Structural, optical and magnetic properties of pulsed laser deposited Co-doped ZnO films

Zn1−xCoxO films with different Co concentrations (with x=0.00, 0.10, 0.15, and 0.30) were grown by pulsed laser deposition (PLD) technique. The structural and optical properties of the films were investigated by grazing incidence X-ray diffraction (GIXRD), Raman spectroscopy and photoluminescence (PL). The magnetic properties were measured by conventional magnetometry using a SQUID and simulated by ab-initio calculations using Korring–Khon–Rostoker (KKR) method combined with coherent potential approximation (CPA). The effect of Co-doping on the GIXRD and Raman peaks positions, shape and intensity is discussed. PL studies demonstrate that Co-doping induces a decrease of the bandgap energy and quenching of the UV emission. They also suggest the presence of Zn interstitials when x≥0.15. The 10% Co-doped ZnO film shows ferromagnetism at 390 K with a spontaneous magnetic moment ≈4×10−5 emu and coercive field ≈0.17 kOe. The origin of ferromagnetism is explained based on the calculations using KKR method.

Does nitrogen availability have greater control over the formation of tropical heath forests than water stress?A hypothesis based on nitrogen isotope ratios

Global scale analyses of soil and foliage δ15N have found positive relationships between δ15N and ecosystem N loss (suggesting an open N cycle) and a negative relationship between δ15N and water availability. We show here that soils and leaves from tropical heath forests are depleted in 15N relative to 'typical' forests suggesting that they have a tight N cycle and are therefore limited by N rather than by, often suggested, water availability.

Electrochromic devices incorporating biohybrid electrolytes doped with a lithium salt, an ionic liquid or a mixture of both

The sol-gel method was employed in the synthesis of di-urethane cross-linked poly( caprolactone) (PCL(530)/siloxane biohybrid ormolytes incorporating either a mixture of lithium triflate (LiCF3SO3) and the ionic liquid (IL) 1-ethyl-3-methyl imidazolium tetrafluoroborate ([Emim]BF4), or solely with [Emim]BF4 or LiCF3SO3. The ormolyte doped with [Emim]BF4 is thermally more stable and exhibits higher ionic conductivity (4 x 10-4 and 2 x 10-3 S cm-1 at 36 and 98 ºC, respectively) than those containing the LiCF3SO3/[Emim]BF4 mixture or just LiCF3SO3. The three ormolytes were employed in the production of glass/ITO/ormolyte/WO3/ITO/glass electrochromic devices (ECDs) designated as ECD@Y with Y = Li-[Emim]BF4, [Emim]BF4 and Li. The three ECDs displayed fast switching speed (ca. 30 s). ECD@Li-[Emim]BF4 exhibited an electrochromic contrast of 18.4 % and an optical density change of 0.11 in the visible region, the coloration efficiency attained at 555 nm was 159 and 80.2 cm-2 C-1 in the “on” and “off” states, respectively, and the open circuit memory was 48 hours. In the “on” state the CIE 1931 color space coordinates were x = 0.29 and y = 0.30, corresponding to blue color.

Eco-friendly luminescent hybrid materials based on EuIII and LiI co-doped chitosan

Biopolymer-based materials have been of particular interest as alternatives do synthetic polymers due to their low toxicity, biodegradability and biocompatibility. Among them, chitosan is one of the most studied ones and has recently been investigated for the application as solid state polymer electrolytes. Furthermore, it can serve as a host for luminescent species such as rare earth ions, giving rise to materials with increased functionality, of particular interest for electrochemical devices. In this study, we investigate chitosan based luminescent materials doped wit Eu3+ and Li+ triflate salts from the structural, photophysical and conductivity points of view. Because the host presents a broad emission band in the blue to green, while Eu3+ emits in the red, fine tuning of emission colour and/or generation of white light is possible by optimizing composition and excitation scheme. Europium lifetimes (5D0) are in the range 270 – 350 µs and quantum yields are as high as 2%. Although Li+ does not interfere with the luminescent properties, it grants ion-conducting properties to the material suggesting that a combination of both properties could be further explored in multifunctional device.

Lithium-doped silk fibroin films for application in electrochromic devices

Silk fibroin (SF) is a commonly available natural biopolymer produced in specialized glands of arthropods, with a long history of use in textile production and also in health cares. The exceptional intrinsic properties of these fibers, such as self-assembly, machinability, biocompatibility, biodegradation or non-toxicity, offer a wide range of exciting opportunities [1]. It has long been recognized that silk can be a rich source of inspiration for designing new materials with tailored properties, enhanced performance and high added value for targeted applications, opening exciting new prospects in the domain of materials science and related technological fields, including bio-friendly integration, miniaturization and multifunctionalization. In recent years it has been demonstrated that fibroin is an excellent material for active components in optics and photonics devices. Progress in new technological fields such as optics, photonics and electronics are emerging [2,3]. The incorporation of polymer electrolytes as components of various devices (advanced batteries, smart windows, displays and supercapacitors) offers significant advantages with respect to traditional electrolytes, including enhanced reliability and improved safety. SF films are particularly attractive in this context. They have near-perfect transparency across the VIS range, surface flatness (together with outstanding mechanical robustness), ability to replicate patterned substrates and their thickness may be easily tailored from a few nanometers to hundreds of micrometers through spin-casting of a silk solution into subtract. Moreover, fibroin can be added to other biocomponents or salts in order to modify the biomaterial properties leading to optimized and total different functions. Preliminary tests performed with a prototype electrochromic device (ECD) incorporating SF films doped with lithium triflate and lithium tetrafluoroborate (LiTFSI and LiBF4, respectively) as electrolyte and WO3 as cathodic electrochromic layer, are extremely encouraging. Aiming to evaluate the performance of the ion conducting SF membranes doped with LiTFSI and LiBF4 (SF-Li), small ECDs with glass/ITO/WO3/SF-Li/CeO2-TiO2/ITO/glass configuration were assembled and characterized. The device exhibited, after 4500 cycles, the insertion of charge at -3.0 V reached –1.1 mC.cm-2 in 15 s. After 4500 cycles the window glass-staining, glass/ITO/WO3/Fibrin-Li salts electrolyte/CeO2-TiO2/ITO/glass configuration was reversible and featured a T  8 % at λ = 686 nm

The influence of nitrogen and oxygen additions on the thermal characteristics of aluminium-based thin films

The ternary aluminium oxynitride (AlNxOy) system offers the possibility to obtain a wide range of properties by tailoring the ratio between pure Al, AlNx and AlOy and therefore opening a significant number of possible applications. In this work the thermal behaviour of AlNxOy thin films was analysed by modulated infrared radiometry (MIRR), taking as reference the binary AlOy and AlNx systems. MIRR is a non-contact and non-destructive thermal wave measurement technique based on the excitation, propagation and detection of temperature oscillations of very small amplitudes. The intended change of the partial pressure of the reactive gas (N2 and/or O2) influenced the target condition and hence the deposition characteristics which, altogether, affected the composition and microstructure of the films. Based on the MIRR measurements and their qualitative and quantitative interpretation, some correlations between the thermal transport properties of the films and their chemical/physical properties have been found. Furthermore, the potential of such technique applied in this oxynitride system, which present a wide range of different physical responses, is also discussed. The experimental results obtained are consistent with those reported in previous works and show a high potential to fulfil the demands needed for the possible applications of the systems studied. They are clearly indicative of an adequate thermal response if this particular thin film system is aimed to be applied in small sensor devices or in electrodes for biosignal acquisition, such as those for electroencephalography or electromyography as it is the case of the main research area that is being developed in the group.

A systematic study of the structural and magnetic properties of Mn-, Co-, and Ni-Doped Colloidal Fe3O4 nanoparticles

A series of colloidal MxFe3-xO4 (M = Mn, Co, Ni; x = 0–1) nanoparticles with diameters ranging from 6.8 to 11.6 nm was synthesized by hydrothermal reaction in aqueous medium at low temperature (200 °C). Energy-dispersive X-ray microa-nalysis and inductively coupled plasma spectrometry confirms that the actual elemental compositions agree well with the nominal ones. The structural properties of obtained nanoparticles were investigated by using powder X-ray diffraction, Raman scattering, Mössbauer spectroscopy, and electron microscopy. The results demonstrate that our synthesis technique leads to the formation of chemically uniform single-phase solid solution nanoparticles with cubic spinel structure, confirming the intrinsic doping. Magnetic studies showed that, in comparison to Fe3O4, the saturation magnetization of MxFe3-xO4 (M = Mn, Ni) decreases with increasing dopant concentration, while Co-doped samples showed similar saturation magnetizations. On other hand, whereas Mn- and Ni-doped nanoparticles exhibits superparamagnetic behavior at room temperature, ferromagnetism emerges for CoxFe3-xO4 nanoparticles, which can be tuned by the level of Co doping.

Tailored deposition of coloured coatings: on the widening of the available colour range

Dissertação de mestrado integrado em Engenharia de Materiais

Desenvolvimento de microcápsulas ativadas por radiação solar para aplicação em painéis cerâmicos exteriores

Dissertação de mestrado integrado em Engenharia de Materiais

Caracterización genética de la cepa Sinorhizobium meliloti 3DOh13 y evaluación de la capacidad fijadora de nitrógeno en alfalfa. Genetic characterization of the strain Sinorhizobium meliloti 3DOh13 and assessment of the capacity to fix nitrogen in alfalfa.

La provincia de Córdoba participa con aproximadamente el 23 por ciento del área total sembrada anualmente con alfalfa en nuestro país y, en los últimos años, se ha incrementado levemente, en contraste con las provincias de Buenos Aires, Santa Fe y Entre Ríos, donde ha decrecido. La inoculación de este cultivo con cepas del género Sinorhizobium ha permitido mejorar su rendimiento en los suelos de la región semiárida. La utilización para la siembra de semillas preinoculadas con microorganismos de origen extranjero, cuya eficiencia y adaptación a las condiciones locales no siempre se conocen, y con escasa capacidad de competencia ante las cepas naturalizadas, trae como consecuencia un bajo establecimiento de la nodulación y por consiguiente una escasa reposición del nitrógeno removido del suelo. Aún cuando la inoculación está relativamente difundida, en la actualidad no se ha determinado la proporción relativa de nitrógeno fijado por las cepas introducidas respecto de las nativas o naturalizadas, ni la competencia que se genera en el suelo por la ocupación de los sitios potenciales para la formación de nódulos. Nuestra hipótesis de trabajo es: "la inoculación con cepas de Sinorhizobium meliloti debidamente caracterizadas y eficientes en la fijación del nitrógeno atmosférico mejorará el rendimiento de alfalfa en la región centro-sur de Córdoba". Los objetivos de este estudio son caracterizar fenotípica y genotípica el aislamiento Sinorhizobium meliloti 3DOh13 y evaluar su eficiencia simbiótica en el cultivo de alfalfa, mediante ensayos de infectividad, eficiencia y competencia con cepas nativas. La evaluación de la infectividad de la cepa comprende estudios de cinética de la nodulación, número total de nódulos y ubicación de los mismos en experiencias donde las plantas crecen en condiciones de invernáculo sobre un soporte de tierra:arena:perlita (2:1:1). Se realizarán ensayos de competitividad, coinoculando semillas con la cepa DOh13 y otras nativas, en bolsas plásticas con medio mineral en los que se desafiarán los distintos aislamientos. Se inoculan las plantas con sólo dos aislamientos y los nódulos de la raíz principal serán extraídos a fin de aislar los microorganismos ocupantes, los que serán diferenciados por marca de resistencia a antibioticos. La eficiencia en la fijación de nitrógeno será cuantificada por las técnicas de reducción del acetileno en el nódulo y, en caso de ser necesario, se usará el método de Kjeldahl (N total) para la raíz, tejido aéreo o planta entera. La caracterización genotípica de S. meliloti 3DOh13 incluirá métodos de fingerprint de ADN por técnicas de PCR y secuenciamiento del ADNr 16S. Esta investigación permitirá obtener información precisa sobre la respuesta de alfalfa a la inoculación con la cepa de referencia. El producto que se espera obtener es un nuevo inoculante, formulado con una cepa efectiva en la fijación de nitrógeno, debidamente caracterizada y con probada capacidad de adaptación a los suelos de la región

Sulfur fractions and carbon-nitrogen-phosphorus-sulfur relationships in some Brazilian and Iowa soils

O atual conhecimento relativo à distribuição em percentagem das várias frações de enxofre nos solos provem principalmente dos estudos dos solos de regiões temperadas. Em vista disso, este estudo foi conduzido para determinar as frações do S e as relações C-N-P-S em alguns solos da região subtropical dos Estados de São Paulo e do Paraná, Brasil, e comparar estes valores nestes solos com aqueles nos solos do Estado de Iowa, dos Estados Unidos da América do Norte. As análises das frações de enxofre nos solos dos dois países, indicaram que os solos do Brasil contem sulfato inorgânico adsorvido. Expressos como percentagem do S total, os solos do Brasil acusaram de 5 a 23% (média 11%) de S-sulfato inorgânico, de 20 a 65% (média 40%) de S-ester sulfato, de 5 a 12% (média 7%) de S-ligado ao Carbono e de 24 a 59% (média 42%) de S orgânico não identificado. As percentagens correspondentes nos solos de Iowa foram de 2 a 8% (média 5%) de S-sulfato inorgânico, de 43 a 60% (média 50%) de S-ester sufato, de 7 a 18% (média 11%) de enxofre ligado ao carbono e de 30 a 39% (média 34%) de S orgânico, não identificado. Outrossim, não foi encontrado o enxofre inorgânico não-sulfato em nenhum dos solos analisados. Houve grandes variações nas relações C, N, Ρ e S entre solos brasileiros quando comparados com aqueles do Iowa.

Effect of day time on foliar spraying of several levels of nitrogen fertilizer, NPKS solutions and its components, on common bean leaves

An experiment was carried out in order to determine the effect of day time of foliar spraying of several levels of nitrogen fertilizers, N-P-K-S station, and its components on common bean leaves. Results, based on the visual observations, indicated the maximum levels of each fertilizer that did not cause injuries and showed that the foliar spraying early in the morning is the best day time.

Balanç de nitrogen i anàlisi del consum d'aigua al Baix Empordà

El present treball pretén avaluar l’impacte de les activitats agràries sobre les aigües subterrànies, al Baix Empordà. La ramaderia intensiva genera uns residus que l’agricultura no és capaç d’assumir. Els excedents generats s’infiltren al subsòl, generalment en forma de nitrats (NO3-), provocant la contaminació de les aigües subterrànies. Aquesta pot provocar greus problemes ecològics en els sistemes aquàtics, i afectar a la salut humana. S’ha realitzat un balanç de nitrogen per a les zones agrícoles de l’àrea d’estudi, avaluant els diversos processos que incorporen o extreuen nitrogen al sòl. Paral·lelament, s’ha estudiat el consum d’aigua provocat pel diversos sectors presents a la zona d’estudi, per tal d’avaluar quantitativament la pressió que provoquen sobre els aqüífers. Els resultats obtinguts mostren que la majoria de municipis estudiats generen excedents de nitrogen, justificant la presència de nitrats al subsòl.

Liquid nitrogen cryopreservation of Bracoccidioides brasiliensis in Fava's Netto medium

The aplicability of Fava's Netto medium in the liquid nitrogen cryopreservation technique of Paracoccidioides brasiliensis cells was demonstrated.

Eliminació simultània de fòsfor i nitrogen en aigües residuals, utilitzant microorganismes DPAO en un reactor discontinu seqüencial (SBR)

En aquest estudi es realitzà eliminació biològica simultània de fòsfor i nitrogen en un Reactor Discontinu Seqüencial (SBR), el qual conté una biomassa enriquida amb Organismes Desnitrificadors Acumuladors de Fòsfor (DPAO) que utilitzen com a única font de carboni l’àcid propiònic i com acceptors d’electrons: nitrit en la fase anòxica i oxigen en l’aeròbica. L’SBR opera amb cicle de 8 h alternant fase anaeròbica, anòxica i aeròbica. El seguiment del sistema es realitzà mitjançant mesures on-line (titrimetria) i off-line (quantificació d’àcid propiònic, nitrit i fòsfor), utilitzant l’HPLC per quantificar l’àcid propiònic i cromatografia iònica per les mesures de nitrit i fòsfor. Amb aquest sistema es pretén augmentar la captació de fòsfor en la fase anòxica fet que s’aconseguí realitzant diferents canvis al reactor per tal de maximitzar el consum de nitrit en aquesta fase, ja fos allargant el temps de fase o augmentant la concentració de biomassa. Aquest experiment ha suposat un augment de la captació de fòsfor (33 mg P-PO4 3-/L), de l’eliminació neta de fòsfor (17 mg P-PO4 3-/L) i de consum de nitrit (27 mg N-NO2-). Per altra banda, es pretenia veure els efectes a curt termini de l’eliminació de la fase aeròbica a partir del seguiment de 2 cicle puntuals i d’un cicle de 32 h sense fase aeròbica. En ambdós casos s’aconseguí una eliminació neta de fòsfor.