Mandibular growth and dentoalveolar development in the treatment of Class II, division 1, malocclusion using Balters Bionator according to the skeletal maturation

OBJECTIVE: The purpose of the study was to evaluate the influence of the skeletal maturation in the mandibular and dentoalveolar growth and development during the Class II, division 1, malocclusion correction with Balters bionator. METHODS: Three groups of children with Class II, division 1, malocclusion were evaluated. Two of them were treated for one year with the bionator of Balters appliance in different skeletal ages (Group 1: 6 children, 7 to 8 years old and Group 2: 10 children, 9 to 10 years old) and the other one was followed without treatment (Control Group: 7 children, 8 to 9 years old). Lateral 45 degree cephalometric radiographs were used for the evaluation of the mandibular growth and dentoalveolar development. Tantalum metallic implants were used as fixed and stable references for radiograph superimposition and data acquisition. Student's t test was used in the statistical analysis of the displacement of the points in the condyle, ramus, mandibular base and dental points. Analysis of variance one-fixed criteria was used to evaluate group differences (95% of level of significance). RESULTS: The intragroup evaluation showed that all groups present significant skeletal growth for all points analyzed (1.2 to 3.7 mm), but in an intergroup comparison, the increment of the mandibular growth in the condyle, ramus and mandibular base were not statically different. For the dentoalveolar modifications, the less mature children showed greater labial inclination of the lower incisors (1.86 mm) and the most mature children showed greater first permanent molar extrusion (4.8 mm).

Avanço máxilo-mandibular e reposicionamento simultâneo dos discos articulares: avaliação tridimensional

Pós-graduação em Ciências Odontológicas - FOAR

Avaliação do comportamento mecânico de três diferentes tipos de osteossíntese em fratura de côndilo mandibular: análise por elementos finitos 3D

Pós-graduação em Odontologia - FOAR

Preparação e incorporação do substrato em atta sexdens rubropilosa forel, 1908 (Hymenoptera: formicidae) e morfofuncionalidade mandibular em espécies de atta

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Sagittal Mandibular Osteotomy for Removal of Intraosseous Lesion

The ramus sagittal split osteotomy or mandibular body is an established technique for correction of dentofacial deformities but can have an accurate indication in cases requiring surgical access to remove lesions or more teeth included in the region of the mandibular angle. The main advantages of this technique are the possibility of preservation of the inferior alveolar nerve bundle and significant reduction in postoperative morbidity. In this article, the authors show a case in which the sagittal osteotomy of the mandible was used to gain access for removal of a lesion (complex odontoma).

Tomographic follow-up of bone regeneration after bone block harvesting from the mandibular ramus

Autogenous bone is still considered the gold standard, and the applicability of autogenous bone grafts is well established. However, the possibility of second harvesting from the same donor region remains unclear. The aim of this study was to perform a prospective evaluation of hard tissue deposition in the mandibular ramus after bone block harvesting using cone beam computed tomography (CBCT). Twenty-two patients with indications for augmentation procedures using autogenous bone from the mandibular ramus were selected. Three CBCT scans were performed with a tomographic guide before bone harvesting (T1) and at 14 days (T2) and 6 months (T3) after the surgical procedures. Measurements were obtained in 2D (area, mm(2)) and 3D (volume, mm(3)), and were subsequently compared. In the 2D analysis, the mean bone formation rate was 56%, while for the 3D analysis the mean rate was 9.7%. Despite this difference, there was a significant correlation between area and volume measurements. Our findings demonstrated the presence of hard tissue in the mandibular ramus at 6 months after bone harvesting, which suggests that it would be possible to reuse the same region for a second block harvesting. However, the second bone harvesting would involve less bone for transplantation when compared to the first bone harvesting.

Effect of platelet-rich plasma on bone healing of fresh frozen bone allograft in mandibular defects: a histomorphometric study in dogs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Unerupted Lower Third Molar Extractions and Their Risks for Mandibular Fracture

As every surgical procedure extraction of third molars can result in several complications, among them the mandibular angle fracture. Predisposing factors for fracture should be analyzed during and after the surgery. This paper aims to discuss the predisposing factors to the occurrence of mandibular angle fractures during and after the procedure for third molars extraction, as well as surgical principles to avoid this complication.

Using Conservative Condylectomy for Management of a Large Osteochondroma of the Mandibular Condyle With 6-Year Follow- up

Osteochondroma is a hamartomatous proliferation of cartilaginous tissue, which is the most common benign tumor of the long bones, but is relatively rare in the maxillofacial region. Most cases of mandibular condylar osteochondroma manifest with facial asymmetry or malocclusion with limited temporomandibular joint movements. Several approaches for management of this lesion have been proposed, as conservative condylectomy technique. This procedure has been suggested a valid approach to minimize facial asymmetry, contributing to the recovery of occlusion associated with no local tumor recurrence, and without condylar reconstruction procedure. Therefore, this article aims to describe a clinical report of a true osteochondroma of the mandibular condyle in a 35-year-old patient who was successfully treated using conservative condylectomy procedure.

The role of superstructure material on the stress distribution in mandibular full-arch implant-supported fixed dentures. A CT-based 3D-FEA

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exogenous bacterial osteomyelitis in 52 dogs: a retrospective study of etiology and in vitro antimicrobial susceptibility profile (2000-2013)

Background: Most clinical cases of osteomyelitis in dogs involve infectious agents, especially bacteria and fungi. The characterization of these microorganisms may aid in the prevention and treatment of disease.Objective: The aim of this study was to evaluate retrospectively microbiological cultures and in vitro antimicrobial susceptibility profile of isolates from 52 cases of bacterial osteomyelitis in long bones of dogs over 2000-2013. In 78% of the cases injuries were caused by a motor vehicle accident, but there were a few cases of dog bites (17%) and ascending infection due to pododermatitis (5%).Animals and methods: The isolated microorganisms were identified based on conventional phenotypic methods. In vitro disk diffusion test was performed using 30 different antimicrobials.Results: The isolates were obtained from femur (28%), humerus (16%), tibia (31%), and radius/ulna (25%). Among 52 cases, culture was positive in 88% of cases. Thirteen genus of different species of microorganisms were isolated. The most common microorganisms isolated were Staphylococcus spp. and Escherichia coli followed by Streptococcus spp., enteric bacteria, Corynebacterium sp. and anaerobic bacteria. In 42% of cases cultures were mixed. The most effective drugs against isolated bacteria were amoxicillin and clavulanate potassium (79%) followed by ceftriaxone (69%). High-resistance rates were documented against azithromycin (80%), penicillin (59%), and clindamycin (59%).Conclusions: The present study highlights diverse etiologic agents in cases of infectious bacterial osteomyelitis, with predominance of Staphylococcus genus, and reinforces the importance of obtaining cultures and susceptibility profiles given the high rates of antimicrobial resistance.

Biomechanical Study in Polyurethane Mandibles of Different Metal Plates and Internal Fixation Techniques, Employed in Mandibular Angle Fractures

The aim of this study was to perform a physicochemical and morphological characterization and compare the mechanical behavior of an experimental Ti-Mo alloy to the analogous metallic Ti-based fixation system, for mandibular angle fractures. Twenty-eight polyurethane mandibles were uniformly sectioned on the left angle. These were divided into 4 groups: group Eng 1P, one 2.0-mm plate and 4 screws 6 mm long; group Eng 2P, two 2.0-mm plates, the first fixed with 4 screws 6 mm long and the second with 4 screws 12 mm long. The same groups were created for the Ti-15Mo alloy. Each group was subjected to linear vertical loading at the first molar on the plated side in a mechanical testing unit. Means and standard deviations were compared with respect to statistical significance using ANOVA. The chemical composition of the Ti-15Mo alloy was close to the nominal value. The mapping of Mo and Ti showed a homogeneous distribution. SEM of the screw revealed machining debris. For the plates, only the cpTi plate undergoes a surface treatment. The metallographic analysis reveals granular microstructure, from the thermomechanical trials. A statistically significant difference was found (P < 0.05) when the comparison between both internal fixation techniques was performed. The 2P technique showed better mechanical behavior than 1P.

Effect of platelet-rich plasma on the healing of mandibular defects treated with fresh frozen bone allograft: a radiographic study in dogs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)