Persistent organic pollutants, d13C and d15N in zooplankton, fish and bird species in Kongsfjorden according to season

Seasonality in biomagnification of persistent organic pollutants (POPs; polychlorinated biphenyls, chlorinated pesticides, and brominated flame retardants) in Arctic marine pelagic food webs was investigated in Kongsfjorden, Svalbard, Norway. Trophic magnification factors (TMFs; average factor change in concentration between two trophic levels) were used to measure food web biomagnification in biota in May, July, and October 2007. Pelagic zooplankton (seven species), fish (five species), and seabirds (two species) were included in the study. For most POP compounds, highest TMFs were found in July and lowest were in May. Seasonally changing TMFs were a result of seasonally changing POP concentrations and the d15N-derived trophic positions of the species included in the food web. These seasonal differences in TMFs were independent of inclusion/exclusion of organisms based on physiology (i.e., warm- versus cold-blooded organisms) in the food web. The higher TMFs in July, when the food web consisted of a higher degree of boreal species, suggest that future warming of the Arctic and increased invasion by boreal species can result in increased food web magnification. Knowledge of the seasonal variation in POP biomagnification is a prerequisite for understanding changes in POP biomagnification caused by climate change.

Heavy metal concentrations in fauna from hydrothermal fields of the Mid-Atlantic Ridge

Distributions of Fe, Mn, Zn, Cu, Ni, Co, Cr, Pb, As, Ag, Cd, Se, Sb, and Hg in 128 samples of tissues of organisms that inhabit hydrothermal vent fields of the Mid-Atlantic Ridge (Menez Gwen, Snake Pit, and Rainbow) depending on the abiotic environmental parameters were studied. The majority of the elements studied showed direct correlations between their concentrations in fluids released and in tissues of hydrothermal organisms. A higher degree of bioaccumulation of metals was revealed in Bathymodiolus mussels and Rimicaris shrimps from the Rainbow hydrothermal vent field as compared to their analogues from the Menez Gwen and Snake Pit fields. This corresponds to maximal concentrations of the majority of the metals studied in the Rainbow high-temperature hydrothermal fluids. The highest degree of bioaccumulation of heavy metals was found in gills of symbiotrophic mussels Bathymodiolus and in maxillipeds of ectosymbiotic shrimps Rimicaris, i.e., in organs that function in dependence on chemosynthetic bacteria. Within the Rainbow vent field, the shrimps, which inhabit in biotopes with more high-temperature conditions and therefore are more strongly subjected to influence of fluids, were found to contain higher metal contents than mollusks. Fe-Mn hydroxide films that cover mussel shells might serve as important reservoirs of other metals related to Fe and Mn.

On Labor Complementarity, Cultural Frictions and Strategic Immigration Policies

In this paper we consider a model with two industrialized countries that face a flow of immigration from the "rest of the world." The countries differ in three characteristics: the labor complementarity between the "native" population and immigrants, the population size, and the magnitude of the cultural friction between the natives and immigrants. We consider a non-cooperative game between two countries' when their strategic instrument is the choice of an immigration quota and the world immigrant wages introduce the spill-over effect between two countries. We first show that the quota game admits unique pure strategies Nash equilibrium. We then compare the equilibrium choices of two countries and show that even though the larger country attracts more immigrants, it chooses lower quota than its smaller counterpart. It also turns out that higher degree of labor complementarity between natives and immigrants and a lower degree of cultural friction between two groups yield higher immigration quota. We also examine the welfare implications of countries choices' and argue that coordinated and harmonized immigration policies may improve the welfare of both countries.

Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites

Modeling and prediction of the overall elastic–plastic response and local damage mechanisms in heterogeneous materials, in particular particle reinforced composites, is a very complex problem. Microstructural complexities such as the inhomogeneous spatial distribution of particles, irregular morphology of the particles, and anisotropy in particle orientation after secondary processing, such as extrusion, significantly affect deformation behavior. We have studied the effect of particle/matrix interface debonding in SiC particle reinforced Al alloy matrix composites with (a) actual microstructure consisting of angular SiC particles and (b) idealized ellipsoidal SiC particles. Tensile deformation in SiC particle reinforced Al matrix composites was modeled using actual microstructures reconstructed from serial sectioning approach. Interfacial debonding was modeled using user-defined cohesive zone elements. Modeling with the actual microstructure (versus idealized ellipsoids) has a significant influence on: (a) localized stresses and strains in particle and matrix, and (b) far-field strain at which localized debonding takes place. The angular particles exhibited higher degree of load transfer and are more sensitive to interfacial debonding. Larger decreases in stress are observed in the angular particles, because of the flat surfaces, normal to the loading axis, which bear load. Furthermore, simplification of particle morphology may lead to erroneous results.

Electrohydrodynamic behavior in twisted-wedge nematic structures

A new type of domain for nematic liquid crystals with a twisted-wedge structure is presented. This new type of domain appears from the low frequency range to 10 kHz. This behavior was observed for square and pulsed excitations. The liquid crystal was N-(p-methoxybenzylidene)-p'-butylaniline) (MBBA) used at room temperature. These domains offer a higher degree of complexity than conventional Williams domains. The corresponding stability chart is presented.

Quality attributes of pistachio nuts as affected by rootstocks and deficit irrigation

BACKGROUND: In this work, the influence of two regulated deficit irrigation (RDI) treatments and three different rootstocks on the quality of pistachios was evaluated by analyzing different parameters: morphological analysis, physicochemical analysis and sensory analysis. RESULTS: The results obtained in terms of the choice of rootstock revealed that Pistacia atlantica had increased production yields, nut weight, mineral content, higher intensities of characteristic sensory attributes and a higher degree of consumer satisfaction, than the other rootstocks studied. Moreover, the results established that the application of RDI on pistachio cultivation had no significant influence on production yield, weight, size, colour, water activity or mineral composition. Furthermore, T1 treatment (stem water potential?higher intensities of characteristic sensory attributes and a greater level of satisfaction among international consumers. CONCLUSION: These results confirm that the application of deficit irrigation (T1) contributes to an increase in overall product quality. Furthermore, Pistacia atlantica rootstock provided better yield and quality than the other rootstocks studied. © 2014 Society of Chemical Industry

Barreras para la práctica de actividad física y deportiva en las personas adultas de la Comunidad de Madrid. Desarrollo y validación de un instrumento

El propósito de este estudio fue la construcción y validación de un instrumento de medición de barreras a la práctica de la actividad física y deportiva por parte de las personas adultas desde la teoría ecológico social y analizar la presencia de las diferentes barreras así como las innovaciones y alternativas de conciliación a las barreras relacionadas con el empleo, el cuidado de hijos e hijas y las tareas del hogar, identificando las posibles diferencias existentes en función del género y del tipo de demanda en la población adulta de la Comunidad de Madrid. Se ha realizado un estudio cuantitativo, descriptivo y transversal en una muestra representativa de la población residente en la Comunidad de Madrid entre 30 y 64 años. El tipo de muestreo fue probabilístico, de tipo polietápico según tamaño demográfico de municipio y género, con un margen de error del ± 5,27% y un intervalo de confianza del 95,5%. El tamaño de la muestra final fue de 360 personas (50,3% mujeres, 49,7% hombres), quienes completaron un cuestionario estructurado mediante entrevista personal cara a cara en su domicilio entre octubre y diciembre de 2011, que incluía una escala de barreras específica, así como sub-cuestionarios de innovaciones y alternativas de conciliación vinculados a los tres ítems relacionados con el empleo, cuidado de hijos e hijas y hogar de la escala de barreras. La escala de barreras fue completada por las personas practicantes de actividad física y deportiva que deseaban realizar otra actividad, es decir, por la Demanda Establecida, así como por las personas no practicantes pero deseosas de hacerlo o Demanda Latente, y las personas no practicantes no interesadas en practicar o Demanda Ausente (n=246). Las personas que alcanzaron elevadas puntuaciones en los tres ítems de la escala de barreras vinculados al empleo, cuidado de hijos e hijas y hogar, completaron sub-cuestionarios específicos de innovaciones y alternativas de conciliación vinculados a estas barreras. Para el estudio métrico de los ítems y la dimesionalidad de la escala de barreras se llevaron a cabo análisis descriptivos de los ítems, análisis correlacionales y análisis factoriales exploratorios (AFE). Como resultado se obtuvo una escala de barreras constituida por 13 ítems que explicaron el 59,1% de la variabilidad total de los datos, agrupados en cuatro dimensiones denominadas: Barreras Interpersonales (2 ítems), Barreras Individuales (4 ítems), Barreras Comunidad-Institucionales (4 ítems) y Barreras Obligaciones-Tiempo (3 ítems). Los datos de la escala de barreras y los sub-cuestionarios de innovaciones y alternativas de conciliación fueron analizados con el SPSS v. 18. Para la comparación de variables cuantitativas y ordinales se utilizaron ANOVAS de dos factores (género por tipo de demanda), el tamaño del efecto para esta prueba se cuantificó mediante eta cuadrado. Los resultados se expresaron como porcentajes para las variables nominales y como medias y desviaciones típicas para las variables ordinales y cuantitativas. El nivel de riesgo se fijó en 0,05. El instrumento presentó una fiabilidad aceptable (α=0,58) en consonancia con el modelo ecológico social presentando dimensiones que explicaron los niveles de influencia de las diferentes esferas. Los resultados obtenidos permitieron avalar tanto la adecuación de las propiedades psicométricas de los ítems, así como la validez y fiabilidad de la escala de barreras para la práctica de actividad física y deportiva. Los distintos análisis realizados han aportado evidencia de la validez de una estructura de cuatro dimensiones acorde a los planteamientos teóricos previos de los modelos ecológicos sociales. En la dimensión barreras Individuales se identificaron diferencias según el tipo de demanda (F2,237=40,28; p<0,001; η2=0,25) y el género (F1,237=8,72; p<0,01; η2=0,84). En la dimensión barreras Interpersonales se identificaron diferencias de género (F1,239 =14,9; p<0,01; η2=0,06) pero no entre demandas (F2,239=2,35; p>0,05; 1-β=0,47). En la dimensión Barreras Obligaciones-Tiempo se identificaron diferencias en función del tipo de demanda (F2,239=3,88; p<0,05; η2=0,03) sin presentar diferencias entre hombres y mujeres (F1,239=1,06; p>0,05; 1-β=0,18). Por último, en la dimensión Comunidad Institucionales, se identificaron diferencias en función del tipo de demanda (F2,240=5,69; p<0,01; η2=0,045) y no hubo diferencias en función del género (F1,240=0,65; p>0,05; 1-β=0,13). Las innovaciones y alternativas de conciliación relacionadas con el empleo más valoradas fueron la de flexibilidad en los horarios de trabajo y adecuación de horarios; las más valoradas relacionadas con la barrera cuidado de hijos fueron que en la instalación deportiva se ofertaran actividades físicas conjuntas, en las en las que pudiesen participar madres e hijos y que la instalación deportiva ofreciera, en el mismo horario, actividades para ellos y sus hijos, y, por último, las más valoradas en relación con las tareas del hogar, una mayor implicación de la pareja seguida por una mayor implicación de los hijos. ABSTRACT The objectives of this study were to build and validate an instrument to measure the barriers of adult people to the practice of sport and physical activities from the perspective of the social-ecological theory, analyse the presence of the different barriers, as well as the innovations and alternatives regarding conciliation with work and the care of children and home as barriers, identifying the possible differences that exist based on gender and the type of demand of the adult population within the Community of Madrid. For this, a quantitative, descriptive and transversal study was carried out on a representative sample of the resident population of the Community of Madrid, ages ranging from 30 to 64 years old. Given that is an infinite or very large population, and working with an interval of confidence of the 95,5%, and assuming in the population variance, the worst case of p equal to q, the margin of sampling error was ± 5,27. The sample consisted of 360 people (50,3% women, 49,7% men), who completed a questionnaire during face-to-face personal interviews between October and December 2011. The questionnaire included a scale of specific barriers, as well as sub-questionnaires on the innovations and alternatives linked to the three items regarding work, the care of children and home of the barriers scale. The barriers scale was completed by people who practice physical and sport activities and wanted to do other activities, i.e. by the Established Demand; by people who do not practice these activities but would like to do so, i.e. Latent Demand; and by people who do not practice these activities and have no desire to do so, i.e. Absent Demand (n=246). The people who peaked on the three items of the barriers scale regarding work, the care of children and home, then completed specific sub-questionnaires on the innovations and alternatives for conciliation related to these barriers. The metric study of the items and the dimensionality of the barriers scale was carried out through descriptive analyses of the items, as well as correlation analyses and exploratory factor analyses (EFA). This resulted in a barriers scale composed of 13 items that explained 59,1% of the total variability of the data, grouped in four dimensions as follows: Interpersonal Barriers (2 items), Individual Barriers (4 items), Community-Institutional Barriers (4 items) and Obligations-Time Barriers (3 items). The data obtained from the barriers scale and sub-questionnaires on the innovations and alternatives for conciliation were analyzed using software SPSS v. 18. Two-way ANOVA (gender by type of demand) was used for the comparison of quantitative and ordinal variables, and the effect size for this test was quantified with eta squared. The results were expressed as percentages for nominal variables, and as means and standard deviations for quantitative and ordinal variables. The level of risk was set at 0,05. The instrument showed an acceptable reliability (α=0,58) in line with the social-ecological model, providing dimensions that explained the influence levels of the different spheres. The results obtained establish both the adaptation of the psychometric properties of the items, and the validity and reliability of the barriers scale for the practice of physical and sport activities. The different analyses have supported the validity of a four-dimensional structure consistent with the previous theoretical approaches on the social-ecological models, while showing adequate statistical indices. The differences identified in the Individual Barriers dimension were based on the type of demand (F2,237=40,28; p<0,001; η2=0,25) and gender (F1,237=8,72; p<0,01; η2=0,84). The differences identified in the Interpersonal Barriers dimension were based on gender (F1,239 =14,9; p<0,01; η2=0,06) but not on demand (F2,239=2,35; p>0,05; 1-β=0,47). The differences identified for the Obligations-Time Barriers dimension were based on the type of demand (F2,239=3,88; p<0,05; η2=0,03) and did not show differences between men and women (F1,239=1,06; p>0,05; 1-β=0,18). Finally, the differences identified for the Community-Institutional Barriers dimension were based on the type of demand (F2,240=5,69; p<0,01; η2=0,045) and provided no differences based on gender (F1,240=0,65; p>,05; 1-β=0,13). The most valued innovations and alternatives for conciliation regarding work were the adaptation and flexibility of working hours and timetables; the most valued related to the care of children were the offer of joint activities for adults and children in sport centres, as well as separate activities within the same timetable; and, finally, the most valued regarding the home was a higher degree of participation and involvement on the part of the spouse or partner, followed by a higher degree of participation and involvement on the part of the children.

Adapting micro-economy of energy corporations to macroeconomy policies aiming at a sustainable economy

Esta Tesis surgió ante la intensidad y verosimilitud de varias señales o “warnings” asociadas a políticas dirigidas a reducir el peso del petróleo en el sector energético, tanto por razones económicas, como geopolíticas, como ambientales. Como tal Tesis se consolidó al ir incorporando elementos novedosos pero esenciales en el mundo petrolífero, particularmente las “tecnologías habilitantes”, tanto de incidencia directa, como el “fracking” como indirecta, del cual es un gran ejemplo el Vehículo Eléctrico (puro). La Tesis se definió y estructuró para elaborar una serie de indagaciones y disquisiciones, que comportaran un conjunto de conclusiones que fueran útiles para las corporaciones energéticas. También para la comprensión de la propia evolución del sector y de sus prestaciones técnicas y económicas, de cara a dar el servicio que los usuarios finales piden. Dentro de las tareas analíticas y reflexivas de la Tesis, se acuñaron ciertos términos conceptuales para explicar más certeramente la realidad del sector, y tal es el caso del “Investment burden”, que pondera la inversión específica (€/W) requerida por una instalación, con la duración del período de construcción y los riesgos tanto tangibles como regulatorios. Junto a ello la Tesis propone una herramienta de estudio y prognosis, denominada “Market integrated energy efficiency”, especialmente aplicable a dicotomías. Tal es el caso del coche térmico, versus coche eléctrico. El objetivo es optimizar una determinada actividad energética, o la productividad total del sector. Esta Tesis propone varias innovaciones, que se pueden agrupar en dos niveles: el primero dentro del campo de la Energía, y el segundo dentro del campo de las corporaciones, y de manera especial de las corporaciones del sector hidrocarburos. A nivel corporativo, la adaptación a la nueva realidad será función directa de la capacidad de cada corporación para desarrollar y/o comprar las tecnologías que permitan mantener o aumentar cuota de mercado. Las conclusiones de la Tesis apuntan a tres opciones principalmente para un replanteamiento corporativo: - Diversificación energética - Desplazamiento geográfico - Beneficiándose de posibles nuevos nichos tecnológicos, como son: • En upstream: Recuperación estimulada de petróleo mediante uso de energías renovables • En downstream: Aditivos orientados a reducir emisiones • En gestión del cambio: Almacenamiento energético con fines operativos Algunas políticas energéticas siguen la tendencia de crecimiento cero de algunos países de la OCDE. No obstante, la realidad mundial es muy diferente a la de esos países. Por ejemplo, según diversas estimaciones (basadas en bancos de datos solventes, referenciados en la Tesis) el número de vehículos aumentará desde aproximadamente mil millones en la actualidad hasta el doble en 2035; mientras que la producción de petróleo sólo aumentará de 95 a 145 millones de barriles al día. Un aumento del 50% frente a un aumento del 100%. Esto generará un curioso desajuste, que se empezará a sentir en unos pocos años. Las empresas y corporaciones del sector hidrocarburos pueden perder el monopolio que atesoran actualmente en el sector transporte frente a todas las demás fuentes energéticas. Esa pérdida puede quedar compensada por una mejor gestión de todas sus capacidades y una participación más integrada en el mundo de la energía, buscando sinergias donde hasta ahora no había sino distanciamiento. Los productos petrolíferos pueden alimentar cualquier tipo de maquina térmica, como las turbinas Brayton, o alimentar reformadores para la producción masiva de H2 para su posterior uso en pilas combustible. El almacenamiento de productos derivados del petróleo no es ningún reto ni plantea problema alguno; y sin embargo este almacenamiento es la llave para resolver muchos problemas. Es posible que el comercio de petróleo se haga menos volátil debido a los efectos asociados al almacenamiento; pero lo que es seguro es que la eficiencia energética de los usos de ese petróleo será más elevada. La Tesis partía de ciertas amenazas sobre el futuro del petróleo, pero tras el análisis realizado se puede vislumbrar un futuro prometedor en la fusión de políticas medioambientales coercitivas y las nuevas tecnologías emergentes del actual portafolio de oportunidades técnicas. ABSTRACT This Thesis rises from the force and the credibility of a number of warning signs linked to policies aimed at reducing the role of petroleum in the energy industry due to economical, geopolitical and environmental drives. As such Thesis, it grew up based on aggregating new but essentials elements into the petroleum sector. This is the case of “enabling technologies” that have a direct impact on the petroleum industry (such as fracking), or an indirect but deep impact (such as the full electrical vehicle). The Thesis was defined and structured in such a way that could convey useful conclusions for energy corporations through a series of inquiries and treatises. In addition to this, the Thesis also aims at understating la evolution of the energy industry and its capabilities both technical and economical, towards delivering the services required by end users. Within the analytical task performed in the Thesis, new terms were coined. They depict concepts that aid at explaining the facts of the energy industry. This is the case for “Investment burden”, it weights the specific capital investment (€/W) required to build a facility with the time that takes to build it, as well as other tangible risks as those posed by regulation. In addition to this, the Thesis puts forward an application designed for reviewing and predicting: the so called “Market integrated energy efficiency”, especially well-suited for dichotomies, very appealing for the case of the thermal car versus the electric car. The aim is to optimize energy related activity; or even the overall productivity of the system. The innovations proposed in this Thesis can be classified in two tiers. Tier one, within the energy sector; and tier two, related to Energy Corporation in general, but with oil and gas corporations at heart. From a corporate level, the adaptation to new energy era will be linked with the corporation capability to develop or acquire those technologies that will yield to retaining or enhancing market share. The Thesis highlights three options for corporate evolution: - diversification within Energy - geographic displacement - profiting new technologies relevant to important niches of work for the future, as: o Upstream: enhanced oil recovery using renewable energy sources (for upstream companies in the petroleum business) o Downstream: additives for reducing combustion emissions o Management of Change: operational energy storage Some energy policies tend to follow the zero-growth of some OECD countries, but the real thing could be very different. For instance, and according to estimates the number of vehicles in use will grow from 1 billion to more than double this figure 2035; but oil production will only grow from 95 million barrel/day to 145 (a 50% rise of versus an intensification of over a 100%). Hydrocarbon Corporation can lose the monopoly they currently hold over the supply of energy to transportation. This lose can be mitigated through an enhanced used of their capabilities and a higher degree of integration in the world of energy, exploring for synergies in those places were gaps were present. Petroleum products can be used to feed any type of thermal machine, as Brayton turbines, or steam reformers to produce H2 to be exploited in fuel cells. Storing petroleum products does not present any problem, but very many problems can be solved with them. Petroleum trading will likely be less volatile because of the smoothing effects of distributed storage, and indeed the efficiency in petroleum consumption will be much higher. The Thesis kicked off with a menace on the future of petroleum. However, at the end of the analysis, a bright future can be foreseen in the merging between highly demanding environmental policies and the relevant technologies of the currently emerging technical portfolio.

Espacio web para el diseño de un museo virtual de la historia de la informática

El objetivo principal de crear un espacio web para el Museo Histórico de la Informática (MHI) perteneciente a la Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) de la Universidad Politécnica de Madrid (UPM) es la difusión de la historia de la informática entre el público en general. Si bien es cierto que existe ya una página web de consulta del MHI con algunas imágenes y contenido sobre los objetos que allí se exhiben, es también reseñable que se trata de un espacio obsoleto, lleno de carencias y extremadamente difícil de gestionar y actualizar, por lo que se hacía imprescindible actualizar el diseño del espacio web, los contenidos y el sistema de gestión de los mismos, cosa que es de gran interés para un lugar divulgativo. En la actualidad, existen maneras mucho más amigables para el usuario de navegar por una web; y de la misma manera para un administrador, gestionar el contenido de la misma y mantener a los usuarios bien informados de todo lo que se ofrece en cada momento. Esto es posible gracias a los sistemas de gestión de contenidos o content management system (CMS), de los que se hablará lo largo de todo el documento. Estos sistemas, dan una facilidad mucho mayor a los encargados de llevar al día una página web, sin tener que saber de programación, lenguajes o informática en general, ya que incorporan paneles de control muy intuitivos y fáciles de manejar, que son una ventaja tanto para ellos como para los usuarios. Es por esta razón que, hay páginas web como la de las empresas IKEA, Ubuntu o, en especial para el caso que compete al documento, el museo del Louvre usan gestores de contenidos para sus páginas web. Y es que las ventajas y facilidades que ofrece un CMS son realmente interesantes y se tratará de todas ellas en el documento, de la elección del CMS que mejor se ajusta a los requisitos del museo, las restricciones a la hora del despliegue en el ámbito de la ETSIINF y de cómo mejorará esto la calidad visual y divulgativa del MHI. Este trabajo se desarrolla a lo largo de 11 capítulos, en los que se muestra como construir un sitio web, las posibilidades y la elección final para este caso. En el primer capítulo se hace una pequeña introducción de lo que es el proyecto, se especifican los objetivos, la motivación del mismo y el alcance que tiene. En el segundo capítulo se muestra la información que se ha recopilado en el trabajo de investigación que se hace previo al desarrollo. En él se muestran los distintos tipos de páginas web, que tecnologías y lenguajes se pueden usar para su construcción, una comparativa sobre otras entidades similares al MHI, las limitaciones que presenta el entorno y la elección final que se consideró más adecuada para este caso. En el capítulo tres se empieza a desarrollar la solución a través del diseño. Aquí se puede encontrar el diseño de más bajo nivel que se le presenta al cliente para sentar las bases del trabajo, el diseño de alto nivel con un mayor grado de realidad que el anterior y una preparación de lo que serán los planes de prueba. El capítulo cuatro muestra todo lo que se ha usado en la implementación y la integración de la página web: herramientas, tecnologías, plantillas de diseño y módulos que proporcionan distintas funcionalidades. Llegados al capítulo cinco, se puede ver una detallada documentación de los resultados de las pruebas de usabilidad y accesibilidad realizadas, y las conclusiones que subyacen de estas. Una vez acabada la implementación del sitio web del MHI, en el capítulo seis se intenta hacer una labor de consultoría, mostrando precios y presupuestos de las distintas tareas que se han llevado a cabo para la realización de este proyecto. En el capítulo siete se extraen las conclusiones de todo lo acontecido en los capítulos anteriores y en el ocho unas líneas sobre posibles trabajos futuros que se podrían llevar a cabo en base a lo que ya se tiene en la institución, incluido este trabajo. Para facilitar la comprensión y satisfacer la curiosidad del lector, se ha incluido en el capítulo nueve la bibliografía con toda la documentación consultada y en el diez un glosario de términos para la aclaración de términos y acrónimos más técnicos. Para acabar, en el capítulo once se anexionan tanto el documento que se usó para las pruebas de usabilidad como un manual de administrador para el sitio web, que hace más amigable el entorno para las personas que lo tengan que mantener en un futuro.---ABSTRACT---The main goal of creating a website for the Informatics Historical Museum (“Museo Histórico de la Informática” or MHI) located in the Higher Technical School of Informatics Engineers (“Escuela Técnica Superior de Ingenieros Informáticos” or ETSIINF) of the Polytechnic University of Madrid (“Universidad Politécnica de Madrid” UPM), is to promote the aforementioned museum as to increase its reach to the public. While it is true that there already is a consulting website with some pictures and information about the items which are displayed in the building, it is outdated and the data is scarce. Moreover, it is extremely complicated to manage and to regularly update the web page, which is very important for informative/broadcasting media. Currently, there are easier ways for the users of a website to consult whatever information they want, as well as it is now easy for a website manager to display new content and to keep the users informed about what is been offered at every moment. This is possible because of content management systems (CMS), which will be discussed throughout the entire paper. These systems make it easier to use for the administrator of a website to keep it up to date without the necessity for them of having any knowledge or skills in programming, languages or computing, because the systems have an intuitive control panel that is easy to use, which is an advantage for both managers and users. Because of all these reasons, there are lots of companies that use this kind of systems, such as IKEA, Ubuntu or, especially, the Louvre Museum, to which we direct our attention all throughout this report. It is easy to notice that these systems have an important and very interesting number of perks and benefits. In the next chapters of the document we will explain the benefits of the program as well as the choice on the kind of CMS that best suits the requirements of the museum and, finally, the restrictions of the school for the deployment and of how all of this will improve the visual and informational qualities of the MHI. This work is developed over 11 chapters, shown how to build up a website, the possibilities and the final choice for this case. In the first chapter a brief introduction of the project, goals, motivation and scope thereof having specified are done. Before the development of the website, the second chapter shows de information of the researching work. It discusses the different types of websites, technologies and languages that can be used for build-up, a comparison of similar entities to MHI, the limitations of the environment and the final choice was considered more appropriate for this case. Chapter three begins to develop the design of the solution. Here there are the lowest level design that presents the customer to fix any problem, the high level design with a higher degree of reality than the last and the test plans. Chapter four shows everything that has been used in the implementation and integration of the website: tools, technologies, design templates and modules that provide different functionalities. Reaching the fifth chapter, you can see a detailed documentation of the results of the usability and accessibility tests made to some users and the conclusions of it. Once the implementation of MHI website is done, in chapter six there is a consultancy work, showing prices and budgets of the different tasks which were carried out for this project. In chapter seven there are the conclusions of what happened in the previous chapters and eight chapter shows possible future works that could be carried out based on what the institution already have, including this work. To make easier to the reader understand this paper and satisfy his curiosity, the chapter nine includes the bibliography consulted with all the documentation and chapter ten has a glossary of terms and an explanation of technical terms and acronyms. Finally, in chapter eleven there are attached both the document that was used for usability testing as a manual administrator for the website, making the environment friendlier for people who have to maintain it in the future.

Improvement of theoretical storm characterization for different climate conditions

The different theoretical models related with storm wave characterization focus on determining the significant wave height of the peak storm, the mean period and, usually assuming a triangle storm shape, their duration. In some cases, the main direction is also considered. Nevertheless, definition of the whole storm history, including the variation of the main random variables during the storm cycle is not taken into consideration. The representativeness of the proposed storm models, analysed in a recent study using an empirical maximum energy flux time dependent function shows that the behaviour of the different storm models is extremely dependent on the climatic characteristics of the project area. Moreover, there are no theoretical models able to adequately reproduce storm history evolution of the sea states characterized by important swell components. To overcome this shortcoming, several theoretical storm shapes are investigated taking into consideration the bases of the three best theoretical storm models, the Equivalent Magnitude Storm (EMS), the Equivalent Number of Waves Storm (ENWS) and the Equivalent Duration Storm (EDS) models. To analyse the representativeness of the new storm shape, the aforementioned maximum energy flux formulation and a wave overtopping discharge structure function are used. With the empirical energy flux formulation, correctness of the different approaches is focussed on the progressive hydraulic stability loss of the main armour layer caused by real and theoretical storms. For the overtopping structure equation, the total volume of discharge is considered. In all cases, the results obtained highlight the greater representativeness of the triangular EMS model for sea waves and the trapezoidal (nonparallel sides) EMS model for waves with a higher degree of wave development. Taking into account the increase in offshore and shallow water wind turbines, maritime transport and deep vertical breakwaters, the maximum wave height of the whole storm history and that corresponding to each sea state belonging to its cycle's evolution is also considered. The procedure considers the information usually available for extreme waves' characterization. Extrapolations of the maximum wave height of the selected storms have also been considered. The 4th order statistics of the sea state belonging to the real and theoretical storm have been estimated to complete the statistical analysis of individual wave height

Mitochondrial adenine nucleotide translocase is modified oxidatively during aging

The purpose of this study was to test the hypothesis that elevation in protein oxidative damage during the aging process is a targeted rather than a stochastic phenomenon. Oxidative damage to proteins in mitochondrial membranes in the flight muscles of the housefly, manifested as carbonyl modifications, was detected immunochemically with anti-dinitrophenyl antibodies. Adenine nucleotide translocase (ANT) was found to be the only protein in the mitochondrial membranes exhibiting a detectable age-associated increase in carbonyls. The age-related elevation in ANT carbonyl content was correlated with a corresponding loss in its functional activity. Senescent flies that had lost the ability to fly exhibited a relatively higher degree of ANT oxidation and a greater loss of functional activity than their cohorts of the same age that were still able to fly. Exposure of flies to 100% oxygen resulted in an increase in the level of ANT carbonyl content and a loss in its activity. In vitro treatment of mitochondria with a system that generated hydroxyl free radicals caused an increase in ANT carbonyl level and a decrease in ANT exchange activity. ANT was also the only mitochondrial membrane protein exhibiting adducts of the lipid peroxidation product 4-hydroxynonenal. Results of this study indicate that proteins in mitochondrial membranes are modified selectively during aging.

Urokinase-Type Plasminogen Activator Receptor Is Internalized by Different Mechanisms in Polarized and Nonpolarized Madin–Darby Canine Kidney Epithelial Cells

Accumulated data indicate that endocytosis of the glycosylphosphatidyl-inositol-anchored protein urokinase plasminogen activator receptor (uPAR) depends on binding of the ligand uPA:plasminogen activator inhibitor-1 (PAI-1) and subsequent interaction with internalization receptors of the low-density lipoprotein receptor family, which are internalized through clathrin-coated pits. This interaction is inhibited by receptor-associated protein (RAP). We show that uPAR with bound uPA:PAI-1 is capable of entering cells in a clathrin-independent process. First, HeLaK44A cells expressing mutant dynamin efficiently internalized uPA:PAI-1 under conditions in which transferrin endocytosis was blocked. Second, in polarized Madin–Darby canine kidney (MDCK) cells, which expressed human uPAR apically, the low basal rate of uPAR ligand endocytosis, which could not be inhibited by RAP, was increased by forskolin or phorbol ester (phorbol 12-myristate 13-acetate), which selectively up-regulate clathrin-independent endocytosis from the apical domain of epithelial cells. Third, in subconfluent nonpolarized MDCK cells, endocytosis of uPA:PAI-1 was only decreased marginally by RAP. At the ultrastructural level uPAR was largely excluded from clathrin-coated pits in these cells and localized in invaginated caveolae only in the presence of cross-linking antibodies. Interestingly, a larger fraction of uPAR in nonpolarized relative to polarized MDCK cells was insoluble in Triton X-100 at 0°C, and by surface labeling with biotin we also show that internalized uPAR was mainly detergent insoluble, suggesting a correlation between association with detergent-resistant membrane microdomains and higher degree of clathrin-independent endocytosis. Furthermore, by cryoimmunogold labeling we show that 5–10% of internalized uPAR in nonpolarized, but not polarized, MDCK cells is targeted to lysosomes by a mechanism that is regulated by ligand occupancy.

Synaptic Vesicles Form by Budding from Tubular Extensions of Sorting Endosomes in PC12 Cells

The putative role of sorting early endosomes (EEs) in synaptic-like microvesicle (SLMV) formation in the neuroendocrine PC12 cell line was investigated by quantitative immunoelectron microscopy. By BSA-gold internalization kinetics, four distinct endosomal subcompartments were distinguished: primary endocytic vesicles, EEs, late endosomes, and lysosomes. As in other cells, EEs consisted of vacuolar and tubulovesicular subdomains. The SLMV marker proteins synaptophysin and vesicle-associated membrane protein 2 (VAMP-2) localized to both the EE vacuoles and associated tubulovesicles. Quantitative analysis showed that the transferrin receptor and SLMV proteins colocalized to a significantly higher degree in primary endocytic vesicles then in EE-associated tubulovesicles. By incubating PC12 cells expressing T antigen-tagged VAMP (VAMP-TAg) with antibodies against the luminal TAg, the recycling pathway of SLMV proteins was directly visualized. At 15°C, internalized VAMP-TAg accumulated in the vacuolar domain of EEs. Upon rewarming to 37°C, the labeling shifted to the tubular part of EEs and to newly formed SLMVs. Our data delineate a pathway in which SLMV proteins together with transferrin receptor are delivered to EEs, where they are sorted into SLMVs and recycling vesicles, respectively.

Spontaneous heterosis in larval life-history traits of hemiclonal frog hybrids

European water frog hybrids Rana esculenta (Rana ridibunda × Rana lessonae) reproduce hemiclonally, transmitting only their ridibunda genome to gametes. We compared fitness-related larval life-history traits of natural R. esculenta from Poland with those of the two sympatric parental species and of newly generated F1 hybrids. Compared with either parental species, F1 hybrid offspring had higher survival, higher early growth rates, a more advanced developmental stage by day 49, and earlier metamorphosis, but similar mass at metamorphosis. R. esculenta from natural lineages had trait values intermediate between those of F1 offspring and of the two parental species. The data support earlier observations on natural R. esculenta that had faster larval growth, earlier metamorphosis, and higher resistance to hypoxic conditions compared with either parental species. Observing larval heterosis in F1 hybrids in survival, growth rate, and time to metamorphosis, however, at an even higher degree than in hybrids from natural lineages, demonstrates that heterosis is spontaneous and results from hybridity per se rather than from subsequent interclonal selection; in natural lineages the effects of hybridity and of clonal history are confounded. This is compelling evidence for spontaneous heterosis in hybrid clonals. Results on hemiclonal fish hybrids (Poeciliopsis) showed no spontaneous heterosis; thus, our frog data are not applicable to all hybrid clonals. Our data do show, however, that heterosis is an important potential source for the extensively observed ecological success of hybrid clonals. We suggest that heterosis and interclonal selection together shape fitness of natural R. esculenta lineages.

Crystallographic comparison of the estrogen and progesterone receptor’s ligand binding domains

The 2.8-Å crystal structure of the complex formed by estradiol and the human estrogen receptor-α ligand binding domain (hERαLBD) is described and compared with the recently reported structure of the progesterone complex of the human progesterone receptor ligand binding domain, as well as with similar structures of steroid/nuclear receptor LBDs solved elsewhere. The hormone-bound hERαLBD forms a distinctly different and probably more physiologically important dimer interface than its progesterone counterpart. A comparison of the specificity determinants of hormone binding reveals a common structural theme of mutually supported van der Waals and hydrogen-bonded interactions involving highly conserved residues. The previously suggested mechanism by which the estrogen receptor distinguishes estradiol’s unique 3-hydroxy group from the 3-keto function of most other steroids is now described in atomic detail. Mapping of mutagenesis results points to a coactivator-binding surface that includes the region around the “signature sequence” as well as helix 12, where the ligand-dependent conformation of the activation function 2 core is similar in all previously solved steroid/nuclear receptor LBDs. A peculiar crystal packing event displaces helix 12 in the hERαLBD reported here, suggesting a higher degree of dynamic variability than expected for this critical substructure.