10Be data for sediments from DSDP Leg 56 and ODP Leg 170

Sediment accretion and subduction at convergent margins play an important role in the nature of hazardous interplate seismicity (the seismogenic zone) and the subduction recycling of volatiles and continentally derived materials to the Earth's mantle. Identifying and quantifying sediment accretion, essential for a complete mass balance across the margin, can be difficult. Seismic images do not define the processes by which a prism was built, and cored sediments may show disturbed magnetostratigraphy and sparse biostratigraphy. This contribution reports the first use of cosmogenic 10Be depth profiles to define the origin and structural evolution of forearc sedimentary prisms. Biostratigraphy and 10Be model ages generally are in good agreement for sediments drilled at Deep Sea Drilling Project Site 434 in the Japan forearc, and support an origin by imbricate thrusting for the upper section. Forearc sediments from Ocean Drilling Program Site 1040 in Costa Rica lack good fossil or paleomagnetic age control above the decollement. Low and homogeneous 10Be concentrations show that the prism sediments are older than 3-4 Ma, and that the prism is either a paleoaccretionary prism or it formed largely from slump deposits of apron sediments. Low 10Be in Costa Rican lavas and the absence of frontal accretion imply deeper sediment underplating or subduction erosion.

Revisiting the Classics to recover the Physical Sense in electrical noise

This paper shows a physically cogent model for electrical noise in resistors that has been obtained from Thermodynamical reasons. This new model derived from the works of Johnson and Nyquist also agrees with the Quantum model for noisy systems handled by Callen and Welton in 1951, thus unifying these two Physical viewpoints. This new model is a Complex or 2-D noise model based on an Admittance that considers both Fluctuation and Dissipation of electrical energy to excel the Real or 1-D model in use that only considers Dissipation. By the two orthogonal currents linked with a common voltage noise by an Admittance function, the new model is shown in frequency domain. Its use in time domain allows to see the pitfall behind a paradox of Statistical Mechanics about systems considered as energy-conserving and deterministic on the microscale that are dissipative and unpredictable on the macroscale and also shows how to use properly the Fluctuation-Dissipation Theorem.

Definición de un nuevo modelo de negocio sostenible y aplicable a la nueva realidad de negocios y social para la convergencia de operadores de telecomunicación e Internet

La presente tesis analiza la integración del sector de las telecomunicaciones con los de TI y medios que conforman el actual hiper-sector de las TIC, para abordar una propuesta de valor que se plantea a dos niveles. Se expone de un lado, la iniciativa WIMS 2.0, que aborda los aspectos tecnológicos y estratégicos de la convergencia telco e Internet para, posteriormente, definir un nuevo modelo de negocio, que adaptado al nuevo sector integrado y siguiendo paradigmas inéditos como los que plantea la innovación abierta, permita generar nuevos flujos de ingresos en áreas no habituales para los operadores de telecomunicaciones. A lo largo del capítulo 2, el lector encontrará la contextualización del entorno de las comunicaciones de banda ancha desde tres vertientes: los aspectos tecnológicos, los económicos y el mercado actual, todo ello enfocado en una dimensión nacional, europea y mundial. Se establece de esta manera las bases para el desarrollo de los siguientes capítulos al demostrar cómo la penetración de la banda ancha ha potenciado el desarrollo de un nuevo sistema de valor en el sector integrado de las TIC, alrededor del cual surgen propuestas de modelos de negocio originales que se catalogan en una taxonomía propia. En el tercer capítulo se detalla la propuesta de valor de la iniciativa WIMS 2.0, fundada y liderada por el autor de esta tesis. WIMS 2.0, como iniciativa abierta, se dirige a la comunidad como una propuesta de un nuevo ecosistema y como un modelo de referencia integrado sobre el que desplegar servicios convergentes. Adicionalmente, sobre el planteamiento teórico definido se aporta el enfoque práctico que supone el despliegue del modelo de referencia dentro de la arquitectura de un operador como Telefónica. El capítulo 4 muestra el modelo de negocio Innovación 2.0, basado en la innovación abierta con el objetivo de capturar nuevos flujos de ingresos incrementando el portfolio de servicios innovadores gracias a las ideas frescas y brillantes de start-ups. Innovación 2.0 lejos de quedarse en una mera propuesta teórica, muestra sus bondades en el éxito práctico en el mercado que ha validado las hipótesis planteadas. El último capítulo plantea las líneas futuras de investigación tanto en el ámbito de la iniciativa WIMS 2.0 como en el modelo de Innovación 2.0, algunas de las cuales se están comenzando a abordar. 3 Abstract This thesis examines the integration of telecommunications sector with IT and media that make up the current hyper-ICT sector, to address a value proposition that arises at two levels. On one side, WIMS 2.0 initiative, which addresses the technological and strategic aspects of the telco and Internet convergence to later define a new business model, adapted to the new integrated sector and following original paradigms such as those posed by open innovation, which generates new revenue streams in areas not typical for telecom operators. Throughout Chapter 2, the reader will find the contextualization of the broadband communications environment from three aspects: technological, economic and the current market all focused on a national, European and world scale. Thus it establishes the basis for the development of the following chapters by demonstrating how the penetration of broadband has led to the development of a new value system in the integrated sector of the ICT, around which arise proposals of originals business models, which are categorized in a own taxonomy. The third chapter outlines the value proposition of the WIMS 2.0 initiative, founded and led by the author of this thesis. WIMS 2.0, as open initiative, presents to the community a proposal for a new ecosystem and an integrated reference model on which to deploy converged services. Additionally, above the theoretical approach defined, WIMS 2.0 provides the practical approach is provided which is the deployment of the reference model into the architecture of an operator such as Telefónica. Chapter 4 shows the Innovation 2.0 business model, based on open innovation with the goal of capturing new revenue streams by increasing the portfolio of innovative services thanks to the fresh and brilliant ideas from start-ups. Innovation 2.0, far from being a mere theoretical proposition, shows its benefits in the successful deployment in the market, which has validated the hypotheses. The last chapter sets out the future research at both the WIMS 2.0 initiative and Innovation 2.0 model, some of which are beginning to be addressed.

Experimental study on the effective width of flat slab structures under dynamic seismic loading

This paper investigates the effective width of reinforced concrete flat slab structures subjected to seismic loading on the basis of dynamic shaking table tests. The study is focussed on the behavior of corner slab? column connections with structural steel I- or channel-shaped sections (shearheads) as shear punching reinforcement. To this end, a 1/2 scale test model consisting of a flat slab supported on four box-type steel columns was subjected to several seismic simulations of increasing intensity. It is found from the test results that the effective width tends to increase with the intensity of the seismic simulation, and this increase is limited by the degradation of adherence between reinforcing steel and concrete induced by the strain reversals caused by the earthquake. Also, significant differences are found between the effective width obtained from the tests and the values predicted by formula proposed in the literature. These differences are attributed to the stiffening effect provided by the steel profiles that constitute the punching shear reinforcement.

A shake table test of typical mediterranean reinforced concrete structures

This research investigates the ultimate earthquake resistance of typical RC moment resisting frames designed accordingly to current standards, in terms of ultimate energy absorption/dissipation capacity. Shake table test of a 2/5 scale model, under several intensities of ground motion, are carried out. The loading effect of the earthquake is expressed as the total energy that the quake inputs to the structure, and the seismic resistance is interpreted as the amount of energy that the structure dissipates in terms of cumulative inelastic strain energy.

Applied continuous modelling in the study of pyrotechnic shock propagation on Ariane 5

This paper deals with the theoretical method and the modelling problems on the analysis of the Pyrotechnic Shock Propagation in the Vehicle Equipment Bay Structure of the ARIANE 5 during the separation of the upper stage. This work has been developed under a contract with the Spanish Firm Construcciones Aeronáuticas S.A. From all the analysis and the studies it can be concluded that: 1.- The mathematical method used for the study of the pyrotechnic shock phenomena is very well suited for conducting parametric studies. 2.- A careful model of the structure should be developed taking into account the realistic stiffness and dissipation properties at the junctions. 3.- The load produced by the pyrotechnic device should be carefully calibrated to reach a good agreement between theoretical and test results. 4.- In any case with the adquired experience it can be said that with the modelling of continuous elements the order of magnitude of the accelerations can be predicted with the accuracy needed in practical applications.

Mathematical Analysis of the Effect of Rotor Geometry on Cup Anemometer Response

The calibration coefficients of two commercial anemometers equipped with different rotors were studied. The rotor cups had the same conical shape, while the size and distance to the rotation axis varied.The analysis was based on the 2-cup positions analytical model, derived using perturbation methods to include second-order effects such as pressure distribution along the rotating cups and friction.Thecomparison with the experimental data indicates a nonuniformdistribution of aerodynamic forces on the rotating cups, with higher forces closer to the rotating axis. The 2-cup analytical model is proven to be accurate enough to study the effect of complex forces on cup anemometer performance.

BIND—The Biomolecular Interaction Network Database

The Biomolecular Interaction Network Database (BIND; http://binddb.org) is a database designed to store full descriptions of interactions, molecular complexes and pathways. Development of the BIND 2.0 data model has led to the incorporation of virtually all components of molecular mechanisms including interactions between any two molecules composed of proteins, nucleic acids and small molecules. Chemical reactions, photochemical activation and conformational changes can also be described. Everything from small molecule biochemistry to signal transduction is abstracted in such a way that graph theory methods may be applied for data mining. The database can be used to study networks of interactions, to map pathways across taxonomic branches and to generate information for kinetic simulations. BIND anticipates the coming large influx of interaction information from high-throughput proteomics efforts including detailed information about post-translational modifications from mass spectrometry. Version 2.0 of the BIND data model is discussed as well as implementation, content and the open nature of the BIND project. The BIND data specification is available as ASN.1 and XML DTD.

Modelagem estocástica da dispersão axial: aplicação em um reator tubular de polimerização.

Reatores tubulares de polimerização podem apresentar um perfil de velocidade bastante distorcido. Partindo desta observação, um modelo estocástico baseado no modelo de dispersão axial foi proposto para a representação matemática da fluidodinâmica de um reator tubular para produção de poliestireno. A equação diferencial foi obtida inserindo a aleatoriedade no parâmetro de dispersão, resultando na adição de um termo estocástico ao modelo capaz de simular as oscilações observadas experimentalmente. A equação diferencial estocástica foi discretizada e resolvida pelo método Euler-Maruyama de forma satisfatória. Uma função estimadora foi desenvolvida para a obtenção do parâmetro do termo estocástico e o parâmetro do termo determinístico foi calculado pelo método dos mínimos quadrados. Uma análise de convergência foi conduzida para determinar o número de elementos da discretização e o modelo foi validado através da comparação de trajetórias e de intervalos de confiança computacionais com dados experimentais. O resultado obtido foi satisfatório, o que auxilia na compreensão do comportamento fluidodinâmico complexo do reator estudado.

Essays on Firm Heterogeneity with Empirical Applications in Economic History and Agricultural Economics

This thesis uses models of firm-heterogeneity to complete empirical analyses in economic history and agricultural economics. In Chapter 2, a theoretical model of firm heterogeneity is used to derive a statistic that summarizes the welfare gains from the introduction of a new technology. The empirical application considers the use of mechanical steam power in the Canadian manufacturing sector during the late nineteenth century. I exploit exogenous variation in geography to estimate several parameters of the model. My results indicate that the use of steam power resulted in a 15.1 percent increase in firm-level productivity and a 3.0-5.2 percent increase in aggregate welfare. Chapter 3 considers various policy alternatives to price ceiling legislation in the market for production quotas in the dairy farming sector in Quebec. I develop a dynamic model of the demand for quotas with farmers that are heterogeneous in their marginal cost of milk production. The econometric analysis uses farm-level data and estimates a parameter of the theoretical model that is required for the counterfactual experiments. The results indicate that the price of quotas could be reduced to the ceiling price through a 4.16 percent expansion of the aggregate supply of quotas, or through moderate trade liberalization of Canadian dairy products. In Chapter 4, I study the relationship between farm-level productivity and participation in the Commercial Export Milk (CEM) program. I use a difference-in-difference research design with inverse propensity weights to test for causality between participation in the CEM program and total factor productivity (TFP). I find a positive correlation between participation in the CEM program and TFP, however I find no statistically significant evidence that the CEM program affected TFP.

TABLETUTORIAL: Stata module to provide tutorial on automated table generation and reporting

-tabletutorial- illustrates how Stata can be used to export statistical results and generate customized reports. Part 1 explains how results from Stata routines can be accessed and how they can be exported using the -file- comand or a wrapper such as, e.g., -mat2txt-. Part 2 shows how model estimation results can be archived using -estwrite- and how models can be tabulated and exported to LaTeX, MS Excel, or MS Word using -estout-. Part 3 illustrates how to set up automatic reports in LaTeX or MS Word. The tutorial is based on a talk given at CEPS/INSTEAD in Luxembourg in October 2008. After install, type -help tabletutorial- to start the tutorial (in Stata 8, type -whelp tabletutorial-). The -mat2txt-, -estwrite-, and -estout- packages, also available from SSC, are required to run the examples.