Determinação espectrofotométrica de dipirona em produtos farmacêuticos por injeção em fluxo pela geração de íons triiodeto

A flow injection spectrophotometric procedure was developed for the determination of metamizol in pharmaceutical formulations. The system is based on the reaction between metamizol and triiodide generated in the system by mixing iodate and iodide-starch solutions. The absorbance of triiodide-starch complex giving a steady-state baseline value which was monitored at 580 nm. The inverse peaks caused by metamizol samples were measured and there was a direct relationship between absorbance decreasing and metamizol concentration from 1.4 x 10-4 to 7.0 x 10-4 mol L-1. The RSD was 0.45 % for a metamizol solution 4.2 x 10-4 mol L-1 (n = 10) with a detection limit (three-fold blank standard deviation/slope) of 6.0 x 10-5 mol L-1 The feasibility of the system was demonstrated for the determination of metamizol in commercial samples with sixty results obtained per hour. The results obtained for metamizol in pharmaceutical formulations using the proposed flow procedure and those obtained using an iodimetric procedure are in agreement at the 95% confidence level and within an acceptable range of error.

Quantificação do linalol no óleo essencial da Aniba duckei Korstermans utilizando uma nova coluna capilar POLYH4-MD em Cromatografia Gasosa

In the present work a polyurethane polymer derived from castor oil was used as stationary phase for capillary gas chromatography. The polymer was obtained by reaction of hydroxylated compound and isocynate (NCO), forming urethane. Columns of 7 m x 0,25 mm were then coated with this stationary phase (film thickness of 0,25 µm) using static coating method. The Grob test was also performed. Samples of essential oil of the Aniba duckei Korstermans was then analysed in POLYH4-MD capillary column in order to evaluate its chromatographic perfomance. The linalool was found to be the major component and has been used as compound of departure for many important syntheses. Results show that the experimental columns give higher resolution and can be employed for analysis of essentials oils.

Determinação voltamétrica por redissolução anódica de Cu(II) em águas residuárias empregando um eletrodo de pasta de carbono modificado com quitosana

The electrochemical applications of a CPE modified with chitosan for the determination of Cu(II) in wastewater samples using anodic stripping voltammetry are described. The best voltammetric response was observed for a paste containing 25% m/m of chitosan. A 0.10 mol L-1 NaNO3 solution (pH 6.5) as supporting electrolyte, a pre-concentration potential of -0.20 V, pre-concentration time of 270 s and a scan rate of 25 mV s-1 were selected. The calibration graph was linear in the Cu(II) concentration range from 2.0 x 10-7 to 7.4 x 10-6 mol L-1, with a detection limit of 8.3 x 10-8 mol L-1.

Flow-injection spectrophotometric determination of tetracycline and doxycycline in pharmaceutical formulations using chloramine-T as oxidizing agent

A flow-injection (FI) spectrophotometric procedure is proposed for tetracycline (TC) and doxycycline (DXC) determination in pharmaceuticals. The method is based on the reaction of oxidation of these drugs by chloramine-T in alkaline medium producing red color products (λmax = 535 and 525 nm). Beer´s law is obeyed in the concentration range from 6.62 x 10-5 to 7.72 x 10-4 mol L-1 and 5.37 x 10-5 to 7.16 x 10-4 mol L-1 for TC and DXC, respectively. The analytical frequency was 50 h"1 and 45 h-1 for TC and DXC, respectively. The results obtained by the proposed method were in good agreement with those obtained by the official method at 95% confidence level.

Planejamento fatorial e superfície de resposta: otimização de um método voltamétrico para a determinação de ag(i) empregando um eletrodo de pasta de nanotubos de carbono

A factorial design applied in a voltammetric stripping method for the measurement of Ag(I) in natural water is described. The procedure is based on the effective pre-concentration of silver ions on electrode surface. The calibration graph was linear in the silver concentration range from 7.92 x 10"7 to 1.07 x 10"5 mol L"1 with a detection limit of 3.81 x 10-7 mol L-1. The determination of Ag(I) in natural water samples was carried out satisfactory with the proposed electrode.

Effect of dye structure and redox mediators on anaerobic azo and anthraquinone dye reduction

We investigated the biological decolourisation of dyes with different molecular structures. The kinetic constant values (k1) achieved with azo dye Reactive Red 120 were 7.6 and 10.1 times higher in the presence of RM (redox mediators) AQDS and riboflavin, respectively, than the assays lacking RM. The kinetic constant achieved with the azo dye Congo Red was 42 times higher than that obtained with the anthraquinone dye Reactive Blue 4. The effect of RM on dye reduction was more evident for azo dyes resistant to reductive processes, and ineffective for anthraquinone dyes because of the structural stability of the latter.

Determinação de glicerol livre e total em amostras de biodiesel por método enzimático com detecção colorimétrica

A method based on enzymatic activities was developed using three enzymes (glycerokinase, glycerol-3-phosphate oxidase and peroxidase) and colorimetric detection for the determination of glycerol in biodiesel. The enzymatic conversion of glycerol produces H2O2 that is eliminated by the action of peroxidase, an oxygen acceptor and 4- aminoantipirine, producing water and a colored compound, which was analyzed. This method showed good linear correlation coefficient (r = 0.9937) in the concentration range of 4.95 x 10-5 to 3.96 x 10-4% (w/w) and had experimental limits of detection and quantitation of 7.10 x 10-6 and 2.10 x 10-5% (w/w), respectively.

Modelo de ponto crítico para estimar os danos causados pelo oídio em cevada

Em experimento conduzido no campo com a cultivar cevada (Hordeum vulgare) BR 2 gerou-se o gradiente do oídio pelo uso de fungicidas em tratamento de sementes de modo a se obter um gradiente da incidência da doença e do rendimento de grãos. Com esses dados, através de análise de regressão, obteve-se um modelo que permite estimar o rendimento de grãos da cevada, em função da intensidade do oídio, em diferentes estádios fenológicos da cultura. O melhor modelo foi representado pela equação Y = 2.978,3 - 7,75 X (R² de 0,83) para o estádio de afilhamento. A redução máxima no rendimento de grãos foi de 28,03%.

Self-assembly of supermolecular species directed by hydrogen bonding and aromatic π-π stacking interactions

A new Cu(II) trimers, [Cu3(dcp)2(H2O)8]. 4DMF, with the ligand 3,5-pyrazoledicarboxylic acid monohydrate (H3dcp) has been prepared by solvent method. Its solid-state structure has been characterized by elemental analysis, thermal analysis (TGA and DSC), and single crystal X-ray diffraction. X-ray crystallographic studies reveal that this complex has extended 1-D,2-D and 3-D supramolecular architectures directed by weak interactions (hydrogen bond and aromatic π-π stacking interaction) leading to a sandwich solid-state structure.

A simple spectrophotometric method for the determination of methyldopa using p-chloranil in the presence of hydrogen peroxide

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of methyldopa in pharmaceutical formulations. The method is based on the reaction between tetrachloro-p-benzoquinone (p-chloranil) and methyldopa, accelerated by hydrogen peroxide (H2O2), producing a violet-red compound (λmax = 535 nm) at ambient temperature (25.0 ± 0.2 ºC). Experimental design methodologies were used to optimize the measurement conditions. Beer's law is obeyed in a concentration range from 2.10 x 10-4 to 2.48 x 10-3 mol L-1 (r = 0.9997). The limit of detection was 7.55 x 10-6 mol L-1 and the limit of quantification was 2.52 x 10-5 mol L-1. The intraday precision and interday precision were studied for 10 replicate analyses of 1.59 x 10-3 mol L-1 methyldopa solution and the respective coefficients of variation were 0.7 and 1.1 %. The proposed method was successfully applied to the determination of methyldopa in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the Brazilian Pharmacopoeia procedure at 95 % confidence level.

A simple spectrophotometric method for the determination of captopril in pharmaceutical preparations using ammonium molybdate

A simple, rapid and sensitive spectrophotometric method for the determination of captopril (CPT) in pharmaceutical formulations is proposed. This method is based on the reduction reaction of ammonium molybdate, in the presence of sulphuric acid, for the group thiol of CPT, producing a green compound (λ max 407 nm). Beer's law is obeyed in a concentration range of 4.60 x 10-4 - 1.84 x 10-3 mol l-1 of CPT with an excellent correlation coefficient (r = 0.9995). The limit of detection and limit of quantification were 7.31 x 10-6 e 2.43 x 10-5 mol l-1 of CPT, respectively. The proposed method was successfully applied to the determination of CPT in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the official reported method at 95 % confidence level.

A simple spectrophotometric method for the determination of tetracycline and doxycycline in pharmaceutical formulations using chloramine-T

A simple, rapid, accurate and inexpensive spectrophotometric method for the determination of tetracycline and doxycycline has been developed. The method is based on the reaction between these drugs and chloramine-T in alkaline medium producing red color products with absorbance maximum at the Λ = 535 and 525 nm for the tetracycline and doxycycline, respectively. The best conditions for the reactions have been found using multivariate method. Beer´s law is obeyed in a concentration ranges 1.03 x 10-5 to 3.61 x 10-4 mol L-1 and 1.75 x 10-5 to 3.48 x 10-4 mol L-1 for the tetracycline and doxycycline, respectively. The quantification limits were 5.63 x 10-6 mol L-1 and 7.12 x 10-7 mol L-1 for the tetracycline and doxycycline, respectively. The proposed method was successfully applied to the determination of these drugs in pharmaceutical formulations and the results obtained were in good agreement with those obtained by the comparative method at the 95% confidence level.

Incidência de patógenos e vigor de sementes de milho doce submetidas a danos mecânicos

Com o objetivo de avaliar a incidência de patógenos e o vigor de sementes de milho doce de diferentes classes de tamanhos submetidas a diferentes níveis de danos mecânicos, sementes do híbrido 'SWB551' Dow AgroSciences® foram classificadas em peneiras com crivos de diferentes tamanhos e formas (RG, RM1, RM2 e RP com crivos circulares de 8,7; 7,9; 7,1 e 6,4 mm de diâmetro, respectivamente, e CG, CM e CP com crivos oblongos com dimensões de 8,7 x 19,0, 7,9 x 19,0, 6,4 x 19,0 mm, respectivamente), submetidas a impactos contra uma placa metálica de maneira que fossem obtidos tratamentos com diferentes intensidades de danos mecânicos (0, 1, 3, 5 e 7 impactos) e armazenadas por 5 meses em ambiente com temperatura de 20ºC e 50-60% de umidade relativa do ar. Foi utilizado o delineamento inteiramente casualizado, com quatro repetições, perfazendo um fatorial 7 x 5 (7 peneiras x 5 intensidades de danos), totalizando 35 tratamentos. Foram realizadas as avaliações de teor de água das sementes, teste de danos mecânicos (tintura de iodo), teste de germinação, teste de frio e teste de sanidade. Foram evidenciadas variações nos níveis de incidência de patógenos entre as sementes de milho doce com diferentes tamanhos e formas. O aumento da intensidade dos danos mecânicos não favoreceu o aumento da incidência de patógenos nas sementes, mas reduziu o vigor das mesmas.

Estudo da viabilidade de métodos geoestatísticos na mensuração da variabilidade espacial da dureza da madeira de paraju (Manilkara sp)

Este trabalho objetivou determinar a viabilidade do uso da metodologia geoestatística na predição do padrão espacial da dureza, como propriedade mecânica da madeira de paraju (Manilkara sp). A peça de madeira apresentou as dimensões de 25,0 x 7,0 x 75,0 cm, correspondente a largura, espessura e comprimento, respectivamente. As duas faces da peça foram divididas em malhas regulares ("grid") de 2,5 x 2,5 cm composta de 9 linhas e 29 colunas, totalizando 261 compartimentos denominados células. A determinação da dureza da madeira foi realizada com base no método de Janka, com a carga aplicada no centro de cada célula. Os dados foram submetidos à análise estatística descritiva, geoestatística e interpolação por "krigagem". Os valores do coeficiente de variação apresentaram-se baixos. Observou-se uma dependência espacial para a dureza da madeira em ambas as faces, com maior alcance ocorrendo na face A da peça. Conclui-se que essa técnica tem aplicação prática no fornecimento de subsídios para retirada de amostras em peças de madeira, havendo, no entanto, necessidade de outros estudos.

Caracterização morfológica, viabilidade e vigor de sementes de Tabebuia chrysotricha (Mart. ex. DC.) Standal

A espécie Tabebuia chrysotricha ocorre desde o Nordeste até o Sul do Brasil, na floresta pluvial atlântica e em áreas de mata de galeria na região do Cerrado, sendo disseminada pelo Brasil através de sua utilização na arborização pública. Sua madeira é resistente, usada na construção civil, também produzindo matéria corante para tingir seda e algodão. Com os objetivos de caracterizar morfologicamente e analisar a viabilidade e vigor das sementes, quando colhidas em áreas de Cerrado, elas foram medidas e colocadas para germinar recém-colhidas e 30, 60 e 90 dias após o armazenamento em laboratório e em campo, sendo também submetidas ao teste do tetrazólio. As sementes mediram, em média, 27,8 x 7,2 x 0,3 mm (com alas) e 6,4 x 4,7 x 0,3 mm (sem alas), e seu peso médio foi de 0,40 g (com alas) e 0,31 g (sem alas). As sementes apresentaram maior porcentagem de germinação acumulada (66%) com 30 dias de armazenamento e maior estimativa de germinação a campo, quando semeadas na superfície e recém-colhidas. A viabilidade, medida através do teste de tetrazólio, apresentou resultados similares aos obtidos através do teste de germinação em laboratório, indicando ser este adequado para medir a viabilidade dessa espécie.