Geohydrology of the Antelope Valley Area, California and design for a ground-water-quality monitoring network /

Mode of access: Internet.

Saving lives through better design standards /

Mode of access: Internet.

Survey for papillomatous digital dermatitis in Australian dairy cattle

Objective To determine whether Treponema-associated papillomatous digital dermatitis (PDD) occurs in Australian dairy cattle. Design Mail-out questionnaire and histological and bacteriological examination of biopsy tissue from suspect PDD lesions. Procedure The questionnaire was mailed to 375 veterinarians to evaluate their knowledge of PDD, determine if they had observed the disease in Australian dairy cattle, and to request biopsy material from suspicious cases. Biopsies were examined for histological and bacteriological evidence of PDD, including for the presence of spirochaetes. Results Eighty-eight replies to the questionnaire were received (23.5%). Of 52 respondents who were aware of PDD as a possible cause of lameness, 26 reported observing the condition in Australian cattle. Of 32 respondents who were unaware of the condition, 6 reported observing lesions that might have been PDD. The majority of reports of PDD-like lesions came from the southern Australian states, the condition occurring during periods of high rainfall and proving responsive to topical or parenteral application of antimicrobials. Biopsies from five erosive lesions showed histological similarity to PDD whereas biopsies from five proliferative lesions were consistent with chronic inflammation, fibroma or cutaneous papilloma. The presence of spirochaetes was not demonstrated in any of the lesions by histological or bacteriological methods. Conclusion Anecdotal reports and analysis of biopsy material confirm that a condition similar to PDD does occur sporadically in dairy cattle in southern Australia. However, this condition has so far not been shown to be associated with the presence of spirochaetes in the lesions.

National survey of the prevalence, incidence, primary care burden, and treatment of heart failure in Scotland

Objective: To examine the epidemiology, primary care burden, and treatment of heart failure in Scotland, UK. Design: Cross sectional data from primary care practices participating in the Scottish continuous morbidity recording scheme between 1 April 1999 and 31 March 2000. Setting: 53 primary care practices ( 307 741 patients). Subjects: 2186 adult patients with heart failure. Results: The prevalence of heart failure in Scotland was 7.1 in 1000, increasing with age to 90.1 in 1000 among patients greater than or equal to 85 years. The incidence of heart failure was 2.0 in 1000, increasing with age to 22.4 in 1000 among patients greater than or equal to 85 years. For older patients, consultation rates for heart failure equalled or exceeded those for angina and hypertension. Respiratory tract infection was the most common comorbidity leading to consultation. Among men, 23% were prescribed a beta blocker, 11% spironolactone, and 46% an angiotensin converting enzyme inhibitor. The corresponding figures for women were 20% (p = 0.29 versus men), 7% (p = 0.02), and 34% (p < 0.001). Among patients, 75 years 26% were prescribed a β blocker, 11% spironolactone, and 50% an angiotensin converting enzyme inhibitor. The corresponding figures for patients &GE; 75 years were 19% (p = 0.04 versus patients < 75), 7% (p = 0.04), and 33% (p < 0.001). Conclusions: Heart failure is a common condition, especially with advancing age. In the elderly, the community burden of heart failure is at least as great as that of angina or hypertension. The high rate of concomitant respiratory tract infection emphasises the need for strategies to immunise patients with heart failure against influenza and pneumococcal infection. Drugs proven to improve survival in heart failure are used less frequently for elderly patients and women.

Measuring crime prevention through environmental design

Crime Prevention Through Environmental Design (CPTED) has considerable support among the built environment professions. Yet the underlying assumptions on which it is based have rarely been, effectiveness or efficacy. This paper reports the development and use of a evaluated to assess their of scale that measured the actual levels of incidental CPTED in two residential areas in Gold Coast, Australia. The scale was administered in parallel with a victimization and social attitude survey. Analysis based on the combination of the two suggests that CPTED measures may have some effect on reducing victimization, particularly the kind of CPTED measures that apply to the group of dwellings on a single street, but the effect on fear of crime is surprisingly limited. It also indicates that there is on a single street, but the of potential in the application of such a scale in a wider assessment of the effectiveness of operationalizing CPTED design measures.

Sensitivity of marine-reserve design to the spatial resolution of socioeconomic data

Socioeconomic considerations should have an important place in reserve design, Systematic reserve-selection tools allow simultaneous optimization for ecological objectives while minimizing costs but are seldom used to incorporate socioeconomic costs in the reserve-design process. The sensitivity of this process to biodiversity data resolution has been studied widely but the issue of socioeconomic data resolution has not previously been considered. We therefore designed marine reserves for biodiversity conservation with the constraint of minimizing commercial fishing revenue losses and investigated how economic data resolution affected the results. Incorporating coarse-resolution economic data from official statistics generated reserves that were only marginally less costly to the fishery than those designed with no attempt to minimize economic impacts. An intensive survey yielded fine-resolution data that, when incorporated in the design process, substantially reduced predicted fishery losses. Such an approach could help minimize fisher displacement because the least profitable grounds are selected for the reserve. Other work has shown that low-resolution biodiversity data can lead to underestimation of the conservation value of some sites, and a risk of overlooking the most valuable areas, and we have similarly shown that low-resolution economic data can cause underestimation of the profitability of some sites and a risk of inadvertently including these in the reserve. Detailed socioeconomic data are therefore an essential input for the design of cost-effective reserve networks.

Characteristics of left ventricular diastolic dysfunction in the community: an echocardiographic survey

Objective: To determine the prevalence and predictors of left ventricular (LV) diastolic dysfunction in older adults. Design, setting and participants: A cross-sectional survey of 1275 randomly selected residents of Canberra, aged 60 to 86 years (mean age 69.4; 50% men), conducted between February 2002 and June 2003. Main outcome measures: Prevalence of LV diastolic dysfunction as characterised by comprehensive Doppler echocardiography. Results: The prevalence of any diastolic dysfunction was 34.7% (95% CI 32.1% to 37.4%) and that of moderate to severe diastolic dysfunction was 7.3% (95% CI 5.9% to 8.9%). Of subjects with moderate to severe diastolic dysfunction, 77.4% had an LV ejection fraction (EF) > 50% and 76.3% were in a preclinical stage of disease. Predictors of diastolic dysfunction were higher age (p < 0.0001), reduced EF (p < 0.0001), obesity (p < 0.0001) and a history of hypertension (p < 0.0001), diabetes (p = 0.02) and myocardial infarction (p = 0.003). Moderate to severe diastolic dysfunction with normal EF, although predominantly preclinical, was independently associated with increased LV mass (p < 0.0001), left atrial volume (p < 0.0001), and circulating amino-terminal pro-B-type natriuretic peptide concentrations (p < 0.0001), and with decreased quality of life (p < 0.005). Conclusion: Diastolic dysfunction is common in the community and often unaccompanied by overt congestive heart failure. Despite the lack of symptoms, advanced diastolic dysfunction with normal EF is associated with reduced quality of life and structural abnormalities that reflect increased cardiovascular risk.

Images of pharmacy as a career: a survey among groups of year 12 students at school

To explore the images and perceptions of pharmacy with potential applicants to undergraduate pharmacy education. There is currently considerable interest in the UK in studying aspects of the pharmacy profession because of the changing pharmacy agenda and the need to understand the workforce and its motivations. Aim: To explore the images and perceptions of pharmacy with potential applicants to undergraduate pharmacy education. Design: Four interactive focus groups involving 40 volunteer year 12 students (age 17). The focus group theme plan was designed after a review of relevant literature. A novel approach was employed using photographic images of pharmacists and doctors in varied settings. Subjects and setting: The research was carried out in six schools in the West Midlands, UK. Results: The students presented a rather negative image of pharmacy as a boring occupation in a laboratory or the back of a shop. Most had little idea of what pharmacists actually do. Unlike nursing, they were unaware of positive role models in the media. The small number who did have a realistic idea of pharmacy based it on their previous work experience in pharmacy. Conclusions: The focus group technique is useful for exploring hitherto untapped perceptions of the profession. Undertaking research with year 12 students provided some useful insights into the ways in which pharmacy as a profession is perceived. Although no claims to generalisability are made here, the results were fed into the design of quantitative surveys. The somewhat negative image presented suggests that the profession has more work to do in marketing itself to young people as a potential career choice.

Perceptions of journal quality and research paradigm:results of a web-based survey of British accounting academics

This paper reports the results of a web-based perception study of the ranking of peer reviewed accounting journals by UK academics. The design of the survey instrument allows an interactive selection of journals to be scored. The webbased format is unique in that it also includes a step in which respondents classify the journals according to methodological perspective (paradigm). This is depicted graphically in the paper in a bubble diagram that shows the "positioning" of journals according to perceptions of both paradigm and quality.

Prevalence of subclinical thyroid dysfunction and its relation to socioeconomic deprivation in the elderly:a community-based cross-sectional survey

Context: Population-based screening has been advocated for subclinical thyroid dysfunction in the elderly because the disorder is perceived to be common, and health benefits may be accrued by detection and treatment. Objective: The objective of the study was to determine the prevalence of subclinical thyroid dysfunction and unidentified overt thyroid dysfunction in an elderly population. Design, Setting, and Participants: A cross-sectional survey of a community sample of participants aged 65 yr and older registered with 20 family practices in the United Kingdom. Exclusions: Exclusions included current therapy for thyroid disease, thyroid surgery, or treatment within 12 months. Outcome Measure: Tests of thyroid function (TSH concentration and free T 4 concentration in all, with measurement of free T3 in those with low TSH) were conducted. Explanatory Variables: These included all current medical diagnoses and drug therapies, age, gender, and socioeconomic deprivation (Index of Multiple Deprivation, 2004) Analysis: Standardized prevalence rates were analyzed. Logistic regression modeling was used to determine factors associated with the presence of subclinical thyroid dysfunction Results: A total of 5960 attended for screening. Using biochemical definitions, 94.2% [95% confidence interval (CI) 93.8-94.6%] were euthyroid. Unidentified overt hyper- and hypothyroidism were uncommon (0.3, 0.4%, respectively). Subclinical hyperthyroidism and hypothyroidism were identified with similar frequency (2.1%, 95% CI 1.8-2.3%; 2.9%, 95% CI 2.6-3.1%, respectively). Subclinical thyroid dysfunction was more common in females (P < 0.001) and with increasing age (P < 0.001). After allowing for comorbidities, concurrent drug therapies, age, and gender, an association between subclinical hyperthyroidism and a composite measure of socioeconomic deprivation remained. Conclusions: Undiagnosed overt thyroid dysfunction is uncommon. The prevalence of subclinical thyroid dysfunction is 5%. We have, for the first time, identified an independent association between the prevalence of subclinical thyroid dysfunction and deprivation that cannot be explained solely by the greater burden of chronic disease and/or consequent drug therapies in the deprived population. Copyright © 2006 by The Endocrine Society.

A detailed design study of leaching and ancillary processes in the hydrometallurgical extraction of iron from iron bearing feedstocks

A systematic survey of the possible methods of chemical extraction of iron by chloride formation has been presented and supported by a comparable study of :feedstocks, products and markets. The generation and evaluation of alternative processes was carried out by the technique of morphological analysis vihich was exploited by way of a computer program. The final choice was related to technical feasibility and economic viability, particularly capital cost requirements and developments were made in an estimating procedure for hydrometallurgjcal processes which have general applications. The systematic exploration included the compilation of relevant data, and this indicated a need.to investigate precipitative hydrolysis or aqueous ferric chloride. Arising from this study, two novel hydrometallurgical processes for manufacturing iron powder are proposed and experimental work was undertaken in the following .areas to demonstrate feasibility and obtain basic data for design purposes: (1) Precipitative hydrolysis of aqueous ferric chloride. (2) Gaseous chloridation of metallic iron, and oxidation of resultant ferrous chloride. (3) Reduction of gaseous ferric chloride with hydrogen. (4) Aqueous acid leaching of low grade iron ore. (5) Aqueous acid leaching of metallic iron. The experimentation was supported by theoretical analyses dealing with: (1) Thermodynamics of hydrolysis. (2) Kinetics of ore leaching. (3) Kinetics of metallic iron leaching. (4) Crystallisation of ferrous chloride. (5) Oxidation of anhydrous ferrous chloride. (6) Reduction of ferric chloride. Conceptual designs are suggested fbr both the processes mentioned. These draw attention to areas where further work is necessary, which are listed. Economic analyses have been performed which isolate significant cost areas, und indicate total production costs. Comparisons are mode with previous and analogous proposals for the production of iron powder.

Information systems design for the community health services

This system is concerned with the design and implementation of a community health information system which fulfils some of the local needs of fourteen nursing and para-medical professions in a district health authority, whilst satisfying the statutory requirements of the NHS Korner steering group for those professions. A national survey of community health computer applications, documented in the form of an applications register, shows the need for such a system. A series of general requirements for an informations systems design methodology are identified, together with specific requirements for this problem situation. A number of existing methodologies are reviewed, but none of these were appropriate for this application. Some existing approaches, tools and techniques are used to define a more suitable methodology. It is unreasonable to rely on one single general methodology for all types of application development. There is a need for pragmatism, adaptation and flexibility. In this research, participation in the development stages by those who will eventually use the system was thought desirable. This was achieved by forming a representative design group. Results would seem to show a highly favourable response from users to this participation which contributed to the overall success of the system implemented. A prototype was developed for the chiropody and school nursing staff groups of Darlington health authority, and evaluations show that a significant number of the problems and objectives of those groups have been successfully addressed; the value of community health information has been increased; and information has been successfully fed back to staff and better utilised.

A Generic model for the design and analysis of production systems

This dissertation studies the process of operations systems design within the context of the manufacturing organization. Using the DRAMA (Design Routine for Adopting Modular Assembly) model as developed by a team from the IDOM Research Unit at Aston University as a starting point, the research employed empirically based fieldwork and a survey to investigate the process of production systems design and implementation within four UK manufacturing industries: electronics assembly, electrical engineering, mechanical engineering and carpet manufacturing. The intention was to validate the basic DRAMA model as a framework for research enquiry within the electronics industry, where the initial IDOM work was conducted, and then to test its generic applicability, further developing the model where appropriate, within the other industries selected. The thesis contains a review of production systems design theory and practice prior to presenting thirteen industrial case studies of production systems design from the four industry sectors. The results and analysis of the postal survey into production systems design are then presented. The strategic decisions of manufacturing and their relationship to production systems design, and the detailed process of production systems design and operation are then discussed. These analyses are used to develop the generic model of production systems design entitled DRAMA II (Decision Rules for Analysing Manufacturing Activities). The model contains three main constituent parts: the basic DRAMA model, the extended DRAMA II model showing the imperatives and relationships within the design process, and a benchmark generic approach for the design and analysis of each component in the design process. DRAMA II is primarily intended for use by researchers as an analytical framework of enquiry, but is also seen as having application for manufacturing practitioners.

The application of knowledge based expert systems to mechanical engineering design

Investigation of the different approaches used by Expert Systems researchers to solve problems in the domain of Mechanical Design and Expert Systems was carried out. The techniques used for conventional formal logic programming were compared with those used when applying Expert Systems concepts. A literature survey of design processes was also conducted with a view to adopting a suitable model of the design process. A model, comprising a variation on two established ones, was developed and applied to a problem within what are described as class 3 design tasks. The research explored the application of these concepts to Mechanical Engineering Design problems and their implementation on a microcomputer using an Expert System building tool. It was necessary to explore the use of Expert Systems in this manner so as to bridge the gap between their use as a control structure and for detailed analytical design. The former application is well researched into and this thesis discusses the latter. Some Expert System building tools available to the author at the beginning of his work were evaluated specifically for their suitability for Mechanical Engineering design problems. Microsynics was found to be the most suitable on which to implement a design problem because of its simple but powerful Semantic Net Knowledge Representation structure and the ability to use other types of representation schemes. Two major implementations were carried out. The first involved a design program for a Helical compression spring and the second a gearpair system design. Two concepts were proposed in the thesis for the modelling and implementation of design systems involving many equations. The method proposed enables equation manipulation and analysis using a combination of frames, semantic nets and production rules. The use of semantic nets for purposes other than for psychology and natural language interpretation, is quite new and represents one of the major contributions to knowledge by the author. The development of a purpose built shell program for this type of design problems was recommended as an extension of the research. Microsynics may usefully be used as a platform for this development.

Computer aided form roll design

Cold roll forming is an extremely important but little studied sheet metal forming process. In this thesis, the process of cold roll forming is introduced and it is seen that form roll design is central to the cold roll forming process. The conventional design and manufacture of form rolls is discussed and it is observed that surrounding the design process are a number of activities which although peripheral are time consuming and a possible source of error. A CAD/CAM system is described which alleviates many of the problems traditional to form roll design. New techniques for the calculation of strip length and controlling the means of forming bends are detailed. The CAD/CAM system's advantages and limitations are discussed and, whilst the system has numerous significant advantages, its principal limitation can be said to be the need to manufacture form rolls and test them on a mill before a design can be stated satisfactory. A survey of the previous theoretical and experimental analysis of cold roll forming is presented and is found to be limited. By considering the previous work, a method of numerical analysis of the cold roll forming process is proposed based on a minimum energy approach. Parallel to the numerical analysis, a comprehensive range of software has been developed to enhance the designer's visualisation of the effects of his form roll design. A complementary approach to the analysis of form roll design is the generation of form roll design, a method for the partial generation of designs is described. It is suggested that the two approaches should continue in parallel and that the limitation of each approach is knowledge of the cold roll forming process. Hence, an initial experimental investigation of the rolling of channel sections is described. Finally, areas of potential future work are discussed.