Contrasting high-resolution characteristic shock-capturing methods in aeroacoustic test problems

Two shock-capturing methods are considered. One is based on a standard conservative Roe scheme with van Leer's MUSCL variable extrapolation method applied to characteristic variables and a Runge-Kutta time stepping scheme. The other is based on the novel CABARET space-time scheme, which uses two sets of staggered variables, one for the conservation step and the other for characteristic splitting into local Riemann invariants. The methods are compared in a range of 2-D inviscid compressible flow test cases. Copyright © 2008 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

Modelling the long-term sustainability of indigenous hunting in Manu National Park, Peru: landscape-scale management implications for Amazonia

P> Widespread hunting throughout Amazonia threatens the persistence of large primates and other vertebrates. Most studies have used models of limited validity and restricted spatial and temporal scales to assess the sustainability. We use human-demographi

Analysis of the characteristic sequence of intein and revision of its motifs

Since the first intein (Sce VMA) was found in Saccharomydes cerevisiae ATPases gene in 1990, more and more inteins were identified. It is necessary to analyze the new inteins to understand the sequence charateristics of inteins. By searching protein and n

The study of biological characteristic and population dynamic of Caspian vimba (Vimba vimba persa), in coastal waters of Caspian Sea (Mazandaran Province)

This study was conducted to determine reproduction characteristics, diet regime, age structure and population dynamics parameters of the vimba vimba persa (Pallas, 1811) in Mazandaran waters of the Caspian Sea, from October 2008 to September 2009. A total of 994 specimens were monthly collected by beach seine and cast net from six fish landings of Ramsar, Tonekabon, Chaloos, Mahmood Abad, Sari and Behshahr. Biometric characters were measured for each specimen at the laboratory. Scales were used for age determination. Sex determination and fecundity were determined. Population dynamic parameters as well as stock assessment including cohort analysis were estimated using FISAT software. The finding showed that the mean of fork length and body weight of the Caspian Vimba were 168.4±2.6 mm and 71.94±32.24 g respectively. Strong correlation was found between these two variables (a= 0.012; b = 3.047; r2 = 0.955). 92 specimens were studied from the fecundity point of view. This species was found to have more abundance in spring (esp. Apr-May). The samples composed of 397(42.6%) male, 537(57.4%) female; Overall sex ratio (M: F =1: 1.35) was significantly different from the expected 1:1 ratio (p ≤0.05). The advanced stages of maturity (4th & 5th) were found in April and May. The highest Gonadosomatic Index in female was in May and the lowest one was in July. This fish is therefore a spring spawner. The maximum absolute and relative fecundities were 34640 and 260.9, respectively; the minimum absolute and relative fecundities were 5400 and 94.5 respectively. The averages of absolute and relative fecundities were 17198±7710 and 171.85±48.8, respectively. Coefficient vacuity index was 59.2% which indicates that this fish is mesophagous. Among of living creature consumes by Caspian Vimba mollusks, 76 arthropods, worms, plants, detritus and fishes were found 32.9% , 26.7% , 13.4% , 17% , 4.4% and 1.6% respectively. The infinite fork lengths were 261 mm for females, 25mm for males and 261 mm for both sexes respectively. For population growth and mortality parameters; K ( 0.28 per year for both sexes, 0.3 per year for males, 0.33 per year for females); t0 ( -0.65 year for both sexes, -0.23 year in females, -0.51 year in males ); Φ' ( 2.28 ); Z ( 0.98 per year ); M ( 0.59 per year); F ( 0.39 per year) and Exploitation coefficient was 0.4. The analysis showed that total biomass and MSY were 1336 and 528.8 tonnes respectively.

Identification, characteristic and phylogenetic analysis of type II DNA topoisomerase gene in Giardia lamblia

The genes encoding type II DNA topoisomerases were investigated in Giardia lamblia genome, and a type IIA gene, GlTop 2 was identified. It is a single copy gene with a 4476 by long ORF without intron. The deduced amino acid sequence shows strong homology to eukaryotic DNA Top 2. However, some distortions were found, such as six insertions in the ATPase domain and the central domain, a similar to 100 as longer central domain; a similar to 200 as shorter C-terminal domain containing rich charged residues. These features revealed by comparing with Top 2 of the host, human, might be helpful in exploiting drug selectivity for antigiardial therapy. Phylogenetic analysis of eukaryotic enzymes showed that kinetoplastids, plants, fungi, and animals were monophyletic groups, and the animal and fungi lineages shared a more recent common ancestor than either did with the plant lineage; microsporidia grouped with fungi. However, unlike many previous phylogenetic analyses, the "amitochondriate" G. lamblia was not the earliest branch but diverged after mitochondriate kinetoplastids in our trees. Both the finding of typical eukaryotic type IIA topoisomerase and the phylogenetic analysis suggest G. lamblia is not possibly as primitive as was regarded before and might diverge after the acquisition of mitochondria. This is consistent with the recent discovery of mitochondrial remnant organelles in G. lamblia.

Phylogenetic relationships among Trichodinidae (Ciliophora : Peritricha) derived from the characteristic values of denticles

The phylogenetic relationships among trichodinids remain obscure. As an important diagnostic marker, the morphology of the denticles in the adhesive disc as well as the adoral spiral has been widely used in generic discrimination and species identification of trichodinids. We studied the characters of denticles of the ten genera of Trichodinidae and the sole genus Urceolaria of Urceolariidae by using a quantitative method. The characteristic values were used to generate Manhattan distance, on which the dendrogram was based to construct with the Unweighted Paired Group Method using the Arithmetic mean (UPGMA). The investigations show that all the genera of the family Trichodinidae were clearly separate from the outgroup Urceolaria, and within the Trichodinidae: (i) Dipartiella grouped with Trichodinella and Tripartiella and lay in the closest position to the outgroup with a low dissimilarity, suggesting Dipartiella might be the most primitive genus in the family; (ii) Hemitrichodina clustered in a single clad and lay in the farthest position to the outgroup with the highest dissimilarity, indicating that it might be the most advanced genus; and (iii) the other 6 genera, Trichodina, Paratrichodina, Semitrichodina, Vauchomia, Pallitrichodina and Trichodoxa clustered in a big clad with very low dissimilarity, showing that they are closely related to each other. We discuss the evolutionary trend of the denticle and conclude that the denticles of the adhesive disc should be an apomorphic feature of the trichodinids and their changes could reflect the evolutionary tendencies of these ciliates.

Characteristic analysis of the optical delay in frequency response of resonant cavity enhanced (RCE) photodetectors

With consideration of the modulation frequency of the input lightwave itself, we present a new model to calculate the quantum efficiency of RCE p-i-n photodetectors (PD) by superimposition of multiple reflected lightwaves. For the first time, the optical delay, another important factor limiting the electrical bandwidth of RCE p-i-n PD excluding the transit time of the carriers and RCd response of the photodetector, is analyzed and discussed in detail. The optical delay dominates the bandwidth of RCE p-i-n PD when its active layer is thinner than several 10 nm. These three limiting factors must be considered exactly for design of ultra-high-speed RCE p-i-n PD.

Characteristic study of maximum modal gain of p-doped 1.3 mu m InAs/GaAs quantum dot lasers

We report an experimental and theoretical study of maximum modal gain of p-doped 1.3 mu m InAs/GaAs quantum dot (QD) lasers. The maximum modal gain of the QD laser with five stacks of QDs is as high as 17.5 cm(-1) which is the same as that of the undoped laser with identical structures. The expression of the maximum modal gain is derived and it is indicated that p-doping has no effect to the maximum modal gain. We theoretically calculated the maximum modal gain of the QD lasers and the result is in a good agreement with the experimental data. Furthermore, QDs with lower height or smaller aspect ratio are beneficial to achieving a greater maximum modal gain that leads to lower threshold current density and higher differential modal gain, which is good for the application of p-doped 1.3 mu m InAs/GaAs QD lasers in optical communications systems.

Temperature dependent spectral response characteristic of III-V compound tandem cell

The GaInP/GaAs/Ge triple-junction tandem cells with a conversion efficiency of 27.1% were fabricated using metalorganic chemical vapor deposition (MOCVD) technique. Temperature dependence of the spectral response measurements of the GaInP/GaAs/Ge tandem cell was performed by a quantum efficiency system at temperatures ranging from 25A degrees C to 160A degrees C. The red-shift phenomena of the absorption limit for all subcells were observed with increasing temperature, which is dued to the energy gap narrowing with temperature. The short-circuit current densities (J (sc)) of GaInP, GaAs and Ge subcells at room temperature calculated based on the spectral response data were 12.9, 13.7 and 17 mA/cm(2), respectively. The temperature coefficient of J (sc) for the tandem cell was determined to be 8.9 mu A/(cm(2) center dot A degrees C), and the corresponding temperature coefficient of the open-circuit voltage deduced from the series-connected model was -6.27 mV/A degrees C.

Characteristic of rapid thermal annealing on GaIn(N)(Sb)As/GaAs quantum well grown by molecular-beam epitaxy

Effect of rapid thermal annealing on photoluminescence (PL) properties of InGaAs, InGaNAs, InGaAsSb, and InGaNAsSb quantum wells (QWs) grown by molecular-beam epitaxy was systematically investigated. Variations of PL intensity and full width at half maximum were recorded from the samples annealed at different conditions. The PL peak intensities of InGaAs and InGaNAs QWs initially increase and then decrease when the annealing temperature increased from 600 to 900 degrees C, but the drawing lines of InGaAsSb and InGaNAsSb take on an "M" shape. The enhancement of the PL intensity and the decrease of the full width at half maximum in our samples are likely due to the removal of defects and dislocations as well as the composition's homogenization. In the 800-900 degrees C high-temperature region, interdiffusion is likely the main factor influencing the PL intensity. In-N is easily formed during annealing which will prevent In out diffusion, so the largest blueshift was observed in InGaAsSb in the high-temperature region. (c) 2006 American Institute of Physics.