759 resultados para 1056
Resumo:
Objectives: This study investigated the effect of porcelain firing on the misfit of implant-supported frameworks and analyzed the influence of preheat treatment on the dimensional alterations.Materials and Methods: Four external-hex cylindrical implants were placed in polyurethane block. Ten frameworks of screw-retained implant-supported prostheses were cast in Pd-Ag using 2 procedures: (1) control group (CG, n = 5): cast in segments and laser welded; and test group (TG, n = 5): cast in segments, preheated, and laser welded. All samples were subjected to firing to simulate porcelain veneering firing. Strain gauges were bonded around the implants, and microstrain values (mu epsilon = 10(-6)epsilon) were recorded after welding (M1), oxidation cycle (M2), and glaze firing (M3). Data were statistically analyzed (2-way analysis of variance, Bonferroni, alpha = 0.05).Results: The microstrain value in the CG at M3 (475.2 mu epsilon) was significantly different from the values observed at M1 (355.6 mu epsilon) and M2 (413.9 mu epsilon). The values at M2 and M3 in the CG were not statistically different. Microstrain values recorded at different moments (M1: 361.6 mu epsilon/M2: 335.3 mu epsilon/M3: 307.2 mu epsilon) did not show significant difference.Conclusions: The framework misfit deteriorates during firing cycles of porcelain veneering. Metal distortion after porcelain veneering could be controlled by preheat treatment. (Implant Dent 2012;21:225-229)
Resumo:
Purpose: The present study was designed to analyze strain distributions caused by varying the fixture-abutment design and fixture alignment.Materials and Methods: Three implants of external, internal hexagon, and Morse taper were embedded in the center of each polyurethane block in straight placement and offset placement. Four strain gauges (SGs) were bonded on the surface of polyurethane block, which was designated SG1 placed mesially adjacent to implant A, SG2 and SG3 were placed mesially and distally adjacent to the implant B and SG4 was placed distally adjacent to the implant C. The 30 superstructures' occlusal screws were tightened onto the Microunit abutments with a torque of 10 N cm using the manufacturers' manual torque-controlling device.Results: There were statistically significant differences in prosthetic connection (P value = 0.0074 < 0.5). There were no statistically significant differences in placement configuration/alignment (P value = 0.7812 > 0.5).Conclusion: The results showed fundamental differences in both conditions. There was no evidence that there was any advantage to offset implant placement in reducing the strain around implants. The results also revealed that the internal hexagon and Morse taper joints did not reduce the microstrain around implants. (Implant Dent 2011; 20:e24-e32)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The infinite cosmological constant limit of the de Sitter solutions to Einstein's equation is studied. The corresponding spacetime is a singular, four-dimensional cone-space, transitive under proper conformal transformations, which constitutes a new example of maximally-symmetric spacetime. Grounded on its geometric and thermodynamic properties, some speculations are made in connection with the primordial universe. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Damage caused by the ant Azteca barbifex (Forel) was identified in orange trees (Citrus sinensis), in Capitão Poço County, Guamá microregion, Pará State. The damage caused by the scraping of stems and branches lead to reduction in yield with subsequent death of the plant. These characteristics indicate A. barbifex as a potential pest of citrus crops in the eastern region of Amazon.
Alterações hemodinâmicas e intracranianas em cães com hemorragia aguda, anestesiados com isofluorano
Resumo:
Estudaram-se possíveis alterações hemodinâmicas e intracranianas em cães submetidos à hemorragia aguda e anestesiados pelo isofluorano. Verificou-se também a influência do anestésico no mecanismo de auto-regulação cerebral. Utilizaram-se 20 cães adultos que foram induzidos à anestesia geral com isofluorano por máscara naso-oral a 3,5V% (volume %). Após a intubação orotraqueal, reajustou-se o vaporizador para 2,1V%. Induziu-se a hipovolemia retirando-se volume total de 35ml/kg de sangue. Avaliaram-se pressão intracraniana (PIC), temperaturas intracraniana (TIC) e corpórea (T), pressão de perfusão cerebral (PPC), pressões arteriais sistólica (PAS), diastólica (PAD) e média (PAM), freqüências cardíaca (FC) e respiratória (FR), índices cardíaco (IC) e sistólico (IS), pressão venosa central (PVC), pressão da artéria pulmonar (PAP), concentração de dióxido de carbono ao final da expiração (ETCO2) e saturação de oxihemoglobina (SpO2). Imediatamente após a hipovolemia, houve redução significativa da PIC, PPC, PAS, PAD, PAM, IC, IS e PAP. Após 10 minutos, houve aumento gradativo das médias, permanecendo neste patamar até o final do período experimental. Concluiu-se que a hemorragia aguda promoveu redução das variáveis hemodinâmicas, sendo possível verificar a ativação de mecanismos compensatórios. Além disso, houve redução da perfusão sangüínea e ativação do mecanismo de auto-regulação cerebral, conseqüentes à hipovolemia associada à anestesia com isofluorano.
Resumo:
The present study was designed to determine the exercise intensity equivalent to the metabolic aerobic/anaerobic transition of alloxan diabetic rats, through lactate minimum test (LMT), and to evaluate the effects of swimming exercise at this intensity (LM) on the glucose and protein metabolism of these animals. Adult male Wistar rats received alloxan (SD, alloxan-injected rats that remained sedentary) intravenously (30 mg kg(-1) body weight) for diabetes induction. As controls (SC, vehicle-injected rats that remained sedentary), vehicle-injected rats were utilized. Two weeks later, the animals were submitted to oral glucose tolerance test (oGTT) and LMT. After the tests, some of the animals were submitted to swimming exercise training [TC (vehicle-injected rats that performed a 6-week exercise program) and TD (alloxan-injected rats that performed a 6-week exercise program)] for I h day(-1), 5 days week(-1), with an overload equivalent to LM determined by LMT, for 6 weeks. At the end of the experiment, the animals were submitted to a second LMT and oGTT, and blood and skeletal muscle assessments (protein synthesis and degradation in the isolated soleus muscle) were made. The overload equivalent to LM at the beginning of the experiment was lower in the SID group than in the SC group. After training, the overload equivalent to LM was higher in the TC and TD groups than in the SC and SD groups. The blood glucose of TD rats during oGTT was lower than that of SD rats. Protein degradation was higher in the SD group than in other groups. We conclude that LMT was sensitive to metabolic and physiologic alterations caused by uncontrolled diabetes. Training at LM intensity improved aerobic condition and the glucose and protein metabolism of alloxan diabetic rats. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, São Paulo state, Brazil, within a period of 132 days of composting were studied.Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis.The values obtained were: average activation energy, E-a=248, 257 and 259 kJ mol(-1) and pre-exponential factor, logA=21.4, 22.5, 22.7 min(-1), to the ST, SR and SM, respectively.From E-a and logA values and DSC curves, Malek procedure could be applied, suggesting that the SB (Sestak-Berggren) kinetic model is the appropriated one to the first thermal decomposition step.
Resumo:
The effect of dietary vitamin (VS) and mineral (MS) mix withdrawal between 42 and 49 d of age on broiler chicken performance was evaluated. The diets were formulated based on corn and soybean meal, and the experiments were conducted in floor pens using wood shavings as litter. Trial I evaluated withdrawal of VS and MS mix at 42, 45, and 49 d. The results of this trial showed that VS and MS mix withdrawal at 42 d of age did not impair feed intake (FI) or weight gain (WG), but feed conversion (FC) was improved (P = 0.043) when both mixes were maintained in the diets until 49 d of age. Trial 2 assessed the withdrawal of VS or MS mix at 42 d of age. FI and WG were not affected by withdrawal, but FC was poorer (P = 0.035) for the broilers fed the diet without VS. The relative liver weight was reduced by VS or MS mix withdrawal (P = 0.014 and P = 0.001, respectively). Carcass, breast, and leg yields were not affected by VS or MS mix withdrawals in either trial. The findings of the study suggested that VS mix withdrawal during the final period of broiler chicken growth was more deleterious than the withdrawal of MS mix, because it affected FC ratio. VS or MS withdrawal during this period did not affect carcass yield.
Resumo:
Biomass of the photosynthetic bacterium Rhodocyclus gelatinosus was used at different levels in laying hens' rations as a xanthophyll source. Sixty-four hens were used in the experiment that investigated the effects of different biomass concentrations on weight gain, egg production, egg weight, and yolk color as compared with a control group that received no biomass supplementation in the ration. Yolk color was scored by means of a color fan. All concentrations tested were able to provide yolk color scores higher than those provided by the control group. The pigment deposition began after 24 h of administration and reached a plateau around the twentieth day. Each increase in the supplementation level led to an additional increase on yolk color scores. Yolk colors of all treatments that received R. gelatinosus biomass differed significantly from the control group and from each other, corroborating that the increase in the biomass supplementation had a positive effect on color increase. Body weight loss occurred in all treatments. Egg production did not increase with the biomass addition, while a significant increase in egg weight was observed in the treatments that received the product.
Resumo:
We evaluated the influence of dietry inclusion of corn gluten meal, apocartenoic acid ethyl ester (APO-EE), canthaxanthin, and Rhodocylus gelatinosus R-1 biomass on broiler carcass color. These oxycarotenoid sources were used as pigment supplements to a basal ration containing yellow corn as the sole source of xnathophylls. Objective color values of L (lightness),C (chroma), and h (hue) were measured on skin and meat surfaces of broiler carcasses. on both surfaces, R. gelatinosus R-1 biomass oxycarotenoids enhanced the chroma values (color saturation), as compared to yellow corn xanthophylls, and tended to provide yellowness to broiler carcasses, whereas the APO-EE and canthaxanthin tended to provide redness. At the concentrations studied, R. gelatinosus R-1 biomass oxycarotenoids were less effective than APO-EE and canthaxanthin in enhancing color saturation. Lightness, chroma, and blue values did not differ significantly between males and females. However, skin showed significantly higher color saturation than meat in breast and thigh portions of the carcass.