Kraft pulp from juvenile and mature woods of corymbia citriodora

Kraft pulp produced from juvenile and mature wood from thirty-two-year-old Corymbia citriodora trees was evaluated. The stem was subdivided into regions of juvenile and mature wood, and then it was transformed into chips. These materials were then cooked in the Laboratory of Pulp and Paper at São Paulo State University (UNESP, Botucatu, SP, Brazil) and the physico-mechanical properties of the pulps were determined. The results showed that: (1) the pulp yields of mature wood were up to 4.4% greater in comparison to the juvenile wood, (2) the juvenile wood pulp required a shorter refining time than mature wood to reach the same Schopper-Riegler degree, (3) the juvenile wood pulp presented lower specific volume, and (4) the mature wood pulp presented greater air resistance, tensile, tear and burst index values, stress-strain factor, and stretch than the juvenile wood pulp.

The Number of Bleaching Sessions Influences Pulp Tissue Damage in Rat Teeth

Introduction: Hydrogen peroxide tooth bleaching is claimed to cause alterations in dental tissue structures. This study investigated the influence of the number of bleaching sessions on pulp tissue in rats. Methods: Male Wistar rats were studied in 5 groups (groups 1S-5S) of 10 each, which differed by the number (1-5) of bleaching sessions. In each session, the animals were anesthetized, and 35% hydrogen peroxide gel was applied to 3 upper right molars. Two days after the experimental period, the animals were killed, and their jaws were processed for light microscope evaluation. Pulp tissue reactions were scored as follows: 1, no or few inflammatory cells and no reaction; 2, <25 cells and a mild reaction; 3, between 25 and 125 cells and a moderate reaction; and 4, 125 or more cells and a severe reaction. Results from each experimental group were compared between groups and within groups to the corresponding unbleached upper left molars and analyzed for significant differences using the Kruskal-Wallis test (P < .05). Results: All tissue sections showed significant bleaching-induced changes in the dental pulp. After 1 bleaching session, necrotic tissue in the pulp horns and underlying inflammatory changes were observed. The extent and intensity of these changes increased with the number of bleaching sessions. After 5 sessions, the changes included necrotic areas in the pulp tissue involving the second third of the radicular pulp and intense inflammation in the apical third. Conclusions: The number of bleaching sessions directly influenced the extent of pulp damage. © 2013 American Association of Endodontists.

Immediate and late analysis of dental pulp stem cells viability after indirect exposition to alternative in-office bleaching strategies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dose-Response and Time-Course of a-Tocoferol Mediating the Cytoprotection Of Dental Pulp Cells Against Hydrogen Peroxide

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Quality of wood and pulp from a clone of Eucalyptus grandis planted at three locations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Immunodetection of bone-related proteins in microcalcifications of human dental pulp

Objective: Root canal obliterations may pose esthetic and clinical problems or may even be a risk factor for tooth survival. Microcalcifications in the pulp can be so extensive that the entire root canal system becomes obliterated. Since bone sialoprotein (BSP) and osteopontin (OPN) are involved in both physiological and pathological mineralization processes, our hypothesis was that these two bone-related noncollagenous proteins are present in microcalcifications of the pulp. The purpose of this study was, therefore, to characterize the nature of microcalcifications in the pulp of aged human teeth. Methods: From a large collection of human teeth, 10 were found to exhibit pulpal microcalcifications. The teeth were extracted for periodontal reasons from 39-60 year old patients. After fixation in aldehydes and decalcification, teeth were processed for embedding in LR White resin for analysis in the light and transmission electron microscope. For the detection of BSP and OPN, post-embedding high resolution immunocytochemistry was applied. Results: The microcalcifications were round or elongated, occasionally coalescing, and intensely stained with toluidine blue. Collagen fibrils were found in most but not all microcalcifications. All microcalcifications were immunoreactive for both antibodies and showed an identical labeling pattern. Gold particle labeling was extensively found throughout the interfibrillar ground substance of the microcalcifications, whereas the dentin matrix lacked immunolabeling. Conclusion: BSP and OPN appear to be major matrix constituents of pulp microcalcifications and may thus, like in other mineralized tissues, be involved in their mineralization process.

Effects of anxiety on decision making and visual search behaviour in complex sport situations

Introduction Current empirical findings indicate that the efficiency of decision making (both for experts and near-experts) in simple situations is reduced under increased stress (Wilson, 2008). Explaining the phenomenon, the Attentional Control Theory (ACT, Eysenck et al., 2007) postulates an impairment of attentional processes resulting in a less efficient processing of visual information. From a practitioner’s perspective, it would be highly relevant to know whether this phenomenon can also be found in complex sport situations like in the game of football. Consequently, in the present study, decision making of football players was examined under regular vs. increased anxiety conditions. Methods 22 participants (11 experts and 11 near-experts) viewed 24 complex football situations (counterbalanced) in two anxiety conditions from the perspective of the last defender. They had to decide as fast and accurate as possible on the next action of the player in possession (options: shot on goal, dribble or pass to a designated team member) for equal numbers of trials in a near and far distance condition (based on the position of the player in possession). Anxiety was manipulated via a competitive environment, false feedback as well as ego threats. Decision time and accuracy, gaze behaviour (e.g., fixation duration on different locations) as well as state anxiety and mental effort were used as dependent variables and analysed with 2 (expertise) x 2 (distance) x 2 (anxiety) ANOVAs with repeated measures on the last two factors. Besides expertise differences, it was hypothesised that, based on ACT, increased anxiety reduces performance efficiency and impairs gaze behaviour. Results and Discussion Anxiety was manipulated successfully, indicated by higher ratings of state anxiety, F(1, 20) = 13.13, p < .01, ηp2 = .40. Besides expertise differences in decision making – experts responded faster, F(1, 20) = 11.32, p < .01, ηp2 = .36, and more accurate, F(1,20) = 23.93, p < .01, ηp2 = .55, than near-experts – decision time, F(1, 20) = 9.29, p < .01, ηp2 = .32, and mental effort, F(1, 20) = 7.33, p = .01, ηp2 = .27, increased for both groups in the high anxiety condition. This result confirms the ACT assumption that processing efficiency is reduced when being anxious. Replicating earlier findings, a significant expertise by distance interaction could be observed, F(1, 18) = 18.53, p < .01, ηp2 = .51), with experts fixating longer on the player in possession or the ball in the near distance and longer on other opponents, teammates and free space in the far distance condition. This shows that experts are able to adjust their gaze behaviour to affordances of displayed playing patterns. Additionally, a three way interaction was found, F(1, 18) = 7.37 p = .01, ηp2 = .29, revealing that experts utilised a reduced number of fixations in the far distance condition when being anxious indicating a reduced ability to pick up visual information. Since especially the visual search behaviour of experts was impaired, the ACT prediction that particularly top-down processes are affected by anxiety could be confirmed. Taken together, the results show that sports performance is negatively influenced by anxiety since longer response times, higher mental effort and inefficient visual search behaviour were observed. From a practitioner’s perspective, this finding might suggest preferring (implicit) perceptual cognitive training; however, this recommendation needs to be empirically supported in intervention studies. References: Eysenck, M. W., Derakshan, N., Santos, R., & Calvo, M. G. (2007). Anxiety and cognitive performance: Attentional control theory. Emotion, 7, 336-353. Wilson, M. (2008). From processing efficiency to attentional control: A mechanistic account of the anxiety-performance relationship. Int. Review of Sport and Exercise Psychology, 1, 184-201.

The autonomy of the EU legal order and the law-making activities of international organizations. Some examples regarding the Council most recent practice. Research Papers in Law 03/2012

[Introduction.] It is generally believed that while the principle of the autonomy of the EU legal order, in the sense of constitutional and institutional autonomy that is to say what concerns the autonomous decision-making of the EU, has been clearly strengthened by the most recent jurisprudence of the Court of Justice (eg. Moxplant3, Intertanko or the Kadi/Al Baraakat judgements or the Opinion 1/2009 of the CJEU etc.) as well as, in my opinion, in many aspects by the Treaty of Lisbon, it is still valid to add that the principle of a favourable approach, stemming from the Court jurisprudence, for the enhanced openness of the EU legal order to international law has remained equally important for the EU4. On the other hand, it should be also seen that in a globalized world, and following the increased role of the EU as an international actor, its indispensable and crucial role concerning the creation of world (legal) order in many policy fields ( for example let's think about the G20 issues, the global economic and financial crisis, the role of the EU in promoting and protecting human rights worldwide, the implementation of the multilateral or regional conventional law, developed in the framework the UN (e.g. in the field of agriculture or environment etc) or what concerns the Kyoto process on climate change or the conservation of marine biological resources at international level etc), it seems reasonable and justified to submit that the influence, for example, of the law-making activities of the main stakeholder international organizations in the mentioned policy-areas on the EU (especially on the development of its constantly evolving legal order) or vice-versa the influence of the EU law-making practice on these international organizations is significant, in many aspects mutually interdependent and more and more remarkable. This tendency of the 21st century doesn't mean, however, in my view, that the notion of the autonomy of the EU legal order would have been weakened by this increasing interaction between international law and EU law over the passed years. This contribution is going to demonstrate and prove these departuring points by giving some concrete examples from the most recent practice of the Council (all occuring either in the second half of 2009 or after the entry into force of the Lisbon Treaty), and which relate to two very important policy areas in the EU, namely the protection of human rights and the Common Fishery Policy.

Designing a safety management support system using open architecture databases: the requirements of information representation in the support of managers' risk-related decision-making

This research was conducted at the Space Research and Technology Centre o the European Space Agency at Noordvijk in the Netherlands. ESA is an international organisation that brings together a range of scientists, engineers and managers from 14 European member states. The motivation for the work was to enable decision-makers, in a culturally and technologically diverse organisation, to share information for the purpose of making decisions that are well informed about the risk-related aspects of the situations they seek to address. The research examined the use of decision support system DSS) technology to facilitate decision-making of this type. This involved identifying the technology available and its application to risk management. Decision-making is a complex activity that does not lend itself to exact measurement or precise understanding at a detailed level. In view of this, a prototype DSS was developed through which to understand the practical issues to be accommodated and to evaluate alternative approaches to supporting decision-making of this type. The problem of measuring the effect upon the quality of decisions has been approached through expert evaluation of the software developed. The practical orientation of this work was informed by a review of the relevant literature in decision-making, risk management, decision support and information technology. Communication and information technology unite the major the,es of this work. This allows correlation of the interests of the research with European public policy. The principles of communication were also considered in the topic of information visualisation - this emerging technology exploits flexible modes of human computer interaction (HCI) to improve the cognition of complex data. Risk management is itself an area characterised by complexity and risk visualisation is advocated for application in this field of endeavour. The thesis provides recommendations for future work in the fields of decision=making, DSS technology and risk management.

The two opposing impacts of heritage making on local communities : residents’ perceptions: a Portuguese case

This article examines the impact associated with the making of heritage and tourism at a destination. Special attention is paid to the residents’ perceptions of the impact. The examination is focused on the rural village of Sortelha, in Portugal, where, in recent decades, a state-led programme was implemented in order to renovate the historic buildings and built fabric and to generate benefits for the local community. Based on ethnographic materials collected in 2003, 2009 and 2013, the study demonstrates that the making of heritage may give rise to two opposing impacts simultaneously – increased social cohesion and place pride, on the one hand, and envy and competition (and, hence, social atomisation), on the other hand – and that residents are entirely cognisant of the tension between the two. The study has the potential to contribute to both the theoretical and the applied literature on heritage making.

Influence of cervical preflaring on determinationof apical file size in mandibular molars: SEM analysis

This study investigated the influence of cervical preflaring with different rotary instruments on determination of the initial apical file (IAF) in mesiobuccal roots of mandibular molars. Fifty human mandibular molars whose mesial roots presented two clearly separated apical foramens (mesiobuccal and mesiolingual) were used. After standard access opening and removal of pulp tissue, the working length (WL) was determined at 1 mm short of the root apex. Five groups (n=10) were formed at random, according to the type of instrument used for cervical preflaring. In group 1, the size of the IAF was determined without preflaring of the cervical and middle root canal thirds. In groups 2 to 5, preflaring was performed with Gates-Glidden drills, ProTaper instruments, EndoFlare instruments and LA Axxes burs, respectively. Canals were sized manually with K-files, starting with size 08 K-files, inserted passively up to the WL. File sizes were increased until a binding sensation was felt at the WL and the size of the file was recorded. The instrument corresponding to the IAF was fixed into the canal at the WL with methylcyanoacrylate. The teeth were then sectioned transversally 1 mm short of the apex, with the IAF in position. Cross-sections of the WL region were examined under scanning electron microscopy and the discrepancies between canal diameter and the diameter of IAF were calculated using the tool "rule" (FEG) of the microscope's proprietary software. The measurements (µm) were analyzed statistically by Kruskal-Wallis and Dunn's tests at 5% significance level. There were statistically significant differences among the groups (p<0.05). The non-flared group had the greatest discrepancy (125.30 ± 51.54) and differed significantly from all flared groups (p<0.05). Cervical preflaring with LA Axxess burs produced the least discrepancies (55.10 ± 48.31), followed by EndoFlare instruments (68.20 ± 42.44), Gattes Glidden drills (68.90 ± 42.46) and ProTaper files (77.40 ± 73.19). However, no significant differences (p>0.05) were found among the rotary instruments. In conclusion, cervical preflaring improved IAF fitting to the canals at the WL in mesiobuccal roots of maxillary first molars. The rotary instruments evaluated in this study did not differ from each other regarding the discrepancies produced between the IAF size and canal diameter at the WL.

Estimation of hexenuronic acids and kappa number in kraft pulps of Eucalyptus globulus by Fourier transform near infrared spectroscopy and multivariate analysis

Fourier transform near infrared (FT-NIR) spectroscopy was evaluated as an analytical too[ for monitoring residual Lignin, kappa number and hexenuronic acids (HexA) content in kraft pulps of Eucalyptus globulus. Sets of pulp samples were prepared under different cooking conditions to obtain a wide range of compound concentrations that were characterised by conventional wet chemistry analytical methods. The sample group was also analysed using FT-NIR spectroscopy in order to establish prediction models for the pulp characteristics. Several models were applied to correlate chemical composition in samples with the NIR spectral data by means of PCR or PLS algorithms. Calibration curves were built by using all the spectral data or selected regions. Best calibration models for the quantification of lignin, kappa and HexA were proposed presenting R-2 values of 0.99. Calibration models were used to predict pulp titers of 20 external samples in a validation set. The lignin concentration and kappa number in the range of 1.4-18% and 8-62, respectively, were predicted fairly accurately (standard error of prediction, SEP 1.1% for lignin and 2.9 for kappa). The HexA concentration (range of 5-71 mmol kg(-1) pulp) was more difficult to predict and the SEP was 7.0 mmol kg(-1) pulp in a model of HexA quantified by an ultraviolet (UV) technique and 6.1 mmol kg(-1) pulp in a model of HexA quantified by anion-exchange chromatography (AEC). Even in wet chemical procedures used for HexA determination, there is no good agreement between methods as demonstrated by the UV and AEC methods described in the present work. NIR spectroscopy did provide a rapid estimate of HexA content in kraft pulps prepared in routine cooking experiments.

Hybrid Reinforcement of Sisal and Polypropylene Fibers in Cement-Based Composites

Several studies using vegetable fibers as the exclusive reinforcement in fiber-cement composites have shown acceptable mechanical performance at the first ages. However, after the exposure to accelerated aging tests, these composites have shown significant reduction in the toughness or increase in embrittlement. This was mainly attributed to the improved fiber-matrix adhesion and fiber mineralization after aging process. The objective of the present research was to evaluate composites produced by the slurry dewatering technique followed by pressing and air curing, reinforced with combinations of polypropylene fibers and sisal kraft pulp at different pulp freeness. The physical properties, mechanical performance, and microstructural characteristics of the composites were evaluated before and after accelerated and natural aging. Results showed the great contribution of pulp refinement on the improvement of the mechanical strength in the composites. Higher intensities of refinement resulted in higher modulus of rupture for the composites with hybrid reinforcement after accelerated and natural aging. The more compact microstructure was due to the improved packing of the mineral particles with refined sisal pulp. The toughness of the composites after aging was maintained in relation to the composites at 28 days of cure.

The use of calcium hydroxide, antibiotics and biocides as antimicrobial medicaments in endodontics

Bacteria have been implicated in the pathogenesis and progression of pulp and periapical diseases. The primary aim of endodontic treatment is to remove as many bacteria as possible from the root canal system and then to create an environment in which any remaining organisms cannot survive. This can only be achieved through the use of a combination of aseptic treatment techniques, chemomechanical preparation of the root canal, antimicrobial irrigating solutions and intracanal medicaments. The choice of which intracanal medicament to use is dependent on having an accurate diagnosis of the condition being treated, as well as a thorough knowledge of the type of organisms likely to be involved and. their mechanisms of growth and survival. Since the disease is likely to have been caused by the presence of bacteria within the root canal, the use of an antimicrobial agent is essential. Many medicaments have been used in an attempt to achieve the above aims, but no single preparation has been found to be completely predictable or effective. Commonly used medicaments include calcium hydroxide, antibiotics; non-phenolic biocides, phenolic biocides and iodine compounds. Each has advantages and disadvantages, and further research is required to determine which is best suited for root canal infections.

Molecular cloning and characterization of a ripening-induced polygalacturonase related to papaya fruit softening

Pulp softening is one of the most remarkable changes during ripening of papaya (Carica papaya) fruit and it is a major cause for post-harvest losses. Although cell wall catabolism has a major influence on papaya fruit, quality information on the gene products involved in this process is limited. A full-length polygalacturonase cDNA (cpPG) was isolated from papaya pulp and used to study gene expression and enzyme activity during normal and ethylene-induced ripening and after exposure of the fruit to 1-MCP. Northern-blot analysis demonstrated that cpPG transcription was strongly induced during ripening and was highly ethylene-dependent. The accumulation of cpPG transcript was paralleled by enzyme activity, and inversely correlated to the pulp firmness. Preliminary in silica analysis of the cpPG genomic sequence revealed the occurrence of putative regulatory motifs in the promoter region that may help to explain the effects of plant hormones and non-abiotic stresses on papaya fruit firmness. This newly isolated cpPG is an important candidate for functional characterization and manipulation to control the process of pulp softening during papaya ripening. (C) 2009 Elsevier Masson SAS. All rights reserved.