Sympathetic outflow activates the venom gland of the snake Bothrops jararaca by regulating the activation of transcription factors and the synthesis of venom gland proteins

The venom gland of viperid snakes has a central lumen where the venom produced by secretory cells is stored. When the venom is lost from the gland, the secretory cells are activated and new venom is produced. The production of new venom is triggered by the action of noradrenaline on both alpha(1)- and beta-adrenoceptors in the venom gland. In this study, we show that venom removal leads to the activation of transcription factors NF kappa B and AP-1 in the venom gland. In dispersed secretory cells, noradrenaline activated both NF kappa B and AP-1. Activation of NF kappa B and AP-1 depended on phospholipase C and protein kinase A. Activation of NF kappa B also depended on protein kinase C. Isoprenaline activated both NF kappa B and AP-1, and phenylephrine activated NF kappa B and later AP-1. We also show that the protein composition of the venom gland changes during the venom production cycle. Striking changes occurred 4 and 7 days after venom removal in female and male snakes, respectively. Reserpine blocks this change, and the administration of alpha(1)- and beta-adrenoceptor agonists to reserpine-treated snakes largely restores the protein composition of the venom gland. However, the protein composition of the venom from reserpinized snakes treated with alpha(1)- or beta-adrenoceptor agonists appears normal, judging from SDS-PAGE electrophoresis. A sexual dimorphism in activating transcription factors and activating venom gland was observed. Our data suggest that the release of noradrenaline after biting is necessary to activate the venom gland by regulating the activation of transcription factors and consequently regulating the synthesis of proteins in the venom gland for venom production.

Malaria on the Amazonian frontier: Transmission dynamics, risk factors, spatial distribution, and prospects for control

Little follow-up data on malaria transmission in communities originating from frontier settlements in Amazonia are available. Here we describe a cohort study in a frontier settlement in Acre, Brazil, where 509 subjects contributed 489.7 person-years of follow-up. The association between malaria morbidity during the follow-up and individual, household, and spatial covariates was explored with mixed-effects logistic regression models and spatial analysis. Incidence rates for Plasmodium vivax and Plasmodium falciparum malaria were 30.0/100 and 16.3/100 person-years at risk, respectively. Malaria morbidity was strongly associated with land clearing and farming, and decreased after five years of residence in the area, suggesting that clinical immunity develops among subjects exposed to low malaria endemicity. Significant spatial clustering of malaria was observed in the areas of most recent occupation, indicating that the continuous influx of nonimmune settlers to forest-fringe areas perpetuates the cycle of environmental change and colonization that favors malaria transmission in rural Amazonia.

Lacustrine sediments provide geochemical evidence of environmental change during the last millennium in southeastern Brazil

A 172 cm-long sediment core was collected from a small pristine lake situated within a centripetal drainage basin in a tropical karst environment (Ribeira River valley, southeastern Brazil) in order to investigate the paleoenvironmental record provided by the lacustrine geochemistry. Sediments derived from erosion of the surrounding cambisoils contain quartz, kaolinite, mica, chlorite and goethite. Accelerator mass spectroscopy (AMS) (14)C dating provided the geochronological framework. Three major sedimentary units were identified based on the structure and color of the sediments: Unit III from 170 to 140 cm (1030 +/- 60-730 +/- 60 yr BP), Unit II from 140 to 90 cm (730 +/- 60-360 +/- 60 yr BP) and Unit I from 90 to 0 cm (360 +/- 60-0 yr BP). Results of major and trace element concentrations were analysed through multivariate statistical techniques. Factor analysis provided three factors accounting for 72.4% of the total variance. F1 and F2 have high positive loadings from K, Ba, Cs, Rb, Sr, Sc, Th, light rare earth element (LREE), Fe, Cr, Ti, Zr, Hf and Ta, and high negative loadings from Mg, Co, Cu, Zn, Br and loss on ignition (LOI). F3, with positive loadings from V and non-metals As and Sb, accounts for a low percentage (9.7%) of the total variance, being therefore of little interpretative use. The profile distribution of F1 scores reveals negative values in Units I and III, and positive values in Unit II, meaning that K, Ba, Cs, Rb, Sr, Sc, Th, LREE, Fe, Cr, Ti, Zr, Hf and Ta are relatively more concentrated in Unit II, and Mg, Co, Cu, Zn and Br are relatively more abundant in Units I and III. The observed fluctuations in the geochemical composition of the sediments are consistent with slight variations of the erosion intensity in the catchment area as a possible response to variations of climatic conditions during the last millennium. (c) 2009 Elsevier GmbH. All rights reserved.

Be the Change You Wish to See: National Attiudes and Climate Change Policy

A multitude of views characterize what should or should not be done about climate change, and in the past decades, nations have acted very differently in the face of climate change. This study explores factors that affect individuals' attitudes and concerns towards the environment and how those attitudes ultimately affect climate change policy. One model investigates the link between individual attitudes and countries' actions on climate change, and the results show that attitudes indeed matter in the implementation of policy. Different measures of democracy such as freedom of the press also prove to be important as channels for these attitudes. A second model identifies a number of political, socioeconomic and demographic characteristics that matter for people's attitudes towards climate change.

Development Of Climate Change Information Database And Its Use In Civic Consciousness Enlightenment

GCM outputs such as CMIP3 are available via network access to PCMDI web site. Meteorological researchers are familiar with the usage of the GCM data, but the most of researchers other than meteorology such as agriculture, civil engineering, etc., and general people are not familiar with the GCM. There are some difficulties to use GCM; 1) to download the enormous quantity of data, 2) to understand the GCM methodology, parameters and grids. In order to provide a quick access way to GCM, Climate Change Information Database has been developed. The purpose of the database is to bridge the users and meteorological specialists and to facilitate the understanding the climate changes. The resolution of the data is unified, and climate change amount or factors for each meteorological element are provided from the database. All data in the database are interpolated on the same 80km mesh. Available data are the present-future projections of 27 GCMs, 16 meteorological elements (precipitation, temperature, etc.), 3 emission scenarios (A1B, A2, B1). We showed the summary of this database to residents in Toyama prefecture and measured the effect of showing and grasped the image for the climate change by using the Internet questionary survey. The persons who feel a climate change at the present tend to feel the additional changes in the future. It is important to show the monitoring results of climate change for a citizen and promote the understanding for the climate change that had already occurred. It has been shown that general images for the climate change promote to understand the need of the mitigation, and that it is important to explain about the climate change that might occur in the future even if it did not occur at the present in order to have people recognize widely the need of the adaptation.

Technical change and factor shares

The implications of technical change that directly alters factor shares are examined. Such change can lower the income of some factors of production even when it raises total output, thus offering a possible explanation for episodes of social conflict such as the Luddite uprisings in 19th century England and the recent divergence in the U. S. between wages for skilled and unskilled labor. An explanation also why underdeveloped countries do not adopt the latest technology but continue to use outmoded production methods. Total factor productivity is shown to be a misleading measure of technical progress. Share-altering technical change brings into question the plausibility of a wide class of endogenous growth models.

Human growth, biological maturation, motor performance and contextual factors in Madeira children

The central aims of this study were: (1) to construct age- and gender-specific percentiles for motor coordination (MC), (2) to analyze the change, stability, and prediction of MC, (3) to investigate the relationship between motor performance and body fatness, and (4) to evaluate the relationships between skeletal maturation and fundamental motor skills (FMS) and MC. The data collected was from the ‘Healthy Growth of Madeira Children Study’ and from the ‘Madeira Child Growth Study’. In these studies, MC, FMS, skeletal age, growth characteristics, motor performance, physical activity, socioeconomic status, and geographical area were assessed/measured. Generalized additive models for location, scale and shape, mixed between-within subjects ANOVA, multilevel models, and hierarchical regression (blocks) were some of the statistical procedures used in the analyses. Scores on walking backwards and moving sideways improved with age. It was also found that boys performed better than girls on moving sideways. Normal-weight children outperformed obese peers in almost all gross MC tests. Inter-age correlations were calculated to be between 0.15 and 0.60. Age was associated with a better performance in catching, scramble, speed run, standing long jump, balance, and tennis ball throwing. Body mass index was positively associated with scramble and speed run, and negatively related to the standing long jump. Physical activity was negatively associated with scramble. Semi-urban children displayed better catching skills relative to their urban peers. The standardized residual of skeletal age on chronological age (SAsr) and its interaction with stature and/or body mass accounted for the maximum of 7.0% of variance in FMS and MC over that attributed to body size per se. SAsr alone accounted for a maximum of 9.0% variance in FMS and MC over that attributed to body size per se and interactions between SAsr and body size. This study demonstrates the need to promote FMS, MC, motor performance, and physical activity in children.

Sociodemographic and clinical characteristics, causal factors and evolution of a group of patients with chronic urticaria-angioedema

CONTEXTO E OBJETIVO: Urticária-angioedema crônico é enfermidade freqüente, complexa e multicausal. O objetivo foi estudar as características sociodemográficas, clínicas, os fatores causais, agravantes e a evolução da enfermidade. TIPO DE ESTUDO E LOCAL: Descritivo e prospectivo, realizado no ambulatório de Dermatologia da Faculdade de Medicina de Botucatu, Universidade Estadual Paulista (Unesp). MÉTODOS: Foram avaliados pacientes com diagnóstico de urticária-angioedema crônico através de dados sociodemográficos, anamnese, exames dermatológico, clínico e laboratorial, com ênfase nos fatores causais, agravantes e na evolução da enfermidade. RESULTADOS: 125 pacientes foram incluídos, 95 mulheres e 30 homens. Predominaram mulheres de 30 a 40 anos e homens de 10 a 20 anos. A idade média foi de 35 anos para as mulheres e 32 anos para os homens. Predominaram pacientes de raça branca, residentes em zona urbana e casados. O tempo médio de doença foi de 45,6 meses e de cada lesão foi de 5,6 horas. A metade dos casos tinha surtos diariamente e associação de urticária com angioedema. Não houve horário preferencial de aparecimento dos surtos, mas o noturno foi o horário de piora mais citado. A causa foi esclarecida em 37,6%, predominando as infecções. O estresse foi o agravante mais referido. O tempo médio de acompanhamento foi de 11,7 meses e 60% evoluíram para o controle, 32% melhoraram, 9% mantiveram-se inalterados e um caso piorou. CONCLUSÕES: Urticária-angioedema ocorreu mais em mulheres de meia-idade. A causa foi esclarecida em um terço dos pacientes e metade deles teve controle da doença em aproximadamente um ano.

Muscle delta C-13 change in nile tilapia (Oreochromis niloticus) fingerlings fed lants grain-based diets

The effects of grain-based diets from C3 or C4-cycle plants on muscle delta C-13 change process in Nile tilapia (Oreochromis niloticus) fingerlings were investigated. Two groups of sex reversal males Nile tilapia fingerlings were fed with isoproteic (32.0% DP) and isocaloric (3200 kcal DE/kg) diets, differing from each other by their delta C-13. Muscle samples were collected and the carbon isotopic composition was measured. For C4 diet, the formula for the muscle delta C-13 change related to the intake time of a new diet was delta C-13=- 14.88 - 9.2 1 e(-0.0209t) and the half-life (T) of the muscle carbon was 33.2 days. For C3 diet, the formula was delta C-13 = - 25.43 + 8.59e(-0.0533), with T = 13 days. The C3 diet was considered more appropriate based on its palatability and consequent larger food intake than the C4 diet, resulting in an increased muscle delta C-13 change rate. However, for future studies, would be necessary to mix both the C3 and C4 feedstuffs to formulate diets nutritionally appropriated, with contrasting stable isotopes signatures. Tissue delta C-13 change rate is therefore indicated as a promising tool to better understand the biotic and abiotic factors that influence nutrients utilization from the diet and animal growth. (c) 2006 Elsevier B.V. All rights reserved.

Muscle delta C-13 change in Nile tilapia (Oreochromis niloticus): Effects of growth and carbon turnover

The contribution of growth and turnover to the muscle delta C-13 change process was investigated using mathematical models which associate delta C-13 change to time of intake of a new diet or increase in body mass. Two groups of Nile tilapia (Oreochromis niloticus) were fed on diets based on C3 (sigma C-13 = - 25.64 +/- 0.06 parts per thousand) or C4 (delta C-13= -16.01 +/- 0.06 parts per thousand) photosynthetic cycle plants to standardize the muscle delta C-13. After establishing the carbon isotopic equilibrium, fish (mean mass 24.12 +/- 6.79 g) then received the other treatment diet until a new carbon isotopic equilibrium could be established, characterizing T1 (C3-C4) and T2 (C4-C3) treatments. No significant differences were observed in fish productive performance. Good fits were obtained for the models that associated the delta C-13 change to time, resulting in carbon half-life values of 23.33 days for T1 and 25.96 days for T2. Based on values found for the muscle delta C-13 change rate from growth (0.0263 day(-1) and 0.0254 day(-1)) and turnover (0.0034 day(-1) and 0.0013 day(-1)), our results indicate that most of the delta C-13 change could be attributed to growth. The application of model that associated the delta C-13 change to body mass increase seems to produce results with no apparent biological explanation. The delta C-13 change rate could directly reflect the daily ration and growth rate, and consequently the isotopic change rates of carbon and other tissue elements can be properly used to assess different factors that may interfere in nutrient utilization and growth. (c) 2006 Published by Elsevier B.V.

Are large-scale distributional shifts of the blue-winged macaw (Primolius maracana) related to climate change?

Aim To evaluate whether observed geographical shifts in the distribution of the blue-winged macaw (Primolius maracana) are related to ongoing processes of global climate change. This species is vulnerable to extinction and has shown striking range retractions in recent decades, withdrawing broadly from southern portions of its historical distribution. Its range reduction has generally been attributed to the effects of habitat loss; however, as this species has also disappeared from large forested areas, consideration of other factors that may act in concert is merited.Location Historical distribution of the blue-winged macaw in Brazil, eastern Paraguay and northern Argentina.Methods We used a correlative approach to test a hypothesis of causation of observed shifts by reduction of habitable areas mediated by climate change. We developed models of the ecological niche requirements of the blue-winged macaw, based on point-occurrence data and climate scenarios for pre-1950 and post-1950 periods, and tested model predictivity for anticipating geographical distributions within time periods. Then we projected each model to the other time period and compared distributions predicted under both climate scenarios to assess shifts of habitable areas across decades and to evaluate an explanation for observed range retractions.Results Differences between predicted distributions of the blue-winged macaw over the twentieth century were, in general, minor and no change in suitability of landscapes was predicted across large areas of the species' original range in different time periods. No tendency towards range retraction in the south was predicted, rather conditions in the southern part of the species' range tended to show improvement for the species.Main conclusions Our test permitted elimination of climate change as a likely explanation for the observed shifts in the distribution of the blue-winged macaw, and points rather to other causal explanations (e.g. changing regional land use, emerging diseases).

Effect of a heat-treatment on the linear dimensional change of a hard chairside reline resin

Statement of problem. Little data are available regarding the effect of heat-treatments on the dimensional stability of hard chairside reline resins. Purpose. The objective of this in vitro study was to evaluate whether a heat-treatment improves the dimensional stability of the reline resin Duraliner II and to compare the linear dimensional changes of this material with the heat-polymerized acrylic resin Lucitone 550. Material and methods. The materials were mixed according to the manufacturer's instructions and packed into a stainless steel split mold (50.0 mm diameter and 0.5 mm thickness) with reference points (A, B, C, and D). Duraliner II specimens were polymerized for 12 minutes in water at 37°C and bench cooled to room temperature before being removed from the mold. Twelve specimens were made and divided into 2 groups: group 1 specimens (n=6) were left untreated, and group 2 specimens (n=6) were submitted to a heat-treatment in a water bath at 55°C for 10 minutes and then bench cooled to room temperature. The 6 Lucitone specimens (control group) were polymerized in a water bath for 9 hours at 71°C. The specimens were removed after the mold reached the room temperature. A Nikon optical comparator was used to measure the distances between the reference points (AB and CD) on the stainless steel mold (baseline readings) and on the specimens to the nearest 0.001 mm. Measurements were made after processing and after the specimens had been stored in distilled water at 37°C for 8 different periods of time. Data were subjected to analysis of variance with repeated measures, followed by Tukey's multiple comparison test (P<.05). Results. All specimens exhibited shrinkage after processing (control, -0.41%; group 1, -0.26%; and group 2, -0.51%). Group 1 specimens showed greater shrinkage (-1.23%) than the control (-0.23%) and group 2 (-0.81%) specimens after 60 days of storage in water (P<.05). Conclusion. Within the limitations of this study, a significant improvement of the long-term dimensional stability of the Duraliner II reline resin was observed when the specimens were heat-treated. However, the shrinkage remained considerably higher than the denture base resin Lucitone 550. Copyright © 2002 by The Editorial Council of The Journal of Prosthetic Dentistry.

Evaluation of dimensional change and detail reproduction in silicones for facial prostheses.

The aim of this study was to evaluate the dimensional stability and detail reproduction of two silicones used for facial prosthesis, under the influence of chemical disinfection and storage time. Twenty-eight test specimens were obtained, half made of Silastic MDX 4-4210 silicone, and the other half of Silastic 732 RTV silicone. The test specimens were divided into 4 groups: Silastic 732 RTV and Silastic MDX 4-4210, with disinfection 3 times a week with Efferdent and without disinfection. Dimensional change was analyzed using an electronic comparison microscope and detail reproduction was observed under a stereo microscope, immediately and 2 months after the test specimens were made. Once the results were obtained, an analisis of variance (ANOVA) was applied, followed by the Tukey's Test with 1% confidence. The storage time factor had a statistical influence on dimensional stability: Silastic MDX 4-4210 had less contraction than Silastic 732 RTV. Chemical disinfection did not significantly alter the dimensional stability of the materials used. Regarding detail reproduction, no alteration of values was observed in any of the materials analyzed, regardless of storage period or disinfection.

Evaluation of hardness and colour change of soft liners after accelerated ageing.

INTRODUCTION: Soft liners have been developed to offer comfort to denture wearers. However, this comfort is compromised when there is a change in the properties of the material, causing colour change, solubility, absorption and hardening. These characteristics can compromise the longevity of soft liners. AIM: The aim of this in vitro study was to investigate the effect of ageing on both the hardness and colour change of two soft liners following accelerated ageing. METHODS: Two denture liners, one resin based (Trusoft, Bosworth, Illinois, USA) and one silicone based (Ufi Gel P, Voco GMBH, Cuxhaven, Germany), were tested in this study for both hardness (using the Shore A scale) and colour change (using the CIE L*a*b* colour scale), initially and after 1008 hours (6 weeks) of accelerated ageing. Statistical analysis was performed using the unpaired t-test with the Welch correction. RESULTS: These indicated that both materials increased in hardness and underwent colour change after accelerated ageing. The initial hardness of Trusoft was far lower than that of Ufi Gel P (18.2 Shore A units vs 34.8 Shore A units). However, for Trusoft the changes for both hardness (from 18.2 to 52.1 Shore A units) and colour change (16.85 on the CIE L*a*b* colour scale) were greater than those for Ufi Gel P, for which hardness changed from 34.8 to 36.5 Shore A units and the colour change was 5.19 on the CIE L*a*b* colour scale. CONCLUSIONS: Ufi Gel P underwent less hardness and colour change after accelerated ageing than Trusoft. On the other hand, the use of Trusoft may be preferable in cases where initial softness is a major consideration, such as when relining an immediate denture after implant surgery.

Structural change and productivity growth, 20 years later: old problems, new opportunities

Includes bibliography