HVAC system size – getting it right

There is evidence that many heating, ventilating & air conditioning (HVAC) systems, installed in larger buildings, have more capacity than is ever required to keep the occupants comfortable. This paper explores the reasons why this can occur, by examining a typical brief/design/documentation process. Over-sized HVAC systems cost more to install and operate and may not be able to control thermal comfort as well as a “right-sized” system. These impacts are evaluated, where data exists. Finally, some suggestions are developed to minimise both the extent of, and the negative impacts of, HVAC system over-sizing, for example: • Challenge “rules of thumb” and/or brief requirements which may be out of date. • Conduct an accurate load estimate, using AIRAH design data, specific to project location, and then resist the temptation to apply “safety factors • Use a load estimation program that accounts for thermal storage and diversification of peak loads for each zone and air handling system. • Select chiller sizes and staged or variable speed pumps and fans to ensure good part load performance. • Allow for unknown future tenancies by designing flexibility into the system, not by over-sizing. For example, generous sizing of distribution pipework and ductwork will allow available capacity to be redistributed. • Provide an auxiliary tenant condenser water loop to handle high load areas. • Consider using an Integrated Design Process, build an integrated load and energy use simulation model and test different operational scenarios • Use comprehensive Life Cycle Cost analysis for selection of the most optimal design solutions. This paper is an interim report on the findings of CRC-CI project 2002-051-B, Right-Sizing HVAC Systems, which is due for completion in January 2006.

The passionate critic

It's hard to be dispassionate about Reyner Banham. For me, and for the plethora of other people with strong opinions about Banham, his writing is compelling, and one’s connection to him as a figure quite personal. For me, frankly, he rocks. As a landscape architect, I gleaned most of my knowledge about Modern architecture from Banham. His Theory and Design in the First Machine Age, along with Rowe and Koetter’s Collage City and Venturi’s Complexity and Contradiction in Architecture were the most influential books in my library, by far. Later, as a budding “real scholar”, I was disappointed to find that, while these authors had serious credibility, the writings themselves were regarded as “polemical” – when in fact what I admired about them most was their ability and willingness to make rough groupings and gross generalizations, and to offer fickle opinions. It spoke to me of a real personal engagement and an active, participatory reading of the architectural culture they discussed. They were at their best in their witty, cutting, but generally pithy, creative prose, such as in Rowe’s extrapolation of the modern citizen as the latest “noble savage”, or Banham railing against conservative social advocates and their response to high density housing: “those who had just re-discovered ‘community’ in the slums would fear megastructure as much as any other kind of large-scale renewal program, and would see to it that the people were never ready.” Any reader of Banham will be able to find a gem that will relate, somehow, personally, to what they are doing right now. For Banham, it was all personal, and the gaps in his scholarship, rather, were the dispassionate places: “Such bias is essential – an unbiased historian is a pointless historian – because history is an essentially critical activity, a constant re-scrutiny and rearrangement of the profession.” Reyner Banham: Historian of the Immediate Future, Nigel Whiteley’s recent “intellectual biography” (the MIT Press, 2002), allowed me to revisit Banham’s passionate mode of criticism and to consider what his legacy might be. The book examines Banham’s body of work, grouped according to his various primary fascinations, as well as his relationship to contemporaneous theoretical movements, such as postmodernism. His mode of practice, as a kind of creative critic, is also considered in some depth. While there are points where the book delves into Banham’s personal life, on the whole Whiteley is very rigorous in considering and theorizing the work itself: more than 750 articles and twelve books. In academic terms, this is good practice. However, considering the entirely personal nature of Banham’s writing itself, this separation seems artificial. Banham, as he himself noted, “didn’t mind a gossip”, and often when reading the book I was curious about what was happening to him at the time. Banham’s was an amazing type of intellectual practice, and one that academics (a term he hated) could do well to learn from. While Whiteley spends a lot of time arguing for his practice to be regarded as such, and makes strong points about both the role of the critic, and the importance of journalism, rather than scholarly publishing, I found myself wondering what his study looked like. What books he had in his library. Did he smoke when he wrote? What sort of teaching load did he have? He is an inspiration to design writers and thinkers, and I, personally, wanted to know how he did it.

Decision support system architecture for consultant selection

Decision Support System (DSS) has played a significant role in construction project management. This has been proven that a lot of DSS systems have been implemented throughout the whole construction project life cycle. However, most research only concentrated in model development and left few fundamental aspects in Information System development. As a result, the output of researches are complicated to be adopted by lay person particularly those whom come from a non-technical background. Hence, a DSS should hide the abstraction and complexity of DSS models by providing a more useful system which incorporated user oriented system. To demonstrate a desirable architecture of DSS particularly in public sector planning, we aim to propose a generic DSS framework for consultant selection. It will focus on the engagement of engineering consultant for irrigation and drainage infrastructure. The DSS framework comprise from operational decision to strategic decision level. The expected result of the research will provide a robust framework of DSS for consultant selection. In addition, the paper also discussed other issues that related to the existing DSS framework by integrating enabling technologies from computing. This paper is based on the preliminary case study conducted via literature review and archival documents at Department of Irrigation and Drainage (DID) Malaysia. The paper will directly affect to the enhancement of consultant pre-qualification assessment and selection tools. By the introduction of DSS in this area, the selection process will be more efficient in time, intuitively aided qualitative judgment, and transparent decision through aggregation of decision among stakeholders.

Infrastructure project planning decision making : challenges for decision support system applications

Most infrastructure projects share the same characteristics in term of management aspects and shortcomings. Human factor is believed to be the major drawbacks due to the nature of unstructured problems which can further contribute to management conflicts. This growing complexity in infrastructure projects has shift the paradigm of policy makers to adopt Information Communication Technology (ICT) as a driving force. For this reason, it is vital to fully maximise and utilise the recent technologies to accelerate management process particularly in planning phase. Therefore, a lot of tools have been developed to assist decision making in construction project management. The variety of uncertainties and alternatives in decision making can be entertained by using useful tool such as Decision Support System (DSS). However, the recent trend shows that most DSS in this area only concentrated in model development and left few fundamentals of computing. Thus, most of them were found complicated and less efficient to support decision making within project team members. Due to the current incapability of many software aspects, it is desirable for DSS to provide more simplicity, better collaborative platform, efficient data manipulation and reflection to user needs. By considering these factors, the paper illustrates four challenges for future DSS development i.e. requirement engineering, communication framework, data management and interoperability, and software usability

Bullish creative industries and the bear market

The creative industries idea is better than even its original perpetrators might have imagined, judging from the original mapping documents. By throwing the heavy duty copyright industries into the same basket as public service broadcasting, the arts and a lot of not-for-profit activity (public goods) and commercial but non-copyright-based sectors (architecture, design, increasingly software), it really messed with the minds of economic and cultural traditionalists. And, perhaps unwittingly, it prepared the way for understanding the dynamics of contemporary cultural ‘prosumption’ or ‘playbour’ in an increasingly networked social and economic space.

Assessment and curriculum reform in China : the college English test and tertiary English as a foreign language education.

Educational assessment was a worldwide commonplace practice in the last century. With the theoretical underpinnings of education shifting from behaviourism and social efficiency to constructivism and cognitive theories in the past two decades, the assessment theories and practices show a widespread changing movement. The emergent assessment paradigm, with a futurist perspective, indicates a deviation away from the prevailing large scale high-stakes standardised testing and an inclination towards classroom-based formative assessment. Innovations and reforms initiated in attempts to achieve better education outcomes for a sustainable future via more developed learning and assessment theories have included the 2007 College English Reform Program (CERP) in Chinese higher education context. This paper focuses on the College English Test (CET) - the national English as a Foreign Language (EFL) testing system for non-English majors at tertiary level in China. It seeks to explore the roles that the CET played in the past two College English curriculum reforms, and the new role that testing and assessment assumed in the newly launched reform. The paper holds that the CET was operationalised to uplift the standards. However, the extended use of this standardised testing system brings constraints as well as negative washback effects on the tertiary EFL education. Therefore in the newly launched reform -CERP, a new assessment model which combines summative and formative assessment approaches is proposed. The testing and assessment, assumed a new role - to engender desirable education outcomes. The question asked is: will the mixed approach to formative and summative assessment provide the intended cure to the agony that tertiary EFL education in China has long been suffering - spending much time, yet achieving little effects? The paper reports the progresses and challenges as informed by the available research literature, yet asserts a lot needs to be explored on the potential of the assessment mix in this examination tradition deep-rooted and examination-obsessed society.

A comparative study : regulatory requirements on subdivisions for increasing passive cooling

A major project in the Sustainable Built Assets core area is the Sustainable Sub-divisions – Ventilation Project that is the second stage of a planned series of research projects focusing on sustainable sub-divisions. The initial project, Sustainable Sub-divisions: Energy focused on energy efficiency and examined the link between dwelling energy efficiency and sub-divisional layout. In addition, the potential for on site electricity generation, especially in medium and high-density developments, was also examined. That project recommended that an existing lot-rating methodology be adapted for use in SEQ through the inclusion of sub divisional appropriate ventilation data. Acquiring that data is the object of this project. The Sustainable Sub-divisions; Ventilation Project will produce a series of reports. The first report (Report 2002-077-B-01) summarised the results from an industry workshop and interviews that were conducted to ascertain the current attitudes and methodologies used in contemporary sub-division design in South East Queensland. The second report (Report 2002-077-B-02) described how the project is being delivered as outlined in the Project Agreement. It included the selection of the case study dwellings and monitoring equipment and data management process. This third report (Report 2002-077-B-03) provides an analysis and review of the approaches recommended by leading experts, government bodies and professional organizations throughout Australia that aim to increase the potential for passive cooling and heating at the subdivision stage. This data will inform issues discussed on the development of the enhanced lot-rating methodology in other reports of this series. The final report, due in June 2007, will detail the analysis of data for winter 2006 and summer 2007, leading to the development and delivery of the enhanced lot-rating methodology.

Breastfeeding experiences of Japanese women living in Perth, Australia

The aim of this study was to document the breastfeeding practices of Japanese-Australian mothers living in Perth. A cross-sectional survey of mothers who had delivered babies in Japan or Australia or both was carried out on a sample of 163 mothers recruited through Japanese social and cultural groups in Perth and by a 'snowball' technique. Factors involved in the decision to breastfeed were analysed using multivariate regression analysis. The main outcome measures were the initiation and duration of breastfeeding and cultural beliefs about breastfeeding. Breastfeeding initiation rates of the Japanese- Australian mothers in Japan and in Australia were higher than for other Australians and are consistent with breastfeeding rates in Japan. In Australia, 65% of Japanese-Australian mothers were still breastfeeding at six months. The most common reason for the decision to cease breastfeeding was 'insufficient breastmilk'. The significant factors in breastfeeding duration were 'the time the infant was introduced to infant formula', 'the time when the feeding decision was made', 'doctors support breastfeeding' and 'the mother received enough help from hospital staff'; these were positively associated with the duration of breastfeeding. Japanese mothers take a lot of notice of advice given by health professionals about infant feeding practices.

AITPM Email Newsletter Volume 0905, May 2009: Presidents Message

President’s Message Hello fellow AITPM members, We’ve been offered a lot of press lately about the Federal Government’s plan for the multibillion dollar rollout of its high speed broadband network, which at the moment is being rated to a speed of 100Mb/s. This seems fantastic in comparison to the not atypical 250 to 500kb/s that I receive on my metropolitan cable broadband, which incidentally my service provider rates at theoretical speeds of up to 8 Mb/s. I have no doubt that such a scheme will generate significant advantages to business and consumers. However, I also have some reservations. Only a few of years ago I marvelled at my first 256Mb USB stick, which cost my employer about $90. Last month I purchased a 16Gb stick with a free computer carry bag for $80, which on the back of my envelope has given me about 72 times the value of my first USB stick not including the carry bag! I am pretty sure the technology industry will find a way to eventually push a lot more than 100Mb/s down the optic fibre network just as they have done with pushing several Mb/s ADSL2 down antique copper wire. This makes me wonder about the general problem of inbuilt obsolescence of all things high-tech due to rapid advances in the tech industry. As a transport professional I then think to myself that our industry has been moving forward at somewhat of a slower pace. We certainly have had major milestones having significant impacts, such as the move from horse and cart to the self propelled motor vehicle, sealing and formal geometric design of roads, development of motorways, signalisation of intersections, coordination of networks, to simulation modelling for real time adaptive control (perhaps major change has been at a frequency of 30 years or so?). But now with ITS truly penetrating the transport market, largely thanks to the in-car GPS navigator, smart phone, e-toll and e-ticket, I believe that to avoid our own obsolescence we’re going to need to “plan for ITS” rather than just what we seem to have been doing up until now, that is, to get it out there. And we’ll likely need to do it at a faster pace. It will involve understanding how to data mine enormous data sets, better understanding the human/machine interface, keeping pace with automotive technology more closely, resolving the ethical and privacy chestnuts, and in the main actually planning for ITS to make peoples’ lives easier rather than harder. And in amongst this we’ll need to keep pace with the types of technology advances similar to my USB stick example above. All the while we’ll be making a brand new set of friends in the disciplines that will morph into ITS along with us. Hopefully these will all be “good” problems for our profession to have. I should close in reminding everyone again that AITPM’s flagship event, the 2009 AITPM National Conference, Traffic Beyond Tomorrow, is being held in Adelaide from 5 to 7 August. www.aitpm.com has all of the details about how to register, sponsor a booth, session, etc. Best regards all, Jon Bunker

AITPM Email Newsletter Volume 0910, October 2009 : Presidents Message

President’s Message Hello fellow AITPM members, Well I can’t believe it’s already October! My office is already organising its end of year function and looking to plan for 2010. Our whole School is moving to a different building next year, with the lovely L block eventually making way for a new shiny one. Those of you who have entered the Brisbane CBD from the south side, across the Captain Cook Bridge, would know L block as the big 9 storey brick and concrete Lego block ode to 1970’s functional architecture, which greets you on the right hand side. Onto traffic matters: an issue that has been tossing around in my mind of late is that of speed. I know I am growing older and may be prematurely becoming a “grumpy old man”, but everyone around me locally seems to be accelerating off from the stop line much faster than I was taught to for economical driving, both here and in the United States (yes they made my wife and me resit our written and practical driving tests when we lived there). People here in Australia also seem to be driving right on top of the posted speed limit, on whichever part of the Road Hierarchy, whether urban or rural. I was also taught on both sides of the planet that the posted speed limit is a maximum legal speed, not the recommended driving speed. This message did seem to sink in to the American drivers around me when we lived in Oregon - where people did appear to drive more cautiously. Further, posted speed limits in Oregon were, and I presume still are, set more conservative by about 5mph or 10km/h than Australian limits, for any given part of the Road Hierarchy. Another excellent speed limit treatment used in Oregon was in school zones, where reduced speed limits applied “when children are present” rather than during prescribed hours on school days. This would be especially useful here in Australia, where a lot of extra-curricular activities take place around schools outside of the prescribed speed limit hours. Before and after hours school care is on the increase (with parents dropping and collecting children near dawn and dusk in the winter), and many childcentred land uses are located adjacent to schools, such as Scouts/Guides halls, swimming pools and parks. Consequentially, I believe there needs to be some consideration towards more public campaigning about economical driving and the real purpose of the speed limit = or perhaps even a rethink of the speed limit concept, if people really are driving on top of it and it’s not just me becoming grumpier (our industrial psychology friends at the research centres may be able to assist us here). The Queensland organising committee is now in full swing organising the 2010 AITPM National Conference, What’s New?, so please keep a lookout for related content. Best regards to all, Jon Bunker PS A Cartoonists view of traffic engineers I thought you might enjoy this. http://xkcd.com/277/

Collaborative Filtering Recommender Systems based on Popular Tags

The social tags in web 2.0 are becoming another important information source to profile users' interests and preferences for making personalized recommendations. However, the uncontrolled vocabulary causes a lot of problems to profile users accurately, such as ambiguity, synonyms, misspelling, low information sharing etc. To solve these problems, this paper proposes to use popular tags to represent the actual topics of tags, the content of items, and also the topic interests of users. A novel user profiling approach is proposed in this paper that first identifies popular tags, then represents users’ original tags using the popular tags, finally generates users’ topic interests based on the popular tags. A collaborative filtering based recommender system has been developed that builds the user profile using the proposed approach. The user profile generated using the proposed approach can represent user interests more accurately and the information sharing among users in the profile is also increased. Consequently the neighborhood of a user, which plays a crucial role in collaborative filtering based recommenders, can be much more accurately determined. The experimental results based on real world data obtained from Amazon.com show that the proposed approach outperforms other approaches.

CT imaging of an Egyptian mummy

Over the last few years various research groups around the world have employed X-ray Computed Tomography (CT) imaging in the study of mummies – Toronto-Boston (1,2), Manchester(3). Prior to the development of CT scanners, plane X-rays were used in the investigation of mummies. Xeroradiography has also been employed(4). In a xeroradiograph, objects of similar X-ray density (very difficult to see on a conventional X-ray) appear edge-enhanced and so are seen much more clearly. CT scanners became available in the early 1970s. A CT scanner produces cross-sectional X-rays of objects. On a conventional X-radiograph individual structures are often very difficult to see because all the structures lying in the path of the X-ray beam are superimposed, a problem that does not occur with CT. Another advantage of CT is that the information in a series of consecutive images may be combined to produce a three-dimensional reconstruction of an object. Slices of different thickness and magnification may be chosen. Why CT a mummy? Prior to the availability of CT scanners, the only way of finding out about the inside of a mummy in any detail was to unwrap and dissect it. This has been done by various research groups – most notably the Manchester, UK and Pennsylvania University, USA mummy projects(5,6). Unwrapping a mummy and carrying out an autopsy is obviously very destructive. CT studies hold the possibility of producing a lot more information than is possible from plain X-rays and are able to show the undisturbed arrangement of the wrapped body. CT is also able to provide information about the internal structure of bones, organ packs, etc that wouldn’t be possible without sawing through the bones etc. The mummy we have scanned is encased in a coffin which would have to have been broken open in order to remove the body.

Shareholder values, not shareholder value : the role of 'ethical funds' and 'ethical entrepreneurs' in connecting shareholders' values with their investments

This article rebuts the still-common assumption that managers of capitalist entities have a duty, principally or even exclusively, to maximise the monetary return to investors on their investments. It argues that this view is based on a misleadingly simplistic conception of human values and motivation. Not only is acting solely to maximise long-term shareholder value difficult, it displays, at best, banal single-mindedness and, at worst, sociopathy. In fact, real investors and managers have rich constellations of values that should be taken account of in all their decisions, including their business decisions. Awareness of our values, and public expression of our commitment to exemplify them, make for healthier investment and, in the long term, a healthier corporate world. Individuals and funds investing on the basis of such values, in companies that express their own, display humanity rather than pathology. Preamble I always enjoyed the discussions that Michael Whincop and I had about the interaction of ethics and economics. Each of us could see an important role for these disciplines, as well as our common discipline of law. We also shared an appreciation of the institutional context within which much of the drama of life is played out. In understanding the behaviour of individuals and the choices they make, it seemed axiomatic to each of us that ethics and economics have a lot to say. This was also true of the institutions in which they operate. Michael ·had a strong interest in 'the new institutional economics' I and I had a strong interest in 'institutionalising ethics' right through the 1990s.' This formed the basis of some fascinating and fruitful discussions. Professor Charles Sampford is Director, Key Centre for Ethics, Law, Justice and Governance, Foundation Professor of Law at Griffith University and President, International Institute for Public Ethics.DrVirginia Berry is a Research Fellow at theKey Centre for Ethics, Law,Justice andGovernance, Griffith University. Oliver Williamson, one of the leading proponents of the 'new institutional economics', published a number of influential works - see Williamson (1975, 1995,1996). Sampford (1991),' pp 185-222. The primary focus of discussions on institutionalising ethics has been in public sectorethics: see, for example, Preston and Sampford (2002); Sampford (1994), pp 114-38. Some discussion has, however, moved beyond the public sector to include business - see Sampford 200408299

Reading fictions

Each of the six chapters, which offer a cumulative course of study, begins with a concise overview of the concepts to be explored through the students’ reading of selected stories. The first chapter, 'Texts and readings', tries to make reading seem 'strange' through a series of de-familiarising activities that ask students to consider not only what particular stories might mean, but also how they are made to mean in different, and often quite contradictory, ways. This is explored further in the second chapter which introduces the idea of 'reading positions' and investigates the idea that in some senses, stories are always 'already read'. The next two chapters, called 'Intertextuality' and 'Re-readings?', invite students to consider how they produce particular readings and how they might choose among quite different readings or interpretations of the same story. The fifth chapter explores ideas about texts and their relationship to 'reality' through readings of racism, while the final chapter, 'Real people?' asks students to consider how they produce often rich and detailed readings of characters from minimal textual information. Terms and concepts which may be new to some students are highlighted in the text and indexed for easy reference. The short stories in this collection are by writers from different parts of the world and will appeal to students. They range from 'expressive realist' texts to less conventional narrative forms. Those teachers who have enjoyed using Reading Stories with their students will have a lot to look forward to in this collection of surefire 'winners' - by writers as varied as Bessie Head, Kristin Hunter, Tim Winton, Joyce Carol Oates, John Wain and Patricia Grace - each of which is accompanied by imaginative, enjoyable and thought-provoking activities.

Teaching the economic way of thinking : a new approach to teaching introductory economics in a business degree

In teaching introductory economics there has been a tendency to put a lot of emphasis on imparting abstract models and technical skills to students (Stilwell, 2005; Voss, Blais, Greens, & Ahwesh, 1986). This model building approach has the merit of preparing the grounding for students 10 pursue further studies in economics. However, in a business degree with only a small proportion of students majoring in economics, such an approach tend to alienate the majority of students transiting from high school in to university. Surveys in Europe and Australia found that students complained about the lack of relevance of economics courses to the real world and the over-reliance of abstract mathematical modelling (Kirman, 2001; Lewis and Norris, 1997; Siegfried & Round, 2000). BSB112 Economics 1 is one of the eight faculty core units in the Faculty of Business at QUT, with over 1000 students in each semester. In semester I 2008, a new approach to teaching this unit was designed aiming to achieve three inter-related objectives: (1) to provide business students with a first insight into economic thinking and language, (2) to integrate economic analysis with current Australian social, environmental and political issues, and (3) to cater for students with a wide range of academic needs. Strategies used to achieve these objectives included writing up a new text which departs from traditional economics textbooks in important ways, integrating students' cultures in teaching and learning activities, and devising a new assessment format to encourage development of research skills and applications rather than reproduction of factual knowledge. This paper will document the strategies used in this teaching innovation, present quantitative and qualitative evidence to evaluate this new approach and suggest ways of further improvement.