Design and construction of an ultrasonic probe for use in a Cryo-Magnet NMR Spectrometer

SINNMR (Sonically Induced Narrowing of the Nuclear Magnetic Resonance spectra of solids), is a novel technique that is being developed to enable the routine study of solids by nuclear magnetic resonance spectroscopy. SINNMR aims to narrow the broad resonances that are characteristic of solid state NMR by inducing rapid incoherent motion of solid particles suspended in a support medium, using high frequency ultrasound in the range 2-10 MHz. The width of the normal broad resonances from solids are due to incomplete averaging of several components of the total spin Hamiltonian caused by restrictions placed on molecular motion within a solid. At present Magic Angle Spinning (MAS) NMR is the classical solid state technique used to reduce line broadening, but: this has associated problems, not least of which is the appearance of many spinning side bands which confuse the spectra. It is hoped that SlNNMR will offer a simple alternative, particularly as it does not reveal spinning sidebands The fundamental question concerning whether the use of ultrasound within a cryo-magnet will cause quenching has been investigated with success, as even under the most extreme conditions of power, frequency and irradiator time, the magnet does not quench. The objective of this work is to design and construct a SINNMR probe for use in a super conducting cryo-magnet NMR spectrometer. A cell for such a probe has been constructed and incorporated into an adapted high resolution broadband probe. It has been proved that the cell is capable of causing cavitation, up to 10 MHz, by running a series of ultrasonic reactions within it and observing the reaction products. It was found that the ultrasound was causing the sample to be heated to unacceptable temperatures and this necessitated the incorporation of temperature stabilisation devices. Work has been performed on the investigation of the narrowing of the solid state 23Na spectrum of tri-sodium phosphate using high frequency ultrasound. Work has also been completed on the signal enhancement and T1 reduction of a liquid mixture and a pure compound using ultrasound. Some preliminary "bench" experiments have been completed on a novel ultrasonic device designed to help minimise sample heating. The concept involves passing the ultrasound through a temperature stabilised, liquid filled funnel that has a drum skin on the end that will enable the passage of ultrasound into the sample. Bench experiments have proved that acoustic attenuation is low and that cavitation in the liquid beyond the device is still possible.

Design, modeling and construction of a novel ablative fast pyrolysis reactor and product collection system

The objective of this work was to design, construct and commission a new ablative pyrolysis reactor and a high efficiency product collection system. The reactor was to have a nominal throughput of 10 kg/11r of dry biomass and be inherently scalable up to an industrial scale application of 10 tones/hr. The whole process consists of a bladed ablative pyrolysis reactor, two high efficiency cyclones for char removal and a disk and doughnut quench column combined with a wet walled electrostatic precipitator, which is directly mounted on top, for liquids collection. In order to aid design and scale-up calculations, detailed mathematical modelling was undertaken of the reaction system enabling sizes, efficiencies and operating conditions to be determined. Specifically, a modular approach was taken due to the iterative nature of some of the design methodologies, with the output from one module being the input to the next. Separate modules were developed for the determination of the biomass ablation rate, specification of the reactor capacity, cyclone design, quench column design and electrostatic precipitator design. These models enabled a rigorous design protocol to be developed capable of specifying the required reactor and product collection system size for specified biomass throughputs, operating conditions and collection efficiencies. The reactor proved capable of generating an ablation rate of 0.63 mm/s for pine wood at a temperature of 525 'DC with a relative velocity between the heated surface and reacting biomass particle of 12.1 m/s. The reactor achieved a maximum throughput of 2.3 kg/hr, which was the maximum the biomass feeder could supply. The reactor is capable of being operated at a far higher throughput but this would require a new feeder and drive motor to be purchased. Modelling showed that the reactor is capable of achieving a reactor throughput of approximately 30 kg/hr. This is an area that should be considered for the future as the reactor is currently operating well below its theoretical maximum. Calculations show that the current product collection system could operate efficiently up to a maximum feed rate of 10 kg/Fir, provided the inert gas supply was adjusted accordingly to keep the vapour residence time in the electrostatic precipitator above one second. Operation above 10 kg/hr would require some modifications to the product collection system. Eight experimental runs were documented and considered successful, more were attempted but due to equipment failure had to be abandoned. This does not detract from the fact that the reactor and product collection system design was extremely efficient. The maximum total liquid yield was 64.9 % liquid yields on a dry wood fed basis. It is considered that the liquid yield would have been higher had there been sufficient development time to overcome certain operational difficulties and if longer operating runs had been attempted to offset product losses occurring due to the difficulties in collecting all available product from a large scale collection unit. The liquids collection system was highly efficient and modeling determined a liquid collection efficiency of above 99% on a mass basis. This was validated due to the fact that a dry ice/acetone condenser and a cotton wool filter downstream of the collection unit enabled mass measurements of the amount of condensable product exiting the product collection unit. This showed that the collection efficiency was in excess of 99% on a mass basis.

Extreme weather events and construction SMEs:vulnerability, impacts and responses

Purpose – The UK experienced a number of Extreme Weather Events (EWEs) during recent years and a significant number of businesses were affected as a result. With the intensity and frequency of weather extremes predicted in the future, enhancing the resilience of businesses, especially of Small and Medium-sized Enterprises (SMEs), who are considered as highly vulnerable, has become a necessity. However, little research has been undertaken on how construction SMEs respond to the risk of EWEs. In seeking to help address this dearth of research, this investigation sought to identify how construction SMEs were being affected by EWEs and the coping strategies being used. Design/methodology/approach – A mixed methods research design was adopted to elicit information from construction SMEs, involving a questionnaire survey and case study approach. Findings – Results indicate a lack of coping strategies among the construction SMEs studied. Where the coping strategies have been implemented, these were found to be extensions of their existing risk management strategies rather than radical measures specifically addressing EWEs. Research limitations/implications – The exploratory survey focused on the Greater London area and was limited to a relatively small sample size. This limitation is overcome by conducting detailed case studies utilising two SMEs whose projects were located in EWE prone localities. The mixed method research design adopted benefits the research by presenting more robust findings. Practical implications – A better way of integrating the potential of EWEs into the initial project planning stage is required by the SMEs. This could possibly be achieved through a better risk assessment model supported by better EWE prediction data. Originality/value – The paper provides an original contribution towards the overarching agenda of resilience of SMEs and policy making in the area of EWE risk management. It informs both policy makers and practitioners on issues of planning and preparedness against EWEs.

Climate change and construction sector SMEs:vulnerability, consequences and resilience

Climate change has become one of the prime challenges the society has to face in the future. As far as businesses are concerned, it also has added one other important issue that they have to consider as part of their business planning. Climate change is of significant importance particularly to the Small and Medium-sized enterprises (SMEs), which are considered as the most vulnerable among the business community to the effects of climate change. This paper presents the findings of a literature review conducted with the aim of identifying the specific importance of climate change to the construction sector SMEs. The objectives of the paper are to identify the vulnerability of construction sector SMEs to the effects of climate change, their consequences and also to identify the importance of improving resilience and implementing adaptive measures to manage these issues. The paper also outlines the directions of a study undertaken to address these issues as part of an EPSRC funded research project titled “Community Resilience to Extreme Weather Events – CREW”. The paper concludes by stressing the importance of improving the resilience of construction sector SMEs to climate change effects and also the importance of collective action in this regard.

The East-Central European new donors:mapping capacity building and remaining challenges

In the past decade, the East-Central European countries were provided significant external capacity building assistance to help their emergence as donors of foreign aid. This paper aims to map these capacity development programmes and identify where they have helped and what challenges remain for the new donors. The main conclusion is that although capacity building has been instrumental in building organisational structures, working procedures and training staff, deeper underlying problems such as low levels of financing, lacking political will, the need for visibility and low staff numbers continue to hinder the new international development policies. Copyright © 2013 John Wiley & Sons, Ltd.

The East-Central European new donors: mapping capacity building and remaining challenges

In the past decade, the East-Central European countries were provided significant external capacity building assistance in order to help their emergence as donors of foreign aid. This paper aims to map these capacity development programs and identify where they have helped and what challenges remain for the new donors. The main conclusion is that while capacity building has been instrumental in building organizational structures, working procedures and training staff, deeper underlying problems such as low levels of financing, lacking political will, the need for visibility and low staff numbers continue to hinder the new international development policies.

Outdoor experiential team -building and the college adjustment and persistence of freshmen in learning communities

Student retention is a primary goal in all higher education institutions. Students who are more adjusted to college life are more likely to persist. The purpose of this research was to determine the effects of an outdoor experiential team-building program on the college adjustment of first-semester freshmen in learning communities at a diverse, urban university. The participants in this quasi-experimental study were first-semester freshmen enrolled in learning communities. A total of 123 students participated, with 61 students in the experimental group and 62 students in the comparison group. There were no significant differences between the two groups in relation to age, gender, or ethnicity. The students in the experimental group participated in the team-building program, which consisted of three events spaced three and four weeks apart. At the end of the semester, students in both the experimental and comparison groups completed the Student Adaptation to College Questionnaire (SACQ), a 67-item self-report survey. ^ Independent samples t-test of the SACQ scores (for attachment to the institution, social adjustment, and overall adaptation to college) between groups was done, and the analyses revealed no statistically significant differences. Chi-square analyses revealed no significant difference in the enrollment pattern between the two groups over a four-year period. Repeated measures ANOVAs revealed that from the first semester of enrollment to the second semester there was a significant drop in GPA for students from the comparison group and no such drop in GPA for students from the experimental group who had participated in at least two of the team building activities. A repeated measures ANOVA was conducted for the first year by semester and ethnicity. No ethnic differences were found, and no interaction was found by ethnicity and semester. ^ Should colleges and universities continue to utilize outdoor experiential team-building programs as a creative way to influence students' connection to the institution they should further investigate its value on students' adjustment to college. Future studies should also consider other variables influenced by team-building programs that affect students' college adjustment, such as collaborative learning. Faculty should be included in the planning process to increase their participation. ^

Design and construction of a portable force-reflecting manual controller for teleoperation systems

A man-machine system called teleoperator system has been developed to work in hazardous environments such as nuclear reactor plants. Force reflection is a type of force feedback in which forces experienced by the remote manipulator are fed back to the manual controller. In a force-reflecting teleoperation system, the operator uses the manual controller to direct the remote manipulator and receives visual information from a video image and/or graphical animation on the computer screen. This thesis presents the design of a portable Force-Reflecting Manual Controller (FRMC) for the teleoperation of tasks such as hazardous material handling, waste cleanup, and space-related operations. The work consists of the design and construction of a prototype 1-Degree-of-Freedom (DOF) FRMC, the development of the Graphical User Interface (GUI), and system integration. Two control strategies - PID and fuzzy logic controllers are developed and experimentally tested. The system response of each is analyzed and evaluated. In addition, the concept of a telesensation system is introduced, and a variety of design alternatives of a 3-DOF FRMC are proposed for future development.

Essays on State-Building and Sectarian Violence

\abstract

This dissertation seeks to explain the role of governmental and non-governmental actors in increasing/reducing the emergence of intergroup conflict after war, when group differences have been a salient aspect of group mobilization. This question emerges from several interrelated branches of scholarship on self-enforcing institutions and power-sharing arrangements, group fragmentation and demographic change, collective mobilization for collectively-targeted violence, and conflict termination and the post-conflict quality of peace. This question is investigated through quantitative analyses performed at the sub-national, national, and cross-national level on the effect of elite competition on the likelihood of violence committed on the basis of group difference after war. These quantitative analyses are each accompanied by qualitative, case study analyses drawn from the American Reconstruction South, Iraq, and Cote d'Ivoire that illustrate and clarify the mechanisms evaluated through quantitative analysis.

Shared findings suggest the correlation of reduced political competition with the increased likelihood of violence committed on the basis of group difference. Separate findings shed light on how covariates related to control over rent extraction and armed forces, decentralization, and citizenship can lead to a reduction in violence. However, these same quantitative analyses and case study analysis suggest that the control of the state can be perceived as a threat after the end of conflict. Further, together these findings suggest the political nature of violence committed on the basis of group difference as opposed to ethnic identity or resource scarcity alone.

Together, these combined analyses shed light on how and why political identities are formed and mobilized for the purpose of committing political violence after war. In this sense, they shed light on the factors that constrain post-conflict violence in deeply divided societies, and contribute to relevant academic, policy, and normative questions.

The geographies of encounter: investigating the spatiality and construction of 'meaningful' encounters with difference through the experiences of international students at University College Cork, Ireland

The purpose of this research is to investigate how international students negotiate encounters with Irish students and construct ‘meaning’ from those encounters in the spaces of the university and city. As cities are increasingly characterised by a multiplexity of diversity, the issue of living with difference is becoming more and more pertinent. In the wake of escalating socio-spatial polarisation, inter-cultural tension, racism, and xenophobia, the geographies of encounter seek to untangle the interactions that occur in the quotidian activities and spaces of everyday life to determine whether such encounters might reduce prejudice, antipathy and indifference and establish common social bonds (Amin 2002; Valentine 2008). Thus far, the literature has investigated a number of sites of encounter; public space, the home, neighbourhoods, schools, sports clubs, public transport, cafes and libraries (Wilson 2011; Schuermans 2013; Hemming 2011; Neal and Vincent 2011; Mayblin, Valentine and Anderrson 2015; Laurier and Philo 2006; Valentine and Sadgrove 2013; Harris, Valentine and Piekut 2014; Fincher and Iveson 2008). While these spaces produce a range of outcomes, the literature remains frustrated by a lack of clarity of what constitutes a ‘meaningful’ encounter and how such encounters might be planned for. Drawing on survey and interview data with full-time international students at University College Cork, Ireland, this study contributes to understanding how encounters are shaped by the construction and reproduction of particular identities in particular spaces, imbuing spaces with uneven power frameworks that produce diverse outcomes. Rather than identifying a singular ‘meaningful’ outcome of encounter as a potential panacea to the issues of exclusion and oppression, the contention here is to recognise a range of outcomes that are created by individuals in a range of ways. To define one outcome of encounter as ‘meaningful’ is to overlook the scale of intensity of diverse interactions and the multiplicity of ways in which people learn to live with difference.