Processo de criação de estratégia em pequenas empresas de base tecnológica: um modelo de fases evolutivas para o setor médico-odontológico

O objetivo do trabalho foi o de estudar o processo estratégico, testar algumas hipóteses acerca desse processo e propor modelos explicativos para a criação de estratégia em pequenas empresas de base tecnológica. A estratégia empresarial é uma área de significativa importância para os estudos administrativos, tendo em vista o impacto das decisões e ações estratégicas para o sucesso das empresas. Além disso, a teoria sobre estratégia está fortemente fundamentada em estudos realizados em empresas de grande porte, maduras, podendo, portanto, apresentar viés quando considerada a sua aplicação em empresas de pequeno porte e empresas em fase de desenvolvimento. Este estudo analisou os processos de criação de estratégias e propôs um conjunto de modelos representativos desses processos para pequenas empresas de base tecnológica criadas sem a formalização de planos de negócios, o que foi muito comum no início dos polos tecnológicos brasileiros na década de 80. Foi realizado um trabalho de campo cuja natureza foi a de pesquisa aplicada. O procedimento técnico utilizado foi o estudo multicasos, sendo investigadas cinco empresas de pequeno e uma de médio porte, conforme classificação pelo número de empregados, todas de base tecnológica e localizadas no Polo Tecnológico de São Carlos, em São Carlos, SP. O resultado da pesquisa evidenciou que as estratégias são criadas por etapas distintas, o que permitiu a construção de um conjunto de modelos representativos do processo de criação de estratégias, além de confirmar algumas hipóteses formuladas, podendo destacar que a ausência de formalização de planos de negócios não impediu o sucesso das empresas estudadas.

Cooperação com empresas de base tecnológica: pesquisa-ação no setor elétrico

A pressão por inovação em empresas de base tecnológica, em ciclos cada vez mais curtos e demandando competências complexas, tem levado as empresas à busca de uma estruturação sob a forma de redes de cooperação empresarial, a fim de mitigar riscos e reduzir custos enquanto acelera o time to market. Entretanto, apesar de todas as vantagens e oportunidades reais, há grandes barreiras a serem transpostas. O objetivo dessa pesquisa é compreender o processo de estruturação de uma rede de cooperação no contexto de empresas de base tecnológica. A abordagem metodológica utilizada foi a pesquisa-ação desenvolvida em 30 empresas do setor eletroeletrônico. Os resultados apontam o temor ao comportamento oportunista como o item mais crítico à formação da rede de cooperação empresarial.

Processos dependentes de informação em empresas incubadas e graduadas de base tecnológica: um estudo comparativo de casos

A competitividade, atualmente, introduz novos comportamentos e leva empresas a uma situação de desconforto e, muitas vezes, a não adaptação às exigências ambientais. Percebe-se um crescente número de desafios associados com o controle de informação em organizações com atividades de engenharia, em particular os volumes crescentes de informação de natureza continuamente mutável. Pode-se afirmar que o desempenho inovador de uma organização é diretamente proporcional a sua capacidade de gerenciar informações. Desta forma, a importância da gestão da informação é reconhecida em detrimento da procura de meios mais competentes para atender demandas atuais. O artigo teve como propósito analisar doze processos dependentes de informação em empresas de base tecnológica, através das principais fases do processo de gerenciamento da informação. Optou-se pelo emprego do método comparativo de casos e pela pesquisa qualitativa, realizada em nove empresas de base tecnológica, as quais se encontravam incubadas ou que passaram recentemente pela fase de incubação no Parque Tecnológico da cidade de São Carlos, do estado de São Paulo. Entre os principais resultados, constatou-se que, nas empresas graduadas, a gestão da informação e seus procedimentos foram identificados de forma mais consciente e estruturados em relação às empresas incubadas.

Halogenated aliphatic and aromatic aerobic biodegradation via direct metabolism and cometabolism: batch and continuous tests

In this thesis the application of biotechnological processes based on microbial metabolic degradation of halogenated compound has been investigated. Several studies showed that most of these pollutants can be biodegraded by single bacterial strains or mixed microbial population via aerobic direct metabolism or cometabolism using as a growth substrates aromatic or aliphatic hydrocarbons. The enhancement of two specific processes has been here object of study in relation with its own respective scenario described as follow: 1st) the bioremediation via aerobic cometabolism of soil contaminated by a high chlorinated compound using a mixed microbial population and the selection and isolation of consortium specific for the compound. 2nd) the implementation of a treatment technology based on direct metabolism of two pure strains at the exact point source of emission, preventing dilution and contamination of large volumes of waste fluids polluted by several halogenated compound minimizing the environmental impact. In order to verify the effect of these two new biotechnological application to remove halogenated compound and purpose them as a more efficient alternative continuous and batch tests have been set up in the experimental part of this thesis. Results obtained from the continuous tests in the second scenario have been supported by microbial analysis via Fluorescence in situ Hybridisation (FISH) and by a mathematical model of the system. The results showed that both process in its own respective scenario offer an effective solutions for the biological treatment of chlorinate compound pollution.

Structure-Property Relationships and Charge Transport Modeling of Organic Molecular Materials

From the perspective of a new-generation opto-electronic technology based on organic semiconductors, a major objective is to achieve a deep and detailed knowledge of the structure-property relationships, in order to optimize the electronic, optical, and charge transport properties by tuning the chemical-physical characteristics of the compounds. The purpose of this dissertation is to contribute to such understanding, through suitable theoretical and computational studies. Precisely, the structural, electronic, optical, and charge transport characteristics of several promising organic materials recently synthesized are investigated by means of an integrated approach encompassing quantum-chemical calculations, molecular dynamics and kinetic Monte Carlo simulations. Particular care is addressed to the rationalization of optical and charge transport properties in terms of both intra- and intermolecular features. Moreover, a considerable part of this project involves the development of a home-made set of procedures and parts of software code required to assist the modeling of charge transport properties in the framework of the non-adiabatic hopping mechanism applied to organic crystalline materials. As a first part of my investigations, I mainly discuss the optical, electronic, and structural properties of several core-extended rylene derivatives, which can be regarded to as model compounds for graphene nanoribbons. Two families have been studied, consisting in bay-linked perylene bisimide oligomers and N-annulated rylenes. Beside rylene derivatives, my studies also concerned electronic and spectroscopic properties of tetracene diimides, quinoidal oligothiophenes, and oxygen doped picene. As an example of device application, I studied the structural characteristics governing the efficiency of resistive molecular memories based on a derivative of benzoquinone. Finally, as a second part of my investigations, I concentrate on the charge transport properties of perylene bisimides derivatives. Precisely, a comprehensive study of the structural and thermal effects on the charge transport of several core-twisted chlorinated and fluoro-alkylated perylene bisimide n-type semiconductors is presented.

BioTuCSoN: biochemical extension of TuCSoN to support self-organising coordination

Starting from pervasive computing paradigm, we want to face the new system's requirements, concerning, mainly, self-organisation, situatedness and adaptivity, through the definition and execution of nature-inspired patterns. They are extracted by the study of dynamics in biological systems and we consider for their implementation the biochemical tuple spaces model. In particular, the aim of the thesis is to design and realize a first biochemical extension of TuCSoN (technology based on tuple spaces model) and, then, to verify its capabilities by means of a proper case study, that deals with local self-organisation and competition of services in an open and highly-dynamic environment.

Patterning soft matter for cell culturing

In the search to understand the interaction between cells and their underlying substrates, life sciences are beginning to incorporate micro and nano-technology based tools to probe, measure and improve cellular behavior. In this frame, patterned surfaces provide a platform for highly defined cellular interactions and, in perspective, they offer unique advantages for artificial implants. For these reasons, functionalized materials have recently become a central topic in tissue engineering. Nanotechnology, with its rich toolbox of techniques, can be the leading actor in the materials patterning field. Laser assisted methods, conventional and un-conventional lithography and other patterning techniques, allow the fabrication of functional supports with tunable properties, either physically, or topographically and chemically. Among them, soft lithography provides an effective (and low cost) strategy for manufacturing micro and nanostructures. The main focus of this work is the use of different fabrication approaches aiming at a precise control of cell behavior, adhesion, proliferation and differentiation, through chemically and spatially designed surfaces.

How teachers think about the role of digital technologies in student assessment in mathematics

This study concerns teachers’ use of digital technologies in student assessment, and how the learning that is developed through the use of technology in mathematics can be evaluated. Nowadays math teachers use digital technologies in their teaching, but not in student assessment. The activities carried out with technology are seen as ‘extra-curricular’ (by both teachers and students), thus students do not learn what they can do in mathematics with digital technologies. I was interested in knowing the reasons teachers do not use digital technology to assess students’ competencies, and what they would need to be able to design innovative and appropriate tasks to assess students’ learning through digital technology. This dissertation is built on two main components: teachers and task design. I analyze teachers’ practices involving digital technologies with Ruthven’s Structuring Features of Classroom Practice, and what relation these practices have to the types of assessment they use. I study the kinds of assessment tasks teachers design with a DGE (Dynamic Geometry Environment), using Laborde’s categorization of DGE tasks. I consider the competencies teachers aim to assess with these tasks, and how their goals relate to the learning outcomes of the curriculum. This study also develops new directions in finding how to design suitable tasks for student mathematical assessment in a DGE, and it is driven by the desire to know what kinds of questions teachers might be more interested in using. I investigate the kinds of technology-based assessment tasks teachers value, and the type of feedback they give to students. Finally, I point out that the curriculum should include a range of mathematical and technological competencies that involve the use of digital technologies in mathematics, and I evaluate the possibility to take advantage of technology feedback to allow students to continue learning while they are taking a test.

Plasmonic nanoparticles as sensors : a novel approach to quantify adsorption and diffusion kinetics

Biosensors find wide application in clinical diagnostics, bioprocess control and environmental monitoring. They should not only show high specificity and reproducibility but also a high sensitivity and stability of the signal. Therefore, I introduce a novel sensor technology based on plasmonic nanoparticles which overcomes both of these limitations. Plasmonic nanoparticles exhibit strong absorption and scattering in the visible and near-infrared spectral range. The plasmon resonance, the collective coherent oscillation mode of the conduction band electrons against the positively charged ionic lattice, is sensitive to the local environment of the particle. I monitor these changes in the resonance wavelength by a new dark-field spectroscopy technique. Due to a strong light source and a highly sensitive detector a temporal resolution in the microsecond regime is possible in combination with a high spectral stability. This opens a window to investigate dynamics on the molecular level and to gain knowledge about fundamental biological processes.rnFirst, I investigate adsorption at the non-equilibrium as well as at the equilibrium state. I show the temporal evolution of single adsorption events of fibrinogen on the surface of the sensor on a millisecond timescale. Fibrinogen is a blood plasma protein with a unique shape that plays a central role in blood coagulation and is always involved in cell-biomaterial interactions. Further, I monitor equilibrium coverage fluctuations of sodium dodecyl sulfate and demonstrate a new approach to quantify the characteristic rate constants which is independent of mass transfer interference and long term drifts of the measured signal. This method has been investigated theoretically by Monte-Carlo simulations but so far there has been no sensor technology with a sufficient signal-to-noise ratio.rnSecond, I apply plasmonic nanoparticles as sensors for the determination of diffusion coefficients. Thereby, the sensing volume of a single, immobilized nanorod is used as detection volume. When a diffusing particle enters the detection volume a shift in the resonance wavelength is introduced. As no labeling of the analyte is necessary the hydrodynamic radius and thus the diffusion properties are not altered and can be studied in their natural form. In comparison to the conventional Fluorescence Correlation Spectroscopy technique a volume reduction by a factor of 5000-10000 is reached.

Magnetic Flip Flops for Space Applications

The radiation environment of space presents a significant threat to the reliability of nonvolatile memory technologies. Ionizing radiation disturbs the charge stored on floating gates, and cosmic rays can permanently damage thin oxides. A new memory technology based on the magnetic tunneling junction (MTJ) appears to offer superior resistance to radiation effects and virtually unlimited write endurance. A magnetic flip flop has a number of potential applications, such as the configuration memory in field-programmable logic devices. However, using MTJs in a flip flop requires radically different circuitry for storing and retrieving data. New techniques are needed to insure that magnetic flip flops are reliable in the radiation environment of space. We propose a new radiation-tolerant magnetic flip flop that uses the inherent resistance of the MTJ to increase its immunity to single event upset and employs a robust “Pac-man” magnetic element.

Localized annealing of polysilicon microstructures by inductively heated ferromagnetic films

The monolithic integration of dissimilar microsystems is often limited by conflicts in thermal budget. One of the most prevalent examples is the fabrication of active micro-electromechanical systems (MEMS), as structural films utilized for surface micromachining such as polysilicon typically require processing at temperatures unsuitable for microelectronic circuitry. A localized annealing process could provide for the post-deposition heat treatment of integrated structures without compromising active devices. This dissertation presents a new microfabrication technology based on the inductive heating of ferromagnetic films patterned to define regions for heat treatment. Support is provided through theory, finite-element modeling, and experimentation, concluding with the demonstration of inductive annealing on polysilicon inertial sensing structures. Though still in its infancy, the results confirm the technology to be a viable option for integrated MEMS as well as any microsystem fabrication process requiring a thermal gradient.

COGNITIVE IMPACT OF INTERACTIVE MULTIMEDIA

Technology has been gradually introduced in heath education. One of the most attractive features of this technology-based education is the use of multimedia. In this article we explore the research evidence about the role that multimedia is playing in education. From that analysis we describe the most relevant features of this technology to prepare a common ground of discussion about the evaluation of its impact on educational outcomes. As part of this analysis, we organize current research evidence on the use of technology in medical education, distinguishing diverse variables involved in the process, like knowledge (declarative, procedural), learner characteristics, curricular scenario, etc. This article presents an overview of the Distributed Representations theory and its relationship with research on educational outcomes and multimedia. Next we discuss the relationship between media and diverse learning theories, proposing a theory based taxonomy for educational multimedia.

Estudio de la tecnología de identificación por radiofrecuencia, desarrollo y aplicaciones, seguridad, amenazas y mal uso

Resumen Ejecutivo Desde hace unos años, la tecnología RFID parece estar tecnológicamente madura, aunque se halla inmersa en una continua evolución y mejora de sus prestaciones frente a la tecnología basada en el código de barras. Esta tecnología está empezando a aumentar su comercialización y uso generalizado. Este proyecto describe su funcionamiento y arquitectura, las aplicaciones e implementaciones reales en diversos sectores empresariales y soluciones o propuestas para mejorar y fomentar investigaciones, desarrollos e implementaciones futuras. Una primera parte consiste en el desarrollo teórico del funcionamiento, parámetros físicos y la arquitectura RFID. En la segunda parte se estudian las aplicaciones potenciales, beneficios e inconvenientes y varios puntos de vista; empresas que invierten a favor de RFID y han realizado implementaciones reales exitosas y organizaciones en contra. La tercera y última parte analiza las consecuencias negativas que supone un mal uso de la tecnología como la pérdida de privacidad o confidencialidad, se proponen algunas medidas de seguridad y soluciones al problema utilizando la regularización y estandarización. Finalmente, tras estudiar la tecnología RFID, se aportan algunas conclusiones de carácter actual y de futuro después de observar resultados de expectativas previstas. Executive Summary For several years, RFID technology seems to be technologically mature, but is immersed in a continuous evolution and improvement of their performance than the technology based on the barcode. This technology is starting to increase their marketing and widespread use. This project describes its operation and architecture, applications and real implementations in different business sectors and solutions or proposals to improve and enhance research, development and future implementations. The first part consists of theory development of the operation, physical parameters and architecture RFID. The second part focuses on the potential applications, benefits and drawbacks and several points of view; companies investing on behalf of RFID and have made successful actual deployments and organizations against. The third and last part discusses the negative impact that is a bad use of technology such as loss of privacy or confidentiality; suggest some security measures and solutions to the problem using regularization and standardization. Finally, it provides some conclusions of the current character, after studying RFID technology and the future after observing results of expectations.

Utilización de bloqueadores metabólicos y optimización de las condiciones de aplicación para la reducción del grado alcohólico en vinos elaborados a partir de uva procedente de zonas cálidas

El presente trabajo de Tesis describe la posibilidad de modular la fermentación alcohólica utilizando bloqueadores metabólicos como furfural, o-vainillina, ácido cinámico, glicolaldehído, p-benzoquinona y cobre; para controlar la producción de etanol. El redireccionamiento de la ruta glicolítica en Saccharomyces cerevisiae favorece el descenso del grado alcohólico gracias al aumento de la producción de metabolitos secundarios de interés enológico. La primera parte de la Tesis presenta una revisión bibliográfica sobre estudios previos en los que se ha evaluado el efecto de los diferentes bloqueadores metabólicos en la producción de etanol durante la fermentación alcohólica. La segunda parte muestra los resultados experimentales de producción de etanol obtenidos con los bloqueadores metabólicos, observándose una amplia variabilidad en su efecto en función de la naturaleza química de cada bloqueador y de la naturaleza del medio fermentativo utilizado. Finalmente, la tercera parte del trabajo muestra el efecto de los bloqueadores metabólicos sobre los parámetros colorimétricos y la producción de metabolitos secundarios, observándose un importante efecto en la producción de glicerina y en algunos de los compuestos volátiles fermentativos. La principal aplicación de esta tecnología basada en la utilización de bloqueadores metabólicos sería la elaboración de vinos con una menor graduación alcohólica a partir de uva procedente de zonas cálidas. ABSTRACT This thesis describes the possibility of modulating the alcoholic fermentation using metabolic blockers such as furfural, o-vanillin, cinnamic acid, glycolaldehyde, p-benzoquinone and copper. The controlled production of ethanol by redirecting of the glycolytic pathway in Saccharomyces cerevisiae, is achieved through diverting some of the carbohydrates away from alcohol production into the formation of glycolytic intermediates of interest to the winemaking industry. The first part of this work shows a literature review on previous studies about the effect of different metabolic blockers in order to reduce the ethanol production during alcoholic fermentation. The second part deals about the experimental results of ethanol production obtained with the metabolic blockers, showing a wide variation in the inhibitory effect depending on the chemical nature of each blocker and the nature of the fermentation medium used. Finally, the third part discussed about the effect of the metabolic blockers on colorimetric parameters and production of secondary metabolites, showing a significant effect on the production of glycerol and in some of the volatile fermentative compounds. The main application of this technology based on the use of metabolic blockers could lie in the preparation of reduced-alcohol wines from grapes grown in hot climate regions.

Assessing the suitability of student interactions from Moodle data logs as predictors of cross-curricular competencies

In the past decades, online learning has transformed the educational landscape with the emergence of new ways to learn. This fact, together with recent changes in educational policy in Europe aiming to facilitate the incorporation of graduate students to the labor market, has provoked a shift on the delivery of instruction and on the role played by teachers and students, stressing the need for development of both basic and cross-curricular competencies. In parallel, the last years have witnessed the emergence of new educational disciplines that can take advantage of the information retrieved by technology-based online education in order to improve instruction, such as learning analytics. This study explores the applicability of learning analytics for prediction of development of two cross-curricular competencies – teamwork and commitment – based on the analysis of Moodle interaction data logs in a Master’s Degree program at Universidad a Distancia de Madrid (UDIMA) where the students were education professionals. The results from the study question the suitability of a general interaction-based approach and show no relation between online activity indicators and teamwork and commitment acquisition. The discussion of results includes multiple recommendations for further research on this topic.