Hydroelastic impacts of deformable wedges

This work investigates the slamming phenomenon experienced during the water entry of deformable bodies. Wedges are chosen as reference geometry due to their similarity to a generic hull section. Hull slamming is a phenomenon occurring when a ship re-enters the water after having been partially or completely lifted out the water. While the analysis of rigid structures entering the water has been extensively studied in the past and there are analytical solutions capable of correctly predicting the hydrodynamic pressure distribution and the overall impact dynamics, the effect of the structural deformation on the structural force is still a challenging problem to be solved. In fact, in case of water impact of deformable bodies, the dynamic deflection could interact with the fluid flow, changing the hydrodynamic load. This work investigates the hull-slamming problem by experiments and numerical simulations of the water entry of elastic wedges impacting on an initially calm surface. The effect of asymmetry due to horizontal velocity component or initial tilt angle on the impact dynamics is also studied. The objective of this work is to determine an accurate model to predict the overall dynamics of the wedge and its deformations. More than 1200 experiments were conducted by varying wedge structural stiffness, deadrise angle, impact velocity and mass. On interest are the overall impact dynamics and the local structural deformation of the panels composing the wedge. Alongside with the experimental analysis, numerical simulations based on a coupled Smoothed Particle Hydrodynamics (SPH) and FEM method are developed. The experimental results provide evidence of the mutual interaction between hydrodynamic load and structural deformation. It is found a simple criterion for the onset of fluid structure interaction (FSI), giving reliable information on the cases where FSI should been taken into account.

Analisi sperimentale dell'influenza dei parametri di processo sulla resistenza di contatto tra polimero e stampo durante la formatura

Con gli strumenti informatici disponibili oggi per le industrie, in particolar modo coi software CAE, le possibile simulare in maniera più che soddisfacente i fenomeni fisici presenti in natura. Anche il raffreddamento di un manufatto in polimero può venire simulato, a patto che si conoscano tutti i dati dei materiali e delle condizioni al contorno. Per quanto riguarda i dati dei materiali, i produttori di polimeri sono molto spesso in grado di fornirli, mentre le condizioni al contorno devono essere padroneggiate dal detentore della tecnologia. Nella pratica, tale conoscenza è al più incompleta, quindi si fanno ipotesi per colmare le lacune. Una tra le ipotesi più forti fatte è quella di una perfetta conduzione all'interfaccia tra due corpi. Questo è un vincolo troppo forte, se paragonato alla precisione di tutti gli altri dati necessari alla simulazione, e quindi si è deciso di eseguire una campagna sperimentale per stimare la resistenza al passaggio flusso termico all'interfaccia polimero-stampo ovvero determinare la conduttanza termica di contatto. L'attività svolta in questa tesi di dottorato ha come scopo quello di fornire un contributo significativo allo sviluppo e al miglioramento dell'efficienza termica degli stampi di formatura dei polimeri termoplastici con tecnologia a compressione.

Essays in Behavioral Personnel Economics

The thesis contemplates 4 papers and its main goal is to provide evidence on the prominent impact that behavioral analysis can play into the personnel economics domain.The research tool prevalently used in the thesis is the experimental analysis.The first paper provide laboratory evidence on how the standard screening model–based on the assumption that the pecuniary dimension represents the main workers’choice variable–fails when intrinsic motivation is introduced into the analysis.The second paper explores workers’ behavioral reactions when dealing with supervisors that may incur in errors in the assessment of their job performance.In particular,deserving agents that have exerted high effort may not be rewarded(Type-I errors)and undeserving agents that have exerted low effort may be rewarded(Type-II errors).Although a standard neoclassical model predicts both errors to be equally detrimental for effort provision,this prediction fails when tested through a laboratory experiment.Findings from this study suggest how failing to reward deserving agents is significantly more detrimental than rewarding undeserving agents.The third paper investigates the performance of two antithetic non-monetary incentive schemes on schooling achievement.The study is conducted through a field experiment.Students randomized to the main treatments have been incentivized to cooperate or to compete in order to earn additional exam points.Consistently with the theoretical model proposed in the paper,the level of effort in the competitive scheme proved to be higher than in the cooperative setting.Interestingly however,this result is characterized by a strong gender effect.The fourth paper exploits a natural experiment setting generated by the credit crunch occurred in the UK in the2007.The economic turmoil has negatively influenced the private sector,while public sector employees have not been directly hit by the crisis.This shock–through the rise of the unemployment rate and the increasing labor market uncertainty–has generated an exogenous variation in the opportunity cost of maternity leave in private sector labor force.This paper identifies the different responses.

Composite materials design, manufacture and evaluation

Fibre-Reinforced-Plastics are composite materials composed by thin fibres with high mechanical properties, made to work together with a cohesive plastic matrix. The huge advantages of fibre reinforced plastics over traditional materials are their high specific mechanical properties i.e. high stiffness and strength to weight ratios. This kind of composite materials is the most disruptive innovation in the structural materials field seen in recent years and the areas of potential application are still many. However, there are few aspects which limit their growth: on the one hand the information available about their properties and long term behaviour is still scarce, especially if compared with traditional materials for which there has been developed an extended database through years of use and research. On the other hand, the technologies of production are still not as developed as the ones available to form plastics, metals and other traditional materials. A third aspect is that the new properties presented by these materials e.g. their anisotropy, difficult the design of components. This thesis will provide several case-studies with advancements regarding the three limitations mentioned. In particular, the long term mechanical properties have been studied through an experimental analysis of the impact of seawater on GFRP. Regarding production methods, the pre-impregnated cured in autoclave process was considered: a rapid tooling method to produce moulds will be presented, and a study about the production of thick components. Also, two liquid composite moulding methods will be presented, with a case-study regarding a large component with sandwich structure that was produced with the Vacuum-Assisted-Resin-Infusion method, and a case-study regarding a thick con-rod beam that was produced with the Resin-Transfer-Moulding process. The final case-study will analyse the loads acting during the use of a particular sportive component, made with FRP layers and a sandwich structure, practical design rules will be provided.

Untersuchungen zum Austausch von Stickstoffdioxid (NO 2) zwischen Pflanzen und Atmosphäre

Der Austausch der NO2-Konzentration zwischen der Atmosphäre und verschiedenen Bäumen (Betula pendula, Fagus sylvatica, Quercus robur, Quercus ilex und Pinus sylvestris) wurde mit einer Dynamischen Küvette gemessen. Die NO2-Konzentrationen wurden mit einem CLD 780 TR Analysator in Verbindung mit einem PLC 762 gemessen. Die experimentellen Untersuchungen wurden im Dunkeln und unter zwei Lichtintensitäts-Niveaus (PAR, 450 und 900 µmol m-2 s-1) und sechs verschiedene NO2-Konzentrationen zwischen 0 - 5.0 ppb durchgeführt. Der stomatäre Einfluss wurde unter Einsatz des Hormons Abscisinsäure untersucht. Die Umgebungsparameter (Lufttemperatur und Luftfeuchtigkeit) wurden konstant gehalten. Die Daten zeigten klar und deutlich den dominanten Einfluss der jeweiligen Baumspezies auf die NO2-Konzentrationen innerhalb der Küvette. Die Ergebnisse dieser Arbeit belegen bei allen Spezies eine lineare Abhängigkeit der NO2-Austauschrate mit der NO2-Umgebungskozentration und mit der stomatären Leitfähigkeit. Das Vorhandensein eines Kompensationspunkt wird nicht bestätigt.

Caratterizzazione avanzata in laboratorio di materie prime secondarie rigenerate o stabilizzate con emulsione di bitume e leganti cementizi

Il recupero dei materiali di scarto è un aspetto di grande attualità in campo stradale, così come negli altri ambiti dell’ingegneria civile. L’attenzione della ricerca e degli esperti del settore è rivolta all’affinamento di tecniche di riciclaggio che riducano l’impatto ambientale senza compromettere le prestazioni meccaniche finali. Tali indagini cercano di far corrispondere le necessità di smaltimento dei rifiuti con quelle dell’industria infrastrutturale, legate al reperimento di materiali da costruzione tecnicamente idonei ed economicamente vantaggiosi. Attualmente sono già diversi i tipi di prodotti rigenerati e riutilizzati nella realizzazione delle pavimentazioni stradali e numerosi sono anche quelli di nuova introduzione in fase di sperimentazione. In particolare, accanto ai materiali derivanti dalle operazioni di recupero della rete viaria, è opportuno considerare anche quelli provenienti dall’esercizio delle attività di trasporto, il quale comporta ogni anno il raggiungimento della fine della vita utile per centinaia di migliaia di tonnellate di pneumatici di gomma. L’obiettivo della presente analisi sperimentale è quello di fornire indicazioni e informazioni in merito alla tecnica di riciclaggio a freddo con emulsione bituminosa e cemento, valutando la possibilità di applicazione di tale metodologia in combinazione con il polverino di gomma, ottenuto dal recupero degli pneumatici fuori uso (PFU). La ricerca si distingue per una duplice valenza: la prima è quella di promuovere ulteriormente la tecnica di riciclaggio a freddo, che si sta imponendo per i suoi numerosi vantaggi economici ed ambientali, legati soprattutto alla temperatura d’esercizio; la seconda è quella di sperimentare l’utilizzo del polverino di gomma, nelle due forme di granulazione tradizionale e criogenica, additivato a miscele costituite interamente da materiale proveniente da scarifica di pavimentazioni esistenti e stabilizzate con diverse percentuali di emulsione di bitume e di legante cementizio.

Networks, Uncertainty, Applications and a Crusade for Optimality

In this thesis we address a collection of Network Design problems which are strongly motivated by applications from Telecommunications, Logistics and Bioinformatics. In most cases we justify the need of taking into account uncertainty in some of the problem parameters, and different Robust optimization models are used to hedge against it. Mixed integer linear programming formulations along with sophisticated algorithmic frameworks are designed, implemented and rigorously assessed for the majority of the studied problems. The obtained results yield the following observations: (i) relevant real problems can be effectively represented as (discrete) optimization problems within the framework of network design; (ii) uncertainty can be appropriately incorporated into the decision process if a suitable robust optimization model is considered; (iii) optimal, or nearly optimal, solutions can be obtained for large instances if a tailored algorithm, that exploits the structure of the problem, is designed; (iv) a systematic and rigorous experimental analysis allows to understand both, the characteristics of the obtained (robust) solutions and the behavior of the proposed algorithm.

Tetti verdi: Analisi sperimentale e Modellazione numerica

I tetti verdi rappresentano, sempre più frequentemente, una tecnologia idonea alla mitigazione alle problematiche connesse all’ urbanizzazione, tuttavia la conoscenza delle prestazioni dei GR estensivi in clima sub-Mediterraneo è ancora limitata. La presente ricerca è supportata da 15 mesi di analisi sperimentali su due GR situati presso la Scuola di Ingegneria di Bologna. Inizialmente vengono comparate, tra loro e rispetto a una superficie di riferimento (RR), le prestazioni idrologiche ed energetiche dei due GR, caratterizzati da vegetazione a Sedum (SR) e a erbe native perenni (NR). Entrambi riducono i volumi defluiti e le temperature superficiali. Il NR si dimostra migliore del SR sia in campo idrologico che termico, la fisiologia della vegetazione del NR determina l'apertura diurna degli stomi e conseguentemente una maggiore evapotraspirazione (ET). Successivamente si sono studiate la variazioni giornaliere di umidità nel substrato del SR riscontrando che la loro ampiezza è influenzata dalla temperatura, dall’umidità iniziale e dalla fase vegetativa. Queste sono state simulate mediante un modello idrologico basato sull'equazione di bilancio idrico e su due modelli convenzionali per la stima della ET potenziale combinati con una funzione di estrazione dell’ umidità dal suolo. Sono stati proposti dei coefficienti di correzione, ottenuti per calibrazione, per considerare le differenze tra la coltura di riferimento e le colture nei GR durante le fasi di crescita. Infine, con l’ausilio di un modello implementato in SWMM 5.1. 007 utilizzando il modulo Low Impact Development (LID) durante simulazioni in continuo (12 mesi) si sono valutate le prestazioni in termini di ritenzione dei plot SR e RR. Il modello, calibrato e validato, mostra di essere in grado di riprodurre in modo soddisfacente i volumi defluiti dai due plot. Il modello, a seguito di una dettagliata calibrazione, potrebbe supportare Ingegneri e Amministrazioni nella valutazioni dei vantaggi derivanti dall'utilizzo dei GR.

The interface between morphology and action planning: a comparison of two species of New World monkeys

Recent research with several species of nonhuman primates suggests sophisticated motor-planning abilities observed in human adults may be ubiquitous among primates. However, there is considerable variability in the extent to which these abilities are expressed across primate species. In the present experiment, we explore whether the variability in the expression of anticipatory motor-planning abilities may be attributed to cognitive differences (such as tool use abilities) or whether they may be due to the consequences of morphological differences (such as being able to deploy a precision grasp). We compared two species of New World monkeys that differ in their tool use abilities and manual dexterity: squirrel monkeys, Saimiri sciureus (less dexterous with little evidence for tool use) and tufted capuchins, Sapajus apella (more dexterous and known tool users). The monkeys were presented with baited cups in an untrained food extraction task. Consistent with the morphological constraint hypothesis, squirrel monkeys frequently showed second-order motor planning by inverting their grasp when picking up an inverted cup, while capuchins frequently deployed canonical upright grasping postures. Findings suggest that the lack of ability for precision grasping may elicit more consistent second-order motor planning, as the squirrel monkeys (and other species that have shown a high rate of second-order planning) have fewer means of compensating for inefficient initial postures. Thus, the interface between morphology and motor planning likely represents an important factor for understanding both the ontogenetic and phylogenetic origins of sophisticated motor-planning abilities.

Witnessing reconciliation reduces arousal of bystanders in a baboon group (Papio hamadryas hamadryas)

Reconciliation is the occurrence of friendly behaviour between opponents shortly after an aggressive conflict. In primate groups, reconciliation reduces aggression and post-conflict arousal. Aggression within a group can also increase arousal of bystanders (e.g. increase bystanders’ rates of self-directed behaviour). Since reconciliation reduces aggression between opponents, we tested whether it also reduces self-directed behaviour in bystanders. Following aggression in a captive group of hamadryas baboons, one observer conducted a focal sample on one of the combatants to document reconciliation and a second observer simultaneously conducted a focal sample on a randomly selected bystander. Matched control observations were then collected on the same individuals in a nonaggressive context to obtain baseline levels of behaviour. The self-directed behaviour of bystanders was elevated after witnessing a fight compared to baseline levels. If combatants reconciled aggression, bystander rates of self-directed behaviour significantly decreased. If combatants did not reconcile aggression, bystander rates of self-directed behaviour remained at elevated levels, significantly higher than after reconciliation. If combatants affiliated with partners other than their original opponent, bystander rates of self-directed behaviour did not decrease. The rate of bystander self-directed behaviour after a combatant affiliated with its opponent was significantly lower than the rate after a combatant affiliated with other animals. Witnessing aggression increased arousal in bystanders, and reconciliation between the combatants was accompanied by reduced bystander arousal. The reduction was specific to contexts in which former opponents interacted. We suggest that bystanders recognized the functional significance of this conflict resolution mechanism when it occurred in their group.

Capuchin Monkeys Exercise Self-control by Choosing Token Exchange Over an Immediate Reward

Self-control is a prerequisite for complex cognitive processes such as cooperation and planning. As such, comparative studies of self-control may help elucidate the evolutionary origin of these capacities. A variety of methods have been developed to test for self-control in non-human primates that include some variation of foregoing an immediate reward in order to gain a more favorable reward. We used a token exchange paradigm to test for self-control in capuchin monkeys (Cebus apella). Animals were trained that particular tokens could be exchanged for food items worth different values. To test for self-control, a monkey was provided with a token that was associated with a lower-value food. When the monkey exchanged the token, the experimenter provided the monkey with a choice between the lower-value food item associated with the token or another token that was associated with a higher-value food. If the monkey chose the token, they could then exchange it for the higher-value food. Of seven monkeys trained to exchange tokens, five demonstrated that they attributed value to the tokens by differentially selecting tokens for higher-value foods over tokens for lower-value foods. When provided with a choice between a food item or a token for a higher-value food, two monkeys selected the token significantly more than expected by chance. The ability of capuchin monkeys to forego an immediate food reward and select a token that could then be traded for a more preferred food demonstrated some degree of self-control. Thus, results suggest a token exchange paradigm could be a successful technique for assessing self-control in this New World species.

Risk Judgment in Obsessive-Compulsive Disorder: Testing a Dual-Systems Account

Dual-systems theorists posit distinct modes of reasoning. The intuition system reasons automatically and its processes are unavailable to conscious introspection. The deliberation system reasons effortfully while its processes recruit working memory. The current paper extends the application of such theories to the study of Obsessive-Compulsive Disorder (OCD). Patients with OCD often retain insight into their irrationality, implying dissociable systems of thought: intuition produces obsessions and fears that deliberation observes and attempts (vainly) to inhibit. To test the notion that dual-systems theory can adequately describe OCD, we obtained speeded and unspeeded risk judgments from OCD patients and non-anxious controls in order to quantify the differential effects of intuitive and deliberative reasoning. As predicted, patients deemed negative events to be more likely than controls. Patients also took more time in producing judgments than controls. Furthermore, when forced to respond quickly patients' judgments were more affected than controls'. Although patients did attenuate judgments when given additional time, their estimates never reached the levels of controls'. We infer from these data that patients have genuine difficulty inhibiting their intuitive cognitive system. Our dual-systems perspective is compatible with current theories of the disorder. Similar behavioral tests may prove helpful in better understanding related anxiety disorders. (C) 2013 Elsevier Ltd. All rights reserved.

Friendship as a Relationship Infiltration Tactic during Human Mate Poaching

Previous research has characterized human mate poaching as a prevalent alternative mating strategy that entails risks and costs typically not present during general romantic courtship and attraction. This study is the first to experimentally investigate friendship between a poacher and his/her target as a risk mitigation tactic. Participants (N = 382) read a vignette that differed by whether the poacher was male/female and whether the poacher and poached were friends/acquaintances. Participants assessed the likelihood of the poacher being successful and incurring costs. They also rated the poacher and poached on several personality and mate characteristics. Results revealed that friendship increased the perceived likelihood of success of a mate poaching attempt and decreased the perceived likelihood of several risks typically associated with mate poaching. However, friend-poachers were rated less favorably than acquaintance-poachers across measures of warmth, nurturance, and friendliness. These findings are interpreted using an evolutionary perspective. This study complements and builds upon previous findings and is the first experimental investigation of tactics poachers may use to mitigate risks inherent in mate poaching.

Feature Versus Spatial Strategies by Orangutans (Pongo abelii) and Human Children (Homo sapiens) in a Cross-Dimensional Task

Despite the fact that photographic stimuli are used across experimental contexts with both human and nonhuman subjects, the nature of individuals' perceptions of these stimuli is still not well understood. In the present experiments, we tested whether three orangutans and 36 human children could use photographic information presented on a computer screen to solve a perceptually corresponding problem in the physical domain. Furthermore, we tested the cues that aided in this process by pitting featural information against spatial position in a series of probe trials. We found that many of the children and one orangutan were successfully able to use the information cross-dimensionally; however, the other two orangutans and almost a quarter of the children failed to acquire the task. Species differences emerged with respect to ease of task acquisition. More striking, however, were the differences in cues that participants used to solve the task: Whereas the orangutan used a spatial strategy, the majority of children used a feature one. Possible reasons for these differences are discussed from both evolutionary and developmental perspectives. The novel results found here underscore the need for further testing in this area to design appropriate experimental paradigms in future comparative research settings.

Effect of mesh distortion on the accuracy of high order vorticity-velocity CFD approaches

The numerical solution of the incompressible Navier-Stokes equations offers an alternative to experimental analysis of fluid-structure interaction (FSI). We would save a lot of time and effort and help cut back on costs, if we are able to accurately model systems by these numerical solutions. These advantages are even more obvious when considering huge structures like bridges, high rise buildings or even wind turbine blades with diameters as large as 200 meters. The modeling of such processes, however, involves complex multiphysics problems along with complex geometries. This thesis focuses on a novel vorticity-velocity formulation called the Kinematic Laplacian Equation (KLE) to solve the incompressible Navier-stokes equations for such FSI problems. This scheme allows for the implementation of robust adaptive ordinary differential equations (ODE) time integration schemes, allowing us to tackle each problem as a separate module. The current algortihm for the KLE uses an unstructured quadrilateral mesh, formed by dividing each triangle of an unstructured triangular mesh into three quadrilaterals for spatial discretization. This research deals with determining a suitable measure of mesh quality based on the physics of the problems being tackled. This is followed by exploring methods to improve the quality of quadrilateral elements obtained from the triangles and thereby improving the overall mesh quality. A series of numerical experiments were designed and conducted for this purpose and the results obtained were tested on different geometries with varying degrees of mesh density.