Essays on Personnel Economics and Gender Issues

This thesis consists of four self-contained essays in economics. Tournaments and unfair treatment. This paper introduces the negative feelings associated with the perception of being unfairly treated into a tournament model and examines the impact of these perceptions on workers’ efforts and their willingness to work overtime. The effect of unfair treatment on workers’ behavior is ambiguous in the model in that two countervailing effects arise: a negative impulsive effect and a positive strategic effect. The impulsive effect implies that workers react to the perception of being unfairly treated by reducing their level of effort. The strategic effect implies that workers raise this level in order to improve their career opportunities and thereby avoid feeling even more unfairly treated in the future. An empirical test of the model using survey data from a Swedish municipal utility shows that the overall effect is negative. This suggests that employers should consider the negative impulsive effect of unfair treatment on effort and overtime in designing contracts and determining on promotions. Late careers in Sweden between 1970 and 2000. In this essay Swedish workers’ late careers between 1970 and 2000 are studied. The aim is to examine older workers’ career patterns and whether they have changed during this period. For example, is there a difference in career mobility or labor market exiting between cohorts? What affects the late career, and does this differ between cohorts? The analysis shows that between 1970 and 2000 the late careers of Swedish workers comprised of few job changes and consisted more of “trying to keep the job you had in your mid-fifties” than of climbing up the promotion ladder. There are no cohort differences in this pattern. Also a large fraction of the older workers exited the labor market before the normal retirement age of 65. During the 1970s and first part of the 1980s, 56 percent of the older workers made an early exit and the average drop-out age was 63. During the late 1980s and the 1990s the share of old workers who made an early exit had risen to 76 percent and the average drop-out age had dropped to 61.5. Different factors have affected the probabilities of an early exit between 1970 and 2000. For example, skills did affect the risk of exiting the labor market during the 1970s and up to the mid-1980s, but not in the late 1980s or the 1990s. During the first period old workers in the lowest occupations or with the lowest level of education were more likely to exit the labor market than more highly skilled workers. In the second period old workers at all levels of skill had the same probability of leaving the labor market. The growth and survival of establishments: does gender segregation matter? We empirically examine the employment dynamics that arise in Becker’s (1957) model of labor market discrimination. According to the model, firms that employ a large fraction of women will be relatively more profitable due to lower wage costs, and thus enjoy a greater probability of surviving and growing by underselling other firms in the competitive product market. In order to test these implications, we use a unique Swedish matched employer-employee data set. We find that female-dominated establishments do not enjoy any greater probability of surviving and do not grow faster than other establishments. Additionally, we find that integrated establishments, in terms of gender, age and education levels, are more successful than other establishments. Thus, attempts by legislators to integrate firms along all dimensions of diversity may have positive effects on the growth and survival of firms. Risk and overconfidence – Gender differences in financial decision-making as revealed in the TV game-show Jeopardy. We have used unique data from the Swedish version of the TV-show Jeopardy to uncover gender differences in financial decision-making by looking at the contestants’ final wagering strategies. After ruling out empirical best-responses, which do appear in Jeopardy in the US, a simple model is derived to show that risk preferences, the subjective and objective probabilities of answering correctly (individual and group competence), determine wagering strategies. The empirical model shows that, on average, women adopt more conservative and diversified strategies, while men’s strategies aim for the greatest gains. Further, women’s strategies are more responsive to the competence measures, which suggests that they are less overconfident. Together these traits make women more successful players. These results are in line with earlier findings on gender and financial trading.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Essays in Behavioral Personnel Economics

The thesis contemplates 4 papers and its main goal is to provide evidence on the prominent impact that behavioral analysis can play into the personnel economics domain.The research tool prevalently used in the thesis is the experimental analysis.The first paper provide laboratory evidence on how the standard screening model–based on the assumption that the pecuniary dimension represents the main workers’choice variable–fails when intrinsic motivation is introduced into the analysis.The second paper explores workers’ behavioral reactions when dealing with supervisors that may incur in errors in the assessment of their job performance.In particular,deserving agents that have exerted high effort may not be rewarded(Type-I errors)and undeserving agents that have exerted low effort may be rewarded(Type-II errors).Although a standard neoclassical model predicts both errors to be equally detrimental for effort provision,this prediction fails when tested through a laboratory experiment.Findings from this study suggest how failing to reward deserving agents is significantly more detrimental than rewarding undeserving agents.The third paper investigates the performance of two antithetic non-monetary incentive schemes on schooling achievement.The study is conducted through a field experiment.Students randomized to the main treatments have been incentivized to cooperate or to compete in order to earn additional exam points.Consistently with the theoretical model proposed in the paper,the level of effort in the competitive scheme proved to be higher than in the cooperative setting.Interestingly however,this result is characterized by a strong gender effect.The fourth paper exploits a natural experiment setting generated by the credit crunch occurred in the UK in the2007.The economic turmoil has negatively influenced the private sector,while public sector employees have not been directly hit by the crisis.This shock–through the rise of the unemployment rate and the increasing labor market uncertainty–has generated an exogenous variation in the opportunity cost of maternity leave in private sector labor force.This paper identifies the different responses.

Outdoor bronze conservation: assessment of protective treatments by accelerated aging and of treatment removal procedures by laser cleaning

Outdoor bronzes exposed to the environment form naturally a layer called patina, which may be able to protect the metallic substrate. However, since the last century, with the appearance of acid rains, a strong change in the nature and properties of the copper based patinas occurred [1]. Studies and general observations have established that bronze corrosion patinas created by acid rain are not only disfiguring in terms of loss of detail and homogeneity, but are also unstable [2]. The unstable patina is partially leached away by rainwater. This leaching is represented by green streaking on bronze monuments [3]. Because of the instability of the patina, conservation techniques are usually required. On a bronze object exposed to the outdoor environment, there are different actions of the rainfall and other atmospheric agents as a function of the monument shape. In fact, we recognize sheltered and unsheltered areas as regards exposure to rainwater [4]. As a consequence of these different actions, two main patina types are formed on monuments exposed to the outdoor environment. These patinas have different electrochemical, morphological and compositional characteristics [1]. In the case of sheltered areas, the patina contains mainly copper products, stratified above a layer strongly enriched in insoluble Sn oxides, located at the interface with the uncorroded metal. Moreover, different colors of the patina result from the exposure geometry. The surface color may be pale green for unsheltered areas, and green and mat black for sheltered areas [4]. Thus, in real outdoor bronze monuments, the corrosion behavior is strongly influenced by the exposure geometry. This must be taken into account when designing conservation procedures, since the patina is in most cases the support on which corrosion inhibitors are applied. Presently, for protecting outdoor bronzes against atmospheric corrosion, inhibitors and protective treatments are used. BTA and its derivatives, which are the most common inhibitors used for copper and its alloy, were found to be toxic for the environment and human health [5, 6]. Moreover, it has been demonstrated that BTA is efficient when applied on bare copper but not as efficient when applied on bare bronze [7]. Thus it was necessary to find alternative compounds. Silane-based inhibitors (already successfully tested on copper and other metallic substrates [8]), were taken into consideration as a non-toxic, environmentally friendly alternative to BTA derivatives for bronze protection. The purpose of this thesis was based on the assessment of the efficiency of a selected compound, to protect the bronze against corrosion, which is the 3-mercapto-propyl-trimethoxy-silane (PropS-SH). It was selected thanks to the collaboration with the Corrosion Studies Centre “Aldo Daccò” at the Università di Ferrara. Since previous studies [9, 10, 11] demonstrated that the addition of nanoparticles to silane-based inhibitors leads to an increase of the protective efficiency, we also wanted to evaluate the influence of the addition of CeO2, La2O3, TiO2 nanoparticles on the protective efficiency of 3-mercapto-propyl-trimethoxy-silane, applied on pre-patinated bronze surfaces. This study is the first section of the thesis. Since restorers have to work on patinated bronzes and not on bare metal (except for contemporary art), it is important to be able to recreate the patina, under laboratory conditions, either in sheltered or unsheltered conditions to test the coating and to obtain reliable results. Therefore, at the University of Bologna, different devices have been designed to simulate the real outdoor conditions and to create a patina which is representative of real application conditions of inhibitor or protective treatments. In particular, accelerated ageing devices by wet & dry (simulating the action of stagnant rain in sheltered areas [12]) and by dropping (simulating the leaching action of the rain in unsheltered areas [1]) tests were used. In the present work, we used the dropping test as a method to produce pre-patinated bronze surfaces for the application of a candidate inhibitor as well as for evaluating its protective efficiency on aged bronze (unsheltered areas). In this thesis, gilded bronzes were also studied. When they are exposed to the outside environment, a corrosion phenomenon appears which is due to the electrochemical couple gold/copper where copper is the anode. In the presence of an electrolyte, this phenomenon results in the formation of corrosion products than will cause a blistering of the gold (or a break-up and loss of the film in some cases). Moreover, because of the diffusion of the copper salts to the surface, aggregates and a greenish film will be formed on the surface of the sample [13]. By coating gilded samples with PropS-SH and PropS-SH containing nano-particles and carrying out accelerated ageing by the dropping test, a discussion is possible on the effectiveness of this coating, either with nano-particles or not, against the corrosion process. This part is the section 2 of this thesis. Finally, a discussion about laser treatment aiming at the assessment of reversibility/re-applicability of the PropS-SH coating can be found in section 3 of this thesis. Because the protective layer loses its efficiency with time, it is necessary to find a way of removing the silane layer, before applying a new one on the “bare” patina. One request is to minimize the damages that a laser treatment would create on the patina. Therefore, different laser fluences (energy/surface) were applied on the sample surface during the treatment process in order to find the best range of fluence. In particular, we made a characterization of surfaces before and after removal of PropS-SH (applied on a naturally patinated surface, and subsequently aged by natural exposure) with laser methods. The laser removal treatment was done by the CNR Institute of Applied Physics “Nello Carrara” of Sesto Fiorentino in Florence. In all the three sections of the thesis, a range of non-destructive spectroscopic methods (Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), μ-Raman spectroscopy, X-Ray diffractometry (XRD)) were used for characterizing the corroded surfaces. AAS (Atomic Absorption Spectroscopy) was used to analyze the ageing solutions from the dropping test in sections 1 and 2.

Gilded bronze conservation: assessment of protective treatments by accelerated ageing and of treatment removal procedures by laser cleaning

In the current study, we analyze the effectiveness of an organosilane compound, 3-mercapto-propyl-tri-methoxy-silane (abbreviated PropS-SH), in the corrosion protection of fire-gilded bronzes. Firstly, the coating was applied on as-gilded bronze. Subsequently, it was also applied on pre-patinated bronze, because the substrate on which protective coatings are applied in real conservation interventions are corroded artifacts (cleaning procedures never remove all the corrosion products). Aiming to obtain results that simulate the situation of real artifacts, a dropping test that simulates outdoor exposure in runoff conditions (unsheltered areas of monuments) was employed in order to prepatinate the gilded bronze samples, which are the substrate for applying the protective coating. The preparation of the samples by applying the protective coating was performed in collaboration with the Corrosion Studies Centre “Aldo Daccò” from Ferrara University. After the artificial exposure cycles the samples underwent investigations through a variety of spectroscopic methods including SEM, Raman, FIB, AAS and color measurements. In order to evaluate the possible removal of the organosilane coating, protected samples were subjected to laser cleaning tests and characterized by SEM/EDS so as to assess the changes in composition and morphology of the treated surfaces. The laser cleaning treatment was performed at the Institute of Applied Physics “Nello Carrara” (CNR Sesto Fiorentino (FI)). The morphology and chemical composition of the samples was observed before and after the operation in order to obtain information about the fluence and type of laser which are best suited to the removal of this type of coating.

Accidental infection of veterinary personnel with Mycobacterium tuberculosis at necropsy: a case study

Mycobacterium tuberculosis is the main cause of human tuberculosis. Infection in companion animals is mainly acquired from close contact to a diseased human patient and hence rarely diagnosed in countries with low tuberculosis incidence rates. Therefore the general awareness of the disease might be low. Here we report the potential risk of infection for veterinary personnel with M. tuberculosis during the clinical and pathological examination of a dog with unexpected disseminated tuberculosis. The dog had presented with symptoms of a central nervous system disease; rapid deterioration prevented a complete clinical workup, however. Post-mortem examination revealed systemic mycobacteriosis, and M. tuberculosis was identified by PCR amplification of DNA extracts from paraffin-embedded tissue sections and spoligotyping. Contact investigations among the owners and veterinary personnel using an IFN-? release assay indicated that the index dog did not infect humans during its lifetime. Serological and IFN-? release assay results of one of two cats in direct contact with the index dog, however, suggested that transmission of M. tuberculosis might have occurred. Importantly, all three pathologists performing the necropsy on the dog tested positive. Accidental infection was most likely due to inhalation of M. tuberculosis containing aerosols created by using an electric saw to open the brain cavity. As a consequence routine necropsy procedures have been adapted and a disease surveillance program, including tuberculosis, has been initiated. Our results highlight the importance of disease awareness and timely diagnosis of zoonotic infectious agents in optimizing work safety for veterinary personnel.

Low rate of methicillin-resistant coagulase-positive staphylococcal colonization of veterinary personnel in Hong Kong

Elevated rates of methicillin-resistant Staphylococcus aureus (MRSA) carriage have been reported in veterinary personnel, suggesting an occupational colonization risk. Hong Kong veterinary personnel (n = 150) were sampled for coagulase-positive staphylococci (CPS) nasal colonization. Risk factors for colonization were assessed by questionnaire. Isolates were identified and antibiotic susceptibility determined. All CPS isolates were investigated for mecA carriage, SCCmec type and PVL genes. Two subjects were colonized with methicillin-resistant CPS: one with MRSA (spa type t002 (CC5), SCCmec type II) and one with methicillin-resistant Staphylococcus pseudintermedius (MRSP) (MLST type ST71, SCCmec type II-III). MLST type ST71 S. pseudintermedius strain is the predominant MRSP clone circulating in dogs in Europe and in Hong Kong. The low MR-CPS colonization rate may be associated with low levels of large animal exposure or low rates of MRSA colonization of companion animals in Hong Kong. Colonization with non-aureus CPS, which may cause human infection, must also be considered in veterinary personnel.

Evolution of multidrug-resistant Staphylococcus aureus infections in horses and colonized personnel in an equine clinic between 2005 and 2010

A total of 70 Staphylococcus aureus isolates from postoperative infections in hospitalized horses were isolated between January 2005 and January 2011. Among them, 12 isolates were methicillin-susceptible S. aureus (MSSA), 18 were borderline-oxacillin-resistant S. aureus (BORSA), and 40 were methicillin-resistant S. aureus (MRSA). During the same period, the equine clinic personnel were screened for nasal carriage of BORSA and MRSA. Genotyping revealed that BORSA ST1(MLST)-t2863(spa) isolates were responsible for most equine infections and were the main isolates found in colonized members of the personnel between 2005 and 2007, and that in 2007, MRSA ST398-t011-IVa(SCCmec) emerged in infection sites and personnel, replacing BORSA. Besides decreased susceptibility to oxacillin, all MRSA and BORSA of these two major clonal lineages displayed resistance to gentamicin and kanamycin conferred by the aac(6')-Ie-aph(2')-Ia gene and to trimethoprim conferred by dfr(K) in MRSA and dfr(A) in BORSA. All MRSA had additional resistance to tetracycline conferred by tet(M), whereas BORSA generally also display resistance to streptomycin conferred by str. The number of hospital-acquired MRSA infections in horses could be limited after the introduction of basic hygiene measures and personnel decolonization. Two MRSA carriers could not be decolonized using mupirocin, and a year after decolonization, additional members were recolonized with MRSA. Hygiene measures should, therefore, be maintained to limit the transmission of S. aureus between personnel and horses.