A panel method free-wake code for aeroelastic rotor predictions

A panel method free-wake model to analyse the rotor flapping is presented. The aerodynamic model consists of a panel method, which takes into account the three-dimensional rotor geometry, and a free-wake model, to determine the wake shape. The main features of the model are the wake division into a near-wake sheet and a far wake represented by a single tip vortex, and the modification of the panel method formulation to take into account this particular wake description. The blades are considered rigid with a flap degree of freedom. The problem solution is approached using a relaxation method, which enforces periodic boundary conditions. Finally, several code validations against helicopter and wind turbine experimental data are performed, showing good agreement

Determinación paramétrica para el análisis de la viabilidad técnico económica de la implantación de un parque de aprovechamiento energético de corrientes marinas mediante un generador en inmersión con rotor de eje horizontal

La presente Tesis se ha centrado en un análisis de la tecnología para la generación de energía eléctrica utilizando las corrientes marinas. El contenido desarrollado ha consistido en un análisis de las distintas alternativas para poder aprovechar la energía oceánica con especial interés en los desarrollos tecnológicos de las corrientes marinas. Posteriormente se ha descrito un nuevo prototipo, basado en un diseño de un generador en inmersión con rotor de eje horizontal con estructura en Y, denominado proyecto GESMEY. Se han analizado diversas localizaciones para poder implantar un prototipo experimental del proyecto GESMEY, así como las posibles localizaciones para implementar un parque de explotación comercial basado en esta tecnología, llegando a conclusiones importantes referidas a la costa española, y definiendo localizaciones muy interesantes en la costa Escocesa. Finalmente se han analizado diversos parámetros de definición de estos parques de aprovechamiento de la energía, clasificándolos como parámetros técnicos, de ubicación, de utilización, medioambientales y económicos. A la vista de la investigación realizada se ha concluido que hay muchas líneas de investigación que desarrollar, y que desde un punto de vista estratégico hay muchas actuaciones que poner en marcha para potenciar la tecnología de las energías renovables marinas mediante corrientes marinas. ABSTRACT This thesis has focused on an analysis of technology for generating electrical power using ocean currents. The content developed consisted of an analysis of the alternatives to take advantage of ocean energy with special emphasis on the technological developments of ocean currents. Subsequently it described a new prototype, based on a design of a generator rotor immersion horizontal axis Y structure, called GESMEY project. We analyzed different locations to implement an experimental prototype GESMEY project and possible locations to deploy a fleet of commercial exploitation based on this technology, reaching important conclusions regarding the Spanish coast, and defining interesting locations on the coast Scottish. Finally, we have analyzed various parameters defining these parks use of energy, classifying them as technical parameters, location, utilization, environmental and economic. In view of the conducted research has concluded that there are many lines of research to develop, and that from a strategic point of view there are many actions to implement to enhance the technology of marine renewable energies by sea currents.

Análisis de las tecnologías de comunicación entre robots y humanos para su aplicación en grupos de robots

En los últimos tiempos los esfuerzos se están centrando en mejorar los métodos de interacción entre el humano y el robot. El objetivo es conseguir que esa relación parezca simple y que se produzca de la manera más natural posible entre el humano y el robot. Para ese fin se está investigando en métodos de reconocimiento e interpretación del lenguaje corporal, gestos, expresiones de la cara y de sonidos que emite el humano para que la máquina se de cuenta de las intenciones y deseos de los humanos sin recibir órdenes muy específicas. Por otro lado interesa saber cómo se podría aplicar estas técnicas a la comunicación entre robots, pensando aquí en grupos de robots que trabajan en equipos realizando tareas ya asignadas. Estas máquinas se tienen que comunicar para entender las situaciones, detectar necesidades puntuales (si una máquina falla y necesita refuerzo, si pasan acontecimientos inesperados) y reaccionar a ello. Ejecutar estas tareas y realizar las comunicaciones para desarrollar las tareas entre las máquinas resultan especialmente difíciles en entornos hostiles, p.ej. debajo del agua, por lo que el objetivo de este proyecto fin de carrera es investigar las posibles aplicaciones de las técnicas de comunicación entre humanos y máquinas a grupos de robots, como refuerzo o sustitución de los métodos de comunicación clásicos. ABSTRACT. During the last years, many efforts are made to improve the interaction between humans and robots. The aim is to make this relationship simpler and the most natural as possible. For these purpose investigations on the recognition and interpretation of body language, gestures, facial expressions etc are carried out, in order to understand human intentions and desires without receiving specific orders. On the other hand, it is of interest investigate how these techniques could be applied to the communication among robots themselves, e.g. groups of robots which are working in teams resolving certain tasks. These machines have to communicate in order to understand the situations, detect punctual necessities and react to them (e.g. if a machines fails and needs some support, or when some unexpected event happens). The execution of certain tasks and the involved communication, happen to be especially hard in hostile environments, i.e. under water. The objective of this final thesis is to investigate the possible applications of the communication techniques between human and machines to groups of robots, as reinforcement or substitution for the classical communication methods.

Deviations of cup anemometer rotational speed measurements due to steady state harmonic accelerations of the rotor

The measurement deviations of cup anemometers are studied by analyzing the rotational speed of the rotor at steady state (constant wind speed). The differences of the measured rotational speed with respect to the averaged one based on complete turns of the rotor are produced by the harmonic terms of the rotational speed. Cup anemometer sampling periods include a certain number of complete turns of the rotor, plus one incomplete turn, the residuals from the harmonic terms integration within that incomplete turn (as part of the averaging process) being responsible for the mentioned deviations. The errors on the rotational speed due to the harmonic terms are studied analytically and then experimentally, with data from more than 500 calibrations performed on commercial anemometers.

Multiple Robots, Single Operator: Considerations About Information And Commanding

Multiple robot, single operator scenarios suppose a challenge in terms of human factors. Two relevant issues are keeping the situational awareness and managing the workload of operators. In order to address these problems, this work analyses the management of information and commands in multi-robot missions. About the information, this paper proposes a selection based on mission and operator states. Regarding the commands, this work reflects about the levels of automation and the methods of commanding.

New Fault-Resistance Estimation Algorithm for Rotor-Winding Ground-Fault Online Location in Synchronous Machines With Static Excitation

New Fault-Resistance Estimation Algorithm for Rotor-Winding Ground-Fault Online Location in Synchronous Machines With Static Excitation

Electrostatic interactions between rotor and stator in the bacterial flagellar motor

Bacterial flagellar motors rotate, obtaining power from the membrane gradient of protons or, in some species, sodium ions. Torque generation in the flagellar motor must involve interactions between components of the rotor and components of the stator. Sites of interaction between the rotor and stator have not been identified. Mutational studies of the rotor protein FliG and the stator protein MotA showed that both proteins contain charged residues essential for motor rotation. This suggests that functionally important electrostatic interactions might occur between the rotor and stator. To test this proposal, we examined double mutants with charged-residue substitutions in both the rotor protein FliG and the stator protein MotA. Several combinations of FliG mutations with MotA mutations exhibited strong synergism, whereas others showed strong suppression, in a pattern that indicates that the functionally important charged residues of FliG interact with those of MotA. These results identify a functionally important site of interaction between the rotor and stator and suggest a hypothesis for electrostatic interactions at the rotor–stator interface.

Molecular dynamics of a grid-mounted molecular dipolar rotor in a rotating electric field

Classical molecular dynamics is applied to the rotation of a dipolar molecular rotor mounted on a square grid and driven by rotating electric field E(ν) at T ≃ 150 K. The rotor is a complex of Re with two substituted o-phenanthrolines, one positively and one negatively charged, attached to an axial position of Rh\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \setlength{\oddsidemargin}{-69pt} \begin{document} \begin{equation*}{\mathrm{_{2}^{4+}}}\end{equation*}\end{document} in a [2]staffanedicarboxylate grid through 2-(3-cyanobicyclo[1.1.1]pent-1-yl)malonic dialdehyde. Four regimes are characterized by a, the average lag per turn: (i) synchronous (a < 1/e) at E(ν) = |E(ν)| > Ec(ν) [Ec(ν) is the critical field strength], (ii) asynchronous (1/e < a < 1) at Ec(ν) > E(ν) > Ebo(ν) > kT/μ, [Ebo(ν) is the break-off field strength], (iii) random driven (a ≃ 1) at Ebo(ν) > E(ν) > kT/μ, and (iv) random thermal (a ≃ 1) at kT/μ > E(ν). A fifth regime, (v) strongly hindered, W > kT, Eμ, (W is the rotational barrier), has not been examined. We find Ebo(ν)/kVcm−1 ≃ (kT/μ)/kVcm−1 + 0.13(ν/GHz)1.9 and Ec(ν)/kVcm−1 ≃ (2.3kT/μ)/kVcm−1 + 0.87(ν/GHz)1.6. For ν > 40 GHz, the rotor behaves as a macroscopic body with a friction constant proportional to frequency, η/eVps ≃ 1.14 ν/THz, and for ν < 20 GHz, it exhibits a uniquely molecular behavior.

Cálculo da força contra eletromotriz em máquinas síncronas com ímãs na superfície do rotor

O presente trabalho trata do cálculo da força contra eletromotriz em carga de uma máquina síncrona com ímãs na superfície do rotor (cuja forma de onda de força contra eletromotriz é não senoidal) sendo esta alimentada por correntes de fase cujas forma de onda são quadradas. Para conduzir esta investigação e calcular a força contra eletromotriz da máquina em estudo, faz-se uma revisão sobre o Método da Permeabilidade Fixa, método este que permite a linearização do ponto de operação da máquina. Dessa forma, as simulações são conduzidas por meio do método dos elementos finitos e do Método da Permeabilidade Fixa, levando-se em conta a forma de onda da corrente de alimentação. Atenção especial é dada ao modo que se analisa o fluxo concatenado e a forma de obtenção da força contra eletromotriz uma vez que as formas de onda do fluxo concatenado sofrem variações abruptas a cada 60º elétricos. Além destes parâmetros, analisa-se também cada uma das parcelas do torque eletromagnético, i.e., torque mútuo, torque de relutância e torque de borda, sendo realizado ao final do trabalho, uma comparação entre a soma da estimativa de cada parâmetro com o valor do torque eletromagnético obtido por meio de uma simulação não linear.

Planificación y supervisión de flotas de robots autónomos en tareas agrícolas

El control seguro y efectivo de las malas hierbas según los principios establecidos por la Agricultura de Precisión requiere una tecnología específica, avanzada y de coste asumible dentro de los márgenes de beneficio. El uso de plataformas móviles autónomas tanto terrestres como aéreas equipadas con sistemas de percepción innovadores, sistemas inteligentes de toma de decisión y herramientas que permitan la aplicación precisa de los tratamientos herbicidas, reduce el coste asociado a la operación así como los potenciales daños ambientales y el riesgo para los agricultores. Varios son los grupos internacionales de investigación dedicados al desarrollo de tecnologías basadas en sistemas robóticos capaces de optimizar las operaciones complejas implicadas en este tipo de tratamientos de precisión. El desarrollo de sistemas autónomos de ayuda al tratamiento preciso, tanto de cultivos extensivos (malas hierbas) como de leñosos, es el objetivo principal del proyecto RHEA (Robot Fleets for Highly Effective Agriculture and Forestry Management), financiado por el 7º Programa Marco de la CE y dirigido a minimizar los insumos (agroquímicos, combustible, etc.) a la vez que garantizar la calidad y seguridad del producto así como cubrir totalmente el campo independientemente del tamaño que éste tenga. RHEA propone utilizar una flota de robots pequeños/medianos tanto aéreos como terrestres para la inspección/monitorización y posterior aplicación de fitosanitarios, lo que presenta múltiples ventajas frente al tratamiento basado en la habitual máquina de mayores dimensiones y más tradicional. Entre otras, una flota de robots de tamaño pequeño/mediano reduce el impacto sobre la compactación del suelo e interactúa de un modo más seguro con los operarios, ya que la detección e interacción se puede distribuir en varios sistemas de detección y gestión de fallos como los propuestos en la presente tesis. El trabajo de investigación presentado en esta tesis se ha desarrollado dentro de este proyecto europeo y está relacionado con el diseño, desarrollo y evaluación del nivel más alto de la arquitectura RHEA, en otras palabras, con los tres aspectos fundamentales para conseguir que los robots de la flota ejecuten el trabajo eficientemente y sin intervención humana, es decir, con la planificación, la supervisión y la gestión completa e integrada de las tareas de inspección y tratamiento...

Estimación bayesiana de características en robots móviles mediante muestreo de la densidad a posteriori

Comunicación presentada en el I Congrés Català d’Intel·ligència Artificial, Tarragona, Octubre de 1998.

Multi-agent system for control of robots inspired on the distributed activity and hormonal regulation of humans

Robotics is an emerging field with great activity. Robotics is a field that presents several problems because it depends on a large number of disciplines, technologies, devices and tasks. Its expansion from perfectly controlled industrial environments toward open and dynamic environment presents a many new challenges. New uses are, for example, household robots or professional robots. To facilitate the low cost, rapid development of robotic systems, reusability of code, its medium and long term maintainability and robustness are required novel approaches to provide generic models and software systems who develop paradigms capable of solving these problems. For this purpose, in this paper we propose a model based on multi-agent systems inspired by the human nervous system able to transfer the control characteristics of the biological system and able to take advantage of the best properties of distributed software systems. Specifically, we model the decentralized activity and hormonal variation.

Model of Competencies for Decomposition of Human Behavior: Application to Control System of Robots

Humans and machines have shared the same physical space for many years. To share the same space, we want the robots to behave like human beings. This will facilitate their social integration, their interaction with humans and create an intelligent behavior. To achieve this goal, we need to understand how human behavior is generated, analyze tasks running our nerves and how they relate to them. Then and only then can we implement these mechanisms in robotic beings. In this study, we propose a model of competencies based on human neuroregulator system for analysis and decomposition of behavior into functional modules. Using this model allow separate and locate the tasks to be implemented in a robot that displays human-like behavior. As an example, we show the application of model to the autonomous movement behavior on unfamiliar environments and its implementation in various simulated and real robots with different physical configurations and physical devices of different nature. The main result of this study has been to build a model of competencies that is being used to build robotic systems capable of displaying behaviors similar to humans and consider the specific characteristics of robots.

Dynamic Visual Servoing With Chaos Control for Redundant Robots

This paper presents a new dynamic visual control system for redundant robots with chaos compensation. In order to implement the visual servoing system, a new architecture is proposed that improves the system maintainability and traceability. Furthermore, high performance is obtained as a result of parallel execution of the different tasks that compose the architecture. The control component of the architecture implements a new visual servoing technique for resolving the redundancy at the acceleration level in order to guarantee the correct motion of both end-effector and joints. The controller generates the required torques for the tracking of image trajectories. However, in order to guarantee the applicability of this technique, a repetitive path tracked by the robot-end must produce a periodic joint motion. A chaos controller is integrated in the visual servoing system and the correct performance is observed in low and high velocities. Furthermore, a method to adjust the chaos controller is proposed and validated using a real three-link robot.

Control and Guidance of Low-Cost Robots via Gesture Perception for Monitoring Activities in the Home

This paper describes the development of a low-cost mini-robot that is controlled by visual gestures. The prototype allows a person with disabilities to perform visual inspections indoors and in domestic spaces. Such a device could be used as the operator's eyes obviating the need for him to move about. The robot is equipped with a motorised webcam that is also controlled by visual gestures. This camera is used to monitor tasks in the home using the mini-robot while the operator remains quiet and motionless. The prototype was evaluated through several experiments testing the ability to use the mini-robot’s kinematics and communication systems to make it follow certain paths. The mini-robot can be programmed with specific orders and can be tele-operated by means of 3D hand gestures to enable the operator to perform movements and monitor tasks from a distance.