Cloreto de sódio a 0,9%, adicionado ou não de dexametasona, intrapleural, na prevenção de aderências pulmonares após toracotomia intercostal em cães

Pulmonary adhesions in dogs are a common sequel after surgical intervention, undermining any interventions. This study aimed to determine in dogs, the efficacy of sodium chloride solution 0.9% with or without dexamethasone in order to prevent adhesions after intercostal thoracotomy. Fifteen dogs were separated into three groups of five animals, A, B and C and underwent thoracotomy in the fifth left intercostal space. Three other dogs were submitted to a previous study. In the dogs of Group A it was performed only a thoracotomy and thoracorraphy; in group B, it was performed a thoracotomy, thoracorraphy and injection into the pleural cavity of isotonic sodium chloride (10ml) and dexamethasone (1mg kg-1). In the dogs of the group C, it was performed the thoracotomy thoracorraphy and injected isotonic sodium chloride (10ml kg-1) into the pleural cavity. After 15 days of thoracotomy, it was performed transdiaphragmatic thoracocospy to determine the presence and score of adhesions between the lung and chest wall. The results demonstrated the presence of adhesions in the majority of group A and reduced or no adhesions in the other groups. For statistical evaluation, it was pplied the chi-square test with significance level of 5% (P≤0.05). The sodium chloride solution 0.9% with or without dexamethasone in the pleural space prevented or reduced lung adhesions after intercostal thoracotomy.

Uso intrapleural de solução de cloreto de sódio 0,9%, adicionada ou não de dexametasona, na prevenção de aderências pulmonares após toracotomia intercostal em cães

Pós-graduação em Cirurgia Veterinária - FCAV

Bloqueio peribulbar com ropivacaína a 0,75% para facectomia em cães: padronização e comparação de técnicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da associação de dexmedetomidina à ropivacaína 0,75% na anestesia peridural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinantes sóciocomportamentais da cárie precoce da infância, em bebês e crianças de 0 a 6 anos de idade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos do cetorolaco de trometamina 0,5%, sem conservante, sobre a resposta inflamatória, a sensibilidade e re-epitelização corneal em coelhos submetidos a ulceração química da córnea

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Síntese e caracterização da cerâmica 'Ti IND. x''('Sm IND. 0,2''Ce IND. 0,8') IND. (1-x)''O IND. (2-Б) para aplicação como anodo em células a combustível de óxido sólido

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Correlação da coalescência de microcavidades com as propriedades mecânicas e elétricas de fios para Tx e Dx de energia elétrica da liga base Al-0,5%Cu-[0,24-0,28]%Fe modificada com teores de silício

Neste trabalho, é feita uma tentativa para estabelecer a influência dos teores [0,5; 0,7 e 0,9]%Si, como agentes modificadores da liga Al-0,05%Cu-[0,24-0,28]%Fe, avaliada através de aspectos que levaram em conta parâmetros operacionais de vazamentos unidirecionais horizontais tais como velocidades (Vs) e taxas de solidificação (Tx). Após operações de corte e usinagem foram obtidos perfis cilíndricos, com diâmetros de 9,5mm e comprimento de 120mm, a partir dos quais, após operações de trabalho à frio, chegou-se a fios com diâmetros de 2,7; 3,0; 3,8 e 4,0mm. Estes perfis foram submetidos à caracterização elétrica, com base na condutividade elétrica, à caracterização mecânica, com base em ensaios tensão/deformação enfatizando o alongamento, e a caracterização estrutural em seções longitudinais, com ênfase na distribuição das partículas de segunda fase e no aspecto da fratura, na qual a metodologia de avaliação das dimensões das microcavidades se utiliza da razão do cumprimento (L) pela largura (W).

Diâmetro folicular e taxa de prenhez em protocolo de sincronização com GnRH ou Benzoato de Estradiol no dia 0 em vacas de corte

This work aimed to evaluate the pregnancy rate and follicular diameter using EB or GnRH on the insertion of progesterone implant (D0) in lactating beef cows. Two groups were tested in two experiments. In Exp. 1 were used 61 Nelore cows divided into two groups: G-BE (n = 32) and G-GnRH (n = 29), on D0 was inserted P4 implant (CIDR ) and applied 2 mL of BE (G-BE) or 2.5 mL GnRH (G-GnRH). In D9 was performed ultrasonography (U.S.) to measure the diameter of the dominant follicle (DF) present in the ovary and the implant was removed, with concomitant administration of 2.5 mL of PGF2a and estradiol cypionate (ECP ) followed by calves removal. After 48 hours all the cows were inseminated and the calves returned. In Exp. 2 50 cows were used following the same protocol described above, but the pregnancy was assessed without performing ovarian US. There was no difference (p>0.05) in pregnancy rate between treatments, BE (55%) or GnRH (41%), but the follicular diameter was significantly higher (p<0.05) in pregnant cows treated with EB (10.7 mm vs. 8.5 mm) and in cows treated with GnRH there was no difference (p>0.05) between pregnant and no pregnant cows (11.6 mm vs. 10.2 mm). We concluded the use of GnRH on D0 did not improve the pregnancy rate in lactating beef cows and follicular diameter was greater (p <0.05) in pregnant cows compared to non-pregnant only in G-BE.

Flow Boiling Characteristics for R1234ze(E) in 1.0 and 2.2 mm Circular Channels

Experimental flow boiling heat transfer results are presented for horizontal 1.0 and 2.2 mm I. D. (internal diameter) stainless steel tubes for tests with R1234ze(E), a new refrigerant developed as a substitute for R134a with a much lower global warming potential (GWP). The experiments were performed for these two tube diameters in order to investigate a possible transition between macro and microscale flow boiling behavior. The experimental campaign includes mass velocities ranging from 50 to 1500 kg/m(2) s, heat fluxes from 10 to 300 kW/m(2), exit saturation temperatures of 25, 31 and 35 degrees C, vapor qualities from 0.05 to 0.99 and heated lengths of 180 mm and 361 mm. Flow pattern characterization was performed using high speed videos. Heat transfer coefficient, critical heat flux and flow pattern data were obtained. R1234ze(E) demonstrated similar thermal performance to R134a data when running at similar conditions. [DOI: 10.1115/1.4004933]

Measurement of the unpolarized K+ Lambda and K+ Sigma 0 electroproduction cross-section off the proton with KAOS-spectrometer

The new stage of the Mainz Microtron, MAMI, at the Institute for Nuclear Physics of the Johannes Gutenberg-University, operational since 2007, allows open strangeness experiments to be performed. Covering the lack of electroproduction data at very low Q2, p(e,K+)Lambda and p(e,K+)Sigma0, reactions have been studied at Q^2 = 0.036(GeV/c)^2 andrnQ^2 = 0.05(GeV=c)^2 in a large angular range. Cross-section at W=1.75rnGeV will be given in angular bins and compared with the predictions of Saclay-Lyon and Kaon Maid isobaric models. We conclude that the original Kaon-Maid model, which has large longitudinal couplings of the photon to nucleon resonances, is unphysical. Extensive studies for the suitability of silicon photomultipliers as read out devices for a scintillating fiber tracking detector, with potential applications in both positive and negative arms of the spectrometer, will be presented as well.

Magnetic resonance (MR) cholangiography: quantitative and qualitative comparison of 3.0 Tesla with 1.5 Tesla

OBJECTIVES: To determine quantitative and qualitative image quality in patients undergoing magnetic resonance (MR) cholangiography at 3.0 Tesla (T) compared with 1.5 T. MATERIALS AND METHODS: Fifty patients (30 women; mean age, 51 years) underwent MR cholangiography at 1.5 T; another 50 patients (25 women; mean age 51 years) were scanned at 3.0 T. MR sequence protocol consisted of breath-hold single-slice rapid acquisition with relaxation enhancement (RARE) and a respiratory-triggered 3D turbo spin echo (3D TSE) sequence. Maximum intensity projections were generated from the 3D TSE datasets. Contrast-to-noise ratio (CNR) measurements between the common bile duct (CBD), left and right intrahepatic duct (LHD, RHD), and periductal tissue were performed. Three radiologists assessed qualitatively the visibility of the CBD, LHD, and RHD and the overall diagnostic quality. RESULTS: Mean gain in CNR at 3.0 T versus 1.5 T in all 3 locations ranged for the RARE sequence from 7.7% to 38.1% and for the 3D TSE from 0.5% to 26.1% (P > 0.05 for all differences). Qualitative analysis did not reveal any significant difference between the 2 field strengths (P > 0.05). CONCLUSIONS: MR cholangiography at 3.0 T shows a trend toward higher CNR without improving image quality significantly.

Three-dimensional magnetic resonance observation of cartilage repair tissue (MOCART) score assessed with an isotropic three-dimensional true fast imaging with steady-state precession sequence at 3.0 Tesla

INTRODUCTION: Cartilage defects are common pathologies and surgical cartilage repair shows promising results. In its postoperative evaluation, the magnetic resonance observation of cartilage repair tissue (MOCART) score, using different variables to describe the constitution of the cartilage repair tissue and the surrounding structures, is widely used. High-field magnetic resonance imaging (MRI) and 3-dimensional (3D) isotropic sequences may combine ideal preconditions to enhance the diagnostic performance of cartilage imaging.Aim of this study was to introduce an improved 3D MOCART score using the possibilities of an isotropic 3D true fast imaging with steady-state precession (True-FISP) sequence in the postoperative evaluation of patients after matrix-associated autologous chondrocyte transplantation (MACT) as well as to compare the results to the conventional 2D MOCART score using standard MR sequences. MATERIAL AND METHODS: The study had approval by the local ethics commission. One hundred consecutive MR scans in 60 patients at standard follow-up intervals of 1, 3, 6, 12, 24, and 60 months after MACT of the knee joint were prospectively included. The mean follow-up interval of this cross-sectional evaluation was 21.4 +/- 20.6 months; the mean age of the patients was 35.8 +/- 9.4 years. MRI was performed at a 3.0 Tesla unit. All variables of the standard 2D MOCART score where part of the new 3D MOCART score. Furthermore, additional variables and options were included with the aims to use the capabilities of isotropic MRI, to include the results of recent studies, and to adapt to the needs of patients and physician in a clinical routine examination. A proton-density turbo spin-echo sequence, a T2-weighted dual fast spin-echo (dual-FSE) sequence, and a T1-weighted turbo inversion recovery magnitude (TIRM) sequence were used to assess the standard 2D MOCART score; an isotropic 3D-TrueFISP sequence was prepared to evaluate the new 3D MOCART score. All 9 variables of the 2D MOCART score were compared with the corresponding variables obtained by the 3D MOCART score using the Pearson correlation coefficient; additionally the subjective quality and possible artifacts of the MR sequences were analyzed. RESULTS: The correlation between the standard 2D MOCART score and the new 3D MOCART showed for the 8 variables "defect fill," "cartilage interface," "surface," "adhesions," "structure," "signal intensity," "subchondral lamina," and "effusion"-a highly significant (P < 0.001) correlation with a Pearson coefficient between 0.566 and 0.932. The variable "bone marrow edema" correlated significantly (P < 0.05; Pearson coefficient: 0.257). The subjective quality of the 3 standard MR sequences was comparable to the isotropic 3D-TrueFISP sequence. Artifacts were more frequently visible within the 3D-TrueFISP sequence. CONCLUSION: In the clinical routine follow-up after cartilage repair, the 3D MOCART score, assessed by only 1 high-resolution isotropic MR sequence, provides comparable information than the standard 2D MOCART score. Hence, the new 3D MOCART score has the potential to combine the information of the standard 2D MOCART score with the possible advantages of isotropic 3D MRI at high-field. A clear limitation of the 3D-TrueFISP sequence was the high number of artifacts. Future studies have to prove the clinical benefits of a 3D MOCART score.