Measuring supply chain management practices

Purpose: This paper aims to perform an empirical investigation about the constructs and indicators of the supply chain management practices framework. Design/methodology/approach: The measuring framework proposed is based on a survey that was carried out on 107 Brazilian companies. Statistical techniques were employed to verify, validate, and test the reliability of the constructs and their indicators. To validate this framework principal component analysis and structural equation modeling techniques were used. Findings: In general, previous studies suggest six constructs for measuring the supply chain management practices framework. However, in this study a framework was achieved with four constructs of supply chain management practices, namely, supply chain (SC) integration for production planning and control (PPC) support, information sharing about products and targeting strategies, strategic relationship with customer and supplier, and support customer order. This framework has adequate levels of validity and reliability. Research limitations/implications: The main limitation of this study was that only a small sample of companies in a single sector and country were surveyed, and therefore there needs to be further research considering the special conditions in other countries. Originality/value: This study investigated statistically set indicators to discuss the topic supply chain management practices. The framework obtained has good quality of validity and reliability indicators. Thus, an alternative framework has been added to measure supply chain management practices, which is currently a popular topic in the supply chain mainstream literature. Both defined constructs and the validated indicators can be used in other studies on supply chain management. © Emerald Group Publishing Limited.

Proposal for a code of good practice in statistics in Latin America and the Caribbean and implementation plan for 2012-2013

Incluye Bibliografía

Integration practices for the technological innovation of products: Case studies at two large technological companies

Studies on innovation and technology management have emphasized the importance of integration between the research and development (R&D) department and others involved with the product development process (PDP) as a relevant practice for the good performance of technological innovation of product activities. This study addresses the topic of transfers of technologies to new product projects and also integration practices between the R&D department and others involved with the PDP. A qualitative study was conducted that was operationalized through two case studies at large high-tech companies: One is Brazilian and the other is a multinational subsidiary in Brazil. Among its main result, this paper represents and analyzes management practices that are favorable to integration in product development projects that demand development and transfer of technologies, such as: participation of R&D personnel in market activities, the adoption of virtual interaction mechanisms, and the application of methods such as technology roadmaps. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Effect of image resolution manipulation in rearfoot angle measurements obtained with photogrammetry

The aim of this study was to investigate the influence of image resolution manipulation on the photogrammetric measurement of the rearfoot static angle. The study design was that of a reliability study. We evaluated 19 healthy young adults (11 females and 8 males). The photographs were taken at 1536 pixels in the greatest dimension, resized into four different resolutions (1200, 768, 600, 384 pixels) and analyzed by three equally trained examiners on a 96-pixels per inch (ppi) screen. An experienced physiotherapist marked the anatomic landmarks of rearfoot static angles on two occasions within a 1-week interval. Three different examiners had marked angles on digital pictures. The systematic error and the smallest detectable difference were calculated from the angle values between the image resolutions and times of evaluation. Different resolutions were compared by analysis of variance. Inter- and intra-examiner reliability was calculated by intra-class correlation coefficients (ICC). The rearfoot static angles obtained by the examiners in each resolution were not different (P > 0.05); however, the higher the image resolution the better the inter-examiner reliability. The intra-examiner reliability (within a 1-week interval) was considered to be unacceptable for all image resolutions (ICC range: 0.08-0.52). The whole body image of an adult with a minimum size of 768 pixels analyzed on a 96-ppi screen can provide very good inter-examiner reliability for photogrammetric measurements of rearfoot static angles (ICC range: 0.85-0.92), although the intra-examiner reliability within each resolution was not acceptable. Therefore, this method is not a proper tool for follow-up evaluations of patients within a therapeutic protocol.

Visualization, manipulation and force spectroscopy of cylindrical polymer brushes

The Ph.D. thesis deals with the conformational study of individual cylindrical polymer brush molecules using atomic force microscopy (AFM). Imaging combined with single molecule manipulation has been used to unravel questions concerning conformational changes, desorption behavior and mechanical properties of individual macromolecules and supramolecular structures. In the first part of the thesis (chapter 5) molecular conformations of cylindrical polymer brushes with poly-(N-isopropylacrylamide) (PNIPAM) side chains were studied in various environmental conditions. Also micelle formation of cylindrical brush-coil blockcopolymers with polyacrylic acid side chains and polystyrene coil have been visualized. In chapter 6 the mechanical properties of single cylindrical polymer brushes with (PNIPAM) side chains were investigated. Assuming that the brushes adopt equilibrium conformation on the surface, an average persistence length of lp= (29 ± 3) nm was determined by the end-to-end distance vs. contour length analysis in terms of the wormlike chain (WLC) model. Stretching experiments suggest that an exact determination of the persistence length using force extension curves is impeded by the contribution of the side chains. Modeling the stretching of the bottle brush molecule as extension of a dual spring (side chain and main chain) explains the frequently observed very low persistence length arising from a dominant contribution of the side chain elasticity at small overall contour lengths. It has been shown that it is possible to estimate the “true” persistence length of the bottle brush molecule from the intercept of a linear extrapolation of the inverse square root of the apparent persistence length vs. the inverse contour length plot. By virtue of this procedure a “true” persistence length of 140 nm for the PNIPAM brush molecules is predicted. Chapter 7 and 8 deal with the force-extension behavior of PNIPAM cylindrical brushes studied in poor solvent conditions. The behavior is shown to be qualitatively different from that in a good solvent. Force induced globule-cylinder conformational changes are monitored using “molecule specific force spectroscopy” which is a combined AFM imaging and SMFS technique. An interesting behavior of the unfolding-folding transitions of single collapsed PNIPAM brush molecules has been observed by force spectroscopy using the so called “fly-fishing” mode. A plateau force is observed upon unfolding the collapsed molecule, which is attributed to a phase transition from a collapsed brush to a stretched conformation. Chapter 9 describes the desorption behavior of single cylindrical polyelectrolyte brushes with poly-L-lysine side chains deposited on a mica surface using the “molecule specific force spectroscopy” technique to resolve statistical discrepancies usually observed in SMFS experiments. Imaging of the brushes and inferring the persistence length from a end-to-end distance vs. contour length analysis results in an average persistence length of lp = (25 ± 5) nm assuming that the chains adopt their equilibrium conformation on the surface. Stretching experiments carried out on individual poly-L-lysine brush molecules by force spectroscopy using the “fly-fishing” mode provide a persistence length in the range of 7-23 nm in reasonable accordance with the imaging results. In chapter 10 the conformational behavior of cylindrical poly-L-lysine brush-sodium dodecyl sulfate complexes was studied using AFM imaging. Surfactant induced cylinder to helix like to globule conformational transitions were observed.

The market manipulation regime in the European Union

Market manipulation is an illegal practice that enables a person can profit from practices that artificially raise or lower the prices of an instrument in the financial markets. Its prohibition is based on the 2003 Market Abuse Directive in the EU. The current market manipulation regime was broadly considered as a big success except for enforcement and supervisory inconsistencies in the Member States at the initial. A review of the market manipulation regime began at the end of 2007, which became quickly incorporated into the wider EU crisis-era reform program. A number of weaknesses of current regime have been identified, which include regulatory gaps caused by the development of trading venues and financial products, regulatory gaps concerning cross-border and cross-markets manipulation (particular commodity markets), legal uncertainty as a result of various implementation, and inefficient supervision and enforcement. On 12 June 2014, a new regulatory package of market abuse, Market Abuse Regulation and Directive on criminal sanctions for market abuse, has been adopted. And several changes will be made concerning the EU market manipulation regime. A wider scope of the regime and a new prohibition of attempted market manipulation will ensure the prevention of market manipulation at large. The AMPs will be subject to strict scrutiny of ESMA to reduce divergences in implementation. In order to enhance efficiency of supervision and enforcement, powers of national competent authorities will be strengthened, ESMA is imposed more power to settle disagreement between national regulators, and the administrative and criminal sanctioning regimes are both further harmonized. In addition, the protection of fundamental rights is stressed by the new market manipulation regime, and some measures are provided to guarantee its realization. Further, the success EU market manipulation regime could be of significant reference to China, helping China to refine its immature regime.

Appraising and selecting conservation measures to mitigate desertification and land degradation based on stakeholder participation and global best practices

Most desertification research focuses on degradation assessments without putting sufficient emphasis on prevention and mitigation strategies, although the concept of Sustainable Land Management (SLM) is increasingly being acknowledged. A variety of already applied conservation measures exist at the local level, but they are not adequately recognised, evaluated and shared, either by land users, technicians, researchers, or policy makers. Likewise, collaboration between research and implementation is often insufficient. The aim of this paper is to present a new methodology for a participatory process of appraising and selecting desertification mitigation strategies, and to present first experiences from its application in the EU-funded DESIRE project. The methodology combines a collective learning and decision approach with the use of evaluated global best practices. In three parts, it moves through a concise process, starting with identifying land degradation and locally applied solutions in a stakeholder workshop, leading to assessing local solutions with a standardised evaluation tool, and ending with jointly selecting promising strategies for implementation with the help of a decision support tool. The methodology is currently being applied in 16 study sites. Preliminary analysis from the application of the first part of the methodology shows that the initial stakeholder workshop results in a good basis for stakeholder cooperation, and in promising land conservation practices for further assessment. Study site research teams appreciated the valuable results, as burning issues and promising options emerged from joint reflection. The methodology is suitable to initiate mutual learning among different stakeholder groups and to integrate local and scientific knowledge.

The mark of a good healer: Examining health care behaviors in the Vietnamese community

The purpose of this study was to conduct a descriptive, exploratory analysis of the utilization of both traditional healing methods and western biomedical approaches to health care among members of the Vietnamese community in Houston, Texas. The first goal of the study was to identify the type(s) of health care that the Vietnamese use. The second goal was to highlight the numerous factors that may influence why certain health care choices are made. The third goal of this study was to examine the issue of preference to determine which practices would be used if limiting factors did not exist. ^ There were 81 participants, consisting of males and females who were 18 years or older. The core groups of participants were Vietnamese students from the University of Houston-Downtown and volunteer staff members from VN TeamWork. Asking the students and staff members to recommend others for the study used the snowball method of recruiting additional participants. ^ Surveys and informed consents were in English and Vietnamese. The participants were given the choice to take the surveys face-to-face or on their own. Surveys consisted of structured questions with predetermined choices, as well as, open-ended questions to allow more detailed information. The quantitative and qualitative data were coded and entered into a database, using SPSS software version 15.0. ^ Results indicated that participants used both traditional (38.3%) and biomedical (59.3%) healing, with 44.4% stating that it depended on the illness as to treatment. Coining was the most used traditional healing method, clearly still used by all ages. Coining was also the method most used when issues regarding fear and delayed western medical treatment were involved. It was determined that insurance status, more than household income, guided health care choices. A person's age, number of years spent in the United States, age at migration, and the use of certain traditional healing methods like coining all played a role in the importance of the health care practitioner speaking Vietnamese. The most important finding was that 64.2% of the participants preferred both traditional and western medicine because both methods work. ^

A review of economic analysis in the vaccination program; decision making and governance: Adivisory Committee on Immunization Practices (ACIP)

The Advisory Committee on Immunization Practices (ACIP) develops written recommendations for the routine administration of vaccines to children and adults in the U.S. civilian population. The ACIP is the only entity in the federal government that makes such recommendations. ACIP elaborates on selection of its members and rules out concerns regarding its integrity, but fails to provide information about the importance of economic analysis in vaccine selection. ACIP recommendations can have large health and economic consequences. Emphasis on economic evaluation in health is a likely response to severe pressures of the federal and state health budget. This study describes the economic aspects considered by the ACIP while sanctioning a vaccine, and reviews the economic evaluations (our economic data) provided for vaccine deliberations. A five year study period from 2004 to 2009 is adopted. Publicly available data from ACIP web database is used. Drummond et al. (2005) checklist serves as a guide to assess the quality of economic evaluations presented. Drummond et al.'s checklist is a comprehensive hence it is unrealistic to expect every ACIP deliberation to meet all of their criteria. For practical purposes we have selected seven criteria that we judge to be significant criteria provided by Drummond et al. Twenty-four data points were obtained in a five year period. Our results show that out of the total twenty-four data point‘s (economic evaluations) only five data points received a score of six; that is six items on the list of seven were met. None of the data points received a perfect score of seven. Seven of the twenty-four data points received a score of five. A minimum of a two score was received by only one of the economic analyses. The type of economic evaluation along with the model criteria and ICER/QALY criteria met at 0.875 (87.5%). These three criteria were met at the highest rate among the seven criteria studied. Our study findings demonstrate that the perspective criteria met at 0.583 (58.3%) followed by source and sensitivity analysis criteria both tied at 0.541 (54.1%). The discount factor was met at 0.250 (25.0%).^ Economic analysis is not a novel concept to the ACIP. It has been practiced and presented at these meetings on a regular basis for more than five years. ACIP‘s stated goal is to utilize good quality epidemiologic, clinical and economic analyses to help policy makers choose among alternatives presented and thus achieve a better informed decision. As seen in our study the economic analyses over the years are inconsistent. The large variability coupled with lack of a standardized format may compromise the utility of the economic information for decision-making. While making recommendations, the ACIP takes into account all available information about a vaccine. Thus it is vital that standardized high quality economic information is provided at the ACIP meetings. Our study may provide a call for the ACIP to further investigate deficiencies within the system and thereby to improve economic evaluation data presented. ^

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generation

Looking inside for good practice in Deaf bilingual education: a participatory SWOT analysis

Presentation to the Disability Studies Conference, Lancaster University, September 7-9, 2010.

The Art of Enduring Contradictory Goals: Challenges in the Institutional Co‐construction of a ‘Good Death’

This paper focuses on the normative notion of ‘good death’, its practical relevance as a frame of reference for ‘death work’ procedures in institutional elder care in Switzerland and the ways in which it may be challenged within migrant ‘dying trajectories’. In contemporary palliative care, the concept of ‘good death’ focuses on the ideal of an autonomous dying person, cared for under a specialised biomedical authority. Transferred to the nursing home context, characterised by long-term basic care for the very old under conditions of scarce resources, the notion of ‘good death’ is broken down into ready-to-use, pragmatic elements of daily routines. At the same time, nursing homes are increasingly confronted with socially and culturally diversified populations. Based on ethnographic findings, we give insight into current practices of institutional ‘death work’ and tensions arising between contradicting notions of a ‘good death’, by referring to decision-making, life-prolonging measures, notions on food/feeding and the administration of sedative painkillers.

Best management practices for pork production.

Best Management Practices or BMPs refer to operating techniques and good housekeeping principals for reducing and preventing environmental problems. The overall philosophy behind BMPs is to conduct everyday activities in a more environmentally sound manner. By using BMPs, a facility can help protect the environment, save money, and improve community well-being all at the same time.

Are Media ‘Watchdogs’ of Illegal State Practices in Post-Cold War Liberal Democracies?: A Case-Study of the Coke Extradition

Thesis (Master's)--University of Washington, 2016-06

'Looking good, feeling better': Consumption, Control and the Aesthetics of Exclusivity in the Service Encounter

The majority of ‘service’ literature has focused on the production side of service work (i.e. employees and management), while treating the role of the customer and/or consumer as secondary (Korczynski and Ott, 2004). Those authors who have addressed the role consumption plays in shaping and maintaining individuals' self- identity have tended to overemphasize the dominance of consumer culture in shaping ‘our consciousness’ (Ritzer, 1999), with little in the way of empirical evidence to support these assertions. This paper develops the conceptualization of service work and consumer culture literature, by placing more emphasis on the customer in the service encounter. Using an ethnographic study of a ‘high class’ department store, this paper addresses employee and customer identity and the nature of managerial, employee and customer control within this ‘exclusive’ context. Of particular interest is how employees and customer’s ‘embody’ this control. Using Bourdieu’s (1986) conception of class and habitus, the concept of exclusivity goes beyond the management /service worker dyad by providing a means of investigating identity control by the organization over both customers and service workers. However, an organization’s exclusivity is not a closed normative pursuit of control, and shows this enterprise is part of a contested terrain, while revealing the ambiguity and ‘openness’ of control practices and pursuits. In order to uphold the ideal of exclusivity, management, service workers and customers must all engage in a precarious quest for establishing and maintaining a sense of control and/or identity. This paper demonstrates the continuing contradiction between bureaucratic practices of control and consumer culture, and highlights the need for research that investigates the context -dependent nature of control in service-related and consumer studies.