Integrin-Specific Mechanoresponses to Compression and Extension Probed by Cylindrical Flat-Ended AFM Tips in Lung Cells

Cells from lung and other tissues are subjected to forces of opposing directions that are largely transmitted through integrin-mediated adhesions. How cells respond to force bidirectionality remains ill defined. To address this question, we nanofabricated flat-ended cylindrical Atomic Force Microscopy (AFM) tips with ~1 µm2 cross-section area. Tips were uncoated or coated with either integrin-specific (RGD) or non-specific (RGE/BSA) molecules, brought into contact with lung epithelial cells or fibroblasts for 30 s to form focal adhesion precursors, and used to probe cell resistance to deformation in compression and extension. We found that cell resistance to compression was globally higher than to extension regardless of the tip coating. In contrast, both tip-cell adhesion strength and resistance to compression and extension were the highest when probed at integrin-specific adhesions. These integrin-specific mechanoresponses required an intact actin cytoskeleton, and were dependent on tyrosine phosphatases and Ca2+ signaling. Cell asymmetric mechanoresponse to compression and extension remained after 5 minutes of tip-cell adhesion, revealing that asymmetric resistance to force directionality is an intrinsic property of lung cells, as in most soft tissues. Our findings provide new insights on how lung cells probe the mechanochemical properties of the microenvironment, an important process for migration, repair and tissue homeostasis.

Fluctuaciones de la extension del casquete glacial de la isla de Livingston (Shetland del sur) desde 1956 hasta 1996.

A partir de documentos cartográficos e imágenes de satélite se constata un 4,31% de reducción de extensión del casquete glacial de la isla Livingston desde 1956 hasta 1996. Se detecta la influencia de factores locales, fundamentalmente de tipo topogr á fico, que condicionan los avances y retrocesos del frente glacial en los diferentes sectores de la costa y se establece un modelo simple en el que se relaciona la reducción del conjunto del casquete con el calentamiento atmosférico experimentado en los últimos decenios en la zona de la Península Antártica.

Synthesis of highly focused fields with circular polarization at any transverse plane

We develop a method for generating focused vector beams with circular polarization at any transverse plane. Based on the Richards-Wolf vector model, we derive analytical expressions to describe the propagation of these set of beams near the focal area. Since the polarization and the amplitude of the input beam are not uniform, an interferometric system capable of generating spatially-variant polarized beams has to be used. In particular, this wavefront is manipulated by means of spatial light modulators displaying computer generated holograms and subsequently focused using a high numerical aperture objective lens. Experimental results using a NA=0.85 system are provided: irradiance and Stokes images of the focused field at different planes near the focal plane are presented and compared with those obtained by numerical simulation.

Dynamic range extension of SiPM detectors with the time-gated operation

The silicon photomultiplier (SiPM) is a novel detector technology that has undergone a fast development in the last few years, owing to its single-photon resolution and ultra-fast response time. However, the typical high dark count rates of the sensor may prevent the detection of low intensity radiation fluxes. In this article, the time-gated operation with short active periods in the nanosecond range is proposed as a solution to reduce the number of cells fired due to noise and thus increase the dynamic range. The technique is aimed at application fields that function under a trigger command, such as gated fluorescence lifetime imaging microscopy.

Extension of ultrasound Fourier slice Imaging theory to sectorial acquisition

Ultrasound image reconstruction from the echoes received by an ultrasound probe after the transmission of diverging waves is an active area of research because of its capacity to insonify at ultra-high frame rate with large regions of interest using small phased arrays as the ones used in echocardiography. Current state-of-the-art techniques are based on the emission of diverging waves and the use of delay and sum strategies applied on the received signals to reconstruct the desired image (DW/DAS). Recently, we have introduced the concept of Ultrasound Fourier Slice Imaging (UFSI) theory for the reconstruction of ultrafast imaging for linear acquisition. In this study, we extend this theory to sectorial acquisition thanks to the introduction of an explicit and invertible spatial transform. Starting from a diverging wave, we show that the direct use of UFSI theory along with the application of the proposed spatial transform allows reconstructing the insonified medium in the conventional Cartesian space. Simulations and experiments reveal the capacity of this new approach in obtaining competitive quality of ultrafast imaging when compared with the current reference method.

Extension and evaluation of JXTA protocols for supporting reliable P2P distributed computing

Peer-reviewed

Extension of the impedance field method to the noise analysis of a semiconductor junction: Analytical approach

We present an analytical procedure to perform the local noise analysis of a semiconductor junction when both the drift and diffusive parts of the current are important. The method takes into account space-inhomogeneous and hot-carriers conditions in the framework of the drift-diffusion model, and it can be effectively applied to the local noise analysis of different devices: n+nn+ diodes, Schottky barrier diodes, field-effect transistors, etc., operating under strongly inhomogeneous distributions of the electric field and charge concentration

Extension of the impedance field method to the noise analysis of a semiconductor junction: Analytical approach

We present an analytical procedure to perform the local noise analysis of a semiconductor junction when both the drift and diffusive parts of the current are important. The method takes into account space-inhomogeneous and hot-carriers conditions in the framework of the drift-diffusion model, and it can be effectively applied to the local noise analysis of different devices: n+nn+ diodes, Schottky barrier diodes, field-effect transistors, etc., operating under strongly inhomogeneous distributions of the electric field and charge concentration

Numerical Investigation of Flow Past a Circular Cylinder and in a Staggered Tube Bundle Using Various Turbulence Models

Transitional flow past a three-dimensional circular cylinder is a widely studied phenomenon since this problem is of interest with respect to many technical applications. In the present work, the numerical simulation of flow past a circular cylinder, performed by using a commercial CFD code (ANSYS Fluent 12.1) with large eddy simulation (LES) and RANS (κ - ε and Shear-Stress Transport (SST) κ - ω! model) approaches. The turbulent flow for ReD = 1000 & 3900 is simulated to investigate the force coefficient, Strouhal number, flow separation angle, pressure distribution on cylinder and the complex three dimensional vortex shedding of the cylinder wake region. The numerical results extracted from these simulations have good agreement with the experimental data (Zdravkovich, 1997). Moreover, grid refinement and time-step influence have been examined. Numerical calculations of turbulent cross-flow in a staggered tube bundle continues to attract interest due to its importance in the engineering application as well as the fact that this complex flow represents a challenging problem for CFD. In the present work a time dependent simulation using κ – ε, κ - ω! and SST models are performed in two dimensional for a subcritical flow through a staggered tube bundle. The predicted turbulence statistics (mean and r.m.s velocities) have good agreement with the experimental data (S. Balabani, 1996). Turbulent quantities such as turbulent kinetic energy and dissipation rate are predicted using RANS models and compared with each other. The sensitivity of grid and time-step size have been analyzed. Model constants sensitivity study have been carried out by adopting κ – ε model. It has been observed that model constants are very sensitive to turbulence statistics and turbulent quantities.

Web-Based Extension Studies in Medical Calculation

Nordic forum for nursing teachers. Wednesday - Friday 9-11 November 2011 Ounasvaara Campus School of Heath Care and Sports Rovaniemi University of Applied Sciences

Ferramenta computacional para dimensionamento de silo unicelular de concreto armado – parte I: silo de seção circular

Silos são construções que, em função de sua finalidade de utilização, estão sujeitos a carregamentos peculiares, tais como pressões horizontais e verticais - estáticas ou dinâmicas, dependendo da fase de operação - atrito nas paredes e cargas térmicas, todos causados pela presença do produto armazenado. Com o objetivo de sistematizar os procedimentos necessários para o dimensionamento de silos unicelulares de concreto armado, um programa computacional denominado SILOS foi desenvolvido, sendo composto por dois módulos: Módulo 1, para silos cilíndricos de seção circular e Módulo 2, para silos prismáticos de seção retangular. Neste artigo (Parte I), são apresentados os procedimentos que compõem o Módulo 1. O Módulo 2 será apresentado em artigo subsequente (Parte II). O programa foi desenvolvido na linguagem DELPHI e pode ser utilizado por profissionais e estudantes da área de Construções Rurais, independentemente da familiaridade do usuário com a linguagem computacional empregada.

Alterações morfométricas da musculatura dos músculos longitudinal e circular de ratos submetidos à criação de piloros no intestino delgado

OBJETIVO: Realizar um estudo morfométrico comparativo da musculatura longitudinal e circular do intestino delgado de ratos submetidos à construção cirúrgica de um e de dois piloros no intestino delgado utilizando-se da técnica de criação de piloros proposta por Rena et al. MÉTODO: Foram utilizados 52 ratos Wistar machos divididos em três grupos. O Grupo A, destacado como controle, composto de 10 animas, cada um forneceu 20mm de segmento de intestino para o estudo. Os animais do Grupo B, composto de 32 animais, foram submetidos à construção de dois piloros, um a 100mm e outro a 150mm da válvula ileocecal e os animais do grupo C, composto de 10 animais, foram submetidos à construção de um piloro a 100mm da mesma. A eutanásia ocorreu no décimo dia. A morfometria das camadas musculares longitudinal e circular acima e abaixo dos piloros foi estudada com utilização do microscópico modelo "Axiostar plus" conectado à câmera "Axioncam Version 5.05.10" com objetiva X5 / 0,12 no o programa "AxioVision 3.1.2.1". RESULTADOS: As alças apresentaram aumento da espessura da camada muscular acima e abaixo do ponto da operação. O estudo morfométrico comparativo das camadas musculares longitudinal e circular mostrou aumento significativo em comparação ao controle, não demonstrando significância entre os grupos B e C. CONCLUSÃO: Os resultados deste estudo revelaram importante aumento de espessura das camadas musculares, porém, menos acentuados que aqueles descritos na literatura quando foram realizados em animais submetidos à estenose fixa. Esses dados indicam que a construção operatória de piloros pela técnica utilizada promove alterações musculares de menor monta, possivelmente, pela função valvular do piloro.

Circular Spectropolarimetric Studies of DQ White Dwarfs

This thesis summarizes studies of a class of white dwarfs (WDs) called DQ WDs. White dwarfs are the remnants of ordinary stars like our Sun that have run out of nuclear fuel. WDs are classified according to the composition of their atmosphere and DQ WDs have an atmosphere made of helium and carbon. The carbon comes in either atomic or molecular form and in some cases the strong spectral absorption features cover the entire optical wavelength region. The research presented here utilizes spectropolarimetry, which is an observational technique that combines spectroscopy and polarization. Separately these allow to study the composition of a target and the inhomogeneous distribution of matter in the target. Put together they form a powerful tool to probe the physical properties in the atmosphere of a star. It is espacially good for detecting magnetic fields. The papers in this thesis describe efforts to do a survey of DQ white dwarfs with spectropolarimetry in order to search for magnetic fields in them. Paper I describes the discovery of a new magnetic cool DQ white dwarf, GJ841B. Initial modeling of molecular features on DQ WDs showed inconsistencies with observations. The first possible solution to this problem was stellar spots on these WDs. To investigate the matter, two DQ WDs were monitored for photometric variability that could arise from the presence of such spots. Paper II summarizes this short campaign and reports the negative results. Paper III reports observations of the rest of the objects in our survey. The paper includes the discovery of polarization from another cool DQ white dwarf, bringing the total of known magnetic cool DQs to three. Unfortunately the model used in this thesis cannot, in its present state, be used to model these objects nor are the observations of high enough spectroscopic resolution to do so.