A straightforward method to obtain the cohesive laws of bonded joints under mode I loading

A simple procedure to measure the cohesive laws of bonded joints under mode I loading using the double cantilever beam test is proposed. The method only requires recording the applied load–displacement data and measuring the crack opening displacement at its tip in the course of the experimental test. The strain energy release rate is obtained by a procedure involving the Timoshenko beam theory, the specimen’s compliance and the crack equivalent concept. Following the proposed approach the influence of the fracture process zone is taken into account which is fundamental for an accurate estimation of the failure process details. The cohesive law is obtained by differentiation of the strain energy release rate as a function of the crack opening displacement. The model was validated numerically considering three representative cohesive laws. Numerical simulations using finite element analysis including cohesive zone modeling were performed. The good agreement between the inputted and resulting laws for all the cases considered validates the model. An experimental confirmation was also performed by comparing the numerical and experimental load–displacement curves. The numerical load–displacement curves were obtained by adjusting typical cohesive laws to the ones measured experimentally following the proposed approach and using finite element analysis including cohesive zone modeling. Once again, good agreement was obtained in the comparisons thus demonstrating the good performance of the proposed methodology.

Lithostratigraphy, sequence stratigraphy and depositional setting of the Pliensbachian and Toarcian series in the Lusitanian Basin, Portugal

In the Lusitanian Basin (Central Portugal), the Middle-Upper Liassic series are characterized by an expressive marly limestone accumulation, sediments that were deposited on a homoclinal carbonate ramp. These series belong to the Vale das Fontes, Lemede, S. Gião (and the lateral equivalents Prado and Cabo Carvoeiro Formations) and, partially, to the Póvoa da Lomba Formations. These units, in great part controlled by an accurate ammonite biostratigraphic scale, are organized into two secondorder transgressive-regressive sequences. The first one (SP) is dated of early Pliensbachian/lowermost early Toarcian age; the second (ST) is dated of early Toarcian to early Aalenian.

Multiple sequence alignment correction using constraints

Trabalho apresentado no âmbito do European Master in Computational Logics, como requisito parcial para obtenção do grau de Mestre em Computational Logics

A teaching-learning sequence of colour informed by history and philosophy of science

In this work, we present a teaching-learning sequence on colour intended to a pre-service elementary teacher programme informed by History and Philosophy of Science. Working in a socio-constructivist framework, we made an excursion on the history of colour. Our excursion through history of colour, as well as the reported misconception on colour helps us to inform the constructions of the teaching-learning sequence. We apply a questionnaire both before and after each of the two cycles of action-research in order to assess students’ knowledge evolution on colour and to evaluate our teaching-learning sequence. Finally, we present a discussion on the persistence of deep-rooted alternative conceptions.

A didactic sequence of elementary geometric optics Informed by history and philosophy of science

The concepts and instruments required for the teaching and learning of geometric optics are introduced in the didactic processwithout a proper didactic transposition. This claim is secured by the ample evidence of both wide- and deep-rooted alternative concepts on the topic. Didactic transposition is a theory that comes from a reflection on the teaching and learning process in mathematics but has been used in other disciplinary fields. It will be used in this work in order to clear up the main obstacles in the teachinglearning process of geometric optics. We proceed to argue that since Newton’s approach to optics, in his Book I of Opticks, is independent of the corpuscular or undulatory nature of light, it is the most suitable for a constructivist learning environment. However, Newton’s theory must be subject to a proper didactic transposition to help overcome the referred alternative concepts. Then is described our didactic transposition in order to create knowledge to be taught using a dialogical process between students’ previous knowledge, history of optics and the desired outcomes on geometrical optics in an elementary pre-service teacher training course. Finally, we use the scheme-facet structure of knowledge both to analyse and discuss our results as well as to illuminate shortcomings that must be addressed in our next stage of the inquiry.

The influence of task design on upper limb muscles fatigue during low-load repetitive work: A systematic review

Ergonomic interventions such as increased scheduled breaks or job rotation have been proposed to reduce upper limb muscle fatigue in repetitive low-load work. This review was performed to summarize and analyze the studies investigating the effect of job rotation and work-rest schemes, as well as, work pace, cycle time and duty cycle, on upper limb muscle fatigue. The effects of these work organization factors on subjective fatigue or discomfort were also analyzed. This review was based on relevant articles published in PubMed, Scopus and Web of Science. The studies included in this review were performed in humans and assessed muscle fatigue in upper limbs. 14 articles were included in the systematic review. Few studies were performed in a real work environment and the most common methods used to assess muscle fatigue were surface electromyography (EMG). No consistent results were found related to the effects of job rotation on muscle activity and subjective measurements of fatigue. Rest breaks had some positive effects, particularly in perceived discomfort. The increase in work pace reveals a higher muscular load in specific muscles. The duration of experiments and characteristics of participants appear to be the factors that most have influenced the results. Future research should be focused on the improvement of the experimental protocols and instrumentation, in order to the outcomes represent adequately the actual working conditions. Relevance to industry: Introducing more physical workload variation in low-load repetitive work is considered an effective ergonomic intervention against muscle fatigue and musculoskeletal disorders in industry. Results will be useful to identify the need of future research, which will eventually lead to the adoption of best industrial work practices according to the workers capabilities.

The influence of pauses on the fatigue of upper limb muscles during the task of ironing

The aim of this study was to analyze the influence of position and pauses on muscle activity and fatigue during the task of ironing. Ten female participants performed the task of ironing in two different positions (standing and sitting) for 10 min each with a 1-min pause at the end of each task. Muscle activity and fatigue from the upper trapezium, anterior deltoid, and pectoralis major were analyzed using surface electromyography. The results showed that the positions had no significant influence on muscle activity; nevertheless, they had significant influence on muscular fatigue. In addition, the pauses were possibly beneficial in decreasing the muscle fatigue, but the results were not conclusive.

Fatigue life assessment of exhaust systems for naval gas turbines

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Dynamic stability metrics for the container loading problem

The Container Loading Problem (CLP) literature has traditionally evaluated the dynamic stability of cargo by applying two metrics to box arrangements: the mean number of boxes supporting the items excluding those placed directly on the floor (M1) and the percentage of boxes with insufficient lateral support (M2). However, these metrics, that aim to be proxies for cargo stability during transportation, fail to translate real-world cargo conditions of dynamic stability. In this paper two new performance indicators are proposed to evaluate the dynamic stability of cargo arrangements: the number of fallen boxes (NFB) and the number of boxes within the Damage Boundary Curve fragility test (NB_DBC). Using 1500 solutions for well-known problem instances found in the literature, these new performance indicators are evaluated using a physics simulation tool (StableCargo), replacing the real-world transportation by a truck with a simulation of the dynamic behaviour of container loading arrangements. Two new dynamic stability metrics that can be integrated within any container loading algorithm are also proposed. The metrics are analytical models of the proposed stability performance indicators, computed by multiple linear regression. Pearson’s r correlation coefficient was used as an evaluation parameter for the performance of the models. The extensive computational results show that the proposed metrics are better proxies for dynamic stability in the CLP than the previous widely used metrics.

MOLECULAR CHARACTERIZATION AND SEQUENCE PHYLOGENETIC ANALYSIS OF SURFACE ANTIGEN 3 (SAG3) GENE OF LOCAL INDIAN ISOLATES (CHENNAI AND IZATNAGAR) OF Toxoplasma gondii

Context and objective:The molecular characterization of local isolates of Toxoplasma gondii is considered significant so as to assess the homologous variations between the different loci of various strains of parasites.Design and setting:The present communication deals with the molecular cloning and sequence analysis of the 1158 bp entire open reading frame (ORF) of surface antigen 3 (SAG3) of two Indian T. gondii isolates (Chennai and Izatnagar) being maintained as cryostock at the IVRI.Method:The surface antigen 3 (SAG3) of two local Indian isolates were cloned and sequenced before being compared with the available published sequences.Results:The sequence comparison analysis revealed 99.9% homology with the standard published RH strain sequence of T. gondii. The strains were also compared with other established published sequences and found to be most related to the P-Br strain and CEP strain (both 99.3%), and least with PRU strain (98.4%). However, the two Indian isolates had 100% homology between them.Conclusion:Finally, it was concluded that the Indian isolates were closer to the RH strain than to the P-Br strain (Brazilian strain), the CEP strain and the PRU strains (USA), with respect to nucleotide homology. The two Indian isolates used in the present study are known to vary between themselves, as far as homologies related to other genes are concerned, but they were found to be 100% homologous as far as SAG3 locus is concerned. This could be attributed to the fact that this SAG3 might be a conserved locus and thereby, further detailed studies are thereby warranted to exploit the use of this particular molecule in diagnostics and immunoprophylactics. The findings are important from the point of view of molecular phylogeny.

Long-term behaviour of railway transitions under dynamic loading application to soft soil sites

Dissertação para obtenção do Grau de Doutor em Engenharia Civil

Detection of enteroviral sequence in endomyocardial tissues from patients with cardiac diseases in Northern Brazil

In the present report we describe the results from a pilot study aimed at detecting enterovirus sequence in cardiac tissues, obtained through endomyocardial biopsies, from patients suffering from cardiac diseases in the Amazon region. Six samples that were collected from three patients were analysed by RT-PCR showing 3 positive and 3 negative results. These preliminary findings suggest the participation of enteroviruses in the etiology of cardiac diseases, mainly myocarditis, and warrant further and broader local studies on this subject.

A first case of protease codon 35 amino acid insertion in a HIV-1 subtype B sequence detected in the Bauru region, state of São Paulo, Brazil: case report

Amino acid insertions in the protease have rarely been described in HIVinfected patients. One of these insertions has recently been described in codon 35, although its impact on resistance remains unknown. This study presents a case of an HIV variant with an insertion in codon 35 of the protease, described for the first time in Bauru, State of Sao Paulo, Brazil, circulating in a 38-year-old caucasian male with asymptomatic HIV infection since 1997. The variant isolated showed a codon 35 insertion of two amino acids in the protease: a threonine and an aspartic acid, resulting in the amino acid sequence E35E_TD.

Portuguese plain architecture: history opening a closed sequence

The paper will address George Kubler’s Portuguese Plain Architecture [PPA] (1972) and its effect in Portuguese architectural practice. Kubler’s philosophy of art history implied that closed sequences of objects could be opened by several reasons. Thus, it will be argued that there is an effect upon Portuguese architecture post 1974, that is apparent by the reemergence of some of the form classes treated by Kubler. This was mostly achieved through the popularity of Kubler’s book within architectural practice, scholarship and moreover by the establishment of the term “Plain Architecture” in portuguese architectural vocabulary. Plain Architecture of the seventeenth and eighteenth centuries shared some qualities with the architecture to be built in post‑revolutionary Portugal, most importantly the effect that could be achieved with low budget buildings that were responding to a situation of crisis, and simultaneously exhaled aristocratic sparsity. The connection of PPA with the ideological attributes of early modernism and the political context of the time catalysed the reemergence of a new order of Portuguese Plain that resonates still in contemporary architecture.

Fatigue life assessment of endodontic instruments subjected to multi planar curvature

This present study aimed to investigate the fatigue life of unused (new) endodontic instruments made of NiTi with control memory by Coltene™ and subjected to the multi curvature of a mandibular first molar root canal. Additionally, the instrument‟s structural behaviour was analysed through non-linear finite element analysis (FEA). The fatigue life of twelve Hyflex™ CM files was assessed while were forced to adopt a stance with multiple radius of curvature, similar to the ones usually found in a mandibular first molar root canal; nine of them were subjected to Pecking motion, a relative movement of axial type. To achieve this, it was designed an experimental setup with the aim of timing the instruments until fracture while worked inside a stainless steel mandibular first molar model with relative axial motion to simulate the pecking motion. Additionally, the model‟s root canal multi-curvature was confirmed by radiography. The non-linear finite element analysis was conducted using the computer aided design software package SolidWorks™ Simulation, in order to define the imposed displacement required by the FEA, it was necessary to model an endodontic instrument with simplified geometry using SolidWorks™ and subsequently analyse the geometry of the root canal CAD model. The experimental results shown that the instruments subjected to pecking motion displayed higher fatigue life values and higher lengths of fractured tips than those with only rotational relative movement. The finite element non-linear analyses shown, for identical conditions, maximum values for the first principal stress lower than the yield strength of the material and those were located in similar positions to the instrument‟s fracture location determined by the experimental testing results.