Mass movement characterization using a reflexion and refraction seismic survey with the sloping local base level concept

This study proposes a new concept for upscaling local information on failure surfaces derived from geophysical data, in order to develop the spatial information and quickly estimate the magnitude and intensity of a landslide. A new vision of seismic interpretation on landslides is also demonstrated by taking into account basic geomorphic information with a numeric method based on the Sloping Local Base Level (SLBL). The SLBL is a generalization of the base level defined in geomorphology applied to landslides, and allows the calculation of the potential geometry of the landslide failure surface. This approach was applied to a large scale landslide formed mainly in gypsum and situated in a former glacial valley along the Rhone within the Western European Alps. Previous studies identified the existence of two sliding surfaces that may continue below the level of the valley. In this study. seismic refraction-reflexion surveys were carried out to verify the existence of these failure surfaces. The analysis of the seismic data provides a four-layer model where three velocity layers (<1000 ms(-1), 1500 ms(-1) and 3000 ms(-1)) are interpreted as the mobilized mass at different weathering levels and compaction. The highest velocity layer (>4000 ms(-1)) with a maximum depth of similar to 58 m is interpreted as the stable anhydrite bedrock. Two failure surfaces were interpreted from the seismic surveys: an upper failure and a much deeper one (respectively 25 and 50 m deep). The upper failure surface depth deduced from geophysics is slightly different from the results obtained using the SLBL, and the deeper failure surface depth calculated with the SLBL method is underestimated in comparison with the geophysical interpretations. Optimal results were therefore obtained by including the seismic data in the SLBL calculations according to the geomorphic limits of the landslide (maximal volume of mobilized mass = 7.5 x 10(6) m(3)).

Zonas de aludes en la Vallferrera: Clasificación y riesgo geomorfológico

La Vallferrera es una cuenca que se encuentra en el Pirineo Occidental Catalán, limitando al E con Andorra. En ella se ha realizado un estudio de las características de las zonas de aludes, desde dos perspectivas (MASES, 1991): En primer lugar se efectúa una descripción y una clasificación de las diferentes morfologías de las zonas de aludes comparando su distribución con algunos parámetros intrínsecos de la cuenca (litología, relieve preexistente, etc.). Se ha observado que las diferentes morfologías de las zonas de aludes son producto de la adaptación de éstas al relieve glacial preexistente. En segundo lugar se entra en el análisis del riesgo geomorfológico que los aludes comportan en esta zona del Pirineo, identificando cuatro sectores donde el riesgo es alto debido a la interferencia de éstos con la estructura social.

Geomorphological method in the elaboration of hazard maps for flash-floods in the municipality of Jucuarán (El Salvador)

This work deals with the elaboration of flood hazard maps. These maps reflect the areas prone to floods based on the effects of Hurricane Mitch in the Municipality of Jucuarán of El Salvador. Stream channels located in the coastal range in the SE of El Salvador flow into the Pacific Ocean and generate alluvial fans. Communities often inhabit these fans can be affected by floods. The geomorphology of these stream basins is associated with small areas, steep slopes, well developed regolite and extensive deforestation. These features play a key role in the generation of flash-floods. This zone lacks comprehensive rainfall data and gauging stations. The most detailed topographic maps are on a scale of 1:25 000. Given that the scale was not sufficiently detailed, we used aerial photographs enlarged to the scale of 1:8000. The effects of Hurricane Mitch mapped on these photographs were regarded as the reference event. Flood maps have a dual purpose (1) community emergency plans, (2) regional land use planning carried out by local authorities. The geomorphological method is based on mapping the geomorphological evidence (alluvial fans, preferential stream channels, erosion and sedimentation, man-made terraces). Following the interpretation of the photographs this information was validated on the field and complemented by eyewitness reports such as the height of water and flow typology. In addition, community workshops were organized to obtain information about the evolution and the impact of the phenomena. The superimposition of this information enables us to obtain a comprehensive geomorphological map. Another aim of the study was the calculation of the peak discharge using the Manning and the paleohydraulic methods and estimates based on geomorphologic criterion. The results were compared with those obtained using the rational method. Significant differences in the order of magnitude of the calculated discharges were noted. The rational method underestimated the results owing to short and discontinuous periods of rainfall data with the result that probabilistic equations cannot be applied. The Manning method yields a wide range of results because of its dependence on the roughness coefficient. The paleohydraulic method yielded higher values than the rational and Manning methods. However, it should be pointed out that it is possible that bigger boulders could have been moved had they existed. These discharge values are lower than those obtained by the geomorphological estimates, i.e. much closer to reality. The flood hazard maps were derived from the comprehensive geomorphological map. Three categories of hazard were established (very high, high and moderate) using flood energy, water height and velocity flow deduced from geomorphological and eyewitness reports.

Detection of millimetric deformation using a terrestrial laser scanner: experiment and application to a rockfall event

Terrestrial laser scanning (TLS) is one of the most promising surveying techniques for rockslope characterization and monitoring. Landslide and rockfall movements can be detected by means of comparison of sequential scans. One of the most pressing challenges of natural hazards is combined temporal and spatial prediction of rockfall. An outdoor experiment was performed to ascertain whether the TLS instrumental error is small enough to enable detection of precursory displacements of millimetric magnitude. This consists of a known displacement of three objects relative to a stable surface. Results show that millimetric changes cannot be detected by the analysis of the unprocessed datasets. Displacement measurement are improved considerably by applying Nearest Neighbour (NN) averaging, which reduces the error (1¿) up to a factor of 6. This technique was applied to displacements prior to the April 2007 rockfall event at Castellfollit de la Roca, Spain. The maximum precursory displacement measured was 45 mm, approximately 2.5 times the standard deviation of the model comparison, hampering the distinction between actual displacement and instrumental error using conventional methodologies. Encouragingly, the precursory displacement was clearly detected by applying the NN averaging method. These results show that millimetric displacements prior to failure can be detected using TLS.

Rockfall monitoring by Terrestrial Laser Scanning ¿ case study of the basaltic rock face at Castellfollit de la Roca (Catalonia, Spain)

This case study deals with a rock face monitoring in urban areas using a Terrestrial Laser Scanner. The pilot study area is an almost vertical, fifty meter high cliff, on top of which the village of Castellfollit de la Roca is located. Rockfall activity is currently causing a retreat of the rock face, which may endanger the houses located at its edge. TLS datasets consist of high density 3-D point clouds acquired from five stations, nine times in a time span of 22 months (from March 2006 to January 2008). The change detection, i.e. rockfalls, was performed through a sequential comparison of datasets. Two types of mass movement were detected in the monitoring period: (a) detachment of single basaltic columns, with magnitudes below 1.5 m3 and (b) detachment of groups of columns, with magnitudes of 1.5 to 150 m3. Furthermore, the historical record revealed (c) the occurrence of slab failures with magnitudes higher than 150 m3. Displacements of a likely slab failure were measured, suggesting an apparent stationary stage. Even failures are clearly episodic, our results, together with the study of the historical record, enabled us to estimate a mean detachment of material from 46 to 91.5 m3 year¿1. The application of TLS considerably improved our understanding of rockfall phenomena in the study area.

Esquema morfológico de la costa catalana

Presentamos en esta nota un esquema descriptivo de las formas litorales de la costa catalana, elaborado mediante la consulta de las fotografas areas y de trabajos de diversos autores. Los criterios establecidos para la clasificacin de las formas han sido lo ms elementales posible, a fin de obtener un esquema bsico de trabajo para investigaciones posteriores de cualquier tipo.

Las formaciones cuaternarias del delta del Llobregat

E11 esta nota explico de forma muy resumida las principales hipótesis y conclusiones expuestas en la memoria que, sobre el mismo tema y con el mismo título, he realizado como tesis doctoral. Se estudian las características estratigráficas y sedimentológicas del Cuaternario del delta del Llobregat que se desarrolla básicamente sobre las margas azules del Plioceno. Se han diferenciado dos tipos de Cuaternario, uno inferior denominado complejo detrítico inferior que se atribuye al Flandrierise y se caracteriza por la existencia de ciclos transgresivos separados por niveles de estabilización y depósitos regresivos, y un complejo deltaico que incluye una fase transgresiva (10.900 +/- 150 años B.P.) y el delta en sentido estricto, en el que domina la progradación deltaica aunque también incluye períodos de estabilización. Todo este Cuaternario se asocia al ascenso del mar Flandriense que se realizó, no de forma continua sino con etapas de estabilización.

A global marine sedimentary response to the end-Permian mass extinction: Examples from southern Turkey and the western United States

The end-Permian mass extinction greatly diminished marine diversity and brought about a whole-scale restructuring of marine ecosystems; these ecosystem changes also profoundly affected the sedimentary record. Data presented here, attained through facies analyses of strata deposited during the immediate aftermath of the end-Permian mass extinction (southern Turkey) and at the close of the Early Triassic (southwestern United States), in combination with a literature review, show that sedimentary systems were profoundly affected by: (1) a reduction in biotic diversity and abundance and (2) long-term environmental fluctuations that resulted from the end-Permian crisis. Lower Triassic strata display widespread microbialite and carbonate seafloor fan development and contain indicators of suppressed infaunal bioturbation such as flat-pebble conglomerates and wrinkle structures (facies considered unusual in post-Cambrian subtidal deposits). Our observations suggest that depositional systems, too, respond to biotic crises, and that certain facies may act as barometers of ecologic and environmental change independent of fossil assemblage analyses. Close investigation of facies changes during other critical times in Earth history may serve as an important tool in interpreting the ecology of metazoans and their environment.

Radiometric age constraints on mineral growth, metamorphism, and tectonism of the Gummfluh klippe, Brianconnais domain of the Prealpes, Switzerland

A combined Ar-40/Ar-39, K/Ar, Rb/Sr and stable isotope study has been made of white micas from the Gummfluh klippe (Brianconnais domain of the Prealpes), Switzerland. The klippe consists mainly of Mesozoic to early Tertiary carbonate rocks metamorphosed from anchizonal to epizonal conditions. At the base of the klippe is a 10-50 m thick, ductilely deformed marble mylonite containing deformed authigenic quartz segregations. Stable isotope measurements of the coexisting calcite (deltaO-18SMOW=24.5) and quartz (deltaO-18SMOW=28.4) from the mylonite indicate relatively low temperatures (< 300-degreesC) during mylonitization. Analyses of white mica separates of varying size fractions from the mylonitic rocks by K/Ar and Rb/Sr techniques yield ages between 57 and 103 Ma. This variation is correlated with two parameters, the size of the mineral fraction, and the proportion of 2M1 (more phengitic) to 1M (more muscovitic) polytype in the sample. The K/Ar and Rb/Sr ages are generally younger in the smaller size fractions, which also containless 2M1 phengite. High precision Ar-40/Ar-39 age spectra from different size fractions of these micas record three distinct components, a small Hercynian component (ca. 200-300 Ma), a significant Eoalpine component (64-80 Ma) forming Ar-40/Ar-39 age plateaus, and a very minor Tertiary component (ca. 20-40 Ma). Characterization of the samples by SEM indicates the presence of two white mica populations, a coarser grained, deformed, detrital mica that probably corresponds to the 2M1 phengite and a finer grained neoformed 1M mica. Collectively these observations suggest that the Gummfluh samples contain a mixture of detrital phengites of Hercynian age together with neocrystallized muscovites grown during the late Eoalpine metamorphic event followed by minor argon loss during the Tertiary. The main geologic episode recorded in the Ar-40/Ar-39 age spectra of white micas in the mylonite is of Late Cretaceous/Early Tertiary age (64-80 Ma), representing the first reliable Eoalpine ages ever to be reported from the Prealpes. Contrary to tectonic models, the marble mylonite at the base of the Gummfluh klippe appears to be a Cretaceous thrust plane and not the thrust surface formed during transport of the klippe into its present position from the Penninic Alps during the Tertiary. The late Cretaceous thrust developed during marine sedimentation at a depth of 800 m below the seafloor at temperatures of approximately 280-degrees-C, facilitated by warm fluids along the tectonic discontinuity.

Modelling hydrodynamics in the Rio Parana, Argentina : an evaluation and inter-comparison of reduced-complexity and physics based models applied to a large sand-bed river

Depth-averaged velocities and unit discharges within a 30 km reach of one of the world's largest rivers, the Rio Parana, Argentina, were simulated using three hydrodynamic models with different process representations: a reduced complexity (RC) model that neglects most of the physics governing fluid flow, a two-dimensional model based on the shallow water equations, and a three-dimensional model based on the Reynolds-averaged Navier-Stokes equations. Row characteristics simulated using all three models were compared with data obtained by acoustic Doppler current profiler surveys at four cross sections within the study reach. This analysis demonstrates that, surprisingly, the performance of the RC model is generally equal to, and in some instances better than, that of the physics based models in terms of the statistical agreement between simulated and measured flow properties. In addition, in contrast to previous applications of RC models, the present study demonstrates that the RC model can successfully predict measured flow velocities. The strong performance of the RC model reflects, in part, the simplicity of the depth-averaged mean flow patterns within the study reach and the dominant role of channel-scale topographic features in controlling the flow dynamics. Moreover, the very low water surface slopes that typify large sand-bed rivers enable flow depths to be estimated reliably in the RC model using a simple fixed-lid planar water surface approximation. This approach overcomes a major problem encountered in the application of RC models in environments characterised by shallow flows and steep bed gradients. The RC model is four orders of magnitude faster than the physics based models when performing steady-state hydrodynamic calculations. However, the iterative nature of the RC model calculations implies a reduction in computational efficiency relative to some other RC models. A further implication of this is that, if used to simulate channel morphodynamics, the present RC model may offer only a marginal advantage in terms of computational efficiency over approaches based on the shallow water equations. These observations illustrate the trade off between model realism and efficiency that is a key consideration in RC modelling. Moreover, this outcome highlights a need to rethink the use of RC morphodynamic models in fluvial geomorphology and to move away from existing grid-based approaches, such as the popular cellular automata (CA) models, that remain essentially reductionist in nature. In the case of the world's largest sand-bed rivers, this might be achieved by implementing the RC model outlined here as one element within a hierarchical modelling framework that would enable computationally efficient simulation of the morphodynamics of large rivers over millennial time scales. (C) 2012 Elsevier B.V. All rights reserved.

Valoriser le géopatrimoine par la médiation indirecte et la visualisation des objets géomorphologiques

Résumé: Valoriser le géopatrimoine par la médiation indirecte et la visualisation des objets géomorphologiques Le géopatrimoine regroupe des objets géologiques lato sensu auxquels certaines valeurs sont attribuées, en fonction de leur intérêt pour la science, de leur rareté, de leurs particularités culturelles ou écologiques, etc. Valoriser le géopatrimoine signifie avant tout faire partager cette approche aux non-spécialistes, en expliquant ce qui fait la valeur de ces objets. Cette valorisation peut s'effectuer, entre autres, sous la forme d'une activité touristique et contribuer ainsi au développement régional. Faire comprendre l'origine, la singularité et la valeur des formes du relief implique le recours à une communication éducative, désignée par le terme de médiation. Les implications de la dimension éducative du processus, comme la prise en compte des connaissances et attentes du public, la création d'un environnement favorable à l'apprentissage ou l'attractivité du contenu, sont souvent négligées. Du point de vue conceptuel, un modèle de la médiation indirecte (c'est-à-dire au moyen de supports médiatiques) a été proposé et appliqué au développement empirique de produits de médiation et à leur évaluation. Ce modèle ne garantit pas la réussite de la communication éducative, mais contribue à créer un cadre favorable au processus. De plus, plusieurs lignes directrices pour le choix du type de média et sa mise en forme ont été définies sur la base d'une compilation de résultats de la psychologie cognitive sur l'usage des médias pour l'apprentissage. Des méthodes qualitatives et quantitatives variées ont été mobilisées : enquêtes par questionnaire ex situ et in situ, auprès des visiteurs de géomorphosites de montagne, réalisation de médias interactifs testés ensuite auprès de divers publics (parcours enregistré, pré- et post-questionnaires) et entretiens collectifs. Les résultats obtenus éclairent divers aspects de la problématique. L'étude du public a montré, par exemple, que le géotourisme possède un réel public parmi les visiteurs des sites de montagnes : trois-quarts d'entre eux expriment de l'intérêt pour des explications sur la géologie et l'évolution du paysage. Cette thèse a exploré ces aspects liés au processus d'apprentissage en se focalisant sur les médias visuels, surtout interactifs. La plupart des médias visuels couramment utilisés en géomorphologie ont été considérés. Le développement de versions interactives de ces médias sous forme d'applications web a fourni un aperçu concret des possibilités des nouvelles technologies. Les utilisateurs apprécient en particulier a richesse du contenu, le haut degré d'interactivité et la variété de ces applications. De tels médias incitent à visiter le site naturel et semblent aussi répondre aux intérêts de publics variés. Abstract: Geoheritage promotion through non-personal interpretation and visualisation of geomorphological features Geoheritage concerns all geological features lato sensu to which some values are attributed, according to their scientific interest, their rarity, their cultural or ecological dimensions, etc. Geoheritage promotion implies sharing this point of view with non-specialists, explaining what gives value to those objects. Geotourism is one of the many ways to achieve geoheritage promotion, while contributing also to regional development. In order to make non-specialists understand the origin, the specificity and the value of landforms, educational communication is needed, that is called interpretation (French: médiation). This education dimension has several, and often neglected, implications, like taking into account public's knowledge and expectations, creating a favourable learning environment, attractive design, etc. From the conceptual point of view, a model for non-personal interpretation has been proposed and applied for the empirical development and for the assessment of interpretive products. This model does not guarantee success of educational communication, but help creating a favourable environment for this process. Moreover, some guidelines were defined from a compilation of several results of cognitive psychology on media use for learning. They guide the choice of the kind of media and its design. Several qualitative and quantitative methods were applied: survey questionnaires ex situ and in situ by mountain geomorphosites visitors, interactive medias developed and then tested by different kinds of users (with usertracking, pre- and post-survey questionnaires), group interviews. The results answered different aspects of the research questions. Visitor surveys revealed for example that geotourism could attract many visitors of mountain areas: three quarters of them say they are interested in getting explanations about geology and landscape (in particular its dynamic dimensions). This thesis examined those aspects with a focus on visual medias, both statics and interactive. Most of currently used medias in geomorphology were considered. Interactive versions of those medias were developed in web applications; they gave a concrete overview on the opportunities that new technologies offer. The content richness, the high interaction level and the diversity of the applications are the most liked aspects by the users. Such medias drive to visit the natural site and seem to correspond to the interests of various kinds of publics. Zusammenfassung: Aufwertung des erdwissenschaftlichen Erbes durch mediale Vermittlung und Visualisierung von geomorphologischen Objekten Das erdwissenschaftliche Erbe besteht aus geologischen Gegebenheiten lato sensu, denen entsprechend ihrer Bedeutung für die Wissenschaft, ihrer Seltenheit, ihrer kulturellen oder ökologischen Besonderheiten usw. bestimmte Werte zugeordnet werden. Das erdwissenschaftliche Erbe aufzuwerten bedeutet in erster Linie, diesen Ansatz Nichtspezialisten näher zu bringen, indem ihnen erklärt wird, was den Wert dieser Gegebenheiten ausmacht. Dies kann etwa im Rahmen eines touristischen Angebots geschehen und so die regionale Entwicklung unterstützen. Um Entstehung, Besonderheit und Wert von Geländeformen verständlich zu machen, wird eine pädagogische Kommunikationsform verwendet, die als mediale Vermittlung (franz. médiation) bezeichnet wird. Die Bedeutung der pädagogischen Dimension des Vermittlungsprozesses wie etwa der Einbezug des Wissens und der Erwartungen des Publikums, die Gestaltung eines positiven Lernklimas oder die Attraktivität des Inhalts wird oft vernachlässigt. Auf konzeptueller Ebene wurde ein Modell der indirekten Interpretation erarbeitet (d. h. anhand von Medien), das bei der empirischen Entwicklung der Interpretationsprodukte und ihrer Evaluation Anwendung fand. Dieses Modell garantiert zwar nicht den Erfolg der pädagogischen Kommunikation. Es trägt aber dazu bei, einen für den Prozess günstigen Kontext zu schaffen. Des Weiteren wurden mehrere Richtlinien für die Wahl des Medientyps und dessen Ausgestaltung anhand einer Zusammenstellung von Resultaten der kognitiven Psychologie über den Gebrauch von Medien in Lernprozessen definiert. Es wurden verschiedene qualitative und quantitative Methoden eingesetzt: Befragung mittels Fragebogen der Besucher von geomorphologischen Geotopen im Gebirge - ex situ und in situ -, Erarbeitung von interaktiven Medien, die anschliessend anhand verschiedener Zielgruppen gestestet wurden (Aufnahme des Besuchparcours, Vor- und Nachfragebögen) sowie kollektive Interviews. Die Ergebnisse geben Aufschluss zu verschiedenen Aspekten der Fragestellung. Die Befragung des Publikums hat zum Beispiel deutlich gemacht, dass der Geotourismus unter den Besuchern von Berggebieten tatsächlich auf eine Nachfrage stösst: drei Viertel von ihnen zeigen ein Interesse für Erläuterungen zur Geologie und der Landschaftsentwicklung. Die vorliegende Doktorarbeit hat die genannten Aspekte der Lernprozesse untersucht, wobei der Fokus auf visuellen, insbesondere interaktiven Medien lag. Die meisten gängigen visuellen Medien der Geomorphologie wurden berücksichtigt. Die Entwicklung von interaktiven Versionen dieser Medien in Form von Web-Anwendungen hat die Möglichkeiten der neuen Technologien veranschaulicht. Die Benutzer schätzten insbesondere die Vielfalt des Inhalts, die hohe Interaktivität und die Diversität dieser Anwendungen. Solche Medien laden dazu ein, ein Naturgebiet zu besuchen und scheinen den Interessen der verschiedenen Publikumsgruppen entgegenzukommen.