Redox Biology Center Mini-Symposium

Good morning. It's my very great pleasure to welcome you to this third annual mini-symposium in Redox Biology.

Plastic pellets as oviposition site and means of dispersal for the ocean-skater insect Halobates

Microplastics are omnipresent in the oceans and generally have negative impacts on the biota. However, flotsam may increase the availability of hard substrates, which are considered a limiting resource for some oceanic species, e.g. as oviposition sites for the ocean insect Halobates. This study describes the use of plastic pellets as an oviposition site for Halobates micans and discusses possible effects on its abundance and dispersion. Inspection of egg masses on stranded particles on beaches revealed that a mean of 24% (from 0% to 62%) of the pellets bore eggs (mean of 5 and max. of 48 eggs per pellet). Most eggs (63%) contained embryos, while 37% were empty egg shells. This shows that even small plastic particles are used as oviposition site by H. micans, and that marine litter may have a positive effect over the abundance and dispersion of this species. (C) 2012 Elsevier Ltd. All rights reserved.

Early Rheumatoid Arthritis in Latin America: Low Socioeconomic Status Related to High Disease Activity at Baseline

Objective. To determine the influence of socioeconomic factors on disease activity in a Latin American (LA) early rheumatoid arthritis (RA) multinational inception cohort at baseline. Methods. Clinical evaluation, ethnicity, socioeconomic status (SES), 4-variable Disease Activity Score in 28 joints using the erythrocyte sedimentation rate (DAS28-ESR), Health Assessment Questionnaire (HAQ) disability index (DI), and erosions were recorded in 1,093 patients with early RA (<1 year from onset). Multivariate analyses evaluated influences of sex, age, marital status, education, medical coverage, SES, and ethnicity on HAQ DI, DAS28-ESR, and presence of erosions. Results. Ethnicities included 43% Mestizo, 31% Caucasian, 19% African LA, 4% Amerindian, and 3% other. Fifty-eight percent were of low/low-middle SES, 42% had <8 years of education, 21% had no medical coverage, median disease duration was 6 months (25th, 75th percentiles 4, 9 months), median HAQ DI score was 1.25 (25th, 75th percentiles 0.63, 2.00), median DAS28-ESR score was 6.2 (25th, 75th percentiles 4.9, 7.2), and 25% had erosions. Women and Mestizos, African LA, and Amerindians had earlier onset than men or Caucasians (P < 0.01). When adjusted by country, the analysis of covariance model showed that low/low-middle SES, female sex, partial coverage, and older age were associated with worse HAQ DI scores; only low/low-middle SES was associated with higher DAS28 scores. Statistically significant differences were found in HAQ DI and DAS28 scores between countries. When excluding country, low/low-middle SES, female sex, and no coverage were associated with worse HAQ DI and DAS28 scores, whereas separated/divorced/widowed status was associated with worse HAQ DI scores and age was associated with worse DAS28 scores. Logistic regression showed that older age, no coverage, and the Amerindian and other ethnic groups were associated with erosions. Conclusion. We compared early RA patients from the main LA ethnic groups. Our findings suggest that low/low-middle SES is important in determining disease activity. A more genetic-related background for erosions is possible.

Comparison of Ozone and Chlorine in Low Concentrations as Sanitizing Agents of Chicken Carcasses in the Water Immersion Chiller

The aim of this study was to investigate the effects of the use of chlorine or ozone as sanitizing agents in the water of chicken immersion chilling, using the residual levels usually applied in Brazil (1.5 ppm), comparing the effects of these treatments on the microbiological, physicochemical, and sensory characteristics of carcasses. Chicken carcasses were chilled in water (4 degrees C) with similar residual levels of ozone and chlorine until reaching temperatures below 7 degrees C (around 45 min). The stability of carcasses was assessed during 15 days of storage at 2 +/- 1 degrees C. Microbiological, surface color (L*, a*, b* parameters), pH value, lipid oxidation (thiobarbituric acid reactive substances index), and sensory evaluation (on a 9-point hedonic scale for odor and appearance) analyses were carried out. The presence of Salmonella was not detected, coagulase-positive staphylococci counts were below 10(2) CFU/ml of rinse fluid, and Escherichia coil and total coliform counts were below 10(5) CFU/ml of rinse fluid until the end of the storage period for both treatments. Psychrotrophic microorganism counts did not differ (P > 0.05) between chlorine and ozone treatments, and both values were near 10(9) CFU/ml of rinse fluid after 15 days at 4 +/- 1 degrees C. pH values did not differ between treatments (P > 0.05) or during the storage period (P > 0.05). In addition, neither chlorine nor ozone treatment showed differences (P > 0.05) in the lipid oxidation of carcasses; however, the thiobarbituric acid reactive substances index of both treatments increased (P <= 0.05) during the storage period, reaching values of approximately 0.68 mg of malonaldehyde per kg. Samples from both treatments did not differ (P > 0.05) in their acceptance scores for odor and overall appearance, but in the evaluation of color, ozone showed an acceptance score significantly higher (P <= 0.05) than that for the chlorine treatment. In general, under the conditions tested, ozone showed results similar to the results for chlorine in the disinfection of chicken carcasses in the immersion chilling, which may indicate its use as a substitute for chlorine in poultry slaughterhouses.

Composição, diversidade e distribuição geográfica de plantas vasculares de uma Floresta Ombrófila Densa Atlântica do Sudeste do Brasil

In the Montane and Submontane Rain Forest of the Carlos Botelho State Park - PECB (ca. 37,000 ha) the composition, richness and geographical distribution of native, vascular forest species was evaluated. The analysis of 1143 species of 140 families supported the pattern found for other forests of Eastern Brazil, showing high species richness of Myrtaceae (85 species), Orchidaceae (81), Fabaceae (57), Asteraceae, Melastomataceae (54), Lauraceae (53), Rubiaceae (51), Bromeliaceae (43), Piperaceae (30) and Solanaceae (25), besides ferns (123). The most species-rich genera were Eugenia (34), Ocotea (26), Leandra, Myrcia, Vriesea (18), Piper, Solanum (16), Miconia (14), Mollinedia (13), and Peperomia (12). The richness and composition varied greatly among life forms, as well as the number of families represented in each one of them (only Rubiaceae had species in all life forms, except parasites). Trees had the largest contribution of total richness (39.1%), a value that represented more than 20% of the species listed for the whole Atlantic Forest of Southeastern Brazil. Trees were followed by epiphytes (22.4%), herbs (18.4%), shrubs (10.1%), lianas (9.1%), and parasites (0.9%). The overall richness and composition of life forms was quite close to other neotropical forests (e.g. high contribution of ferns among epiphytes), although some life forms remain undersampled in the PECB (mainly herbs, lianas and epiphytes). The occurrence of species endemic to the Atlantic Forest was pronounced (65%), with a predominance of species restricted to the Southern Atlantic Forest (43%). Pantropical species were rare (2%), being more common among ferns. Myrtaceae and Melastomataceae were the families with greater number and proportion of endemic species.

Diversity and genetic structure in natural populations of Hancornia speciosa var. speciosa Gomes in northeastern Brazil

Hancornia speciosa Gomes is a fruit tree native from Brazil that belongs to Apocinaceae family, and is popularly known as Mangabeira. Its fruits are widely consumed raw or processed as fruit jam, juices and ice creams, which have made it a target of intense exploitation. The extractive activities and intense human activity on the environment of natural occurrence of H. speciosa has caused genetic erosion in the species and little is known about the ecology or genetic structure of natural populations. The objective of this research was the evaluation of the genetic diversity and genetic structure of H. speciosa var. speciosa. The genetic variability was assessed using 11 allozyme loci with a sample of 164 individuals distributed in six natural populations located in the States of Pernambuco and Alagoas, Northeastern Brazil. The results showed a high level of genetic diversity within the species (e= 0.36) seeing that the most of the genetic variability of H. speciosa var. speciosa is within its natural populations with low difference among populations ( or = 0.081). The inbreeding values within ( = -0.555) and among populations ( =-0.428) were low showing lacking of endogamy and a surplus of heterozygotes. The estimated gene flow ( m ) was high, ranging from 2.20 to 13.18, indicating to be enough to prevent the effects of genetic drift and genetic differentiation among populations. The multivariate analyses indicated that there is a relationship between genetic and geographical distances, which was confirmed by a spatial pattern analysis using Mantel test (r = 0.3598; p = 0.0920) with 1000 random permutations. The high genetic diversity index in these populations indicates potential for in situ genetic conservation.

Utilizzo metrico di immagini panoramiche satellitari CORONA

CAPITOLO 1 INTRODUZIONE Il lavoro presentato è relativo all’utilizzo a fini metrici di immagini satellitari storiche a geometria panoramica; in particolare sono state elaborate immagini satellitari acquisite dalla piattaforma statunitense CORONA, progettata ed impiegata essenzialmente a scopi militari tra gli anni ’60 e ’70 del secolo scorso, e recentemente soggette ad una declassificazione che ne ha consentito l’accesso anche a scopi ed utenti non militari. Il tema del recupero di immagini aeree e satellitari del passato è di grande interesse per un ampio spettro di applicazioni sul territorio, dall’analisi dello sviluppo urbano o in ambito regionale fino ad indagini specifiche locali relative a siti di interesse archeologico, industriale, ambientale. Esiste infatti un grandissimo patrimonio informativo che potrebbe colmare le lacune della documentazione cartografica, di per sé, per ovvi motivi tecnici ed economici, limitata a rappresentare l’evoluzione territoriale in modo asincrono e sporadico, e con “forzature” e limitazioni nel contenuto informativo legate agli scopi ed alle modalità di rappresentazione delle carte nel corso del tempo e per diversi tipi di applicazioni. L’immagine di tipo fotografico offre una rappresentazione completa, ancorché non soggettiva, dell’esistente e può complementare molto efficacemente il dato cartografico o farne le veci laddove questo non esista. La maggior parte del patrimonio di immagini storiche è certamente legata a voli fotogrammetrici che, a partire dai primi decenni del ‘900, hanno interessato vaste aree dei paesi più avanzati, o regioni di interesse a fini bellici. Accanto a queste, ed ovviamente su periodi più vicini a noi, si collocano le immagini acquisite da piattaforma satellitare, tra le quali rivestono un grande interesse quelle realizzate a scopo di spionaggio militare, essendo ad alta risoluzione geometrica e di ottimo dettaglio. Purtroppo, questo ricco patrimonio è ancora oggi in gran parte inaccessibile, anche se recentemente sono state avviate iniziative per permetterne l’accesso a fini civili, in considerazione anche dell’obsolescenza del dato e della disponibilità di altre e migliori fonti di informazione che il moderno telerilevamento ci propone. L’impiego di immagini storiche, siano esse aeree o satellitari, è nella gran parte dei casi di carattere qualitativo, inteso ad investigare sulla presenza o assenza di oggetti o fenomeni, e di rado assume un carattere metrico ed oggettivo, che richiederebbe tra l’altro la conoscenza di dati tecnici (per esempio il certificato di calibrazione nel caso delle camere aerofotogrammetriche) che sono andati perduti o sono inaccessibili. Va ricordato anche che i mezzi di presa dell’epoca erano spesso soggetti a fenomeni di distorsione ottica o altro tipo di degrado delle immagini che ne rendevano difficile un uso metrico. D’altra parte, un utilizzo metrico di queste immagini consentirebbe di conferire all’analisi del territorio e delle modifiche in esso intercorse anche un significato oggettivo che sarebbe essenziale per diversi scopi: per esempio, per potere effettuare misure su oggetti non più esistenti o per potere confrontare con precisione o co-registrare le immagini storiche con quelle attuali opportunamente georeferenziate. Il caso delle immagini Corona è molto interessante, per una serie di specificità che esse presentano: in primo luogo esse associano ad una alta risoluzione (dimensione del pixel a terra fino a 1.80 metri) una ampia copertura a terra (i fotogrammi di alcune missioni coprono strisce lunghe fino a 250 chilometri). Queste due caratteristiche “derivano” dal principio adottato in fase di acquisizione delle immagini stesse, vale a dire la geometria panoramica scelta appunto perché l’unica che consente di associare le due caratteristiche predette e quindi molto indicata ai fini spionaggio. Inoltre, data la numerosità e la frequenza delle missioni all’interno dell’omonimo programma, le serie storiche di questi fotogrammi permettono una ricostruzione “ricca” e “minuziosa” degli assetti territoriali pregressi, data appunto la maggior quantità di informazioni e l’imparzialità associabili ai prodotti fotografici. Va precisato sin dall’inizio come queste immagini, seppur rappresentino una risorsa “storica” notevole (sono datate fra il 1959 ed il 1972 e coprono regioni moto ampie e di grandissimo interesse per analisi territoriali), siano state molto raramente impiegate a scopi metrici. Ciò è probabilmente imputabile al fatto che il loro trattamento a fini metrici non è affatto semplice per tutta una serie di motivi che saranno evidenziati nei capitoli successivi. La sperimentazione condotta nell’ambito della tesi ha avuto due obiettivi primari, uno generale ed uno più particolare: da un lato il tentativo di valutare in senso lato le potenzialità dell’enorme patrimonio rappresentato da tali immagini (reperibili ad un costo basso in confronto a prodotti simili) e dall’altro l’opportunità di indagare la situazione territoriale locale per una zona della Turchia sud orientale (intorno al sito archeologico di Tilmen Höyük) sulla quale è attivo un progetto condotto dall’Università di Bologna (responsabile scientifico il Prof. Nicolò Marchetti del Dipartimento di Archeologia), a cui il DISTART collabora attivamente dal 2005. L’attività è condotta in collaborazione con l’Università di Istanbul ed il Museo Archeologico di Gaziantep. Questo lavoro si inserisce, inoltre, in un’ottica più ampia di quelle esposta, dello studio cioè a carattere regionale della zona in cui si trovano gli scavi archeologici di Tilmen Höyük; la disponibilità di immagini multitemporali su un ampio intervallo temporale, nonché di tipo multi sensore, con dati multispettrali, doterebbe questo studio di strumenti di conoscenza di altissimo interesse per la caratterizzazione dei cambiamenti intercorsi. Per quanto riguarda l’aspetto più generale, mettere a punto una procedura per il trattamento metrico delle immagini CORONA può rivelarsi utile all’intera comunità che ruota attorno al “mondo” dei GIS e del telerilevamento; come prima ricordato tali immagini (che coprono una superficie di quasi due milioni di chilometri quadrati) rappresentano un patrimonio storico fotografico immenso che potrebbe (e dovrebbe) essere utilizzato sia a scopi archeologici, sia come supporto per lo studio, in ambiente GIS, delle dinamiche territoriali di sviluppo di quelle zone in cui sono scarse o addirittura assenti immagini satellitari dati cartografici pregressi. Il lavoro è stato suddiviso in 6 capitoli, di cui il presente costituisce il primo. Il secondo capitolo è stato dedicato alla descrizione sommaria del progetto spaziale CORONA (progetto statunitense condotto a scopo di fotoricognizione del territorio dell’ex Unione Sovietica e delle aree Mediorientali politicamente correlate ad essa); in questa fase vengono riportate notizie in merito alla nascita e all’evoluzione di tale programma, vengono descritti piuttosto dettagliatamente gli aspetti concernenti le ottiche impiegate e le modalità di acquisizione delle immagini, vengono riportati tutti i riferimenti (storici e non) utili a chi volesse approfondire la conoscenza di questo straordinario programma spaziale. Nel terzo capitolo viene presentata una breve discussione in merito alle immagini panoramiche in generale, vale a dire le modalità di acquisizione, gli aspetti geometrici e prospettici alla base del principio panoramico, i pregi ed i difetti di questo tipo di immagini. Vengono inoltre presentati i diversi metodi rintracciabili in bibliografia per la correzione delle immagini panoramiche e quelli impiegati dai diversi autori (pochi per la verità) che hanno scelto di conferire un significato metrico (quindi quantitativo e non solo qualitativo come è accaduto per lungo tempo) alle immagini CORONA. Il quarto capitolo rappresenta una breve descrizione del sito archeologico di Tilmen Höyuk; collocazione geografica, cronologia delle varie campagne di studio che l’hanno riguardato, monumenti e suppellettili rinvenute nell’area e che hanno reso possibili una ricostruzione virtuale dell’aspetto originario della città ed una più profonda comprensione della situazione delle capitali del Mediterraneo durante il periodo del Bronzo Medio. Il quinto capitolo è dedicato allo “scopo” principe del lavoro affrontato, vale a dire la generazione dell’ortofotomosaico relativo alla zona di cui sopra. Dopo un’introduzione teorica in merito alla produzione di questo tipo di prodotto (procedure e trasformazioni utilizzabili, metodi di interpolazione dei pixel, qualità del DEM utilizzato), vengono presentati e commentati i risultati ottenuti, cercando di evidenziare le correlazioni fra gli stessi e le problematiche di diversa natura incontrate nella redazione di questo lavoro di tesi. Nel sesto ed ultimo capitolo sono contenute le conclusioni in merito al lavoro in questa sede presentato. Nell’appendice A vengono riportate le tabelle dei punti di controllo utilizzati in fase di orientamento esterno dei fotogrammi.

Sviluppo e validazione di un modello di film fluido per simulazioni CFD di motori a combustione interna

A wall film model has been implemented in a customized version of KIVA code developed at University of Bologna. Under the hypothesis of `thin laminar ow' the model simulates the dynamics of a liquid wall film generated by impinging sprays. Particular care has been taken in numerical implementation of the model. The major phenomena taken into account in the present model are: wall film formation by impinging spray; body forces, such as gravity or acceleration of the wall; shear stress at the interface with the gas and no slip condition on the wall; momentum contribution and dynamic pressure generated by the tangential and normal component of the impinging drops; film evaporation by heat exchange with wall and surrounding gas. The model doesn't consider the effect of the wavy film motion and suppose that all the impinging droplets adhere to the film. The governing equations have been integrated in space by using a finite volume approach with a first order upwind differencing scheme and they have been integrated in time with a fully explicit method. The model is validated using two different test cases reproducing PFI gasoline and DI Diesel engine wall film conditions.

Silicon-containing block copolymers with well-defined, branched architectures

In the past decade, block copolymers (BCPs) have attracted increasing scientific and technological interest because of their inherent capability to spontaneously self-assemble into ordered arrays of nanostructures. The importance of nanostructures in a number of applications has fostered the need for well-defined, complex macromolecular architectures. In this thesis, the influence of macromolecular architecture on the bulk morphologies of novel linear-hyperbranched and linear brush-like diblock copolymer structure is investigated. An innovative, generally applicable strategy for the preparation of these defined diblock copolymers, consisting of linear polystyrene and branched polycarbosilane blocks, is demonstrated. Furthermore, complete characterization and solid-state morphological studies are provided. Finally, the concept is extended to linear-hyperbrached and linear brush-like polyalkoxysilanes. A shift of the classical phase boundaries to higher PS weight fractions as well as the appearance of new morphologies confirms the dramatic effect that polymer topology has on the morphology of BCPs.

[CONSORT 2010 Explanation and Elaboration: updated guidelines for reporting parallel group randomised trials (Chinese version)]

Overwhelming evidence shows the quality of reporting of randomised controlled trials (RCTs) is not optimal. Without transparent reporting, readers cannot judge the reliability and validity of trial findings nor extract information for systematic reviews. Recent methodological analyses indicate that inadequate reporting and design are associated with biased estimates of treatment effects. Such systematic error is seriously damaging to RCTs, which are considered the gold standard for evaluating interventions because of their ability to minimise or avoid bias. A group of scientists and editors developed the CONSORT (Consolidated Standards of Reporting Trials) statement to improve the quality of reporting of RCTs. It was first published in 1996 and updated in 2001. The statement consists of a checklist and flow diagram that authors can use for reporting an RCT. Many leading medical journals and major international editorial groups have endorsed the CONSORT statement. The statement facilitates critical appraisal and interpretation of RCTs. During the 2001 CONSORT revision, it became clear that explanation and elaboration of the principles underlying the CONSORT statement would help investigators and others to write or appraise trial reports. A CONSORT explanation and elaboration article was published in 2001 alongside the 2001 version of the CONSORT statement. After an expert meeting in January 2007, the CONSORT statement has been further revised and is published as the CONSORT 2010 Statement. This update improves the wording and clarity of the previous checklist and incorporates recommendations related to topics that have only recently received recognition, such as selective outcome reporting bias. This explanatory and elaboration document-intended to enhance the use, understanding, and dissemination of the CONSORT statement-has also been extensively revised. It presents the meaning and rationale for each new and updated checklist item providing examples of good reporting and, where possible, references to relevant empirical studies. Several examples of flow diagrams are included. The CONSORT 2010 Statement, this revised explanatory and elaboration document, and the associated website (www.consort-statement.org) should be helpful resources to improve reporting of randomised trials.

Improved virological outcome in White patients infected with HIV-1 non-B subtypes compared to subtype B

Antiretroviral compounds have been predominantly studied in human immunodeficiency virus type 1 (HIV-1) subtype B, but only ~10% of infections worldwide are caused by this subtype. The analysis of the impact of different HIV subtypes on treatment outcome is important.

Understanding Electrophoretic Stacking Of In-Capillary Generated Reaction Products

The separation of small molecules by capillary electrophoresis is governed by a complex interplay among several physical effects. Until recently, a systematic understanding of how the influence of all of these effects is observed experimentally has remained unclear. The work presented in this thesis involves the use of transient isotachophoretic stacking (tITP) and computer simulation to improve and better understand an in-capillary chemical assay for creatinine. This assay involves the use of electrophoretically mediated micro-analysis (EMMA) to carry out the Jaffé reaction inside a capillary tube. The primary contribution of this work is the elucidation of the role of the length and concentration of the hydroxide plug used to achieve tITP stacking of the product formed by the in-capillary EMMA/Jaffé method. Computer simulation using SIMUL 5.0 predicts that a 3-4 fold gain in sensitivity can be recognized by timing the tITP stacking event such that the Jaffé product peak is at its maximum height as that peak is electrophoresing past the detection window. Overall, the length of the hydroxide plug alters the timing of the stacking event and lower concentration plugs of hydroxide lead to more rapidly occurring tITP stacking events. Also, the inclusion of intentional tITP stacking in the EMMA/Jaffé method improves the sensitivity of the assay, including creatinine concentrations within the normal biological range. Ultimately, improvement in assay sensitivity can be rationally designed by using the length and concentration of the hydroxide plug to engineer the timing of the tITP stacking event such that stacking occurs as the Jaffé product is passing the detection window.