National Status and Trends Bioeffects Program: field methods

Environmental quality indicators provide resource managers with information useful to assess coastal condition and scientifically defensible decisions. Since 1984, the National Oceanic and Atmospheric Administration (NOAA), through its National Status and Trends (NS&T) Program, has provided environmental monitoring data on chemical, physical, and biological indicators of coastal environments. The program has two major monitoring components to meet its goals. The Bioeffects Assessments Program evaluates the health of bays, estuaries, and the coastal zone around the nation using the Sediment Quality Triad technique that includes measuring sediment contaminant concentrations, sediment toxicity and benthic community structure. The Mussel Watch Program is responsible for temporal coastal monitoring of contaminant concentrations by quantifying chemicals in bivalve mollusks. The NS&T Program is committed to providing the highest quality data to meet its statutory and scientific responsibilities. Data, metadata and information products are managed within the guidance protocols and standards set forth by NOAA’s Integrated Ocean Observing System (IOOS) and the National Monitoring Network, as recommended by the 2004 Ocean Action Plan. Thus, to meet these data requirements, quality assurance protocols have been an integral part of the NS&T Program since its inception. Documentation of sampling and analytical methods is an essential part of quality assurance practices. A step-by–step summary of the Bioeffects Program’s field standard operation procedures (SOP) are presented in this manual.

Status of the shrimp sector in Bangladesh in the context of HACCP and trade issues: a review

Shrimp culture in Bangladesh has emerged as an important aquaculture industry over the last three decades although its culture in greater parts of the farming area is done in traditional ways. In the meantime, the government of Bangladesh has taken necessary measures along with the private sectors to increase production, upgrade processing industries and to promote export performance. Long supply chain in raw material collection, inadequate infrastructure facilities, poor level of cool chain and lack of adequate HACCP-based training on hygiene and sanitation of different groups of people involved in the field level are the main problems of quality loss of raw materials. Shortage of raw materials results in poor capacity utilization of the processing plants. The growth of bagda (P. monodon) hatchery has expanded rapidly over the last few years, remaining mostly concentrated in Cox's Bazar region is enough to meet the target production. However, there is a shortage of pelleted shrimp feed in Bangladesh. A large number of export processors are now producing increasing amounts of value-added products such as individually quick-frozen, peeled and divined, butterfly cut shrimp, as well as cooked products. The export earnings from value added products is about half of the total export value. About 95% of total fish products are exported to European countries, USA and Japan and the remaining to the Southeast Asia and the Middle East. Most of the EU approved shrimp processing industries have been upgraded with laboratory facilities and provided HACCP training to their workers. As of now, HACCP is applied on the processing plants, but to ensure the quality of raw materials and to reduce risks, shrimp farms are also required to adopt HACCP plan. There is increased pressure time to time from importing countries for fish processors to establish effective quality assurance system in processing plants. Fish Inspection and Quality Control (FIQC) of the Department of Fisheries while having moderately equipped laboratories with chemical, bio-chemical and microbiological testing facilities and qualified technical personnel, the creation of facilities for testing of antibiotics is underway. FIQC mainly supervises quality aspects of the processing plants and has little or no control over raw material supply chains from farm to processing plants. Bangladesh export consignments sometimes face rejection due to reported poor quality of the products. Three types of barriers are reported for export of shrimp to EU countries. These are:(1) government participation in trade and restrictive practices (state aid, countervailing duties, state trading enterprises, government monopoly practices), customs and administrative entry procedures (anti-dumping duties, customs valuation, classification, formalities, rules of origin); (2) technical barriers to trade or TBT (technical regulations, standards, testing, certification arrangement); (3) specific limitations (quantitative restrictions, import licensing, embargoes, exchange control, discriminatory sourcing, export restraints, measures to regulate domestic prices, requirements concerning marking, labeling and packaging).

Concentrations of alkyphenol polyethoxylates entering UK estuaries

Concentrations of the weakly oestrogenic degradation products of alkylphenol polyethoxylate (APE) surfactants (nonylphenol, octylphenol, nonylphenol monoethoxylate and nonylphenol diethoxylate) were measured in water and sediments from British rivers and estuaries collected during 1994 and 1995. In addition, a series of samples of tissues of wild fish from the River Aire, and from a laboratory dosing experiment were analysed for alkylphenols, to assess the degree of bioaccumulation of these compounds. Measurable concentrations of APE residues were recorded in the River Aire (15–76 μg/l total extractable alkylphenols), the River Mersey (6–11 μg/l) and the Tees estuary (up to 76 μg/l). These levels exceed, or are close to, the no observed effect concentration for the induction of vitellogenesis in caged trout (5–20 μg/l total extractable alkylphenols), and may be sufficient to exert an oestrogenic effect on fish populations in these areas. A sediment sample from Bingley on the River Aire contained 15 μg/g (dry weight) nonylphenol, and concentrations in sediments from the Tees and Mersey estuaries exceeded 1 μg/g. These rivers receive a variety of trade waters via sewage treatment works (STW) effluents containing significant concentrations of APE. Elsewhere, concentrations in water and sediments were near or below limits of detection and biological effects are unlikely, suggesting that any oestrogenic effects observed in sewage outfalls and rivers not directly impacted by APE-containing trade-waters may be caused by other chemicals. Analysis of samples of trout muscle taken from a tank dosed at 65 μg/l nonylphenol indicated a bioaccumulation factor of between 90 and 125 after 3 weeks exposure. Samples of wild fish from the River Aire contained up to 0.8 μg/g nonylphenol in the muscle, a tissue bioaccumulation factor of approximately 50 relative to measured concentrations in water samples. A series of fish samples taken from offshore for food quality assurance purposes contained no detectable levels of APE residues (0.05–0.1 μg/g nonylphenol).

The statistic inversion algorithms of water constituents for the Huanghai Sea and the East China Sea

A group of statistical algorithms are proposed for the inversion of the three major components of Case-H waters in the coastal area of the Huanghai Sea and the East China Sea. The algorithms are based on the in situ data collected in the spring of 2003 with strict quality assurance according to NASA ocean bio-optic protocols. These algorithms are the first ones with quantitative confidence that can be applied for the area. The average relative error of the inversed and in situ measured components' concentrations are: Chl-a about 37%, total suspended matter (TSM) about 25%, respectively. This preliminary result is quite satisfactory for Case-H waters, although some aspects in the model need further study. The sensitivity of the input error of 5% to remote sensing reflectance (Rrs) is also analyzed and it shows the algorithms are quite stable. The algorithms show a large difference with Tassan's local SeaWiFS algorithms for different waters, except for the Chl-a algorithm.

Curriculum: directions, decisions and debate.

The purpose of this paper is to provide an overview of the factors which may effect, stimulate or be the cause of curriculum changes in higher education (HE) in Scotland. This overview leads to a series of questions which could be used to encourage debate within and across institutions on strategic developments, which may enhance and inform the development of and support for the curriculum. The paper will begin by offering a definition of the term 'curriculum' before identifying the current areas of influence on how the curriculum, in its broadest sense, is shaped and delivered. This paper will provide an outline of some of the different approaches to the design and delivery of the curriculum which enhance the student experience in Scottish higher education, but which will of course have a wider relevance to HE in the UK and perhaps beyond.

Building effectiveness communication ratios (BECs): an integrated ‘life-cycle’ methodology for mitigating energy-use in buildings

Current building regulations are generally prescriptive in nature. It is widely accepted in Europe that this form of building regulation is stifling technological innovation and leading to inadequate energy efficiency in the building stock. This has increased the motivation to move design practices towards a more ‘performance-based’ model in order to mitigate inflated levels of energy-use consumed by the building stock. A performance based model assesses the interaction of all building elements and the resulting impact on holistic building energy-use. However, this is a nebulous task due to building energy-use being affected by a myriad of heterogeneous agents. Accordingly, it is imperative that appropriate methods, tools and technologies are employed for energy prediction, measurement and evaluation throughout the project’s life cycle. This research also considers that it is imperative that the data is universally accessible by all stakeholders. The use of a centrally based product model for exchange of building information is explored. This research describes the development and implementation of a new building energy-use performance assessment methodology. Termed the Building Effectiveness Communications ratios (BECs) methodology, this performance-based framework is capable of translating complex definitions of sustainability for energy efficiency and depicting universally understandable views at all stage of the Building Life Cycle (BLC) to the project’s stakeholders. The enabling yardsticks of building energy-use performance, termed Ir and Pr, provide continuous design and operations feedback in order to aid the building’s decision makers. Utilised effectively, the methodology is capable of delivering quality assurance throughout the BLC by providing project teams with quantitative measurement of energy efficiency. Armed with these superior enabling tools for project stakeholder communication, it is envisaged that project teams will be better placed to augment a knowledge base and generate more efficient additions to the building stock.

Tropospheric aerosol detection over Southern Ireland using a backscatter Raman lidar

Lidar is an optical remote sensing instrument that can measure atmospheric parameters. A Raman lidar instrument (UCLID) was established at University College Cork to contribute to the European lidar network, EARLINET. System performance tests were carried out to ensure strict data quality assurance for submission to the EARLINET database. Procedures include: overlap correction, telecover test, Rayleigh test and zero bin test. Raman backscatter coefficients, extinction coefficients and lidar ratio were measured from April 2010 to May 2011 and February 2012 to June 2012. Statistical analysis of the profiles over these periods provided new information about the typical atmospheric scenarios over Southern Ireland in terms of aerosol load in the lower troposphere, the planetary boundary layer (PBL) height, aerosol optical density (AOD) at 532 nm and lidar ratio values. The arithmetic average of the PBL height was found to be 608 ± 138 m with a median of 615 m, while average AOD at 532 nm for clean marine air masses was 0.119 ± 0.023 and for polluted air masses was 0.170 ± 0.036. The lidar ratio showed a seasonal dependence with lower values found in winter and autumn (20 ± 5 sr) and higher during spring and winter (30 ± 12 sr). Detection of volcanic particles from the eruption of the volcano Eyjafjallajökull in Iceland was measured between 21 April and 7 May 2010. The backscatter coefficient of the ash layer varied between 2.5 Mm-1sr-1 and 3.5 Mm-1sr-1, and estimation of the AOD at 532 nm was found to be between 0.090 and 0.215. Several aerosol loads due to Saharan dust particles were detected in Spring 2011 and 2012. Lidar ratio of the dust layers were determine to be between 45 and 77 sr and AOD at 532 nm during the dust events range between 0.84 to 0.494.

Monte Carlo Analysis and Physics Characterization of a Novel Nanoparticle Detector for Medical and Micro-dosimetry Applications

The outcomes for both (i) radiation therapy and (ii) preclinical small animal radio- biology studies are dependent on the delivery of a known quantity of radiation to a specific and intentional location. Adverse effects can result from these procedures if the dose to the target is too high or low, and can also result from an incorrect spatial distribution in which nearby normal healthy tissue can be undesirably damaged by poor radiation delivery techniques. Thus, in mice and humans alike, the spatial dose distributions from radiation sources should be well characterized in terms of the absolute dose quantity, and with pin-point accuracy. When dealing with the steep spatial dose gradients consequential to either (i) high dose rate (HDR) brachytherapy or (ii) within the small organs and tissue inhomogeneities of mice, obtaining accurate and highly precise dose results can be very challenging, considering commercially available radiation detection tools, such as ion chambers, are often too large for in-vivo use.

In this dissertation two tools are developed and applied for both clinical and preclinical radiation measurement. The first tool is a novel radiation detector for acquiring physical measurements, fabricated from an inorganic nano-crystalline scintillator that has been fixed on an optical fiber terminus. This dosimeter allows for the measurement of point doses to sub-millimeter resolution, and has the ability to be placed in-vivo in humans and small animals. Real-time data is displayed to the user to provide instant quality assurance and dose-rate information. The second tool utilizes an open source Monte Carlo particle transport code, and was applied for small animal dosimetry studies to calculate organ doses and recommend new techniques of dose prescription in mice, as well as to characterize dose to the murine bone marrow compartment with micron-scale resolution.

Hardware design changes were implemented to reduce the overall fiber diameter to <0.9 mm for the nano-crystalline scintillator based fiber optic detector (NanoFOD) system. Lower limits of device sensitivity were found to be approximately 0.05 cGy/s. Herein, this detector was demonstrated to perform quality assurance of clinical 192Ir HDR brachytherapy procedures, providing comparable dose measurements as thermo-luminescent dosimeters and accuracy within 20% of the treatment planning software (TPS) for 27 treatments conducted, with an inter-quartile range ratio to the TPS dose value of (1.02-0.94=0.08). After removing contaminant signals (Cerenkov and diode background), calibration of the detector enabled accurate dose measurements for vaginal applicator brachytherapy procedures. For 192Ir use, energy response changed by a factor of 2.25 over the SDD values of 3 to 9 cm; however a cap made of 0.2 mm thickness silver reduced energy dependence to a factor of 1.25 over the same SDD range, but had the consequence of reducing overall sensitivity by 33%.

For preclinical measurements, dose accuracy of the NanoFOD was within 1.3% of MOSFET measured dose values in a cylindrical mouse phantom at 225 kV for x-ray irradiation at angles of 0, 90, 180, and 270˝. The NanoFOD exhibited small changes in angular sensitivity, with a coefficient of variation (COV) of 3.6% at 120 kV and 1% at 225 kV. When the NanoFOD was placed alongside a MOSFET in the liver of a sacrificed mouse and treatment was delivered at 225 kV with 0.3 mm Cu filter, the dose difference was only 1.09% with use of the 4x4 cm collimator, and -0.03% with no collimation. Additionally, the NanoFOD utilized a scintillator of 11 µm thickness to measure small x-ray fields for microbeam radiation therapy (MRT) applications, and achieved 2.7% dose accuracy of the microbeam peak in comparison to radiochromic film. Modest differences between the full-width at half maximum measured lateral dimension of the MRT system were observed between the NanoFOD (420 µm) and radiochromic film (320 µm), but these differences have been explained mostly as an artifact due to the geometry used and volumetric effects in the scintillator material. Characterization of the energy dependence for the yttrium-oxide based scintillator material was performed in the range of 40-320 kV (2 mm Al filtration), and the maximum device sensitivity was achieved at 100 kV. Tissue maximum ratio data measurements were carried out on a small animal x-ray irradiator system at 320 kV and demonstrated an average difference of 0.9% as compared to a MOSFET dosimeter in the range of 2.5 to 33 cm depth in tissue equivalent plastic blocks. Irradiation of the NanoFOD fiber and scintillator material on a 137Cs gamma irradiator to 1600 Gy did not produce any measurable change in light output, suggesting that the NanoFOD system may be re-used without the need for replacement or recalibration over its lifetime.

For small animal irradiator systems, researchers can deliver a given dose to a target organ by controlling exposure time. Currently, researchers calculate this exposure time by dividing the total dose that they wish to deliver by a single provided dose rate value. This method is independent of the target organ. Studies conducted here used Monte Carlo particle transport codes to justify a new method of dose prescription in mice, that considers organ specific doses. Monte Carlo simulations were performed in the Geant4 Application for Tomographic Emission (GATE) toolkit using a MOBY mouse whole-body phantom. The non-homogeneous phantom was comprised of 256x256x800 voxels of size 0.145x0.145x0.145 mm3. Differences of up to 20-30% in dose to soft-tissue target organs was demonstrated, and methods for alleviating these errors were suggested during whole body radiation of mice by utilizing organ specific and x-ray tube filter specific dose rates for all irradiations.

Monte Carlo analysis was used on 1 µm resolution CT images of a mouse femur and a mouse vertebra to calculate the dose gradients within the bone marrow (BM) compartment of mice based on different radiation beam qualities relevant to x-ray and isotope type irradiators. Results and findings indicated that soft x-ray beams (160 kV at 0.62 mm Cu HVL and 320 kV at 1 mm Cu HVL) lead to substantially higher dose to BM within close proximity to mineral bone (within about 60 µm) as compared to hard x-ray beams (320 kV at 4 mm Cu HVL) and isotope based gamma irradiators (137Cs). The average dose increases to the BM in the vertebra for these four aforementioned radiation beam qualities were found to be 31%, 17%, 8%, and 1%, respectively. Both in-vitro and in-vivo experimental studies confirmed these simulation results, demonstrating that the 320 kV, 1 mm Cu HVL beam caused statistically significant increased killing to the BM cells at 6 Gy dose levels in comparison to both the 320 kV, 4 mm Cu HVL and the 662 keV, 137Cs beams.

Innovative bibliometrische Verfahren zur kontinuierlichen Beobachtung der sozial-wissenschaftlichen Forschungsproduktion

Bei diesem Bericht handelt es sich um den Abschlussbericht des Projekts „Innovative bibliometrische Verfahren zur kontinuierlichen Beobachtung der sozialwissenschaftlichen Forschungsproduktion“, das vom 1.9.2007 bis 31.3.2010 am Deutschen Institut für Internationale Pädagogische Forschung durchgeführt und von der Deutschen Forschungsgemeinschaft … gefördert wurde. [Das Projekt hat] die Zielsetzung, die instrumentellen Voraussetzungen für Maßnahmen der Evaluation, Qualitätssicherung und Transparenzerzeugung von Forschungsleistungen in der Erziehungswissenschaft zu verbessern. Dies soll durch eine Weiterentwicklung des Informationssystems FIS Bildung Literaturdatenbank erreicht werden. Die übergeordnete Zielsetzung lässt sich wiederum in die Teilziele „Qualitätssicherung“, „Relevanzbewertung“ und „Analyse des Forschungsdiskurses“ untergliedern. Das Ziel der Qualitätssicherung richtet sich auf den Erfassungsgrad wissenschaftlich relevanter Literatur in der FIS Bildung Literaturdatenbank. Als Grundlage für die anderen Ziele ist die Gewährleistung, dass relevante wissenschaftliche Fachliteratur für die verschiedenen erziehungswissenschaftlichen Subdisziplinen erfasst und in der Datenbank repräsentiert ist, entscheidend. Das Ziel der Relevanzbewertung fokussiert auf die Etablierung eines Verfahrens zur qualitativen Kategorisierung von Publikationen. Hierzu wird die Entwicklung eines multiattributiv ermittelten skalierbaren Indikators „Wissenschaftliche Relevanz“ angestrebt. Das Ziel der Analyse des Forschungsdiskurses in der Erziehungswissenschaft konzentriert sich auf die Identifizierung thematischer Felder, ihrer Bezüge und Entwicklungen im Zeitverlauf (Monitoring). (DIPF/Orig.)

When the shift hits the critical fan: a Foucauldian analysis

In the past 15 years in the UK, the state has acquired powers, which mark a qualitative shift in its relationship to higher education. Since the introduction and implementation of the Further and Higher Education Act 1992, the Teaching and Higher Education Act 1998 and the Higher Education Act 2004, a whole raft of changes have occurred which include the following: Widening participation; the development of interdisciplinary, experiential and workplace-based learning focused on a theory-practice dialogue; quality assurance; and new funding models which encompass public and private partnerships. The transformation of higher education can be placed in the context of New Labour’s overall strategies for overarching reform of public services, as set out in the Prime Minister’s Strategy Unit’s discussion paper The UK Government’s Approach to Public Service Reform (2006). An optimistic view of changes to higher education is that they simultaneously obey democratic and economic imperatives. There is an avowed commitment through the widening participation agenda to social inclusion and citizenship, and to providing the changing skills base necessary for the global economy. A more cynical view is that, when put under critical scrutiny, as well as being emancipatory, in some senses these changes can be seen to mobilise regulatory and disciplinary practices. This paper reflects on what kinds of teaching and learning are promoted by the new relationship between the state and the university. It argues that, whilst governmental directives for innovations and transformations in teaching and learning allegedly empower students and put their interests at the centre, reforms can also be seen to consist of supervisory and controlling mechanisms with regard both to our own practices as teachers and the knowledge/ learning we provide for the students.

Two Birds, One Stone: Combining Student Assessment and Socio-Legal Research

We describe here a method of assessment for students. A number of short-comings of traditional assessment methods, especially essays and examinations, are discussed and an alternative assessment method, the student project, is suggested. The method aims not just to overcome the short-comings of more traditional methods, but also to provide over-worked and under-resourced academics with viable primary data for socio-legal research work. Limitations to the method are discussed, with proposals for minimising the impact of these limitations. The whole �student project� approach is also discussed with reference to the Quality Assurance Agency benchmark standards for law degrees, standards which are expected of all institutions in the UK.

El razonamiento moral como elemento constitutivo de la competencia ética: dilemas reales e hipotéticos en profesores de educación secundaria en México

El objetivo del presente texto es la indagación del razonamiento moral en los profesores de secundaria como un elemento de la competencia ética. Se realizó con dilemas morales hipotéticos (analizados y probados previamente para su validación y cuya fiabilidad se obtuvo a través del alfa de Cronbach) y con dilemas reales. Se aplicó a 264 profesores, miembros de la comunidad académica de la Escuela Normal Superior de Michoacán, México. Se analizó a través del programa estadístico Aquad 6. Entre los descubrimientos se encuentra una presencia mayoritaria de conflictos entre las normas éticas interpersonales con las normas de conformidad social y con las normas institucionales particulares. También que la justicia y la protección contra daños a los alumnos son valores presentes en los dilemas reales y una prevalencia en el razonamiento convencional de los profesores