Ohutlevyn taivuttaminen pienerätuotannossa

Tutkimuksessa on selvitetty ohutlevyn taivuttamismenetelmien tärkeimmät kustannustekijät ja menetelmien taloudelliset käyttöalueet. Vertailtavina menetelminä on käsinsärmäys, robotisoitu särmäys, taivutusautomaatti ja taivutuskone. Tulosta on sovellettu Hackman Metos Oy:n keittiölaitteiden tuotantoon. Tutkimusmenetelminä oli haastattelututkimus, kirjallisuustutkimus, työntutkimustulosten käyttö, ryhmäteknologian soveltaminen ja kokeellinen tutkimus. Särmäysrobotin tärkein kustannustekijä on ohjelmointiaika, mikä vaikuttaa ratkaisevasti sen soveltuvuuteen pienerätuotantoon. Nykyisten särmäyssolujen taloudellinen käyttöalue on tuhansien kappaleiden vuosivolyymi satojen kappaleiden eräkoolla. taivutusautomaatin ohjelmointi- ja asetusajat ovat erittäin lyhyet ja sen tärkein kustannustekijä on käyttöaste. Mikäli käyttöaste on korkea, taivutusautomaatti on kannattava pienerätuotannossa pienille vuosivolyymeille. Taivutusautomaatin käyttöönotossa tuotteiden suunnittelu on tärkeä tekijä, sillä särmättäväksi suunnitellut osat eivät välttämättä sovellu taivutusautomaatilla taivutettavaksi. Taivutuskoneen investointikustannus on alhaisempi kuin särmäyspuristimen, mutta sillä on paljon tuotteen valmistettavuuden liittyviä rajoituksia. Taivutuskone on kannattava investointi, mikäli tuotannossa on paljon levyjä, joiden taivutukset ovat samaan suuntaan ja ne vaativat kaksi särmääjää. Tutkimuksen perusteella Hackman Metso Oy:ssä teknis-taloudellisin taivutusmenetelmä on käsinsärmäys. Tuotannon kasvaessa taivutusautomaatti tulee olemaan särmäysrobottia edullisempi. Taivutuskoneella on niin paljon valmistettavuusrajoituksia, että se ei sovellu yrityksen tuotantoon.

Intrinsic ROS-production capacity of nanoparticles

Engineered nanomaterials (ENMs) exhibit special physicochemical properties and thus are finding their way into an increasing number of industries, enabling products with improved properties. Their increased use brings a greater likelihood of exposure to the nanoparticles (NPs) that could be released during the life cycle of nano-abled products. The field of nanotoxicology has emerged as a consequence of the development of these novel materials, and it has gained ever more attention due to the urgent need to gather information on exposure to them and to understand the potential hazards they engender. However, current studies on nanotoxicity tend to focus on pristine ENMs, and they use these toxicity results to generalize risk assessments on human exposure to NPs. ENMs released into the environment can interact with their surroundings, change characteristics and exhibit toxicity effects distinct from those of pristine ENMs. Furthermore, NPs' large surface areas provide extra-large potential interfaces, thus promoting more significant interactions between NPs and other co-existing species. In such processes, other species can attach to a NP's surface and modify its surface functionality, in addition to the toxicity in normally exhibits. One particular occupational health scenario involves NPs and low-volatile organic compounds (LVOC), a common type of pollutant existing around many potential sources of NPs. LVOC can coat a NP's surface and then dominate its toxicity. One important mechanism in nanotoxicology is the creation of reactive oxygen species (ROS) on a NP's surface; LVOC can modify the production of these ROS. In summary, nanotoxicity research should not be limited to the toxicity of pristine NPs, nor use their toxicity to evaluate the health effects of exposure to environmental NPs. Instead, the interactions which NPs have with other environmental species should also be considered and researched. The potential health effects of exposure to NPs should be derived from these real world NPs with characteristics modified by the environment and their distinct toxicity. Failure to suitably address toxicity results could lead to an inappropriate treatment of nano- release, affect the environment and public health and put a blemish on the development of sustainable nanotechnologies as a whole. The main objective of this thesis is to demonstrate a process for coating NP surfaces with LVOC using a well-controlled laboratory design and, with regard to these NPs' capacity to generate ROS, explore the consequences of changing particle toxicity. The dynamic coating system developed yielded stable and replicable coating performance, simulating an important realistic scenario. Clear changes in the size distribution of airborne NPs were observed using a scanning mobility particle sizer, were confirmed using both liquid nanotracking analyses and transmission electron microscopy (TEM) imaging, and were verified thanks to the LVOC coating. Coating thicknesses corresponded to the amount of coating material used and were controlled using the parameters of the LVOC generator. The capacity of pristine silver NPs (Ag NPs) to generate ROS was reduced when they were given a passive coating of inert paraffin: this coating blocked the reactive zones on the particle surfaces. In contrast, a coating of active reduced-anthraquinone contributed to redox reactions and generated ROS itself, despite the fact that ROS generation due to oxidation by Ag NPs themselves was quenched. Further objectives of this thesis included development of ROS methodology and the analysis of ROS case studies. Since the capacity of NPs to create ROS is an important effect in nanotoxicity, we attempted to refine and standardize the use of 2'7-dichlorodihydrofluorescin (DCFH) as a chemical tailored for the characterization of NPs' capacity for ROS generation. Previous studies had reported a wide variety of results, which were due to a number of insufficiently well controlled factors. We therefore cross-compared chemicals and concentrations, explored ways of dispersing NP samples in liquid solutions, identified sources of contradictions in the literature and investigated ways of reducing artificial results. The most robust results were obtained by sonicating an optimal sample of NPs in a DCFH-HRP solution made of 5,M DCFH and 0.5 unit/ml horseradish peroxidase (HRP). Our findings explained how the major reasons for previously conflicting results were the different experimental approaches used and the potential artifacts appearing when using high sample concentrations. Applying our advanced DCFH protocol with other physicochemical characterizations and biological analyses, we conducted several case studies, characterizing aerosols and NP samples. Exposure to aged brake wear dust engenders a risk of potential deleterious health effects in occupational scenarios. We performed microscopy and elemental analyses, as well as ROS measurements, with acellular and cellular DCFH assays. TEM images revealed samples to be heterogeneous mixtures with few particles in the nano-scale. Metallic and non-metallic elements were identified, primarily iron, carbon and oxygen. Moderate amounts of ROS were detected in the cell-free fluorescent tests; however, exposed cells were not dramatically activated. In addition to their highly aged state due to oxidation, the reason aged brake wear samples caused less oxidative stress than fresh brake wear samples may be because of their larger size and thus smaller relative reactive surface area. Other case studies involving welding fumes and differently charged NPs confirmed the performance of our DCFH assay and found ROS generation linked to varying characteristics, especially the surface functionality of the samples. Les nanomatériaux manufacturés (ENM) présentent des propriétés physico-chimiques particulières et ont donc trouvés des applications dans un nombre croissant de secteurs, permettant de réaliser des produits ayant des propriétés améliorées. Leur utilisation accrue engendre un plus grand risque pour les êtres humains d'être exposés à des nanoparticules (NP) qui sont libérées au long de leur cycle de vie. En conséquence, la nanotoxicologie a émergé et gagné de plus en plus d'attention dû à la nécessité de recueillir les renseignements nécessaires sur l'exposition et les risques associés à ces nouveaux matériaux. Cependant, les études actuelles sur la nanotoxicité ont tendance à se concentrer sur les ENM et utiliser ces résultats toxicologiques pour généraliser l'évaluation des risques sur l'exposition humaine aux NP. Les ENM libérés dans l'environnement peuvent interagir avec l'environnement, changeant leurs caractéristiques, et montrer des effets de toxicité distincts par rapport aux ENM originaux. Par ailleurs, la grande surface des NP fournit une grande interface avec l'extérieur, favorisant les interactions entre les NP et les autres espèces présentes. Dans ce processus, d'autres espèces peuvent s'attacher à la surface des NP et modifier leur fonctionnalité de surface ainsi que leur toxicité. Un scénario d'exposition professionnel particulier implique à la fois des NP et des composés organiques peu volatils (LVOC), un type commun de polluant associé à de nombreuses sources de NP. Les LVOC peuvent se déposer sur la surface des NP et donc dominer la toxicité globale de la particule. Un mécanisme important en nanotoxicologie est la création d'espèces réactives d'oxygène (ROS) sur la surface des particules, et les LVOC peuvent modifier cette production de ROS. En résumé, la recherche en nanotoxicité ne devrait pas être limitée à la toxicité des ENM originaux, ni utiliser leur toxicité pour évaluer les effets sur la santé de l'exposition aux NP de l'environnement; mais les interactions que les NP ont avec d'autres espèces environnementales doivent être envisagées et étudiées. Les effets possibles sur la santé de l'exposition aux NP devraient être dérivés de ces NP aux caractéristiques modifiées et à la toxicité distincte. L'utilisation de résultats de toxicité inappropriés peut conduire à une mauvaise prise en charge de l'exposition aux NP, de détériorer l'environnement et la santé publique et d'entraver le développement durable des industries de la nanotechnologie dans leur ensemble. L'objectif principal de cette thèse est de démontrer le processus de déposition des LVOC sur la surface des NP en utilisant un environnement de laboratoire bien contrôlé et d'explorer les conséquences du changement de toxicité des particules sur leur capacité à générer des ROS. Le système de déposition dynamique développé a abouti à des performances de revêtement stables et reproductibles, en simulant des scénarios réalistes importants. Des changements clairs dans la distribution de taille des NP en suspension ont été observés par spectrométrie de mobilité électrique des particules, confirmé à la fois par la méthode dite liquid nanotracking analysis et par microscopie électronique à transmission (MET), et a été vérifié comme provenant du revêtement par LVOC. La correspondance entre l'épaisseur de revêtement et la quantité de matériau de revêtement disponible a été démontré et a pu être contrôlé par les paramètres du générateur de LVOC. La génération de ROS dû aux NP d'argent (Ag NP) a été diminuée par un revêtement passif de paraffine inerte bloquant les zones réactives à la surface des particules. Au contraire, le revêtement actif d'anthraquinone réduit a contribué aux réactions redox et a généré des ROS, même lorsque la production de ROS par oxydation des Ag NP avec l'oxygène a été désactivé. Les objectifs associés comprennent le développement de la méthodologie et des études de cas spécifique aux ROS. Etant donné que la capacité des NP à générer des ROS contribue grandement à la nanotoxicité, nous avons tenté de définir un standard pour l'utilisation de 27- dichlorodihydrofluorescine (DCFH) adapté pour caractériser la génération de ROS par les NP. Des etudes antérieures ont rapporté une grande variété de résultats différents, ce qui était dû à un contrôle insuffisant des plusieurs facteurs. Nous avons donc comparé les produits chimiques et les concentrations utilisés, exploré les moyens de dispersion des échantillons HP en solution liquide, investigué les sources de conflits identifiées dans les littératures et étudié les moyens de réduire les résultats artificiels. De très bon résultats ont été obtenus par sonication d'une quantité optimale d'échantillons de NP en solution dans du DCFH-HRP, fait de 5 nM de DCFH et de 0,5 unité/ml de Peroxydase de raifort (HRP). Notre étude a démontré que les principales raisons causant les conflits entre les études précédemment conduites dans la littérature étaient dues aux différentes approches expérimentales et à des artefacts potentiels dus à des concentrations élevées de NP dans les échantillons. Utilisant notre protocole DCFH avancé avec d'autres caractérisations physico-chimiques et analyses biologiques, nous avons mené plusieurs études de cas, caractérisant les échantillons d'aérosols et les NP. La vielle poussière de frein en particulier présente un risque élevé d'exposition dans les scénarios professionnels, avec des effets potentiels néfastes sur la santé. Nous avons effectué des analyses d'éléments et de microscopie ainsi que la mesure de ROS avec DCFH cellulaire et acellulaire. Les résultats de MET ont révélé que les échantillons se présentent sous la forme de mélanges de particules hétérogènes, desquels une faible proportion se trouve dans l'échelle nano. Des éléments métalliques et non métalliques ont été identifiés, principalement du fer, du carbone et de l'oxygène. Une quantité modérée de ROS a été détectée dans le test fluorescent acellulaire; cependant les cellules exposées n'ont pas été très fortement activées. La raison pour laquelle les échantillons de vielle poussière de frein causent un stress oxydatif inférieur par rapport à la poussière de frein nouvelle peut-être à cause de leur plus grande taille engendrant une surface réactive proportionnellement plus petite, ainsi que leur état d'oxydation avancé diminuant la réactivité. D'autres études de cas sur les fumées de soudage et sur des NP différemment chargées ont confirmé la performance de notre test DCFH et ont trouvé que la génération de ROS est liée à certaines caractéristiques, notamment la fonctionnalité de surface des échantillons.

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

Maladie de Whipple: quand y penser [Whipple's disease, when to think about it?].

Whipple's disease is a chronic, systemic, bacterial infection caused by Tropheryma whipplei. Its cardinal symptoms include intermittent and recurrent arthralgia or arthritis together with chronic diarrhoea, abdominal pain and weight loss. It may mimick many chronic inflammatory diseases, and the diagnosis remains a challenge. Salivary and faecal quantitative PCR for T. whipplei should be ensued, if positive, by an upper endoscopy for duodenal biopsies. The treatment consists of a combination of oral doxycycline and hydroxychloroquine for 12 months followed by life-long doxycycline. Whipple's disease, although rare, is an entity that should be considered regularly, as its progression may be fatal if left untreated.

Särmäyksen kustannusperusteinen hinnoittelu

Tässä diplomityössä on tutkittu särmäyksen eri muuttujien vaikutusta kustannusrakenteeseen. Tutkimusmenetelminä on käytetty kirjallisuusselvitystä sekä särmäysaikojen mittausta tuotannossa. Diplomityön tavoitteena oli saada aikaan kustannusperusteinen hinnoittelumalli, jonka avulla särmäyksen hinnoittelu on yksinkertaista ja nopeaa. Särmäysaikoja mitattiin erikokoisille ja -muotoisille kappaleille. Levyn paksuus mitattavilla kappaleilla oli alle 1mm. Muut mitat vaihtelivat alle 200 mm:stä yli 2000 mm:iin. Käytetyt materiaalit olivat sähkö- ja kuumasinkitty teräs. Mitattavia aikoja olivat aika, joka kuluu yhden särmän taivutukseen, aika, joka kuluu yhden kappaleen valmistamiseen sekä ohjelmointiin ja asetuksiin kuluva aika. Särmäysaikoihin vaikuttavat kymmenet eri muuttujat liittyen särmäyspuristimiin, särmättäviin kappaleisiin ja työkaluihin, jne. Osa muuttujista vaikuttaa hyvin vähän kokonaisaikaan, joten kaikkia muuttujia ei lähdetty mittaamaan erikseen. Lisäksi käytössä ollut mittausvälineistö ei ollut riittävän tarkka kaikkien muuttujien mittaamiseen. Aikaansaatu hinnoittelumalli huomioi eri muuttujat ajassa, joka kuluu kappaleiden valmistamiseen, jolloin kaikki muuttujat tulee huomioitua lopullisessa hinnassa.

Product costing model for laser welded hollow core steel panels

The aim of the study was to create an easily upgradable product costing model for laser welded hollow core steel panels to help in pricing decisions. The theory section includes a literature review to identify traditional and modern cost accounting methodologies, which are used by manufacturing companies. The theory section also presents the basics of steel panel structures and their manufacturing methods and manufacturing costs based on previous research. Activity-Based costing turned out to be the most appropriate methodology for the costing model because of wide product variations. Activity analysis and the determination of cost drivers based on observations and interviews were the key steps in the creation of the model. The created model was used to test how panel parameters affect the costs caused by the main manufacturing stages and materials. By comparing cost structures, it was possible to find the panel types that are the most economic and uneconomic to manufacture. A sensitivity analysis proved that the model gives sufficiently reliable cost information to support pricing decisions. More reliable cost information could be achieved by determining the cost drivers more accurately. Alternative methods for manufacturing the cores were compared with the model. The comparison proved that roll forming can be more advantageous and flexible than press brake bending. However, more extensive research showed that roll forming is possible only when the cores are designed to be manufactured by roll forming. Due to that fact, when new panels are designed consideration should be given to the possibility of using roll forming.

Natural history of celiac disease-associated antibodies and progression to overt disease in children at increased genetic risk

Background: Celiac disease is a lifelong, gluten-sensitive, autoimmune-mediated chronic enteropathy, tightly associated with risk alleles at the HLA class II genes. Aims: This study was carried out as a part of the population-based Type 1 Diabetes Prediction and Prevention (DIPP) Project. The first aim was to study the natural history of celiac disease-associated antibodies before the diagnosis of celiac disease was made. The second aim was to describe when and in which order celiac disease-associated and type 1 diabetes-associated antibodies appeared in children with genetic risk for both diseases. Subjects and Methods: Antibodies against tissue transglutaminase (TGA) and other celiac disease-associated antibodies were measured in serum samples collected at 3- to 12-month intervals of children at genetic risk for celiac disease who participated in the DIPP project. Celiac disease was confirmed by duodenal biopsy. Type 1 diabetes-associated antibodies were measured in all samples that had been collected. Overt disease was diagnosed according to World Health Organization criteria. Follow-up continued until a diagnosis of type 1 diabetes or until the end of a defined follow-up period. Results: TGA appeared in children at genetic risk for celiac disease only after the first year of life, but anti-gliadin antibodies often emerged significantly earlier, at age 6 months. The data show that spontaneous disappearance of celiac disease-associated antibodies, transient or persisting, is a common phenomenon, at least in prepubertal children. In children with genetic susceptibility to type 1 diabetes and celiac disease, celiac disease-associated antibodies usually develop earlier than the type 1 diabetes-associated antibodies. Conclusions: The transient nature of celiac disease-associated antibodies emphasizes the significance of establishing seropositivity repeatedly in screening detected celiac disease before gastroscopy and duodenal biopsy are considered and emphasized the importance of duodenal biopsy for diagnosing celiac disease.

Performance impact of the application of castor oil biodiesel in diesel engines

The use of renewable fuels, such as the biodiesel, can ease the demand of fossil fuel for the power generation and transportation fields in rural area. In this work, the performance impact of the application of castor oil biodiesel is evaluated with an automotive and a stationary diesel engine. The application of B20 and B10 biodiesel blends and pre-heated net biodiesel is considered. The viability of the employment of B10 and B20 blends to mobility and power generation was observed from dynamometric bench tests, where this blends performed similar to fossil diesel. With the pre-heated net biodiesel, however, a brake torque loss and a specific consumption increase were observed with relation to diesel fuel.

Ultra-sonografia intra-operatória durante colecistectomia laparoscópica

Durante um período de sete meses, em noventa pacientes submetidos à colecistectomia laparoscópica foi realizada ultra-sonografia intra-operatória e, em 81 pacientes, a colangiografia intra-operatória foi possível. A ultra-sonografia laparoscópica (USL) foi realizada através dos trocartes umbilical e epigástrico, sem mobilização duodenal e após a colangiografia sistemática. A USL detectou coledocolitíase em 11 pacientes (12,2%), embora apenas seis (6,6%) destes pacientes tivessem este diagnóstico antes da cirurgia. A colangiografia diagnosticou coledocolitíase em 8,8% dos casos. As vias biliares foram visualizadas pela USL em todos os casos. Durante a colecistectomia laparoscópica, a ultra-sonografia intra-operatória é uma técnica simples e eficiente na detecção de cálculos na via biliar principal.

Papiloduodenectomia como alternativa terapêutica para tumores papilares

The papiloduodenectomy is a procedure that, although accomplished rarely, has its validity in selected cases of papillary tumors. It is included in this group the patients with important diseases that doesn't have conditions of supporting the surgery of Whipple, the standard procedure for these pathologies. The authors review its experience with four patient carriers of malign neoplasia of the duodenal papila submitted to papiloduodenectomy. All the patients came jaundiced to the admission. The age varied of 62 to 82 years. The ultrassonography, the computed tomography and the endoscopy with biopsy were used for diagnosis and staging, and all the patients presented with initial stages (TI or T2). Two patients were classified as ASA3 and the other two as ASA4, according to the American Society of Anesthesiology. All the diagnoses were proven by the pathological exam of the surgical piece. It is ended that this procedure facilitates to obtain appropriate margins and satisfactory results when indicated of appropriate way.

Nova técnica de anastomose gastrojejunal no tratamento paliativo do câncer da cabeça do pâncreas

A maioria dos pacientes com câncer de pâncreas apresenta estdios avançados e é tratada paliativamente. Dos que são submetidos exclusivamente a derivação biliar, cerca de 30%-50% vão apresentar na evolução necessidade de tratamento de obstrução duodenal. As técnicas atualmente empregadas para derivação gástrica podem acarretar vômitos pós-operatórios, principalmente quando feitas profilaticamente. Uma nova técnica foi planejada para evitar alterações no mecanismo de esvaziamento gátrico e a recirculação do conteúdo alimentar. Esta técnica consta de anastomose gastrojejunal entre o corpo gátrico e a primeira alça jejunal tipo Braun em que a alça aferente é bloqueada evitando o ciclo vicioso alimentar. A reconstituição do trânsito alimentar é feita a jusante desta anastomose, impedindo o refluxo biliar para o estômago. Dezenove pacientes foram tratados consecutivamente sem complicações. A sonda nasogástrica foi retirada em torno do terceiro dia de pós-operatório e iniciada realimentação no dia seguinte. Não se observaram vômitos no pós-operatório imediato ou tardio em decorrência de retardo do esvaziamento gátrico.

Fistula gastrocólica

A case of gastrocolic fistula(GCF) in a patient with duodenal stenosis who had previously undergone gastroenteric anastomosis is reported. The patient went through hemigastrectomy, partial colectomy and segmental enterectomy with bloc resection. Reconstruction was carried out through Billroth II gastrojejunostomy, jejunojejunostomy and end-to-end anastomosis of the colon. The patient had good post-operative evolution and was discharged from hospital seven days after surgery. GCF should be suspected in patients presenting weight loss, diarrhea and fecal vomiting, mainly with history of peptic ulcer surgery, gastric or colonic malignancy and use of steroidal and nonsteroidal antiinflamatory drugs. Barium enema is the choice test for diagnosis, however, the benign or malignant nature of the lesion should always be evaluated through high digestive endoscopy. Clinical treatment with oral H2-antagonists and discontinuing ulcerogenic medications might be indicated in some cases; surgical treatment is indicated in cases of malignant disease and might be indicated in cases of peptic disease as it treats GCF and also the baseline disease. Some advise upwards colostomy at first. The most used technique is bloc resection, including the fistulous tract, hemigastrectomy and partial colectomy. Gastrectomy, fistulous tract excision and colon suturing may be performed in some cases. The mortality rate is related to metabolic disorders and the recurrence with the use of antiinflammatory drugs.

Úlcera péptica terebrante na cabeça do pâncreas: conduta cirúrgica no chamado duodeno difícil

É apresentada uma conduta cirúrgica para o descolamento do duodeno nas ressecções gastroduodenais por úlcera terebrante na cabeça do pâncreas. Constituem os fundamentos dessa tática a mobilização retrógrada adequada da segunda porção do duodeno por meio da manobra de Kocher, a secção oblíqua do duodeno na altura da borda distal do nicho ulceroso e a introdução, pelo cirurgião, do seu dedo indicador na luz da víscera para palpar a papila duodenal maior. Essa medida permite encontrar o plano de clivagem para separar a parede duodenal da cabeça do pâncreas e afastar o risco de lesão das vias biliares e pancreáticas. O duodeno, assim preparado, possibilita sua utilização para eventual anastomose gastroduodenal ou sua exclusão quando se deseja proceder a gastrojejunostomia.

Tricobezoares no estômago, duodeno e íleo

A 21-year-old girl presents with a 15-day history of epigastric pain and vomiting. Ten days later, constipation and abdominal distension followed. The patient reported similar epigastric pain and vomiting for 6 days last year. A painless epigastric 12-by-8-centimeter tumor was observed on abdominal palpation, and rectal examination revealed an extrinsic tumor compressing anterior rectal wall. Upper digestive endoscopy showed a trichobezoar. Upon laparotomy, one gastric and one duodenal trichobezoar were removed through an anterior gastrotomy. Another one was found 40 centimeters proximal to the ileo-cecal valve and removed through a proximal ileotomy. Trichobezoar is an unspecific disease, which diagnosis is made upon suspicion. Early recognition of bezoars is important because morbidity and mortality rise considerably once complications occur. We illustrate this case to emphasize the need for early recognition and surgical management in order to reduce morbimortality.

Síndrome da artéria mesentérica superior

The Superior Mesenteric Syndrome is a rare and controversial disease. The compression of the duodenum by the mesenteric artery and aorta causes an intermitent obstruction. Preoperative diagnosis is very difficult.We present one case of this syndrome in a pacient with severe weight loss and signs of high intestinal obstruction. The diagnosis was based on clinical and radiologic findings. A duodenojejunostomy was performed after medical treatment failure.This patient died on the 20th posoperative day due to cardiac complications. This syndrome must be remembered in cases of high obstruction in chronic ill patients.