1000x shadow-free mirror-based Köhler concentrator

A new design for a photovoltaic concentrator, the most recent advance based on the Kohler concept, is presented. The system is mirror-based, and with geometry that guaranties a maximum sunlight collection area (without shadows, like those caused by secondary stages or receivers and heat-sinks in other mirror-based systems). Designed for a concentration of 1000x, this off axis system combines both good acceptance angle and good irradiance uniformity on the solar cell. The advanced performance features (concentration-acceptance products ?CAP- about 0.73 and affordable peak and average irradiances) are achieved through the combination of four reflective folds combined with four refractive surfaces, all of them free-form, performing Köhler integration 2 . In Köhler devices, the irradiance uniformity is not achieved through additional optical stages (TIR prisms), thus no complex/expensive elements to manufacture are required. The rim angle and geometry are such that the secondary stage and receivers are hidden below the primary mirrors, so maximum collection is assured. The entire system was designed to allow loose assembly/alignment tolerances (through high acceptance angle) and to be manufactured using already well-developed methods for mass production, with high potential for low cost. The optical surfaces for Köhler integration, although with a quite different optical behavior, have approximately the same dimensions and can be manufactured with the same techniques as the more traditional secondary optical elements used for concentration (typically plastic injection molding or glass molding).

Distributed control strategies for photovoltaic systems in urban environments

Este trabajo es una contribución a los sistemas fotovoltaicos (FV) con seguimiento distribuido del punto de máxima potencia (DMPPT), una topología que se caracteriza porque lleva a cabo el MPPT a nivel de módulo, al contrario de las topologías más tradicionales que llevan a cabo el MPPT para un número más elevado de módulos, pudiendo ser hasta cientos de módulos. Las dos tecnologías DMPPT que existen en el mercado son conocidos como microinversores y optimizadores de potencia, y ofrecen ciertas ventajas sobre sistemas de MPPT central como: mayor producción en situaciones de mismatch, monitorización individual de cada módulo, flexibilidad de diseño, mayor seguridad del sistema, etc. Aunque los sistemas DMPPT no están limitados a los entornos urbanos, se ha enfatizado en el título ya que es su mercado natural, siendo difícil una justificación de su sobrecoste en grandes huertas solares en suelo. Desde el año 2010 el mercado de estos sistemas ha incrementado notablemente y sigue creciendo de una forma continuada. Sin embargo, todavía falta un conocimiento profundo de cómo funcionan estos sistemas, especialmente en el caso de los optimizadores de potencia, de las ganancias energéticas esperables en condiciones de mismatch y de las posibilidades avanzadas de diagnóstico de fallos. El principal objetivo de esta tesis es presentar un estudio completo de cómo funcionan los sistemas DMPPT, sus límites y sus ventajas, así como experimentos varios que verifican la teoría y el desarrollo de herramientas para valorar las ventajas de utilizar DMPPT en cada instalación. Las ecuaciones que modelan el funcionamiento de los sistemas FVs con optimizadores de potencia se han desarrollado y utilizado para resaltar los límites de los mismos a la hora de resolver ciertas situaciones de mismatch. Se presenta un estudio profundo sobre el efecto de las sombras en los sistemas FVs: en la curva I-V y en los algoritmos MPPT. Se han llevado a cabo experimentos sobre el funcionamiento de los algoritmos MPPT en situaciones de sombreado, señalando su ineficiencia en estas situaciones. Un análisis de la ventaja del uso de DMPPT frente a los puntos calientes es presentado y verificado. También se presenta un análisis sobre las posibles ganancias en potencia y energía con el uso de DMPPT en condiciones de sombreado y este también es verificado experimentalmente, así como un breve estudio de su viabilidad económica. Para ayudar a llevar a cabo todos los análisis y experimentos descritos previamente se han desarrollado una serie de herramientas software. Una siendo un programa en LabView para controlar un simulador solar y almacenar las medidas. También se ha desarrollado un programa que simula curvas I-V de módulos y generador FVs afectados por sombras y este se ha verificado experimentalmente. Este mismo programa se ha utilizado para desarrollar un programa todavía más completo que estima las pérdidas anuales y las ganancias obtenidas con DMPPT en instalaciones FVs afectadas por sombras. Finalmente, se han desarrollado y verificado unos algoritmos para diagnosticar fallos en sistemas FVs con DMPPT. Esta herramienta puede diagnosticar los siguientes fallos: sombras debido a objetos fijos (con estimación de la distancia al objeto), suciedad localizada, suciedad general, posible punto caliente, degradación de módulos y pérdidas en el cableado de DC. Además, alerta al usuario de las pérdidas producidas por cada fallo y no requiere del uso de sensores de irradiancia y temperatura. ABSTRACT This work is a contribution to photovoltaic (PV) systems with distributed maximum power point tracking (DMPPT), a system topology characterized by performing the MPPT at module level, instead of the more traditional topologies which perform MPPT for a larger number of modules. The two DMPPT technologies available at the moment are known as microinverters and power optimizers, also known as module level power electronics (MLPE), and they provide certain advantages over central MPPT systems like: higher energy production in mismatch situations, monitoring of each individual module, system design flexibility, higher system safety, etc. Although DMPPT is not limited to urban environments, it has been emphasized in the title as it is their natural market, since in large ground-mounted PV plants the extra cost is difficult to justify. Since 2010 MLPE have increased their market share steadily and continuing to grow steadily. However, there still lacks a profound understanding of how they work, especially in the case of power optimizers, the achievable energy gains with their use and the possibilities in failure diagnosis. The main objective of this thesis is to provide a complete understanding of DMPPT technologies: how they function, their limitations and their advantages. A series of equations used to model PV arrays with power optimizers have been derived and used to point out limitations in solving certain mismatch situation. Because one of the most emphasized benefits of DMPPT is their ability to mitigate shading losses, an extensive study on the effects of shadows on PV systems is presented; both on the I-V curve and on MPPT algorithms. Experimental tests have been performed on the MPPT algorithms of central inverters and MLPE, highlighting their inefficiency in I-V curves with local maxima. An analysis of the possible mitigation of hot-spots with DMPPT is discussed and experimentally verified. And a theoretical analysis of the possible power and energy gains is presented as well as experiments in real PV systems. A short economic analysis of the benefits of DMPPT has also been performed. In order to aide in the previous task, a program which simulates I-V curves under shaded conditions has been developed and experimentally verified. This same program has been used to develop a software tool especially designed for PV systems affected by shading, which estimates the losses due to shading and the energy gains obtained with DMPPT. Finally, a set of algorithms for diagnosing system faults in PV systems with DMPPT has been developed and experimentally verified. The tool can diagnose the following failures: fixed object shading (with distance estimation), localized dirt, generalized dirt, possible hot-spots, module degradation and excessive losses in DC cables. In addition, it alerts the user of the power losses produced by each failure and classifies the failures by their severity and it does not require the use of irradiance or temperature sensors.

Tenerife South Airport (Phase III)

An architecture of light and shadows is proposed for this airport for the twenty-first century. A great concrete and stone box to frame the incredible view south towards a red mountain that rests Sphinx-like over the Atlantic. = Se propone para este aeropuerto para el siglo XXI una arquitectura construída con la luz y con las sombras. Una gran caja de hormigón que enmarca un maravilloso paisaje: el océano atlántico al sur con la montaña roja que se acuesta sobre el mar como si de una esfinge se tratara.

Distributed control strategies for photovoltaic systems in urban environments : Versión definitiva

Este trabajo es una contribución a los sistemas fotovoltaicos (FV) con seguimiento distribuido del punto de máxima potencia (DMPPT), una topología que se caracteriza porque lleva a cabo el MPPT a nivel de módulo, al contrario de las topologías más tradicionales que llevan a cabo el MPPT para un número más elevado de módulos, pudiendo ser hasta cientos de módulos. Las dos tecnologías DMPPT que existen en el mercado son conocidos como microinversores y optimizadores de potencia, y ofrecen ciertas ventajas sobre sistemas de MPPT central como: mayor producción en situaciones de mismatch, monitorización individual de cada módulo, flexibilidad de diseño, mayor seguridad del sistema, etc. Aunque los sistemas DMPPT no están limitados a los entornos urbanos, se ha enfatizado en el título ya que es su mercado natural, siendo difícil una justificación de su sobrecoste en grandes huertas solares en suelo. Desde el año 2010 el mercado de estos sistemas ha incrementado notablemente y sigue creciendo de una forma continuada. Sin embargo, todavía falta un conocimiento profundo de cómo funcionan estos sistemas, especialmente en el caso de los optimizadores de potencia, de las ganancias energéticas esperables en condiciones de mismatch y de las posibilidades avanzadas de diagnóstico de fallos. El principal objetivo de esta tesis es presentar un estudio completo de cómo funcionan los sistemas DMPPT, sus límites y sus ventajas, así como experimentos varios que verifican la teoría y el desarrollo de herramientas para valorar las ventajas de utilizar DMPPT en cada instalación. Las ecuaciones que modelan el funcionamiento de los sistemas FVs con optimizadores de potencia se han desarrollado y utilizado para resaltar los límites de los mismos a la hora de resolver ciertas situaciones de mismatch. Se presenta un estudio profundo sobre el efecto de las sombras en los sistemas FVs: en la curva I-V y en los algoritmos MPPT. Se han llevado a cabo experimentos sobre el funcionamiento de los algoritmos MPPT en situaciones de sombreado, señalando su ineficiencia en estas situaciones. Un análisis de la ventaja del uso de DMPPT frente a los puntos calientes es presentado y verificado. También se presenta un análisis sobre las posibles ganancias en potencia y energía con el uso de DMPPT en condiciones de sombreado y este también es verificado experimentalmente, así como un breve estudio de su viabilidad económica. Para ayudar a llevar a cabo todos los análisis y experimentos descritos previamente se han desarrollado una serie de herramientas software. Una siendo un programa en LabView para controlar un simulador solar y almacenar las medidas. También se ha desarrollado un programa que simula curvas I-V de módulos y generador FVs afectados por sombras y este se ha verificado experimentalmente. Este mismo programa se ha utilizado para desarrollar un programa todavía más completo que estima las pérdidas anuales y las ganancias obtenidas con DMPPT en instalaciones FVs afectadas por sombras. Finalmente, se han desarrollado y verificado unos algoritmos para diagnosticar fallos en sistemas FVs con DMPPT. Esta herramienta puede diagnosticar los siguientes fallos: sombras debido a objetos fijos (con estimación de la distancia al objeto), suciedad localizada, suciedad general, posible punto caliente, degradación de módulos y pérdidas en el cableado de DC. Además, alerta al usuario de las pérdidas producidas por cada fallo y no requiere del uso de sensores de irradiancia y temperatura. ABSTRACT This work is a contribution to photovoltaic (PV) systems with distributed maximum power point tracking (DMPPT), a system topology characterized by performing the MPPT at module level, instead of the more traditional topologies which perform MPPT for a larger number of modules. The two DMPPT technologies available at the moment are known as microinverters and power optimizers, also known as module level power electronics (MLPE), and they provide certain advantages over central MPPT systems like: higher energy production in mismatch situations, monitoring of each individual module, system design flexibility, higher system safety, etc. Although DMPPT is not limited to urban environments, it has been emphasized in the title as it is their natural market, since in large ground-mounted PV plants the extra cost is difficult to justify. Since 2010 MLPE have increased their market share steadily and continuing to grow steadily. However, there still lacks a profound understanding of how they work, especially in the case of power optimizers, the achievable energy gains with their use and the possibilities in failure diagnosis. The main objective of this thesis is to provide a complete understanding of DMPPT technologies: how they function, their limitations and their advantages. A series of equations used to model PV arrays with power optimizers have been derived and used to point out limitations in solving certain mismatch situation. Because one of the most emphasized benefits of DMPPT is their ability to mitigate shading losses, an extensive study on the effects of shadows on PV systems is presented; both on the I-V curve and on MPPT algorithms. Experimental tests have been performed on the MPPT algorithms of central inverters and MLPE, highlighting their inefficiency in I-V curves with local maxima. An analysis of the possible mitigation of hot-spots with DMPPT is discussed and experimentally verified. And a theoretical analysis of the possible power and energy gains is presented as well as experiments in real PV systems. A short economic analysis of the benefits of DMPPT has also been performed. In order to aide in the previous task, a program which simulates I-V curves under shaded conditions has been developed and experimentally verified. This same program has been used to develop a software tool especially designed for PV systems affected by shading, which estimates the losses due to shading and the energy gains obtained with DMPPT. Finally, a set of algorithms for diagnosing system faults in PV systems with DMPPT has been developed and experimentally verified. The tool can diagnose the following failures: fixed object shading (with distance estimation), localized dirt, generalized dirt, possible hot-spots, module degradation and excessive losses in DC cables. In addition, it alerts the user of the power losses produced by each failure and classifies the failures by their severity and it does not require the use of irradiance or temperature sensors.

Methodology for estimating building integrated photovoltaics electricity production under shadowing conditions and case study

Building integrated photovoltaic (BIPV) systems are a relevant application of photovoltaics. In countries belonging to the International Energy Agency countries, 24% of total installed PV power corresponds to BIPV systems. Electricity losses caused by shadows over the PV generator have a significant impact on the performance of BIPV systems, being the major source of electricity losses. This paper presents a methodology to estimate electricity produced by BIPV systems which incorporates a model for shading losses. The proposed methodology has been validated on a one year study with real data from two similar PV systems placed on the south façade of a building belonging to the Technical University of Madrid. This study has covered all weather conditions: clear, partially overcast and fully overcast sky. Results of this study are shown at different time scales, resulting that the errors committed by the best performing model are below 1% and 3% in annual and daily electricity estimation. The use of models which account for the reduced performance at low irradiance levels also improves the estimation of generated electricity.

3D simulation of complex shading affecting PV systems taking benefit from the power of graphics cards developed for the video game industry

Shading reduces the power output of a photovoltaic (PV) system. The design engineering of PV systems requires modeling and evaluating shading losses. Some PV systems are affected by complex shading scenes whose resulting PV energy losses are very difficult to evaluate with current modeling tools. Several specialized PV design and simulation software include the possibility to evaluate shading losses. They generally possess a Graphical User Interface (GUI) through which the user can draw a 3D shading scene, and then evaluate its corresponding PV energy losses. The complexity of the objects that these tools can handle is relatively limited. We have created a software solution, 3DPV, which allows evaluating the energy losses induced by complex 3D scenes on PV generators. The 3D objects can be imported from specialized 3D modeling software or from a 3D object library. The shadows cast by this 3D scene on the PV generator are then directly evaluated from the Graphics Processing Unit (GPU). Thanks to the recent development of GPUs for the video game industry, the shadows can be evaluated with a very high spatial resolution that reaches well beyond the PV cell level, in very short calculation times. A PV simulation model then translates the geometrical shading into PV energy output losses. 3DPV has been implemented using WebGL, which allows it to run directly from a Web browser, without requiring any local installation from the user. This also allows taken full benefits from the information already available from Internet, such as the 3D object libraries. This contribution describes, step by step, the method that allows 3DPV to evaluate the PV energy losses caused by complex shading. We then illustrate the results of this methodology to several application cases that are encountered in the world of PV systems design. Keywords: 3D, modeling, simulation, GPU, shading, losses, shadow mapping, solar, photovoltaic, PV, WebGL

Color uniformity in spotligths - visual perception and system design

La iluminación con diodos emisores de luz (LED) está reemplazando cada vez en mayor medida a las fuentes de luz tradicionales. La iluminación LED ofrece ventajas en eficiencia, consumo de energía, diseño, tamaño y calidad de la luz. Durante más de 50 años, los investigadores han estado trabajando en mejoras LED. Su principal relevancia para la iluminación está aumentando rápidamente. Esta tesis se centra en un campo de aplicación importante, como son los focos. Se utilizan para enfocar la luz en áreas definidas, en objetos sobresalientes en condiciones profesionales. Esta iluminación de alto rendimiento requiere una calidad de luz definida, que incluya temperaturas ajustables de color correlacionadas (CCT), de alto índice de reproducción cromática (CRI), altas eficiencias, y colores vivos y brillantes. En el paquete LED varios chips de diferentes colores (rojo, azul, fósforo convertido) se combinan para cumplir con la distribución de energía espectral con alto CRI. Para colimar la luz en los puntos concretos deseados con un ángulo de emisión determinado, se utilizan blancos sintonizables y diversos colores de luz y ópticas secundarias. La combinación de una fuente LED de varios colores con elementos ópticos puede causar falta de homogeneidad cromática en la distribución espacial y angular de la luz, que debe resolverse en el diseño óptico. Sin embargo, no hay necesidad de uniformidad perfecta en el punto de luz debido al umbral en la percepción visual del ojo humano. Por lo tanto, se requiere una descripción matemática del nivel de uniformidad del color con respecto a la percepción visual. Esta tesis está organizada en siete capítulos. Después de un capítulo inicial que presenta la motivación que ha guiado la investigación de esta tesis, en el capítulo 2 se presentan los fundamentos científicos de la uniformidad del color en luces concentradas, como son: el espacio de color aplicado CIELAB, la percepción visual del color, los fundamentos de diseño de focos respecto a los motores de luz y ópticas no formadoras de imágenes, y los últimos avances en la evaluación de la uniformidad del color en el campo de los focos. El capítulo 3 desarrolla diferentes métodos para la descripción matemática de la distribución espacial del color en un área definida, como son la diferencia de color máxima, la desviación media del color, el gradiente de la distribución espacial de color, así como la suavidad radial y axial. Cada función se refiere a los diferentes factores que influyen en la visión, los cuales necesitan un tratamiento distinto que el de los datos que se tendrán en cuenta, además de funciones de ponderación que pre- y post-procesan los datos simulados o medidos para la reducción del ruido, la luminancia de corte, la aplicación de la ponderación de luminancia, la función de sensibilidad de contraste, y la función de distribución acumulativa. En el capítulo 4, se obtiene la función de mérito Usl para la estimación de la uniformidad del color percibida en focos. Se basó en los resultados de dos conjuntos de experimentos con factor humano realizados para evaluar la percepción visual de los sujetos de los patrones de focos típicos. El primer experimento con factor humano dio lugar al orden de importancia percibida de los focos. El orden de rango percibido se utilizó para correlacionar las descripciones matemáticas de las funciones básicas y la función ponderada sobre la distribución espacial del color, que condujo a la función Usl. El segundo experimento con factor humano probó la percepción de los focos bajo condiciones ambientales diversas, con el objetivo de proporcionar una escala absoluta para Usl, para poder así sustituir la opinión subjetiva personal de los individuos por una función de mérito estandarizada. La validación de la función Usl se presenta en relación con el alcance de la aplicación y condiciones, así como las limitaciones y restricciones que se realizan en el capítulo 5. Se compararon los datos medidos y simulados de varios sistemas ópticos. Se discuten los campos de aplicación , así como validaciones y restricciones de la función. El capítulo 6 presenta el diseño del sistema de focos y su optimización. Una evaluación muestra el análisis de sistemas basados en el reflector y la lente TIR. Los sistemas ópticos simulados se comparan en la uniformidad del color Usl, sensibilidad a las sombras coloreadas, eficiencia e intensidad luminosa máxima. Se ha comprobado que no hay un sistema único que obtenga los mejores resultados en todas las categorías, y que una excelente uniformidad de color se pudo alcanzar por la conjunción de dos sistemas diferentes. Finalmente, el capítulo 7 presenta el resumen de esta tesis y la perspectiva para investigar otros aspectos. ABSTRACT Illumination with light-emitting diodes (LED) is more and more replacing traditional light sources. They provide advantages in efficiency, energy consumption, design, size and light quality. For more than 50 years, researchers have been working on LED improvements. Their main relevance for illumination is rapidly increasing. This thesis is focused on one important field of application which are spotlights. They are used to focus light on defined areas, outstanding objects in professional conditions. This high performance illumination required a defined light quality including tunable correlated color temperatures (CCT), high color rendering index (CRI), high efficiencies and bright, vivid colors. Several differently colored chips (red, blue, phosphor converted) in the LED package are combined to meet spectral power distribution with high CRI, tunable white and several light colors and secondary optics are used to collimate the light into the desired narrow spots with defined angle of emission. The combination of multi-color LED source and optical elements may cause chromatic inhomogeneities in spatial and angular light distribution which needs to solved at the optical design. However, there is no need for perfect uniformity in the spot light due to threshold in visual perception of human eye. Therefore, a mathematical description of color uniformity level with regard to visual perception is required. This thesis is organized seven seven chapters. After an initial one presenting the motivation that has guided the research of this thesis, Chapter 2 introduces the scientific basics of color uniformity in spot lights including: the applied color space CIELAB, the visual color perception, the spotlight design fundamentals with regards to light engines and nonimaging optics, and the state of the art for the evaluation of color uniformity in the far field of spotlights. Chapter 3 develops different methods for mathematical description of spatial color distribution in a defined area, which are the maximum color difference, the average color deviation, the gradient of spatial color distribution as well as the radial and axial smoothness. Each function refers to different visual influencing factors, and they need different handling of data be taken into account, along with weighting functions which pre- and post-process the simulated or measured data for noise reduction, luminance cutoff, the implementation of luminance weighting, contrast sensitivity function, and cumulative distribution function. In chapter 4, the merit function Usl for the estimation of the perceived color uniformity in spotlights is derived. It was based on the results of two sets of human factor experiments performed to evaluate the visual perception of typical spotlight patterns by subjects. The first human factor experiment resulted in the perceived rank order of the spotlights. The perceived rank order was used to correlate the mathematical descriptions of basic functions and weighted function concerning the spatial color distribution, which lead to the Usl function. The second human factor experiment tested the perception of spotlights under varied environmental conditions, with to objective to provide an absolute scale for Usl, so the subjective personal opinion of individuals could be replaced by a standardized merit function. The validation of the Usl function is presented concerning the application range and conditions as well as limitations and restrictions in carried out in chapter 5. Measured and simulated data of various optical several systems were compared. Fields of applications are discussed as well as validations and restrictions of the function. Chapter 6 presents spotlight system design and their optimization. An evaluation shows the analysis of reflector-based and TIR lens systems. The simulated optical systems are compared in color uniformity Usl , sensitivity to colored shadows, efficiency, and peak luminous intensity. It has been found that no single system which performed best in all categories, and that excellent color uniformity could be reached by two different system assemblies. Finally, chapter 7 summarizes the conclusions of the present thesis and an outlook for further investigation topics.

Background foreground segmentation with RGB-D Kinect data: An efficient combination of classifiers

Low cost RGB-D cameras such as the Microsoft’s Kinect or the Asus’s Xtion Pro are completely changing the computer vision world, as they are being successfully used in several applications and research areas. Depth data are particularly attractive and suitable for applications based on moving objects detection through foreground/background segmentation approaches; the RGB-D applications proposed in literature employ, in general, state of the art foreground/background segmentation techniques based on the depth information without taking into account the color information. The novel approach that we propose is based on a combination of classifiers that allows improving background subtraction accuracy with respect to state of the art algorithms by jointly considering color and depth data. In particular, the combination of classifiers is based on a weighted average that allows to adaptively modifying the support of each classifier in the ensemble by considering foreground detections in the previous frames and the depth and color edges. In this way, it is possible to reduce false detections due to critical issues that can not be tackled by the individual classifiers such as: shadows and illumination changes, color and depth camouflage, moved background objects and noisy depth measurements. Moreover, we propose, for the best of the author’s knowledge, the first publicly available RGB-D benchmark dataset with hand-labeled ground truth of several challenging scenarios to test background/foreground segmentation algorithms.

La representación de la arquitectura moderna : la villa Stein-de Monzie en "L'Oeuvre Complète" de Le Corbusier y Pierre Jeanneret : influencia de la visión cinematográfica

Esta tesis doctoral trata de investigar cuánto hubo de presencia del cine en el pensamiento de Le Corbusier y Pierre Jeanneret, a la hora de acometer la publicación y maquetación de las páginas dedicadas a la Villa Stein-de Monzie en Garches, en “Le Corbusier et Pierre Jeanneret. Oeuvre Complète 1910-1929”. Qué mecanismos cinematográficos pusieron en juego, cuando montaban las páginas de L´Oeuvre Complète. Más que encontrar elementos cinematográficos utilizados de manera directa; el objetivo de esta tesis es profundizar en los mecanismos, procedimientos, sistemas de generación de ideas a lo largo del proceso de proyecto; en las maneras de percibir y experimentar los espacios, o de observar las formas. El armazón lo compone por lo tanto el análisis del modo en que Le Corbusier representa la villa en L´Oeuvre Complète, sus intenciones y la función pedagógica de este modo de representar; así como sus diferencias con respecto a lo realmente construido. Una realidad elaborada sobre un tablero; maquetando su representación, eligiendo los fragmentos, y componiendo las láminas (cercana a la de un director de cine). La justificación del objeto a estudiar se plantea en el primer capítulo: L´Oeuvre Complète (1937), la reedición en francés, alemán e inglés de la primera edición en alemán, Ihr Gesamtes Werk (1929).Se establecen las intenciones de Le Corbusier de que se convierta en un modelo de Tratado de Arquitectura Moderna, eminentemente visual. Se estudian los mecanismos formales y geométricos de composición del libro, y el modo en el que L´Oeuvre Complète debe ser leída. El desarrollo de los siguientes capítulos (del 2 al 9) recoge el método principal de investigación de esta tesis, basado en una lectura longitudinal, crítica y sistemática, a partir de la observación atenta de la representación de la villa Stein-de Monzie en Garches, en las páginas nº 140 a 149 de L´Oeuvre Complète. Se efectúa mediante un desarrollo lineal y secuenciado, como si de un guión cinematográfico se tratara. Cada capítulo describe y analiza cada uno de los diferentes fragmentos, permitiendo al mismo tiempo enlazar temas de interés que ayudan a comprender aspectos de la villa de Garches, de su concepción en la intensa labor de proyecto (con numerosas variantes y propuestas), e incluso de su aparición en el cine. Además, la tesis arroja luz sobre unos documentos bastante desconocidos: las láminas de la colección del Museo Cooper-Hewitt de nueva York, para la villa de Garches. El análisis de la presentación de la villa de Garches en L´Oeuvre Complète, constata que para Le Corbusier, el fragmento, per se, ha de ser perfecto, produciendo la máxima emoción. Como un prestidigitador, Le Corbusier los manipula, o le niega información al espectador mediante el uso de la elipsis en el relato. Los textos concatenan las imágenes, soportan el hilo de la narración. Los bocetos quieren siempre seducir al espectador: son dibujos que rezuman vitalidad, con una técnica muy cercana a la ligne claire del cómic. Las plantas son un laboratorio para demostrar su jerarquía y su libertad de composición; eliminando elementos, distorsionando la valoración de líneas y apareciendo algún elemento no ejecutado. Los alzados, esquemáticos y abstractos, demuestran el control de la geometría para garantizar la emoción. Las fotografías son controladas en su fase de captura (elección del punto de vista, cuidada puesta en escena de los objetos, composición con la luz, uso de las sombras para la aparición del fuera de campo); pero también en la fase de postproducción y edición, donde son cortadas, alisadas superficies, borrando o dibujando elementos sobre ellas. El montaje compone asimismo una representación dinámica, fragmentada y múltiple de la villa. Como sucede en el cine, los fragmentos sólo encuentran su razón de ser una vez son re-creados y montados en la cabeza del espectador. La falta de raccord es un mecanismo buscado por Le Corbusier, trasladando a la representación una de las primordiales características de la villa de Garches: su permanente dualidad simultánea. Todos estos mecanismos son desplegados por Le Corbusier, para ofrecer una versión idealizada de la villa, que recoja todas las virtudes de los distintos proyectos e incorpore el factor tiempo. ABSTRACT This doctoral thesis tries to investigate how much the cinema affected Le Corbusier and Pierre Jeanneret´s thoughts, at the moment of undertaking the publication and layout of the pages dedicated to the villa Stein-de Monzie in Garches, in the book “Le Corbusier et Pierre Jeanneret. Oeuvre Complète 1910-1929”. Which cinematographic mechanisms they brought into play, when they were mounting those pages. Instead of finding cinematographic elements, used directly; the aim of this thesis is to go deeply into the mechanisms, methods, systems of generation of ideas along the project process; into the ways of seeing and feeling the spaces, or of watching the forms. The body is composed therefore by the analysis of the way in which Le Corbusier represents the villa in L'Oeuvre Complète, his intentions and the pedagogic function of that way of representation; as well as its differences with the real built villa. One reality elaborated on a board; laying out its representation, choosing the fragments, and composing the sheets (near to the work of a director of cinema). The justification of the object to studying appears in the first chapter: L'Oeuvre Complète (1937), the reissue in French, German and English of the first edition in German, Ihr Gesamtes Werk (1929). This chapter shows the intentions of Le Corbusier of turning the book into a model of modern architecture, highly visual. The formal and geometric mechanisms of composition of the book are studied, and the way in which L'Oeuvre Complète must be read. The development of the following chapters (from 2 to 9) gathers the principal method of investigation of this thesis, based on a longitudinal, critical and systematic reading; from the watching of the representation of the villa Stein-de Monzie in Garches, in the pages nr. 140 to 149 of L'Oeuvre Complète. It is carried out by a linear and sequenced development, as a cinematographic script. Every chapter describes and analyzes each of the different fragments, allowing at the same time to connect interesting issues that help to understand aspects of the villa in Garches, of its conception in the intense project process (with numerous variants and designs), and even of its appearance in films. Also, the thesis throws light on some unknown documents: the sheets of the collection of the Museum Cooper-Hewitt in New York, for the villa in Garches. The analysis of the presentation of the villa in Garches in L'Oeuvre Complète, proves that for Le Corbusier, the fragment, itself, has to be perfect, getting the maximum emotion. As a prestidigitator, Le Corbusier manipulates them, or denies information to the spectator by means of the use of the ellipsis in the story. The texts concatenate the images, support the thread of the story. The sketches always attempt to seduce the spectator: they are drawings that leak vitality, with lines very near to the ligne claire of the cómic. The plans are a laboratory to demonstrate their hierarchy and their freedom of composition; deleting elements, distorting the thickness of lines and showing some not executed elements. The elevations, schematic and abstract, shows the control of the geometry to guarantee the emotion in architecture. The pictures are controlled in their instant of capture (choice of the point of view, elegant mise-en-scène of the objects, composition with light, use of the shadows for the appearance of out of vision); but also in the postproduction and edition time, when surfaces are cut, smoothing, erasing or drawing elements in them. The montage composes in the same way a dynamic, fragmented and multiple representation of the villa. As in the films, the fragments only find their raison d'être once they have been re-created and mounted into the mind of the viewer. The continuity error is a mechanism allowed by Le Corbusier, transfering to the representation in the book one of the basic characteristics of the villa in Garches: its constant simultaneous duality. All these methods are displayed by Le Corbusier, to offer an idealized version of the villa, which gathers all the virtues of the different projects, and incorporates the time factor.

The extraordinarily rapid disappearance of entoptic images.

It has been known for more than 40 years that images fade from perception when they are kept at the same position on the retina by abrogating eye movements. Although aspects of this phenomenon were described earlier, the use of close-fitting contact lenses in the 1950s made possible a series of detailed observations on eye movements and visual continuity. In the intervening decades, many investigators have studied the role of image motion on visual perception. Although several controversies remain, it is clear that images deteriorate and in some cases disappear following stabilization; eye movements are, therefore, essential to sustained exoptic vision. The time course of image degradation has generally been reported to be a few seconds to a minute or more, depending upon the conditions. Here we show that images of entoptic vascular shadows can disappear in less than 80 msec. The rapid vanishing of these images implies an active mechanism of image erasure and creation as the basis of normal visual processing.

Nuevos enfoques en gestión turística: el Programa de Agrupaciones Empresariales Innovadoras en España

Este estudio se enmarca en el análisis de las nuevas políticas de innovación aplicadas al turismo en España. El objetivo fundamental es evaluar la política reciente de apoyo a la creación y consolidación de Agrupaciones Empresariales Innovadoras en el ámbito del turismo, el Programa AEIs, atendiendo a su singularidad, las características de las AEIs resultantes y la valoración de sus responsables. El análisis ofrece luces y sombras y concluye con argumentos para repensar este tipo de políticas, así como con elementos de discusión interesantes en torno a la innovación derivada de los procesos de colaboración en turismo.

A perspectiva linear e orgãnica na conceção do desenho de paisagem

This dissertation was primarily engaged in the study of linear and organic perspective applied to the drawing of landscape, considering the perspective as a fundamental tool in order to graphically materialize sensory experiences offered by the landscape / place to be drawn. The methodology consisted initially in the investigation of perspective theories and perspective representation methods applied to landscape drawing, followed by practical application to a specific case. Thus, within the linear perspective were analyzed and explained: the visual framing, the methods of representation based on the descriptive geometry and also the design of shadows and reflections within the shadows. In the context of organic perspective were analyzed and described techniques utilizing depth of field, the color, or fading and overlapping and light-dark so as to add depth to the drawing. It was also explained a set of materials, printing techniques and resources, which by means of practical examples executed by different artists over time, show the perspectives’ drawings and application of theory. Finally, a set of original drawings was prepared in order to represent a place of a specific case, using for this purpose the theories and methods of linear and organic perspective, using different materials and printing techniques. The drawings were framed under the "project design", starting with the horizontal and vertical projections of a landscape architecture design to provide different views of the proposed space. It can be concluded that the techniques and methods described and exemplified, were suitable, with some adjustments, to the purpose it was intended, in particular in the landscape design conception, bringing to reality the pictorial sense world perceived by the human eye

“Walden”: The «Art of Living»

Henry David Thoreau and his masterpiece, Walden, are both deeply embedded in our lives. It’s almost impossible today to perform a candid walk through the pages of the book that brings in its title the name of the beautiful lake, near Concord, without carrying to our contemporary reading the constellation of fears that haunt us. We are the fragile inhabitants of the grim and probably desperate, “Anthropocene era”2. How can we follow the thoughts and steps from the solitary friend and disciple of Emerson, without seeing him as a forefather of our anguish before the future, seemingly captured by the shadows of economic doom and environmental collapse?

South College

South Wing, also called South College, built in 1849; demolished in 1950. Male person in image. On verso: Evidently the old South Wing of "South College" taken prior to 1871. The view, in the opinion of William C. Hood, who studied the shadows, from the northwest. Wm. Shaw, 11/30/37

Mechanical drawing ...

pt. 1. Use of instruments, lettering, geometrical problems and projections. -- pt. 2. Problems in descriptive geometry, shades and shadows, and perspective. -- pt. 3. Working drawings.