Alumiinin oksidikerroksen merkitys hitsauksessa

Tämä kandidaatintyö on kirjallisuuden pohjalta laadittu yhteenveto alumiinin oksidikerroksen vaikutuksesta hitsauksessa. Työssä käsitellään alumiinia alkuaineena, alumiinin oksidikerroksen muodostumista ja rakennetta, seosaineiden vaikutusta oksidikerrokseen, alumiinin hitsattavuutta teräkseen vertaillen, alumiiniseosten hitsattavuutta, oksidikerroksen merkitystä hitsauksessa, alumiinin yleisiä hitsausvirheitä, oksidikerroksen poistotapoja sekä alumiinin eri hitsausmenetelmiä. Hitsausmenetelmistä käsitellään pääasiassa alumiinin MIG-, TIG- ja plasmahitsausta.

Paineventtiilien hitsauksen laadunhallinnan kehittäminen

Diplomityössä tarkastellaan keinoja Temet Oy:n valmistamien paineventtiilien hitsauksen laadunhallinnan kehittämiseen. Työn avulla hitsauksen laadunhallinta on tarkoitus saada vastaamaan paremmin yrityksen asiakkaiden vaatimuksia sekä samalla parantaa yrityksen kilpailukykyä. Työn alkupuolella perehdytään laatuun ja laadunhallintaan, erityisesti hitsauksen näkökulmasta. Lisäksi tutustutaan laadunhallinnan työkaluihin, ISO 9001- ja ISO 3834 -standardeihin sekä tarkemmin jälkimmäisen vaatimuksiin. Lisäksi työhön sisältyy kahden erityyppisen paineventtiilin hitseille tehtävä makrohietutkimus. Työssä haetaan myös paineventtiilien valmistukselle vaatimuksia antavia viranomaismääräyksiä tai standardeja. Oleellinen osa hitsauksen laadunhallinnan kehitystyötä on yrityksen hitsaustoiminnan nykytilanteen kartoittaminen ja tarvittavien kehitystoimien suunnittelu tehtyihin selvityksiin perustuen. Työn valmistuttua yrityksellä on ehdotus siitä, miten toteuttaa ISO 3834-2 kattavien laatuvaatimusten mukaisen hitsauksen laadunhallintajärjestelmä paineventtiilien hitsaukseen. Yrityksellä on myös laadunhallintajärjestelmän kannalta oleelliset asiakirjat ja ehdotus siitä, miten hitsauksen laadunhallinnan kehitystyötä kannattaisi tulevaisuudessa jatkaa.

Robottihitsauksen toimintojen kehittäminen hitsaustuotannossa

Tämän diplomityön tarkoituksena oli kehittää robottihitsauksen toimintoja KKR Steel Oy:ssä. Tärkeimmät tutkimuskohteet olivat robottisolujen toiminnan tehostaminen ja uusien robottihitsaukseen sopivien tuotteiden kartoittaminen. Työ on jaettu teoreettiseen ja käytännön osuuteen. Teoriaosassa perehdytään kirjallisuuskatsauksen kautta robottihitsauksen perusteisiin, hitsauksen robotisointiin sekä tuottavuuteen ja laatuun. Robottihitsauksen osuudessa käsitellään hitsausrobotin rakennetta, siihen liittyviä oheislaitteita ja robottien ohjelmointia. Hitsauksen robotisoinnissa selvitetään syitä robottihitsauksen käyttöönotolle, robotisoitavilta tuotteilta vaadittavia ominaisuuksia sekä erilaisia toimenpiteitä robottiaseman toiminnan tehostamiseksi. Tuottavuuteen liittyvässä osuudessa selvitetään erilaisten laskentakaavojen ja tunnuslukujen käyttöä ja merkitystä hitsauksessa. Käytännön osuudessa kartoitettiin yrityksen robottihitsauksen lähtötilanne ja selvitettiin ongelmakohtien perusteella kehittämistoimenpiteitä. Tutkimuksissa seurattiin ja havainnoitiin hitsaustuotannon eri vaiheita, minkä perusteella laadittiin erilaisia parannuskeinoja. Toimenpiteistä saatavan hyödyn arviointiin käytettiin yrityksen tuotantoon sopivia mittareita kuten läpimenoaikaa ja kaariaikasuhdetta. Havaittujen ongelmakohtien perusteella ryhdyttiin kehittämään hitsauskiinnittimien suunnittelua ja käsittelylaitteiden käyttöä hitsaustuotannossa sekä hyödyntämään etäohjelmointia tuotteiden viennissä robottiasemille. Lisäksi robottiasemien käyttöastetta pyrittiin nostamaan tutkimalla käsinhitsattavia tuotteita ja siirtämällä niistä robotille soveltuvimmat robottiasemille hitsattavaksi.

Dissection du programme développemental du noyau paraventriculaire de l'hypothalamus.

Une cascade de facteurs de transcription composée de SIM1, ARNT2, OTP, BRN2 et SIM2 est requise pour la différenciation des cinq types cellulaires qui peuplent le noyau paraventriculaire (PVN) de l’hypothalamus, un régulateur critique de plusieurs processus physiologiques essentiels à la survie. De plus, l’haploinsuffisance de Sim1 est aussi une cause d’hyperphagie isolée chez la souris et chez l’homme. Nous désirons disséquer le programme développemental du PVN, via une approche intégrative, afin d’identifier de nouveaux gènes qui ont le potentiel de réguler l’homéostasie chez l’individu adulte. Premièrement, nous avons utilisé une approche incluant l’analyse du transcriptome du PVN à différents stades du développement de la souris pour identifier de tels gènes. Nous avons comparé les transcriptomes de l’hypothalamus antérieur chez des embryons de souris Sim1+/+ et Sim1-/- à E12.5 issus de la même portée. De cette manière, nous avons identifié 56 gènes agissant en aval de Sim1 dont 5 facteurs de transcription - Irx3, Sax1, Rxrg, Ror et Neurod6. Nous avons également proposé un modèle de développement à deux couches de l’hypothalamus antérieur. Selon ce modèle, les gènes qui occupent un domaine médial dans la zone du manteau caractérisent des cellules qui peupleront le PVN alors que les gènes qui ont une expression latérale identifient des cellules qui donneront plus tard naissance aux structures ventrolatérales de l’hypothalamus. Nous avons aussi démontré que Sim1 est impliqué à la fois dans la différenciation, la migration et la prolifération des neurones qui peuplent le PVN tout comme Otp. Nous avons également isolé par microdissection au laser le PVN et l’hypothalamus médiobasal chez des souris de type sauvage à E14.5 pour en comparer les transcriptomes. Ceci nous a permis d’identifier 34 facteurs de transcription spécifiques au PVN et 76 facteurs spécifiques à l’hypothalamus médiobasal. Ces gènes représentent des régulateurs potentiels du développement hypothalamique. Deuxièmement, nous avons identifié 3 blocs de séquences au sein de la région 5’ d’Otp qui sont conservés chez l’homme, la souris et le poisson. Nous avons construit un transgène qui est composé d’un fragment de 7 kb contenant ces blocs de séquences et d’un gène rapporteur. L’analyse de 4 lignées de souris a montré que ce transgène est uniquement exprimé dans le PVN en développement. Nous avons généré un deuxième transgène dans lequel le fragment de 7 kb est inséré en amont de l’ADNc de Brn2 ou Sim1 et de Gfp. Nous avons obtenu quatre lignées de souris dans lesquels le profil d’expression de Brn2 et de Gfp reproduit celui d’Otp. Nous étudierons le développement du PVN et la prise alimentaire chez ces souris. En parallèle, nous croisons ces lignées avec les souris déficientes en Sim1 pour déterminer si l’expression de Brn2 permet le développement des cellules du PVN en absence de Sim1. En résumé, nous avons généré le premier transgène qui est exprimé spécifiquement dans le PVN. Ce transgène constitue un outil critique pour la dissection du programme développemental de l’hypothalamus. Troisièmement, nous avons caractérisé le développement de l’hypothalamus antérieur chez l’embryon de poulet qui représente un modèle intéressant pour réaliser des études de perte et de gain de fonction au cours du développement de cette structure. Il faut souligner que le modèle de développement à deux couches de l’hypothalamus antérieur semble être conservé chez l’embryon de poulet où il est aussi possible de classer les gènes selon leur profil d’expression médio-latéral et le devenir des régions qu’ils définissent. Finalement, nous croyons que cette approche intégrative nous permettra d’identifier et de caractériser des régulateurs du développement du PVN qui pourront potentiellement être associés à des pathologies chez l’adulte telles que l’obésité ou l’hypertension.

Single-Feed Dual-Band Circularly Polarised Microstrip Antenna

A novel technique for obtaining dual-hand circular polarization (CP) radiation of a single-feed circular microstrip antenna in proposed and demonstrated. By embedding two pain of arc shaped slots of proper lengths close to the boundary of a circular patch, and protruding one of the arc-shaped slots with a narrow slit, the circular microstrip antenna can perform dual-hand CP radiation using a single probe feed. Details of the antenna design

A System for Offline Recognition of Handwritten Characters in Malayalam Script

In this paper, we propose a handwritten character recognition system for Malayalam language. The feature extraction phase consists of gradient and curvature calculation and dimensionality reduction using Principal Component Analysis. Directional information from the arc tangent of gradient is used as gradient feature. Strength of gradient in curvature direction is used as the curvature feature. The proposed system uses a combination of gradient and curvature feature in reduced dimension as the feature vector. For classification, discriminative power of Support Vector Machine (SVM) is evaluated. The results reveal that SVM with Radial Basis Function (RBF) kernel yield the best performance with 96.28% and 97.96% of accuracy in two different datasets. This is the highest accuracy ever reported on these datasets

Major-elements trends in cenozoic volcanites of Hungary

Hungary lies entirely within the Carpatho-Pannonian Region (CPR), a dominant tectonic unit of eastern Central Europe. The CPR consists of the Pannonian Basin system, and the arc of the Carpathian Mountains surrounding the lowlands in the north, east, and southeast. In the west, the CPR is bounded by the Eastern Alps, whereas in the south, by the Dinaridic belt. (...)

A twenty-year independent record of sea surface temperature for climate from Along-track Scanning Radiometers

A new record of sea surface temperature (SST) for climate applications is described. This record provides independent corroboration of global variations estimated from SST measurements made in situ. Infrared imagery from Along-Track Scanning Radiometers (ATSRs) is used to create a 20 year time series of SST at 0.1° latitude-longitude resolution, in the ATSR Reprocessing for Climate (ARC) project. A very high degree of independence of in situ measurements is achieved via physics-based techniques. Skin SST and SST estimated for 20 cm depth are provided, with grid cell uncertainty estimates. Comparison with in situ data sets establishes that ARC SSTs generally have bias of order 0.1 K or smaller. The precision of the ARC SSTs is 0.14 K during 2003 to 2009, from three-way error analysis. Over the period 1994 to 2010, ARC SSTs are stable, with better than 95% confidence, to within 0.005 K yr−1(demonstrated for tropical regions). The data set appears useful for cleanly quantifying interannual variability in SST and major SST anomalies. The ARC SST global anomaly time series is compared to the in situ-based Hadley Centre SST data set version 3 (HadSST3). Within known uncertainties in bias adjustments applied to in situ measurements, the independent ARC record and HadSST3 present the same variations in global marine temperature since 1996. Since the in situ observing system evolved significantly in its mix of measurement platforms and techniques over this period, ARC SSTs provide an important corroboration that HadSST3 accurately represents recent variability and change in this essential climate variable.

Cusp ion steps, field-aligned currents and poleward moving auroral forms

We predict the field-aligned currents around cusp ion steps produced by pulsed reconnection between the geomagnetic field and an interplanetary magnetic field (IMF) with a B-Y component that is large in magnitude. For B-Y > 0, patches of newly opened flux move westward and eastward in the Northern and Southern Hemispheres, respectively, under the influence of the magnetic curvature force. These flow directions are reversed for B-Y < 0. The speed of this longitudinal motion initially grows with elapsed time since reconnection, but then decays as the newly opened field lines straighten. We predict sheets of field-aligned current on the boundaries between the patches produced by successive reconnection pulses, associated with the difference in the speeds of their longitudinal motion. For low elapsed times since reconnection, near the equatorward edge of the cusp region where the field lines are accelerating, the field-aligned current sheets will be downward or upward in both hemispheres for positive or negative IMF B-Y, respectively. At larger elapsed times since reconnection, as events slow and evolve from the cusp into the mantle region, these field-aligned current directions will be reversed. Observations by the Polar spacecraft on August 26,1998, show the predicted upward current sheets at steps seen in the mantle region for IMF B-Y > 0. Mapped into the ionosphere, the steps coincide with poleward moving events seen by the CUTLASS HF radar. The mapped location of the largest step also coincides with a poleward moving arc seen by the UVI imager on Polar. We show that the arc is consistent with a region of upward field-aligned current that has become unstable, such that a potential drop of about 1 kV formed below the spacecraft. The importance of these observations is that they confirm that the poleward moving events, as seen by the HF radar and the UV imager, are due to pulsed magnetopause reconnection. Milan et al. [2000] noted that the great longitudinal extent of these events means that the required reconnection pulses would have contributed almost all the voltage placed across the magnetosphere at this time. The observations also show that auroral arcs can form on open field lines in response to the pulsed application of voltage at the magnetopause.

Incoherent scatter radar observations related to magnetospheric dynamics

Over the past decade incoherent scatter radars have provided fundamental observations of velocities and plasma parameters in the high-latitude ionosphere which relate to the dynamical processes responsible for the excitation of flow in the coupled solar wind-magnetosphere-ionosphere system. These observations have played a central role in inspiring a change of paradigm from a picture of quasi-steady flows parameterised by the direction of the interplanetary magnetic field to a picture of inherently time-dependent flows driven by coupling processes at the magnetopause and in the tail. Flows and particle precipitation in the dayside ionosphere are reasonably well understood in principle in terms of the effects of time-dependent reconnection at the magnetopause, though coordinated high- and low-altitude observations are lacking. Related phenomena also appear to occur in the tail, forming the “equatorward-drifting arcs” which are present during quiet times, as well as during the growth and early expansion phases of substorms. At expansion onset, the substorm bulge forms well equatorward of the arc formation region, and may take ∼ 10 min or more to reach it in its poleward expansion. Nightside ionospheric flows are then considerably perturbed by the effects of strong precipitation-induced conductivity gradients.

EISCAT/CRRES observations: nightside ionospheric ion outflow and oxygen-rich substorm injections

We present combined observations made near midnight by the EISCAT radar, all-sky cameras and the combined released and radiation efects satellite (CRRES) shortly before and during a substorm. In particular, we study a discrete, equatorward-drifting auroral arc, seen several degrees poleward of the onset region. The arc passes through the field-aligned beam of the EISCAT radar and is seen to be associated with a considerable upflow of ionospheric plasma. During the substorm, the CRRES satellite observed two major injections, 17 min apart, the second of which was dominated by O+ ions. We show that the observed are was in a suitable location in both latitude and MLT to have fed O+ ions into the second injection and that the upward flux of ions associated with it was sufficient to explain the observed injection. We interpret these data as showing that arcs in the nightside plasma-sheet boundary layer could be the source of O+ ions energised by a dipolarisation of the mid- and near-Earth tail, as opposed to ions ejected from the dayside ionosphere in the cleft ion fountain.

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Análise não-linear de treliças pelo método dos elementos finitos posicional

This work presents the positional nonlinear geometric formulation for trusses using different strain measures. The positional formulation presents an alternative approach for nonlinear problems. This formulation considers nodal positions as variables of the nonlinear system instead of displacements (widely found in literature). The work also describes the arc-length method used for tracing equilibrium paths with snap-through and snap-back. Numerical applications for trusses already established in the literature and comparisons with other studies are provided to prove the accuracy of the proposed formulation

Resistance of stored bean varieties to Acanthoscelides obtectus (Coleoptera : Bruchidae)

During bean seed storage, yield can be lost due to infestations of Acanthoscelides obtectus Say, the bean weevil. The use of resistant varieties has shown promising results in fighting these insects, reducing infestation levels and eliminating chemical residues from the beans. The expression of resistance to A. obtectus in bean varieties is frequently attributed to the presence of phytohemagglutinins, protease inhibitors and alpha-amylase, and especially to variants of the protein arcelin, which reduce the larval viability of these insects. To evaluate the effect of bean seed storage time on the resistance expression of bean varieties to A. obtectus, tests with seeds of three ages (freshly-harvested, 4-month-old, and 8-month-old) were conducted in the laboratory, using four commercial varieties: Carioca Pitoco, Ipa 6, Porrillo 70, Onix; four improved varieties containing arcelin protein: Are. 1, Arc.2, Arc. 3, Arc.4; and three wild varieties also containing arcelin protein: Arc. IS, Arc.3S, and Arc. 5S. The Arc.5S, Arc. IS, and Arc.2 varieties expressed high antibiosis levels against the weevil; Arc. I and Arc3S expressed the same mechanism, but at lower levels. The occurrence of oviposition non-preference was also observed in Arc.5S and Arc. IS. The Arc.3 and Arc. 4 varieties expressed low feeding non-preference levels against A. obtectus. The expression of resistance in arcelin-bearing, wild or improved varieties was affected during the storage of seeds, and was high under some parameters but low in others. The results showed that addition of chemical resistance factors such as protein arcelin via genetic breeding may be beneficial in improving the performance of bean crops.