Low postseroconversion CD4 count and rapid decrease of CD4 density identify HIV+ fast progressors.

CD4 expression in HIV replication is paradoxical: HIV entry requires high cell-surface CD4 densities, but replication requires CD4 down-modulation. However, is CD4 density in HIV+ patients affected over time? Do changes in CD4 density correlate with disease progression? Here, we examined the role of CD4 density for HIV disease progression by longitudinally quantifying CD4 densities on CD4+ T cells and monocytes of ART-naive HIV+ patients with different disease progression rates. This was a retrospective study. We defined three groups of HIV+ patients by their rate of CD4+ T cell loss, calculated by the time between infection and reaching a CD4 level of 200 cells/microl: fast (<7.5 years), intermediate (7.5-12 years), and slow progressors (>12 years). Mathematical modeling permitted us to determine the maximum CD4+ T cell count after HIV seroconversion (defined as "postseroconversion CD4 count") and longitudinal profiles of CD4 count and density. CD4 densities were quantified on CD4+ T cells and monocytes from these patients and from healthy individuals by flow cytometry. Fast progressors had significantly lower postseroconversion CD4 counts than other progressors. CD4 density on T cells was lower in HIV+ patients than in healthy individuals and decreased more rapidly in fast than in slow progressors. Antiretroviral therapy (ART) did not normalize CD4 density. Thus, postseroconversion CD4 counts define individual HIV disease progression rates that may help to identify patients who might benefit most from early ART. Early discrimination of slow and fast progressors suggests that critical events during primary infection define long-term outcome. A more rapid CD4 density decrease in fast progressors might contribute to progressive functional impairments of the immune response in advanced HIV infection. The lack of an effect of ART on CD4 density implies a persistent dysfunctional immune response by uncontrolled HIV infection.

Nanomotors: new strategies of (bio)sensing based on motion

Nanomotors are nanoscale devices capable of converting energy into movement and forces. Among them, self-propelled nanomotors offer considerable promise for developing new and novel bioanalytical and biosensing strategies based on the direct isolation of target biomolecules or changes in their movement in the presence of target analytes. The mainachievements of this project consists on the development of receptor-functionalized nanomotors that offer direct and rapid target detection, isolation and transport from raw biological samples without preparatory and washing steps. For example, microtube engines functionalized with aptamer, antibody, lectin and enzymes receptors were used for the direct isolation of analytes of biomedical interest, including proteins and whole cells, among others. A target protein was also isolated from a complex sample by using an antigen-functionalized microengine navigating into the reservoirs of a lab-on-a-chip device. The new nanomotorbased target biomarkers detection strategy not only offers highly sensitive, rapid, simple and low cost alternative for the isolation and transport of target molecules, but also represents a new dimension of analytical information based on motion. The recognition events can be easily visualized by optical microscope (without any sophisticated analytical instrument) to reveal the target presence and concentration. The use of artificial nanomachines has shown not only to be useful for (bio)recognition and (bio)transport but also for detection of environmental contamination and remediation. In this context, micromotors modified with superhydrophobic layer demonstrated that effectively interacted, captured, transported and removed oil droplets from oil contaminated samples. Finally, a unique micromotor-based strategy for water-quality testing, that mimics live-fish water-quality testing, based on changes in the propulsion behavior of artificial biocatalytic microswimmers in the presence of aquatic pollutants was also developed. The attractive features of the new micromachine-based target isolation and signal transduction protocols developed in this project offer numerous potential applications in biomedical diagnostics, environmental monitoring, and forensic analysis.

Intermittent atrial tachycardia promotes repolarization alternans and conduction slowing during rapid rates, and increases susceptibility to atrial fibrillation in a free-behaving sheep model.

INTRODUCTION: Paroxysmal atrial fibrillation (AF) may be triggered by intermittent atrial tachycardia, and ultimately lead to persistent AF. However, the mechanisms by which intermittent atrial tachycardia promotes sustained AF are not well understood. METHODS AND RESULTS: Eight sheep were chronically implanted with 2 pacemakers for the recording of broadband right atrial unipolar electrograms, and for the delivery of electrophysiological stimulation protocols and intermittent right atrial tachycardia. Right atrial kinetics of activation recovery interval (ARI) as a surrogate for action potential duration, of conduction time and velocity, and of repolarization alternans were analyzed at incremental pacing rates during the remodeling process induced by weeks of intermittent atrial tachycardia until the development of sustained AF. Intermittent atrial tachycardia decreased ARI and blunted its rate adaptation, facilitated atrial capture, and slowed conduction at high rates, and increased susceptibility to pacing-induced AF. In spite of blunted ARI rate adaptation, right atrial repolarization alternans was maintained during remodeling, and further increased in magnitude just before rapid pacing-induced AF. CONCLUSION: This study suggests that weeks of intermittent right atrial tachycardia result in a gradual electrical remodeling favorable for wavebreaks and reentry that may facilitate fibrillation.

The Rapid Rise of China’s Dairy Sector: Factors Behind the Growth in Demand and Supply, May 2005

With the rapid growth in China’s dairy industry, a number of recent papers have addressed either the supply or the demand trends for dairy products in China. None, however, presents a systematic explanation for the recent growth in both the supply and demand for dairy products. The goal of this paper is to sketch a more comprehensive picture of China’s dairy sector and to assess the nature of the sector’s development in the coming decades. Drawing upon several empirical studies, we examine the trends in dairy product consumption to create a composite picture of the factors underlying the recent growth. We also empirically investigate the sources of production gains in milk supply and assess the relative importance of expanding herd size, changes in the nature of production, technological change, and improvements in efficiency to the overall growth of milk production.

Constraints on the late thermotectonic evolution of the Western Alps - Evidence for episodic rapid uplift

Forty-two new apatite and zircon fission track ages are presented for samples from the Western Alps in southern Switzerland, northern Italy, and southeastern France. Measured ages plotted against assumed closure temperatures yield cooling patterns for the final cooling, uplift, and exhumation of the Western Alps. Similar fission track zircon ages in the Penninic Gran Paradiso massif, Dent Blanche nappe, Sesia-Lanzo Zone, and Ivrea Zone indicate cooling of all four units to approximately 225-degrees-C by 33 Ma. Differences in apatite ages reveal differential cooling of the four blocks between 33 Ma and the present. In the Sesia-Lanzo Zone, similarity of apatite ages regardless of elevation, together with near-volcanic confined fission track length patterns suggest rapid cooling and uplift at approximately 25 Ma compared with slow cooling of other Western Alps units around 12 Ma. Uplift is thus not continuous but episodic, often over a short time interval beyond the resolution of other methods. Such episodes of uplift, as revealed here in the Sesia-Lanzo Zone, may be the rule rather than the exception.

Pédiatrie. 3. Le score de McIsaac: une aide à l'indication des tests de diagnostic rapide dans tes angines à streptocoques A [Pediatrics. Using the McIsaac score for the indication of rapid diagnostic testing in children with streptococcal pharyngitis].

The McIsaac scoring system is a tool designed to predict the probability of streptococcal pharyngitis in children aged 3 to 17 years with a sore throat. Although it does not allow the physician to make the diagnosis of streptococcal pharyngitis, it enables to identify those children with a sore throat in whom rapid antigen detection tests have a good predictive value.

A coiled coil trigger site is essential for rapid binding of synaptobrevin to the SNARE acceptor complex.

Exocytosis from synaptic vesicles is driven by stepwise formation of a tight alpha-helical complex between the fusing membranes. The complex is composed of the three SNAREs: synaptobrevin 2, SNAP-25, and syntaxin 1a. An important step in complex formation is fast binding of vesicular synaptobrevin to the preformed syntaxin 1.SNAP-25 dimer. Exactly how this step relates to neurotransmitter release is not well understood. Here, we combined different approaches to gain insights into this reaction. Using computational methods, we identified a stretch in synaptobrevin 2 that may function as a coiled coil "trigger site." This site is also present in many synaptobrevin homologs functioning in other trafficking steps. Point mutations in this stretch inhibited binding to the syntaxin 1.SNAP-25 dimer and slowed fusion of liposomes. Moreover, the point mutations severely inhibited secretion from chromaffin cells. Altogether, this demonstrates that the trigger site in synaptobrevin is crucial for productive SNARE zippering.

Soluble MHC-peptide complexes induce rapid death of CD8+ CTL.

Soluble MHC-peptide (pMHC) complexes, commonly referred to as tetramers, are widely used to enumerate and to isolate Ag-specific CD8(+) CTL. It has been noted that such complexes, as well as microsphere- or cell-associated pMHC molecules compromise the functional integrity of CTL, e.g., by inducing apoptosis of CTL, which limits their usefulness for T cell sorting or cloning. By testing well-defined soluble pMHC complexes containing linkers of different length and valence, we find that complexes comprising short linkers (i.e., short pMHC-pMHC distances), but not those containing long linkers, induce rapid death of CTL. This cell death relies on CTL activation, the coreceptor CD8 and cytoskeleton integrity, but is not dependent on death receptors (i.e., Fas, TNFR1, and TRAILR2) or caspases. Within minutes of CTL exposure to pMHC complexes, reactive oxygen species emerged and mitochondrial membrane depolarized, which is reminiscent of caspase-independent T cell death. The morphological changes induced during this rapid CTL death are characteristic of programmed necrosis and not apoptosis. Thus, soluble pMHC complexes containing long linkers are recommended to prevent T cell death, whereas those containing short linkers can be used to eliminate Ag-specific CTL.

Rapid Improvement in Health-Related Quality of Life in Gouty Arthritis Patients Treated with Canakinumab (ACZ885) Compared to Triamcinolone Acetonide

Background: Gout patients initiating urate lowering therapy have an increased risk of flares. Inflammation in gouty arthritis is induced by interleukin (IL)-1b. Canakinumab inhibits IL-1b effectively in clinical studies. This study compared different doses of canakinumab vs colchicine in preventing flares in gout patients initiating allopurinol therapy.Methods: In this 24 wk double blind study, gout patients (20-79 years) initiating allopurinol were randomized (1:1:1:1:1:1:2) to canakinumab s.c. single doses of 25, 50, 100, 200, 300 mg, or 150mg divided in doses every 4 wks (50þ50þ25þ25mg [q4wk]) or colchicine 0.5mg p.o. daily for 16 wks. Primary outcome was to determine the canakinumab dose giving comparable efficacy to colchicine with respect to number of flares occurring during first 16 wks. Secondary outcomes included number of patients with flares and C-reactive protein (CRP) levels during the first 16 wks.Results: 432 patients were randomized and 391 (91%) completed the study. All canakinumab doses were better than colchicine in preventing flares and therefore, a canakinumab dose comparable to colchicine couldn't be determined. Based on a negative binomialmodel, all canakinumab groups, except 25 mg, reduced the flare rate ratio per patient significantly compared to colchicine group (rate ratio estimates 25mg 0.60, 50mg 0.34, 100mg 0.28, 200mg 0.37, 300mg 0.29, q4wk 0.38; p_0.05). Percentage of patients with flares was lower for all canakinumab groups (25mg 27.3%, 50mg 16.7%, 100mg 14.8%, 200mg 18.5%, 300mg 15.1%, q4wk 16.7%) compared to colchicine group (44.4%). All patients taking canakinumab were significantly less likely to experience at least one gout flare than patients taking colchicine (odds ratio range [0.22 - 0.47]; p_0.05 for all). Median baseline CRP levels were 2.86 mg/L for 25 mg, 3.42 mg/L for 50 mg, 1.76 mg/L for 100 mg, 3.66 mg/L for 200 mg, 3.21 mg/L for 300 mg, 3.23 mg/L for q4wk canakinumab groups and 2.69 mg/L for colchicine group. In all canakinumab groups with median CRP levels above the normal range at baseline, median levels declined within 15 days of treatment and were maintained at normal levels (ULN¼3 mg/L) throughout the 16 wk period. Adverse events (AEs) occurred in 52.7% (25 mg), 55.6% (50 mg), 51.9% (100 mg), 51.9% (200 mg), 54.7% (300 mg), 58.5% (q4wk) of patients on canakinumab vs 53.7% of patients on colchicine. Serious AEs (SAE) were reported in 2 (3.6%; 25 mg), 2 (3.7%, 50 mg), 3 (5.6%, 100 mg), 3 (5.6%, 200 mg), 3 (5.7%, 300 mg), 1 (1.9%, q4wk) patients on canakinumab and in 5 (4.6%) patients on colchicine. 1 fatal SAE (myocardial infarction, not related to study drug) occurred in colchicine group.Conclusions: In this randomized, double-blind active controlled study of flare prevention in gout patients initiating allopurinol therapy, treatment with canakinumab led to a statistically significant reduction in flares compared with colchicine and was well tolerated.Disclosure statement: U.A., A.B., G.K., D.R. and P.S. are employees of and have stock options or bold holdings with Novartis Pharma AG. E.M. is a principal investigator for Novartis Pharmaceuticals Corporation. E.N. has received consulting fees from Roche. N.S. has received research grants from Novartis Pharmaceuticals Corporation. A.S. has received consultancy fees from Novartis Pharma AG, Abbott, Bristol-Myers Squibb, Essex, Pfizer, MSD, Roche, UCB and Wyeth. All other authors have declared no conflicts of interest.

Clients of sex workers in Switzerland: it makes sense to counsel and propose rapid test for HIV on the street, a preliminary report.

BACKGROUND: Clients of street sex workers may be at higher risk for HIV infection than the general population. Furthermore, there is a lack of knowledge regarding HIV testing of clients of sex workers in developed countries. METHOD: This pilot study assessed the feasibility and acceptance of rapid HIV testing by the clients of street-based sex workers in Lausanne, Switzerland. For 5 evenings, clients in cars were stopped by trained field staff for face-to-face interviews focusing on sex-related HIV risk behaviors and HIV testing history. The clients were then offered a free anonymous rapid HIV test in a bus parked nearby. Rapid HIV testing and counselling were performed by experienced nurse practitioners. Clients with reactive tests were offered confirmatory testing, medical evaluation, and care in our HIV clinic. RESULT: We intercepted 144 men, 112 (77.8%) agreed to be interviewed. Among them, 50 (46.6%) had never been tested for HIV. A total of 31 (27.7%) rapid HIV tests were performed, 16 (51.6%) in clients who had not previously been tested. None were reactive. Initially, 19 (16.9%) additional clients agreed to HIV testing but later declined due to the 40-minute queue for testing. CONCLUSION: This pilot study showed that rapid HIV testing in the red light district of Lausanne was feasible, and that the clients of sex workers accepted testing at an unexpectedly high rate. This setting seems particularly appropriate for targeted HIV screening, since more than 40% of the clients had not previously been tested for HIV even though they engaged in sex-related HIV risk behaviour.

Developing a Simple and Rapid Test for Monitoring the Heat Evolution of Concrete Mixtures for Both Laboratory and Field Applications, January 2006

Various test methods exist for measuring heat of cement hydration; however, most current methods require expensive equipment, complex testing procedures, and/or extensive time, thus not being suitable for field application. The objectives of this research are to identify, develop, and evaluate a standard test procedure for characterization and quality control of pavement concrete mixtures using a calorimetry technique. This research project has three phases. Phase I was designed to identify the user needs, including performance requirements and precision and bias limits, and to synthesize existing test methods for monitoring the heat of hydration, including device types, configurations, test procedures, measurements, advantages, disadvantages, applications, and accuracy. Phase II was designed to conduct experimental work to evaluate the calorimetry equipment recommended from the Phase I study and to develop a standard test procedure for using the equipment and interpreting the test results. Phase II also includes the development of models and computer programs for prediction of concrete pavement performance based on the characteristics of heat evolution curves. Phase III was designed to study for further development of a much simpler, inexpensive calorimeter for field concrete. In this report, the results from the Phase I study are presented, the plan for the Phase II study is described, and the recommendations for Phase III study are outlined. Phase I has been completed through three major activities: (1) collecting input and advice from the members of the project Technical Working Group (TWG), (2) conducting a literature survey, and (3) performing trials at the CP Tech Center’s research lab. The research results indicate that in addition to predicting maturity/strength, concrete heat evolution test results can also be used for (1) forecasting concrete setting time, (2) specifying curing period, (3) estimating risk of thermal cracking, (4) assessing pavement sawing/finishing time, (5) characterizing cement features, (6) identifying incompatibility of cementitious materials, (7) verifying concrete mix proportions, and (8) selecting materials and/or mix designs for given environmental conditions. Besides concrete materials and mix proportions, the configuration of the calorimeter device, sample size, mixing procedure, and testing environment (temperature) also have significant influences on features of concrete heat evolution process. The research team has found that although various calorimeter tests have been conducted for assorted purposes and the potential uses of calorimeter tests are clear, there is no consensus on how to utilize the heat evolution curves to characterize concrete materials and how to effectively relate the characteristics of heat evolution curves to concrete pavement performance. The goal of the Phase II study is to close these gaps.

Rapid fatal outcome from pulmonary arteries compression in transitional cell carcinoma.

Transitional cell carcinoma of the urinary bladder is a malignancy that metastasizes frequently to lymph nodes including the mediastinal lymph nodes. This occurrence may produce symptoms due to compression of adjacent structures such as the superior vena cava syndrome or dysphagia from esophageal compression. We report the case of a 59-year-old man with metastatic transitional cell carcinoma for whom mediastinal lymphadenopathy led to pulmonary artery compression and a rapidly fatal outcome. This rare occurrence has to be distinguished from pulmonary embolism, a much more frequent event in cancer patients, in order that proper and prompt treatment be initiated.