Reinforcing and expanding the predictions of the disturbance vicariance hypothesis in Amazonian harlequin frogs: A molecular phylogenetic and climate envelope modelling approach

The disturbance vicariance hypothesis (DV) has been proposed to explain speciation in Amazonia, especially its edge regions, e. g. in eastern Guiana Shield harlequin frogs (Atelopus) which are suggested to have derived from a cool-adapted Andean ancestor. In concordance with DV predictions we studied that (i) these amphibians display a natural distribution gap in central Amazonia; (ii) east of this gap they constitute a monophyletic lineage which is nested within a pre-Andean/western clade; (iii) climate envelopes of Atelopus west and east of the distribution gap show some macroclimatic divergence due to a regional climate envelope shift; (iv) geographic distributions of climate envelopes of western and eastern Atelopus range into central Amazonia but with limited spatial overlap. We tested if presence and apparent absence data points of Atelopus were homogenously distributed with Ripley's K function. A molecular phylogeny (mitochondrial 16S rRNA gene) was reconstructed using Maximum Likelihood and Bayesian Inference to study if Guianan Atelopus constitute a clade nested within a larger genus phylogeny. We focused on climate envelope divergence and geographic distribution by computing climatic envelope models with MaxEnt based on macroscale bioclimatic parameters and testing them by using Schoener's index and modified Hellinger distance. We corroborated existing DV predictions and, for the first time, formulated new DV predictions aiming on species' climate envelope change. Our results suggest that cool-adapted Andean Atelopus ancestors had dispersed into the Amazon basin and further onto the eastern Guiana Shield where, under warm conditions, they were forced to change climate envelopes. © 2010 The Author(s).

Simple green approach to reinforce natural rubber with bacterial cellulose nanofibers

Natural rubber (NR) is a renewable polymer with a wide range of applications, which is constantly tailored, further increasing its utilizations. The tensile strength is one of its most important properties susceptible of being enhanced by the simple incorporation of nanofibers. The preparation and characterization of natural-rubber based nanocomposites reinforced with bacterial cellulose (BC) and bacterial cellulose coated with polystyrene (BCPS), yielded high performance materials. The nanocomposites were prepared by a simple and green process, and characterized by tensile tests, dynamical mechanical analysis (DMA), scanning electron microscopy (SEM), and swelling experiments. The effect of the nanofiber content on morphology, static, and dynamic mechanical properties was also investigated. The results showed an increase in the mechanical properties, such as Young's modulus and tensile strength, even with modest nanofiber loadings. © 2013 American Chemical Society.

Comparison of the accuracy for three dental impression techniques and index: An in vitro study

Objectives: This in vitro study compared the dimensional accuracy of stone index (I) and three impression techniques: tapered impression copings (T), squared impression copings (S) and modified squared impression copings (MS) for implant-supported prostheses. Methods: A master cast, with four parallel implant abutment analogs and a passive framework, were fabricated. Vinyl polysiloxane impression material was used for all impressions with two metal stock trays (open and closed tray). Four groups (I, T, S and MS) were tested (n = 5). A metallic framework was seated on each of the casts, one abutment screw was tightened, and the gap between the analog of implant and the framework was measured with a stereomicroscope. The groups' measurements (80 gap values) were analyzed using software (LeicaQWin - Leica Imaging Systems Ltd.) that received the images of a video camera coupled to a Leica stereomicroscope at 100× magnification. The results were statistically analyzed with Kruskal-Wallis One Way ANOVA on Ranks test followed by Dunn's Method, 0.05. Results: The mean values of abutment/framework interface gaps were: Master Cast = 32 μm (SD 2); Group I = 45 μm (SD 3); Group T = 78 μm (SD 25); Group S = 134 μm (SD 30); Group MS = 143 μm (SD 27). No significant difference was detected among Index and Master Cast (P = .05). Conclusion: Under the limitations of this study, it could be suggested that a more accurate working cast is possible using tapered impression copings techniques and stone index. © 2013 Japan Prosthodontic Society.

Assessment of the damage caused by flood rains and landslides in association with hurricane Michelle, october 2001: implications for economic, social and environmental development

Preface This study was prepared for the Government of Jamaica following the significant physical damage and economic losses that the country sustained as a result of flood rains associated with the development of Hurricane Michelle. The Planning Institute of Jamaica (PIOJ) submitted a request for assistance in undertaking a social, environmental and economic impact assessment to the Economic Commission for Latin America and the Caribbean (ECLAC) on 14 November 2001. ECLAC responded with haste and modified its work plan to accommodate the request. A request for training in the use of the ECLAC Methodology to be delivered to personnel in Jamaica was deferred until the first quarter of 2002, as it was impossible to mount such an initiative at such short notice. This appraisal considers the consequences of the three instances of heavy rainfall that brought on the severe flooding and loss of property and livelihoods. The study was prepared by three members of the ECLAC Natural Disaster Damage Assessment Team over a period of one week in order to comply with the request that it be presented to the Prime Minister on 3 December 2001. The team has endeavoured to complete a workload that would take two weeks with a team of 15 members working assiduously with data already prepared in preliminary form by the national emergency stakeholders. There is need for training in disaster assessment as evidenced by the data collected by the Jamaican officials engaged in the exercise. Their efforts in the future will be more focused and productive after they have received training in the use of the ECLAC Methodology. This study undertakes a sectoral analysis leading to an overall assessment of the damage. It appraises the macroeconomic and social effects and proposes some guidelines for action including mitigating actions subsequent to the devastation caused by the weather system. The team is grateful for the efforts of the Office of Disaster Preparedness and Emergency Management (ODPEM), the associated government ministries and agencies, the Statistical Institute of Jamaica (STATIN), the Planning Institute of Jamaica and the Inter American Development Bank (IDB) for assistance rendered to the team. Indeed, it is the recommendation of the team that STATIN is poised to play a pivotal role in any disaster damage assessment and should be taken on board in that regard. The direct and indirect damages have been assessed in accordance with the methodology developed by ECLAC (1). The results presented are based on the mission's estimates. The study incorporates the information made available to the team and evidence collected in interviews and visits to affected locations. It is estimated that the magnitude of the losses exceeds the country's capacity to address reparations and mitigation without serious dislocation of its development trajectory. The government may wish to approach the international community for assistance in this regard. This appraisal is therefore designed to provide the government and the international community with guidelines for setting national and regional priorities in rehabilitation and reconstruction or resettlement programmes. A purely economic conception of the problem would be limited. A more integrated approach would have a human face and consider the alleviation of human suffering in the affected areas while attending to the economic and fiscal fallout of the disaster. Questions of improved physical planning, watershed management, early warning, emergency response and structural preparedness for evacuation and sheltering the vulnerable population are seen as important considerations for the post disaster phase. Special attention and priority should be placed on including sustainability and increased governance criteria in making social and productive investments, and on allocating resources to the reinforcing and retrofitting of vulnerable infrastructure, basic lifelines and services as part of the reconstruction and rehabilitation strategy. The Jamaican society and government face the opportunity of undertaking action with the benefit of revised paradigms, embarking on institutional, legal and structural reforms to reduce economic, social and environmental vulnerability. The history of flood devastation in the very areas of Portland and St. Mary shows a recurrence of flooding. Accounts of flooding from the earliest recorded accounts pertaining to 1837 are available. Recurrences in 1937, 1940, 1943 and 2001 indicate an ever-present probability of recurrence of similar events. The Government may wish to consider the probable consequences of a part of its population living in flood plains and address its position vis-à­¶is land use and the probability of yet another recurrence of flood rains. (1) ECLAC/IDNDR, Manual for estimating the Socio-Economic Effects of Natural Disasters, May,1999.

Síntese, caracterização e aplicação de celulose funcionalizada com o ligante P-aminobenzóico em pré- concentração de íons metálicos

Pós-graduação em Química - IQ

Utilização de carboidratos digestíveis em dietas para pacu, Piaractus mesopotamicus (Holmberg, 1887)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Immunodetection of Helicobacter sp. and the associated expression of ABO blood group antigens in the gastric mucosa of captive and free-living New World primates in the Amazon region

The histo-blood group ABH antigens were first described in humans. These antigens are only present on erythrocytes from great apes and humans, while in more primitive animals they are found in tissues and body fluids. The ABH antigens are mainly distributed in tissues exposed to the external environment and potentially serve as ligands for pathogens or inhibitors of tissue connections. The objective of this paper was two-fold: (i) to determine the presence of Helicobacter sp. in the gastric mucosa of 16 captive and 24 free-living New World monkeys and (ii) to evaluate the presence of histopathological alterations related to bacterial infection and the associated expression of ABH antigens in the tissue. Stomach tissues from 13 species of monkey were assessed using haematoxylin-eosin and modified Gram staining (Hucker) methods. An immunohistochemical analysis of the tissue revealed the presence of infectious bacteria that were characteristic of the genus Helicobacter sp. The results demonstrate that various species of monkey might be naturally infected with the Helicobacter sp. and that there is an increased susceptibility to infection. This study serves as a comparative analysis of infection between human and non-human primates and indicates the presence of a new species of Helicobacter.

Desenvolvimento de novos procedimentos analíticos para diferenciação in situ de espécies lábeis e inertes em sistemas aquáticos e para especiação de Cu(II) e Pb(II) complexados com nanopartículas de sílica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ability of Salmonella spp. to Produce Biofilm Is Dependent on Temperature and Surface Material

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mineralization of poly(epsilon-caprolactone)/adipate modified starch blend in agricultural soil

The biodegradability properties of poly(epsilon-caprolactone) (PCL) and modified adipate-starch (AS) blends, using Edenol-3203 (E) as a starch plasticizer, were investigated in laboratory by burial tests of the samples in previously analyzed agricultural soil. The biodegradation process was carried out using the respirometric test according to ASTM D 5988-96, and the mineralization was followed by both variables such as carbon dioxide evolution and mass loss. The results indicated that the presence of AS-E accelerated the biodegradation rate as expected.

In vitro and in vivo acaricide action of juvenoid analogs produced from the chemical modification of Cymbopogon spp. and Corymbia citriodora essential oil on the cattle tick Rhipicephalus (Boophilus) microplus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de polpa solúvel a partir de Eucalyptus urograndis

The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution

Purpose: To evaluate the influence of the geometry and design of prosthetic crown preparations on stress distribution in compression tests, using finite element analysis (FEA). Materials and Methods: Six combinations of 3D drawings of all-ceramic crowns (yttria-stabilized zirconia framework and porcelain veneer) were evaluated: F, flat preparation and simplified crown; FC, flat preparation and crown with contact point; FCM, flat preparation and modified crown; A, anatomical preparation and simplified anatomical crown framework; AC, anatomical preparation and crown with contact point; and ACM, anatomical preparation and modified crown. Bonded contact types at all interfaces with the mesh were assigned, and the material properties used were according to the literature. A 200 N vertical load was applied at the center of each model. The maximum principal stresses were quantitatively and qualitatively analyzed. Results: The highest values of tensile stress were observed at the interface between the ceramics in the region under the load application for the simplified models (F and A). Reductions in stress values were observed for the model with the anatomical preparation and modified infrastructure (ACM). The stress distribution in the flat models was similar to that of their respective anatomical models. Conclusions: The modified design of the zirconia coping reduces the stress concentration at the interface with the veneer ceramic, and the simplified preparation can exert a stress distribution similar to that of the anatomical preparation at and near the load point, when load is applied to the center of the crown.

Optimal control strategy for fed-batch enzymatic hydrolysis of lignocellulosic biomass based on epidemic modeling

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Coinfection by toxoplasma gondii and leishmania spp. in domestic cats (Felis catus) in State of Mato Grosso do Sul

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)