Greenhouse gas emissions from waste management—assessment of quantification methods

Of the many sources of urban greenhouse gas (GHG) emissions, solid waste is the only one for which management decisions are undertaken primarily by municipal governments themselves and is hence often the largest component of cities’ corporate inventories. It is essential that decision-makers select an appropriate quantification methodology and have an appreciation of methodological strengths and shortcomings. This work compares four different waste emissions quantification methods, including Intergovernmental Panel on Climate Change (IPCC) 1996 guidelines, IPCC 2006 guidelines, U.S. Environmental Protection Agency (EPA) Waste Reduction Model (WARM), and the Federation of Canadian Municipalities- Partners for Climate Protection (FCM-PCP) quantification tool. Waste disposal data for the greater Toronto area (GTA) in 2005 are used for all methodologies; treatment options (including landfill, incineration, compost, and anaerobic digestion) are examined where available in methodologies. Landfill was shown to be the greatest source of GHG emissions, contributing more than three-quarters of total emissions associated with waste management. Results from the different landfill gas (LFG) quantification approaches ranged from an emissions source of 557 kt carbon dioxide equivalents (CO2e) (FCM-PCP) to a carbon sink of −53 kt CO2e (EPA WARM). Similar values were obtained between IPCC approaches. The IPCC 2006 method was found to be more appropriate for inventorying applications because it uses a waste-in-place (WIP) approach, rather than a methane commitment (MC) approach, despite perceived onerous data requirements for WIP. MC approaches were found to be useful from a planning standpoint; however, uncertainty associated with their projections of future parameter values limits their applicability for GHG inventorying. MC and WIP methods provided similar results in this case study; however, this is case specific because of similarity in assumptions of present and future landfill parameters and quantities of annual waste deposited in recent years being relatively consistent.

Construction and demolition waste as a source of PVC for recycling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Wastes released by tanneries at Patrocinio Paulista, São Paulo State, Brazil

This investigation was carried out within the Parana sedimentary basin, Brazil, and involved the sampling of sludge and residuary waters that were collected from reservoirs/decantation ponds settled in two tanneries situated at Patrocinio Paulista, São Paulo State Two samples from each tannery were collected, stored in appropriate flasks and transported to the LABIDRO for chemical analysis The LABIDRO (Laboratory of Isotopes and Hydrochemistry) of the Petrology Department at the Geosciences and Exacts Sciences Institute of UNESP is situated in Rio Claro city, about 240 km distant from the investigated area The data for residuary waters were compared with guideline values established by two different legislations (a) Rule No 12486 (NTA60) established in 20(th) October 1978 by São Paulo State for defining the potable water standards and (b) Register 997 published on 31 May 1976 that defines the permissible concentration limits in effluents to be released to water bodies (coastal, fresh or ground water) in São Paulo State The results confirmed that leather production is an activity with high environmental impact, despite improvements that may be achieved by tanneries

Recycling potential of urban solid waste destined for sanitary landfills: the case of Indaiatuba, SP, Brazil

The urban solid waste of the city of Indaiatuba (pop. 175 000), located in the state of São Paulo, was characterized, focusing on the recycling potential. For this purpose, collected waste was subdivided into 27 items, classified by mass and volume. About 90% of this waste was found to be potentially recyclable and only 10% requiring landfilling. The compostable organic matter, in the form of food and garden waste, both with high moisture content (51 and 41%, respectively), represents 54% in mass and 21% in volume. The most common type of plastic in this waste is high density polyethylene, whose estimated disposal is about 5000 kg day(-1). A socio-economic analysis of the waste generation indicates that low-income neighbourhoods discard relatively less packaging and more food waste, shoes and construction debris than middle and high income ones, which may be due to low purchasing power and schooling. Our findings indicate that more aluminium and uncoloured polyethylene terephthalate is discarded in the warmest months of the year, probably due to a greater consumption of canned and bottled drinks.

Valor nutritivo de macrófitas aquáticas flutuantes (Eichhornia crassipes, Pistia stratiotes e Salvinia molesta) utilizadas no tratamento de efluentes de aqüicultura

The aim of this study was to evaluate the nutritive value of free-floating aquatic macrophytes, Eichhornia crassipes (Mart.) Solms (Pontederiaceae), Pistia stratiotes (L.) (Araceae) and Salvinia molesta (Mitchell) (Salviniaceae) used in a Nile tilapia (Oreochromis niloticus) waste treatment, and these species biomass potential uses. The vegetal biomass samples were collected from 0.25 m 2 floating squares and divided in aerial and submerse parts, to determine the concentrations of cell wall fraction, soluble carbohydrates, polyphenols, lipids, crude protein and total phosphorus. The higher nutritive value was observed in E. crassipes and S. molesta aerial parts, and in P. stratiotes total biomass, due to their lower cell wall fraction mean rates (60.7; 64.2 and 56.9 % dry mass, respectively) and to the higher rates of: crude protein (10.1; 9.1 and 8.8 % dry mass, respectively), soluble carbohydrates (26.6; 18.7 and 12.4 mg.g -1 dry mass, respectively) and lipids (7.6; 4.5 and 4.4% dry mass, respectively). It may be concluded that P. stratiotes total biomass, and E. crassipes and S. molesta aerial biomass have nutritive values with potential use for ruminant feeding or as ration ingredients.

Maturity degree of composts from municipal solid wastes evaluated by differential scanning calorimetry

Differential scanning calorimetry (DSC) in association with chemical analysis was applied to assess the maturity reached by the organic fraction of Municipal Solid Wastes (MSW) subjected to composting processes with manual and fixed aeration and sampled at different composting times. Thermograms showed that the difference in the treatments, i.e., the manual aeration and the fixed aeration, had no relevant effect on the stabilization and maturation of OM in the substrates. Common thermal effects observed were: a low temperature endotherm assigned to dehydration and/or loss of peripheral polysaccharides chains; a medium temperature exotherm assigned to loss of peptidic structures, and a high temperature exotherm assigned to oxydation and polycondensation of aromatic nuclei of the molecule. Results obtained suggest that in the experimental conditions used, a shorter time of composting (about 30 d) appears adequate, in order to limit the extended mineralization of OM, whereas a prolonged composting time (up to 132 d) would produce a compost of poor quality with high ash content and low OM content.

Air quality and emissions management in the State of São Paulo, Brazil

The São Paulo State has 36 million people, 25 million living in three metropolitan areas. Only the São Paulo Metropolitan Region (SPMR) includes the state capital (São Paulo City) plus 38 cities, where ≈ 18 million people live, affected by frequent episodes of ozone, NOx, and fine particulate matter. In 2003, it was estimated that 15.1% of the SPMR vehicles used ethanol and 70.2% used the local gasoline. Natural gas vehicles have witnessed a booming participation in the last years, mainly through conversion of gasoline cars, and the present fleet is almost one million vehicles. To face the problems generated by light vehicles emissions the Federal Government set a program called PROCONVE - Program of Air Pollution Control from Vehicles - in 1986 and since then until now a significant reduction was reached, but the growth of the fleet hides most of the emission cuts. A discussion covers the evolution of the air pollution management in São Paulo; and innovative tools for air pollution management - both for mobile and stationary sources. This is an abstract of a paper presented at the 98th AWMA Annual Conference and Exhibition (Minneapolis, MN 6/21-24/2005).

Brazil's new national policy on solid waste: challenges and opportunities

Brazil, one of the world's largest developing countries, has recently introduced a new solid waste management regulatory policy. This new regulatory policy will have implications for a wide variety of stakeholders and sets the stage for opportunities and lessons to be learned. These issues are discussed in this article. © 2013 Springer-Verlag Berlin Heidelberg.

Analysis of hybrid waste-to-energy for medium-sized cities

Urban centers have a huge demand for electricity and the growing problem of the solid waste management generated by their population, a relevant social and administrative problem. The correct disposal of the municipal solid waste (MSW) generated in cities is one of the most complex engineering problems that involves logistics, safety, environmental and energetic aspects for its adequate management. Due to a national policy of solid wastes recently promulgated, Brazilian cities are evaluating the technical and economic feasibility of incinerating the non-recyclable waste. São José dos Campos, a São Paulo State industrialized city, is considering the composting of organic waste for biogas production and mass incineration of non-recyclable waste. This paper presents a waste-to-energy system based on the integration of gas turbines to a MSW incinerator for producing thermal and electric energy as an alternative solution for the solid waste disposal in São José dos Campos, SP. A technical and economic feasibility study for the hybrid combined cycle plant is presented and revealed to be attractive when carbon credit and waste tax are included in the project income. © 2013 Elsevier Ltd.

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical-chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal. © 2013 Elsevier Ltd. All rights reserved.

Efficacy of sulfadoxine plus trimethoprim compared to management measures for the control of Eimeria parasitism in naturally infected and clinically asymptomatic sheep that were maintained in a feedlot

The efficacy of sulfadoxine + trimethoprim in comparison to management measures for the control of Eimeria parasitism was studied in naturally infected sheep that were raised in a feedlot and were clinically asymptomatic for eimeriosis. Weight gain was also evaluated in these animals. The following groups were formed with 15 animals/group: TO!, control animals that received saline solution and maintenance of the same management measures that were performed before the study; T02, animals that received two intramuscular doses of sulfadoxine (20 mg/kg) + trimethoprim (4 mg/kg) with a 14-day interval; T03, sheep that received two intramuscular doses of sulfadoxine (20 mg/kg) + trimethoprim (4 mg/kg) with a 14-day interval plus management measures (wood shaving bedding was changed every Monday, and 30g of ammonium sulfate were applied to the bedding and other facilities were performed every Thursday, 10 mL/20 L of water); and T04, animals that received only the management measures described for the previous group. The highest efficacy rates (arithmetic mean) for the T02 group (sulfadoxine + trimethoprim at days 0 and 14) were 21.04% and 21.98% on the 14th and 28th days after the first treatment (DAFT), respectively. However, the treatment showed efficacy rates below 17% and was totally ineffective from the 70th DAFT to the end of the study. In both the T03 (chemical treatment+ management) and T04 (management only) groups, a significant (P <= 0.05) reduction of oocyst shedding per gram of feces was observed in the animals from the 14th DAFT in comparison to the control group; however, an efficacy rate above 90% was observed from the 28th DAFT. Animals belonging to the T02, T03 and T04 groups presented with alterations in weight gain of 0.57 kg, 4.30 kg and 4.53 kg, respectively, in comparison with the control animals (T01) throughout the 91-day study period. Thus, it is possible to conclude that the two-dose sulfadoxine + trimethoprim treatment, given with a 14-day interval, had little no effect on the oocyst shedding. Moreover, the adopted management measures were enough to cause a significant decrease in the animal parasite loads. (C) 2013 Published by Elsevier B.V.

Gerenciamento dos resíduos de serviços de saúde da Unidade de Terapia Intensiva do Pronto Socorro do Hospital das Clínicas da Faculdade de Medicina de Botucatu – UNESP

Health care waste (HCW) is the type of waste that results from activities performed in health care services during care provision to humans or animals. Presently, according to RDC 306/04, issued in 2004 by Anvisa, and Resolution no. 358/05, by CONAMA, waste groups have the following classification: Group A (biological waste), Group B (chemical waste), Group C (waste containing radionucleotides), Group D (common waste) and Group E (piercing and cutting waste). In Brazil, 149 tons of wastes are collected every day, and HCW corresponds to approximately 1% to 3 % of that total. An efficient way to adequately manage HCW is through the Health Care Waste Management Plan (HCWMP), and it is possible to reduce the risk posed by certain materials in addition to ensuring disposal in an ecologically correct and economical fashion. According to the Pan-American Health Organization (PAHO), the management process enables health care establishments to adequately manage waste. Hence, there is greater control and reduction in the health risks caused by infectious or special waste, in addition to facilitated recycling, treatment, storage, transport and final disposal of solid hospital waste in an environmentally safe fashion. To evaluate the management of HCW of Groups A and D from the Intensive Care Unit of the University Emergency Hospital - FMB - UNESP in the city of Botucatu according to the guidelines presently in force. The waste flow was followed up, and during four random days in the month of September 2011, waste was quantified by estimating daily and monthly values, according to its classification. : In 2011, the University hospital has produced an average of 57,676.8 kg/month of biological and common waste. By adding Groups A and D, during the four days, approximately 209.8 Kg of waste (202.2 Kg of Group A and 7.6 Kg of Group D) were produced in the establishment under study, which... (Complete abstract click electronic access below)

Histopathological changes in the perivisceral fat body of Rhinocricus padbergi (Diplopoda, Spirobolida) triggered by biosolids

Human activities generate a great amount of sewage daily, which is dumped into the sewer system. After sewage-treatment processes, sewage sludge is generated. Such byproduct can be treated by different methods; the result of treatment is a stabilized compost of reduced pathogenicity that has a similar inorganic chemical composition to the raw sewage sludge. After such pretreatment, sewage sludge is called a biosolids, and it can be used in agriculture. In this contest, the present study evaluated the effects of a sample of biosolids on the perivisceral fat body of a diplopod. These invertebrates are soil organisms that play an important role in the dynamics of terrestrial ecosystems, and as a consequence, they are in contact with xenobiotics present in this environmental compartment. Special emphasis is given on the interpretation of the effects of complex mixtures in target organs of diplopods. A semiquantitative analysis for the evaluation of histopathological changes in the perivisceral fat body was proposed. The sample-induced histopathological and ultrastructural changes in individuals exposed to it, and the severity of the effects was positively related to the exposure time, resulting in the deaths of exposed individuals after 90 days. Thus, the results indicate the need for caution in the use of biosolids as well as the need for improving waste management techniques, so they will produce environmentally innocuous final products.

Consolidation of international guidelines for the management of canine populations in urban areas and proposal of performance indicators

Consolidation of international guidelines for the management of canine populations in urban areas and proposal of performance indicators The objective of this study is to propose a generic program for the management of urban canine populations with suggestion of performance indicators. The following international guidelines on canine population management were revised and consolidated: World Health Organization, World Organisation for Animal Health, World Society for the Protection of Animals, International Companion Animal Management Coalition, and the Food and Agriculture Organization. Management programs should cover: situation diagnosis, including estimates of population size; social participation with involvement of various sectors in the planning and execution of strategies; educational actions to promote humane values, animal welfare, community health, and responsible ownership (through purchase or adoption); environmental and waste management to eliminate sources of food and shelter; registration and identification of animals; animal health care, reproductive control; prevention and control of zoonoses; control of animal commerce; management of animal behavior and adequate solutions for abandoned animals; and laws regulating responsible ownership, prevention of abandonment and zoonoses. To monitor these actions, four groups of indicators are suggested: animal population indicators, human/animal interaction indicators, public service indicators, and zoonosis indicators. The management of stray canine populations requires political, sanitary, ethologic, ecologic, and humanitarian strategies that are socially acceptable and environmentally sustainable. Such measures must also include the control of zoonoses such as rabies and leishmaniasis, considering the concept of "one health," which benefits both the animals and people in the community.

A percepção dos trabalhadores de enfermagem sobre o manejo dos resíduos químicos perigosos

Este estudo objetivou identificar a percepção dos trabalhadores de enfermagem sobre o manejo dos resíduos químicos perigosos no Hospital Universitário da Universidade de São Paulo e elaborar uma proposta para o manejo desses resíduos. Trata-se de pesquisa de abordagem qualitativa, cuja amostra foi intencional, composta por dezoito trabalhadores de enfermagem. A coleta de dados foi realizada por meio da técnica de grupo focal. Com a análise temática foram identificadas quatro categorias que evidenciaram a deficiência de treinamento nas etapas do manejo, como a primeira dificuldade expressa, tendo aparecido ainda o desconhecimento da exposição e impactos, assim como o uso dos equipamentos de proteção individual em detrimento da proteção coletiva, seguidos das sugestões quanto às medidas de competência institucional e dos trabalhadores para o manejo seguro dos resíduos químicos perigosos. Esses dados permitiram recomendar propostas para o manejo adequado dos resíduos químicos perigosos pela enfermagem.