Effect of carbohydrate overfeeding on whole body macronutrient metabolism and expression of lipogenic enzymes in adipose tissue of lean and overweight humans

OBJECTIVE: Lipids stored in adipose tissue can originate from dietary lipids or from de novo lipogenesis (DNL) from carbohydrates. Whether DNL is abnormal in adipose tissue of overweight individuals remains unknown. The present study was undertaken to assess the effect of carbohydrate overfeeding on glucose-induced whole body DNL and adipose tissue lipogenic gene expression in lean and overweight humans. DESIGN: Prospective, cross-over study. SUBJECTS AND METHODS: A total of 11 lean (five male, six female, mean BMI 21.0+/-0.5 kg/m(2)) and eight overweight (four males, four females, mean BMI 30.1+/-0.6 kg/m(2)) volunteers were studied on two occasions. On one occasion, they received an isoenergetic diet containing 50% carbohydrate for 4 days prior to testing; on the other, they received a hyperenergetic diet (175% energy requirements) containing 71% carbohydrates. After each period of 4 days of controlled diet, they were studied over 6 h after having received 3.25 g glucose/kg fat free mass. Whole body glucose oxidation and net DNL were monitored by means of indirect calorimetry. An adipose tissue biopsy was obtained at the end of this 6-h period and the levels of SREBP-1c, acetyl CoA carboxylase, and fatty acid synthase mRNA were measured by real-time PCR. RESULTS: After isocaloric feeding, whole body net DNL amounted to 35+/-9 mg/kg fat free mass/5 h in lean subjects and to 49+/-3 mg/kg fat free mass/5 h in overweight subjects over the 5 h following glucose ingestion. These figures increased (P<0.001) to 156+/-21 mg/kg fat free mass/5 h in lean and 64+/-11 mg/kg fat free mass/5 h (P<0.05 vs lean) in overweight subjects after carbohydrate overfeeding. Whole body DNL after overfeeding was lower (P<0.001) and glycogen synthesis was higher (P<0.001) in overweight than in normal subjects. Adipose tissue SREBP-1c mRNA increased by 25% in overweight and by 43% in lean subjects (P<0.05) after carbohydrate overfeeding, whereas fatty acid synthase mRNA increased by 66 and 84% (P<0.05). CONCLUSION: Whole body net DNL is not increased during carbohydrate overfeeding in overweight individuals. Stimulation of adipose lipogenic enzymes is also not higher in overweight subjects. Carbohydrate overfeeding does not stimulate whole body net DNL nor expression of lipogenic enzymes in adipose tissue to a larger extent in overweight than lean subjects.

Estimation of lean meat content in pig carcasses using X-ray Computed Tomography and PLS regression

Lean meat percentage (LMP) is an important carcass quality parameter. The aim of this work is to obtain a calibration equation for the Computed Tomography (CT) scans with the Partial Least Square Regression (PLS) technique in order to predict the LMP of the carcass and the different cuts and to study and compare two different methodologies of the selection of the variables (Variable Importance for Projection — VIP- and Stepwise) to be included in the prediction equation. The error of prediction with cross-validation (RMSEPCV) of the LMP obtained with PLS and selection based on VIP value was 0.82% and for stepwise selection it was 0.83%. The prediction of the LMP scanning only the ham had a RMSEPCV of 0.97% and if the ham and the loin were scanned the RMSEPCV was 0.90%. Results indicate that for CT data both VIP and stepwise selection are good methods. Moreover the scanning of only the ham allowed us to obtain a good prediction of the LMP of the whole carcass.

The antecedents and innovation consequences of organizational search: empirical evidence for Spain

This paper examines the antecedents and innovation consequences of the methods firms adopt in organizing their search strategies. From a theoretical perspective, organizational search is described using a typology that shows how firms implement exploration and exploitation search activities that span their organizational boundaries. This typology includes three models of implementation: ambidextrous, specialized, and diversified implementation. From an empirical perspective, the paper examines the performance consequences when applying these models, and compares their capacity to produce complementarities. Additionally, since firms' choices in matters of organizational search are viewed as endogenous variables, the paper examines the drivers affecting them and identifies the importance of firms' absorptive capacity and diversified technological opportunities in determining these choices. The empirical design of the paper draws on new data for manufacturing firms in Spain, surveyed between 2003 and 2006.

Comparison of different devices for predicting the lean meat percentage of pig carcasses

Lean meat percentage (LMP) is the criterion for carcass classification and it must be measured on line objectively. The aim of this work was to compare the error of the prediction (RMSEP) of the LMP measured with the following different devices: Fat-O-Meat’er (FOM), UltraFOM (UFOM), AUTOFOM and -VCS2000. For this reason the same 99 carcasses were measured using all 4 apparatus and dissected according to the European Reference Method. Moreover a subsample of the carcasses (n=77) were fully scanned with a X-ray Computed Tomography equipment (CT). The RMSEP calculated with cross validation leave-one-out was lower for FOM and AUTOFOM (1.8% and 1.9%, respectively) and higher for UFOM and VCS2000 (2.3% for both devices). The error obtained with CT was the lowest (0.96%) in accordance with previous results, but CT cannot be used on line. It can be concluded that FOM and AUTOFOM presented better accuracy than UFOM and VCS2000.

Innovation sources and productivity in Catalonian firms: a quantile regression analysis

This paper explores the effects of two main sources of innovation - intramural and external R&D— on the productivity level in a sample of 3,267 Catalonian firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and knowledge-intensive services. JEL codes: O300, C100, O140 Keywords: Innovation sources, R&D, Productivity, Quantile Regression

Chronic exercise preserves lean muscle mass in masters athletes.

Aging is commonly associated with a loss of muscle mass and strength, resulting in falls, functional decline, and the subjective feeling of weakness. Exercise modulates the morbidities of muscle aging. Most studies, however, have examined muscle-loss changes in sedentary aging adults. This leaves the question of whether the changes that are commonly associated with muscle aging reflect the true physiology of muscle aging or whether they reflect disuse atrophy. This study evaluated whether high levels of chronic exercise prevents the loss of lean muscle mass and strength experienced in sedentary aging adults. A cross-section of 40 high-level recreational athletes ("masters athletes") who were aged 40 to 81 years and trained 4 to 5 times per week underwent tests of health/activity, body composition, quadriceps peak torque (PT), and magnetic resonance imaging of bilateral quadriceps. Mid-thigh muscle area, quadriceps area (QA), subcutaneous adipose tissue, and intramuscular adipose tissue were quantified in magnetic resonance imaging using medical image processing, analysis, and visualization software. One-way analysis of variance was used to examine age group differences. Relationships were evaluated using Spearman correlations. Mid-thigh muscle area (P = 0.31) and lean mass (P = 0.15) did not increase with age and were significantly related to retention of mid-thigh muscle area (P < 0.0001). This occurred despite an increase in total body fat percentage (P = 0.003) with age. Mid-thigh muscle area (P = 0.12), QA (P = 0.17), and quadriceps PT did not decline with age. Specific strength (strength per QA) did not decline significantly with age (P = 0.06). As muscle area increased, PT increased significantly (P = 0.008). There was not a significant relationship between intramuscular adipose tissue (P = 0.71) or lean mass (P = 0.4) and PT. This study contradicts the common observation that muscle mass and strength decline as a function of aging alone. Instead, these declines may signal the effect of chronic disuse rather than muscle aging. Evaluation of masters athletes removes disuse as a confounding variable in the study of lower-extremity function and loss of lean muscle mass. This maintenance of muscle mass and strength may decrease or eliminate the falls, functional decline, and loss of independence that are commonly seen in aging adults.

Public policy for entrepreneurship and innovation: impact in managed and entrepreneurial economies

Many of the most advanced economies of the world have undergone significant transformation in the last few decades. Globalization and technological changes, especially developments in information technologies, have helped to stimulate this transformation. These have contributed to changing institutional frameworks in many respects within the economies including adjustments to economic policies. The results of these transformations take many different forms and are manifested in different areas of an economy. At the heart of these changes however, has been the increasingly important role of entrepreneurship in the economy. The transformed ("new") economy stimulates and supports activities in innovation and entrepreneurship and is labelled the entrepreneurial economy. The "old" economy on the other hand restricts such activities and is referred to as the managed economy (Audretsch & Thurik, 2001).

Analysing the innovation process in the EU Integrated Programme, ISAFRUIT

ISAFRUIT is an integrated European Union Project focussed on increasing fruit consumption as a means to improve human health, through evaluating the fruit chain and addressing bottlenecks therein.The innovations which are being developed throughout the ISAFRUIT Project have been analysed to determine both the success factors and the obstacles in reaching the commercialisation stage. Only 9.58% of the deliverables planned within the Project were focussed on developing technological innovations.There is evidence, however, of successes in the development of new innovations arising from the ISAFRUIT Project, with several other potential innovations in the pipeline. Of the technologies identified, 67% are still at the “invention stage”; that is, the stage prior to bridging the so-called “valley of death”, the stage between an invention and an innovation. Those which are considered to have moved over the “valley of death” either had industry partners included in the Project, or had consulted with industry to ensure that the technology was relevant, or met a recognised industry need. Many of the technologies which made less progress did not have the same interactions with industry. A number of other issues were identified which prevented further progress towards innovation. The need for scientists to publish scientific papers, both for their career pathways and to increase their chances of future funding, was identified as one issue, although the filing of patents is now becoming more accepted and recognised. The patenting system is considered complex by many scientists and is not well-understood. Finally, agreements between partners on the sharing of intellectual property rights can cause a delay in the innovation process.

Technological innovation in creative clusters. The case of laser in conservation of artworks in Florence

The field of laser application to the restoration and cleaning of cultural assets is amongst the most thriving developments of recent times. Ablative laser technological systems are able to clean and protect inestimable works of art subject to atmospheric agents and degradation over time. This new technology, which has been developing for the last forty year, is now available to restorers and has received a significant success all over Europe. An important contribution in the process of laser innovation has been carried out in Florence by local actors belonging to a creative cluster. The objects of the analysis are the genesis of this innovation in this local Florentine context, and the relationships among the main actors who have contributed in it. The study investigates how culture can play a part in the generation of ideas and innovations, and which are the creative environments that can favour it. In this context, the issue of laser technologies for the restoration of cultural heritage has been analysed as a case study in the various paths taken by the Creative Capacity of the Culture (CCC).

Industrial district effects and innovation in the Tuscan shipbuilding industry

The aim of the present work is to investigate innovative processes within a geographical cluster, and thus contribute to the debate on the effects of industrial clusters on innovation capacity. In particular, we would like to ascertain whether the advantages of industrial districts in promoting innovation, as already revealed by literature (diffusion of knowledge, social capital and trust, efficient networking), are also keys to success in the Tuscan shipbuilding industry of pleasure and sporting boats. First, we verify the existence of clusters of shipbuilding in Tuscany, using a specific methodology. Next, in the identified clusters, we analyse three innovative networks financed in a policy to support innovation, and examine whether the typical features of a cluster for promoting innovation are at work, using a questionnaire administered to 71 actors. Finally, we develop a performance analysis of the cluster firms and ascertain whether their different behaviours also lead to different performances. The analysis results show that our case records effects of industrial clustering on innovation capacity, such as the important role given to trust and social capital, the significant worth put in interfirm relations and in each partner’s specific competencies, or even the distinctive performance of firms belonging to a cluster.

Trade, firm selection, and innovation: the competition channel

The availability of rich firm-level data sets has recently led researchers to uncover new evidence on the effects of trade liberalization. First, trade openness forces the least productive firms to exit the market. Secondly, it induces surviving firms to increase their innovation efforts and thirdly, it increases the degree of product market competition. In this paper we propose a model aimed at providing a coherent interpretation of these findings. We introducing firm heterogeneity into an innovation-driven growth model, where incumbent firms operating in oligopolistic industries perform cost-reducing innovations. In this framework, trade liberalization leads to higher product market competition, lower markups and higher quantity produced. These changes in markups and quantities, in turn, promote innovation and productivity growth through a direct competition effect, based on the increase in the size of the market, and a selection effect, produced by the reallocation of resources towards more productive firms. Calibrated to match US aggregate and firm-level statistics, the model predicts that a 10 percent reduction in variable trade costs reduces markups by 1:15 percent, firm surviving probabilities by 1 percent, and induces an increase in productivity growth of about 13 percent. More than 90 percent of the trade-induced growth increase can be attributed to the selection effect.

Product differentiation, competitive pressure and the effects of innovation on the success and survivability of firms in oligopoly markets

In a recent paper Tishler and Milstein (2009) fi…nd that increased competition may increase aggregate R&D spending while market output decreases. Therefore, they obtain the surprising result that R&D spending is excessive when competition becomes intense. Their result is based on the standard linear demand function for differentiated products introduced by Bowley (1924) where decreased product differentiation is interpreted as more competitive pressure. In this paper I show that at an aggregate level this interpretation is problematic because equilibrium effects are dominated by a demand reduction effect. A slight modifi…cation of the standard demand function eliminates this effect. For the Tishler and Milstein (2009) setting it is shown that then increased competition increases both R&D spending and aggregate market output. Therefore, at least for consumers, more intense competition increases welfare. Journal of Economic Literature Classi…fication Numbers: D43, L1, O3. Keywords: Oligopoly markets, Product differentiation, Competitive pressure.

Patent policy, patent pools, and the accumulation of claims in sequential innovation

We present a dynamic model where the accumulation of patents generates an increasing number of claims on sequential innovation. We compare innovation activity under three regimes -patents, no-patents, and patent pools- and find that none of them can reach the first best. We find that the first best can be reached through a decentralized tax-subsidy mechanism, by which innovators receive a subsidy when they innovate, and are taxed with subsequent innovations. This finding implies that optimal transfers work in the exact opposite way as traditional patents. Finally, we consider patents of finite duration and determine the optimal patent length.