Desenvolvimento de uma EPS especificação de procedimento de soldagem para união de chapas de aço ASTM A131 com processo FCAW

In any welding process is of utmost importance by welders and responsible qualities of the area understand the process and the variables involved in it, in order to have maximum efficiency in welding both in terms of quality as the final cost , never forgetting, of course, the process conditions which the welder or welding operator shall be submitted. Therefore, we sought to understand the variables relevant to the welding process and develop an EPS (Welding Procedure Specification) as ASME IX for cored wire welding process (FCAW Specification AWS) with shielding gas and automated process for base material ASTM a 131, with 5/16 thick, using a single pass weld, for conditions with pre-and post-heating and the destructive testing for verification and analysis of the resulting weld bead

Avaliação do tempo e da concentração do condicionamento com ácido fluorídrico sobre a resistência de união entre cerâmica e cimento resinoso

The aim of this study was to verify through microtensile test the influence of time and concentration of surface conditioning with hydrofluoric acid and its interference in the adhesion of dual resin cement to porcelain.We used 32 bodies of glass-ceramic lithium disilicate system IPS e.max Press LT with dimensions of 6mm thick, 8 mm in length and 8 mm in length, which will be molded to obtain composite resin blocks corresponding to blocks ceramics. Ceramic and resin blocks were divided into 16 groups (n = 4) and numbered according to the concentration of hydrofluoric acid (2.5%, 5%, 7.5% and 10%) and conditioning time (20 seconds, 40 seconds, 1 minute and 2 minutes). The blocks were cleaned in ultrasonic apparatus with distilled water and dried with compressed air, subjected to acid etching and air-jet washed with water, dried with compressed air and received application of silane agent Monobond-S, followed by adhesive Excite ( Ivoclar Vivaden). Each ceramic block was bonded to the corresponding block of resin through the resin cement Multilink Automix. The specimens were cut to obtain nine micro samples for each set of ceramic-resin with 1 mm X 1 mm X 12 mm in length, which were submitted to microtensile test. The results were analyzed with descriptive statistics and analysis of variance with significance level of 5%, revealing that there were statistically significant (p = 0.000001 <0.05). From the Tukey test can be concluded that etching with hydrofluoric acid and 2.5% for 120 seconds gave the best bond strength, however, no statistical difference between the conditioning with the same acid in the concentration of 5.0% for 20 to 40 seconds

O vazio da união das culturas nipo-brasileira: projeto no bairro da Liberdade-SP

The work aims at an architectural project in the neighborhood of Liberdade in Sao Paulo, from analysis of the spread of Japanese culture in Brazil. Within this theme, the paper focuses on the Japanese urban space and the search for an identity of the Japanese, besides the problems that the neighborhood has. The architectural design is justified by the need for spaces of rest, meetings and green areas, where people can get away a bit of pace that the neighborhood has. The source of this research is based on bibliographic references, reviews of other projects, investigating the experience of urban space and the richest source of contributions that were the memories of living in Japan for eight months. The expected result is the visualization of the project through sketches, experiments and artistic designs for the chosen location

Análise sobre o comércio entre Brasil e União Européia e as barreiras não tarifárias que o afetam

É notável a importância da União Europeia para o setor exportador brasileiro, principalmente no caso da exportação de carne bovina. Conduto, este comércio bilateral encontra entraves para seu desenvolvimento causados principalmente pela União Europeia, tais como barreiras não tarifárias (barreiras técnicas, sanitárias, fitossanitárias etc) além de exigências acerca de produtos exportados para o mercado europeu por países terceiros, como, por exemplo, medidas de rastreabilidade, certificação, rotulagem e conformidade com regras europeias. Este estudo visa analisar este comércio bilateral, os obstáculos existentes e como o Brasil lida com esta situação

Rotulagem ambiental e sua incidência sobre as exportações brasileiras à União Européia

The study aims at analyzing the potential impacts of environmental labeling programs, emphasizing the European Community program on Brazilian exports to the EU. For this, we traced the historical growth of bilateral relations between the EU and Brazil, which shows a strategic partnership, and then it was listed trade barriers (tariff and nontariff) imposed by these two markets to the international trade relations. Later, the emergence of environmental seals was discussed, as well as their potential barriers to trade. Finally, selected products were analyzed in order to know the potential effects of environmental labeling on products exported by Brazil

Implicações da União Econômica e Monetária Europeia sobre a política econômica dos PIGS: uma análise sobre a crise das dívidas soberanas

The present work intends to analyze the impacts of the European Economic and Monetary Union in the economic policies of the countries named PIGS, with an analysis about the sovereign debt crisis, in view of the autonomy loss to adopt own monetary and exchange rate policies of countries with different levels of development

Resistência de união de cimentos resinosos em superfície de cerâmica de Y-TZP após aplicação de filme vitrocerâmico

Pós-graduação em Odontologia Restauradora - ICT

Efeito da limpeza pós-condicionamento e do tratamento térmico do silano na resistência de união de um cimento resinoso à cerâmica

Pós-graduação em Odontologia - FOA

Influência da superfície dentinária bovina na resistência de união de sistemas adesivos

Pós-graduação em Odontologia Restauradora - ICT

Efeito do tipo de adesivo e do seu mecanismo de ativação, assim como da viscosidade da resina composta, na resistência de união à dentina antes e após envelhecimento artificial

Pós-graduação em Odontologia Restauradora - ICT

Uma leitura vertiginosa: os fanzines punks no Brasil e o discurso da união e conscientização : (1981-1995)

Pós-graduação em História - FCLAS

Resistência de união e microinfiltração em restaurações de resina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de um gel de peróxido de carbamida a 10% sobre a resistência de união de restaurações adesivas à dentina

The present study aimed to analyze the effects of tooth bleaching with 10% carbamide peroxide (CP) gel on the bond strength of resin composite restorations to dentin. Material and Methods: Twenty cavities were prepared on the buccal surface of bovine teeth. After acid etching and application of bonding agent on dentin and enamel, the cavities were restored with composite resin. The specimens were divided into groups according to treatment on the surface of enamel / restoration: G1 - control (no treatment) and G2 (10% PC gel application for 8h/day during 14 days). After this period, the teeth were cut to produce beams with 0.81 mm2 cross-sectional area, which were subjected to microtensile test. The fractures were examined with a stereomicroscope and classified as cohesive in resin or dentin, adhesive, or mixed. Results: The statistical analysis (ANOVA / χ2) revealed that the factor treatment interfered with the bond strength, which was significantly higher for specimens of G2 (p <0.05). Adhesive fractures occurred in most of specimens of both groups with values ranging from 48.3% to 75%. Mixed fractures were the second more frequent in G1 and cohesive resin failure in G2. Conclusion: It was concluded that tooth bleaching with 10% of PC increased the bond strength of adhesive restorations to dentin.

Efeitos da aplicação de resina hidrofóbica sobre a resistência de união de adesivos autocondicionantes de frasco único

Introduction: It is known that self-etching adhesive systems can act as semi-permeable membranes. Objective: Evaluate the effects of additional layer of hydrophobic resin on the microtensile bond strength of self-etching one-bottle adhesives. Material and method: Sixty bovine incisors were used in this study. The facial enamel surfaces of the crowns were abraded with silicon carbide paper to expose flat, mid-coronal dentin surfaces. The following adhesives were used: Clearfil Tri S Bond (CTSB), AdheSE One (ADH) and One Coat  7.0 (OC). Each material was tested with and without applying an additional layer of hydrophobic material from the same manufacturer. Z-350 composite resin was inserted in three 1 mm increments. All adhesive restorative procedure was performed under simulated pulpal pressure and the microtensile test was performed immediately after curing the composite resin. Data were submitted to ANOVA and Tukey test (p < 0.05). Result: For all adhesives tested, the worst results were observed in groups which the additional layer of hydrophobic resin was not applied. Conclusion: The application of additional layer of hydrophobic material can improve the adhesion of self-etching all-in-one adhesive systems.

União: como ela é percebida através das expectativas e idealizações de homens e mulheres

In this work we intend to study how union is understood by men and women from their idealizations and expectations. We aim to survey how the contemporary society discourse about union is interpreted, absorbed and experienced by couples who are united for a certain time and those individuals who intend to establish a stable union, as well as whether there is a connection between the romantic view of peer relationships and the reality experienced by people. In other words, we aim to find out which influences the social changes bring to the conjugal relationship and what expectations they bring to it, to establish if the gender affects the relationship expectations, and analyze to which extent and how these expectations contribute to the development and maintenance of conjugal conflicts.