ions on electrocatalytic oxidation of methanol

The promoter effects of rare earth ions on the electrocatalytic oxidation of methanol at the Pt electrode were studied using the cyclic voltammetry and stable polarization techniques. It was found for the first time that Eu, Ho, Dy ions could accelerate the electrocatalytic oxidation of methanol at the Pt electrode, while Lu, Pr, Yb, Sm ions showed inhibitor effects.

Synthesis, crystal structure and reactivity of (2,4-C7H11)(2)Yb center dot DME

(2,4-C7H11)(2)Yb . DME was synthesized by the reaction of YbCl3 with K(2,4-C7H11)(2,4-dimethylpentadienyl potassium), and the single crystal X-ray diffraction showed that the complex exists in a cis- staggered conformation. Thf crystal of the compound belongs to the monoclinic space group P2(1)/n with a = 0.675 2 (1) nm, b = 1.490 6 (1) nm, c = 1.529 3 (2) nm, beta = 97.55 (2)degrees, V = 1.977 79 (4) nm(3), Z = 4, F(000) = 735.8 e, mu = 49.49 cm(-1), R = 0.033 and R-w = 0.032. The title complex can be used as a catalyst for the polymerization of methyl methacrylate (MMA).

Effect of lanthanum ions on tRNA(Phe) structure: Imino proton NMR spectroscopy

The effect of lanthanum ions on the structural and conformational change of yeast tRNA(Phe) was studied by H-1 NMR. The results suggest that the tertiary base pair (G-15)(C-48), which was located in the terminal in the augmented dihydrouridine helix (D-helix), was markedly affected by adding La3+ and shifted 0.33 downfield. Based pair (U-8)(A-14), which is associated with a tertiary interaction, links the base of the acceptor stem to the D-stem and anchors the elbow of the L structure, shifted 0.20 upfield. Another imino proton that may be affected by La3+ in tRNA(Phe) is the tertiary base pair (G-19)(C-56). The assignment of this resonance is tentative since it is located in the region of highly overlapping resonances between 12.6 and 12.2. This base pair helps to anchor the D-loop to the T psi C loop.

The synthesis and thermotropic liquid crystalline behavior of the novel poly(aryl ether ketone)s containing chloro-side group

The novel poly(aryl ether ketone)s containing chloro-side group were synthesized by nucleophilic substitution reactions of 4,4'-biphenol and chlorohydroquinone with either 4,4'-difluorobenzophenone(BP/CH/DF) or 1,4-bis(p-fluorobenzoyl)benzene (BP/CH/BF) and their thermotropic liquid crystalline properties were characterized by a variety of experimental techniques. The thermotropic liquid crystalline behavior was observed in the copolymers containing 50 and 70% biphenol. Melting transition (Tm) and isotropization transition (Ti) both appeared in the DSC thermograms. A banded texture was formed after shearing the sample in the liquid crystalline state. The novel poly(aryl ether ketone)s had relatively higher glass transition temperature (Tg) in the range of 168 similar to 200 degrees C and lower melting temperature (Tm) in the range of 290 similar to 340 degrees C. The thermal stability (Td) was in the range of 430 similar to 490 degrees C.

Impedance spectrum measurement in liquid/liquid interface electrochemistry .2. Study on the ion transfer at L/L interface by impedance spectrum technique

In this paper we study the ion transfer across the liquid/liquid interface by impedance spectrum technique in the four - electrode system. We present a method of getting the real interfacial impedance curve from the apparent impedance curve obtained in the four - electrode system. A practical kinetics investigation on the transfer of tetramethylammonium ion at the water/nitrobenzene interface was done with the method to verify the validity of the method. The transfer of tetramethylammonium ion at the W/O interface is really a reversible transfer.

紫外光谱法测定杂多酸的酸强度

本文系统考察了以紫外光谱配合Ｈａｍｍｅｔｔ指示剂测定杂多酸酸强度的测定条件，选择出合适的指示剂和溶剂，并测定了Ｈ_４ＳｉＭｏｎＷ_（１２－ｎ）Ｏ_（４０）·ｘＨ_２Ｏ、Ｈ_３ＰＭｏｎＷ_（１２－ｎ）Ｏ_（４０）·ｘＨ_２Ｏ（ｎ＝０、２、４、６、８、１０、１２，ｘ＝１６～２５）两系列杂多酸在乙腈溶液中的酸强度，测定结果表明，改变杂多酸中钼和钨的配比，对其酸强度无明显影响。

液/液界面的电化学阻抗谱测量 Ⅱ.液/液界面上离子传递的研究

本文成功地运用四电极系统阻抗谱技术来研究液/液界面上的离子传递.提出了从表观阻抗曲线获取真实界面阻抗曲线的方法.并用此方法对四甲铵离子在水/硝基苯界面上的传递进行了实际的动力学研究,证实了四甲铵离子在水/硝基苯界面上的传递是可逆离子传递

SYNTHESES AND CRYSTAL-STRUCTURES OF (C8H8)ND(C5H9C5H4)(THF)(2) AND [(C8H8)GD(C5H9C4H4(THF)][(C8H8)GD(C5H9C5H4(THF)(2)]

LnCl(3) (Ln = Nd, Gd) reacts with C5H9C5H4Na (or K2C8H8) in THF (C5H9C5H4 = cyclopentylcyclopentadienyl) in the ratio of 1:1 to give (C5H9C5H4)LnCl(2)(THF)(n) (or (C8H8)LnCl(2)(THF)(n)], which further reacts with K2C8H8 (or C5H9C5H4Na) in THF to form the title complexes. If Ln = Nd the complex (C8H8)Nd(C5H9C5H4)(THF)(2) (a) was obtained: when Ln = Gd the 1:1 complex [(C8H8)Gd(C5H9C5H4)(THF)][(C5H8)Gd(C5H9C5H4)(THF)(2)] (b) was obtained in crystalline form. The crystal structure analysis shows that in (C8H8)Ln(C5H9C5H4)(THF)(2) (Ln = Nd or Gd), the Cyclopentylcyclopentadienyl (eta(5)), cyclooctatetraenyl (eta(8)) and two oxygen atoms from THF are coordinated to Nd3+ (or Gd3+) with coordination number 10. The centroid of the cyclopentadienyl ring (Cp') in C5H9C5H4 group, cyclooctatetraenyl centroid (COT) and two oxygens (THF) form a twisted tetrahedron around Nd3+ (or Gd3+). In (C8H8)Gd(C5H9C5H4)(THF), the cyclopentyl-cyclopentadienyl (eta(5)), cyclooctatetraenyl (eta(8)) and one oxygen atom are coordinated to Gd3+ with the coordination number of 9 and Cp', COT and oxygen atom form a triangular plane around Gd3+, which is almost in the plane (dev. - 0.0144 Angstrom).

[Cp_2ErCl(THF)]_2的晶体结构

本文报导了(Cp_2ErCl(THF)]_2的晶体结构,晶体属单斜晶系,P2_1/c空间群。晶胞参数为a=8.141(2),b=21.218(6),c=8.597(2),β=107.77(2)°;V=1414.1(6) ~3;Z=2,D_c=1.90g/cm~3,F(000)=780,μ_c=66.3cm~(-1)(MoK_a)。最终的偏离因子R=0.047,R_(to)=0.048。结构分析表明,该配合物是以两个氯离子与金属离子桥联的二聚体形式存在。四氢呋喃中的氧原子同金属离子键合,Er—O键长为2.490(6),两个环戊二烯中的所有碳原子同金属离子间的平均键长为2.649,Er-Cl=2.666(3),Er—Cl-a=2.797(3),Er-Er_a=4.42,Cl-Er-Cl_a键角为72.2°。

有机试液的电感耦合等离子体原子发射光谱分析 Ⅱ.有机溶剂对ICP放电特性的影响

从放电稳定性、激发特性、辐射特性及分析特性几方面,讨论了“有机 ICP”的若干基本问题及其研究进展。

钼系1,2-聚丁二烯橡胶扩大试验

以钼系化合物为主催化剂,有机铝为助催化剂,烯丙基溴为分子量调节剂,加氢汽油为溶剂,在30 L连续聚合装置上进行了 1,2-聚丁二烯橡胶合成试验。首釜聚台温度 60—80℃,2~#、3~# 釜聚合温度70—80℃。胶液用热水凝聚,湿胶经螺杆挤压机脱水干燥。所得产品性能为:[η]=2.08—2.77dL/g,ML_(1+4)100℃=57—69,分子量分散指数1.3—2.2,1,2-链节含量为 81.4—90％。聚合经 1 500 h连续运转,无挂胶和凝胶。同时对产品的充油及其与 BR、NR共混进行了试验。