933 resultados para auto-pilot system
Resumo:
We show that inserting pilot tones with frequency intervals inversely proportional to the subcarrier index exhibits greatly improved dispersion estimation performance when compared to the equal spacing design in optical fast orthogonal frequency division multiplexing (F-OFDM). With the proposed design, a 20-Gbit/s four amplitude shift keying optical F-OFDM system with 840-km transmission without optical dispersion compensation is experimentally demonstrated. It is shown that a single F-OFDM symbol with six pilot tones can achieve near-optimal estimation performance for the 840-km dispersion. This is in contrast to the minimum of ten pilot tones using an equal spacing design with either cubic or Fourier-transform-based interpolation. © 2013 Elsevier B.V. All rights reserved.
Resumo:
In this letter, a novel phase noise estimation scheme has been proposed for coherent optical orthogonal frequency division multiplexing systems, the quasi-pilot-aided method. In this method, the phases of transmitted pilot subcarriers are deliberately correlated to the phases of data subcarriers. Accounting for this correlation in the receiver allows the required number of pilots needed for a sufficient estimation and compensation of phase noise to be reduced by a factor of 2 in comparison with the traditional pilot-aided phase noise estimation method. We carried out numerical simulation of a 40 Gb/s single polarization transmission system, and the outcome of the investigation indicates that by applying quasi-pilot-aided phase estimation, only four pilot subcarriers are needed for effective phase noise compensation. © 2014 IEEE.
Resumo:
We propose - as a modification of the optical (RF) pilot scheme -a balanced phase modulation between two polarizations of the optical signal in order to generate correlated equalization enhanced phase noise (EEPN) contributions in the two polarizations. The method is applicable for n-level PSK system. The EEPN can be compensated, the carrier phase extracted and the nPSK signal regenerated by complex conjugation and multiplication in the receiver. The method is tested by system simulations in a single channel QPSK system at 56 Gb/s system rate. It is found that the conjugation and multiplication scheme in the Rx can mitigate the EEPN to within 1/2 orders of magnitude. Results are compared to using the Viterbi-Viterbi algorithm to mitigate the EEPN. The latter method improves the sensitivity more than two orders of magnitude. Important novel insight into the statistical properties of EEPN is identified and discussed in the paper. © 2013 Optical Society of America.
Resumo:
At present in the educational process of electrical engineering disciplines electronic learning program, providing control over reproductive educational-cognitive activity (the decision of standard problems) and universal modeling program systems, for instance Electronics Workbench, giving a chance of organizing productive, in particular research activity are basically used. However universal modeling program systems can not provide auto control over educational-cognitive activity because of the absence of the feedback with students. The combined didactic interactive program system, providing the closed directed auto control over both the reproductive and productive heuristic educational-cognitive activity of the student is offered.
Resumo:
Current state of Russian databases for substances and materials properties was considered. A brief review of integration methods of given information systems was prepared and a distributed databases integration approach based on metabase was proposed. Implementation details were mentioned on the posed database on electronics materials integration approach. An operating pilot version of given integrated information system implemented at IMET RAS was considered.
Resumo:
Background: Remote, non-invasive and objective tests that can be used to support expert diagnosis for Parkinson's disease (PD) are lacking. Methods: Participants underwent baseline in-clinic assessments, including the Unified Parkinson's Disease Rating Scale (UPDRS), and were provided smartphones with an Android operating system that contained a smartphone application that assessed voice, posture, gait, finger tapping, and response time. Participants then took the smart phones home to perform the five tasks four times a day for a month. Once a week participants had a remote (telemedicine) visit with a Parkinson disease specialist in which a modified (excluding assessments of rigidity and balance) UPDRS performed. Using statistical analyses of the five tasks recorded using the smartphone from 10 individuals with PD and 10 controls, we sought to: (1) discriminate whether the participant had PD and (2) predict the modified motor portion of the UPDRS. Results: Twenty participants performed an average of 2.7 tests per day (68.9% adherence) for the study duration (average of 34.4 days) in a home and community setting. The analyses of the five tasks differed between those with Parkinson disease and those without. In discriminating participants with PD from controls, the mean sensitivity was 96.2% (SD 2%) and mean specificity was 96.9% (SD 1.9%). The mean error in predicting the modified motor component of the UPDRS (range 11-34) was 1.26 UPDRS points (SD 0.16). Conclusion: Measuring PD symptoms via a smartphone is feasible and has potential value as a diagnostic support tool.
Resumo:
We propose a Wiener-Hammerstein (W-H) channel estimation algorithm for Long-Term Evolution (LTE) systems. The LTE standard provides known data as pilot symbols and exploits them through coherent detection to improve system performance. These drivers are placed in a hybrid way to cover up both time and frequency domain. Our aim is to adapt the W-H equalizer (W-H/E) to LTE standard for compensation of both linear and nonlinear effects induced by power amplifiers and multipath channels. We evaluate the performance of the W-H/E for a Downlink LTE system in terms of BLER, EVM and Throughput versus SNR. Afterwards, we compare the results with a traditional Least-Mean Square (LMS) equalizer. It is shown that W-H/E can significantly reduce both linear and nonlinear distortions compared to LMS and improve LTE Downlink system performance.
Resumo:
Hospitalization can be a very stressful experience, especially for children. With the use of technology, Intranet communication can be successful in obtaining interaction that these individuals lack to accomplish a positive adjustment to the hospital setting. The purpose of this exploratory, pilot project is to examine the use of networking chronically ill, hospitalized children with other hospitalized chronically ill children through Intranet communication.^ A target population of chronically ill hospitalized children, in at least Piaget's concrete operational stage, was asked to use the Intranet system to network with other chronically ill hospitalized children during their hospital stay, for one month or until discharge. The length of time of usage was recorded on a log sheet, and questionnaires were filled out at the end of the study.^ Statistical analysis was utilized to determine frequency of network usage, duration, demographics, and the impact on hospitalization. Results indicated that Intranet communication between chronically ill hospitalized children was utilized by the participants from 7-15 age groups; and had a positive impact on their hospitalization. ^
Resumo:
Abstract: This informative and interactive teaching symposium posits the Positive Peer Leadership Mentoring Program (PPLM) as an evidence-based wrap-around service for youth and families in Miami-Dade who are involved in the school-to-prison pipeline. Presenters first provide information to initiate the dialogic process of discerning and interpreting the school-to-prison pipeline, impacted by costs of incarceration for Black youth and families and the move toward effective mental health services in the juvenile justice system. Then, participants experience an interactive pedagogical mentoring format set forth in PPLM as the first step toward transforming the school-to-prison pipeline in their own classroom or other educational setting.
O figurino na narrativa dos filmes de Guel Arraes: O Auto da Compadecida (2000) e O Bem Amado (2010)
Resumo:
This research focuses on the course of Guel Arraes, moviemaker, and picks two movies for analysis: O Auto da Compadecida (2000) and O Bem Amado (2010), as well as their costumes. The focus on the costume is based on Semiology and aims to decode the meanings that stem out of the clothes. Three of the movies characters will have their costumes analyzed based on Roland Barthes’ theory, mainly considering semiology elements (language and speech), (significant and meaning) and (system and syntagma). The influence of the Armorial movement into the movie O Auto da Compadecida and the Kitsch aesthetic in O Bem Amado deserve consideration, aside from the study on costumes function within narrative, supported by Roland Barthes’ structural analysis of the narrative. We sought to highlight the balance between characters’ lines and the image of the costumes in the movies. Adding to the study on how costumes strongly accounts to narrative, we observed characteristic traits of director and scriptwriter Guel Arraes present in his works, which are the northeastern man identity, a presentation of the Northeast and popular comedy. We believe that his choices when creating and his life influences are not separate from one another. Our research was movie-appraisal centered and had a thorough investigation all over language. The main considerations are supported by the following theories: Barthes (2007), Figueirôa and Fechine (2008), Moles (2001), Stuart Hall (2005) and Mikhail Bakhtin (2013).
Resumo:
In 2004, the National Institutes of Health made available the Patient-Reported Outcomes Measurement Information System – PROMIS®, which is constituted of innovative item banks for health assessment. It is based on classical, reliable Patient-Reported Outcomes (PROs) and includes advanced statistical methods, such as Item Response Theory and Computerized Adaptive Test. One of PROMIS® Domain Frameworks is the Physical Function, whose item bank need to be translated and culturally adapted so it can be used in Portuguese speaking countries. This work aimed to translate and culturally adapt the PROMIS® Physical Function item bank into Portuguese. FACIT (Functional Assessment of Chronic Illness Therapy) translation methodology, which is constituted of eight stages for translation and cultural adaptation, was used. Fifty subjects above the age of 18 years participated in the pre-test (seventh stage). The questionnaire was answered by the participants (self-reported questionnaires) by using think aloud protocol, and cognitive and retrospective interviews. In FACIT methodology, adaptations can be done since the beginning of the translation and cultural adaption process, ensuring semantic, conceptual, cultural, and operational equivalences of the Physical Function Domain. During the pre-test, 24% of the subjects had difficulties understanding the items, 22% of the subjects suggested changes to improve understanding. The terms and concepts of the items were totally understood (100%) in 87% of the items. Only four items had less than 80% of understanding; for this reason, it was necessary to chance them so they could have correspondence with the original item and be understood by the subjects, after retesting. The process of translation and cultural adaptation of the PROMIS® Physical Function item bank into Portuguese was successful. This version of the assessment tool must have its psychometric properties validated before being made available for clinical use.
Resumo:
The Enred@te initiative, created by Red Cross, the Vodafone Foundation and the TECSOS Foundation, emerged as an evolution of a previous project that developed and piloted a video-communication solution with older adults, using a system installed in their own televisions. Following the success of this first initiative, it was decided to advance toward a more flexible, robust, easy-to-use and high-quality solution, producing a social network accessible through tablets. Older adults can use the network to video-communicate with other older adults and stay informed on various topics of interest. Additionally, a new innovation incorporates the participation of virtual volunteers, a part of the network that promotes its use in an inclusive and participative manner. This solution was also piloted in 2014 with positive results and work to turn it into a service that can reach older adults through the Red Cross is currently on-going.
Resumo:
Laser scanning is a terrestrial laser-imaging system that creates highly accurate three-dimensional images of objects for use in standard computer-aided design software packages. This report describes results of a pilot study to investigate the use of laser scanning for transportation applications in Iowa. After an initial training period on the use of the scanner and Cyclone software, pilot tests were performed on the following projects: intersection and railroad bridge for training purposes; section of highway to determine elevation accuracy and pair of bridges to determine level of detail that can be captured; new concrete pavement to determine smoothness; bridge beams to determine camber for deck-loading calculations; stockpile to determine volume; and borrow pit to determine volume. Results show that it is possible to obtain 2-6 mm precision with the laser scanner as claimed by the manufacturer compared to approximately one-inch precision with aerial photogrammetry using a helicopter. A cost comparison between helicopter photogrammetry and laser scanning showed that laser scanning was approximately 30 percent higher in cost depending on assumptions. Laser scanning can become more competitive to helicopter photogrammetry by elevating the scanner on a boom truck and capturing both sides of a divided roadway at the same time. Two- and three-dimensional drawings were created in MicroStation for one of the scanned highway bridges. It was demonstrated that it is possible to create such drawings within the accuracy of this technology. It was discovered that a significant amount of time is necessary to convert point cloud images into drawings. As this technology matures, this task should become less time consuming. It appears that laser scanning technology does indeed have a place in the Iowa Department of Transportation design and construction toolbox. Based on results from this study, laser scanning can be used cost effectively for preliminary surveys to develop TIN meshes of roadway surfaces. It also appears that this technique can be used quite effectively to measure bridge beam camber in a safer and quicker fashion compared to conventional approaches. Volume calculations are also possible using laser scanning. It seems that measuring quantities of rock could be an area where this technology would be quite beneficial since accuracy is more important with this material compared to soil. Other applications for laser scanning could include developing as-built drawings of historical structures such as the bridges of Madison County. This technology could also be useful where safety is a concern such as accurately measuring the surface of a highway active with traffic or scanning the underside of a bridge damaged by a truck. It is recommended that the Iowa Department of Transportation initially rent the scanner when it is needed and purchase the software. With time, it may be cost justifiable to purchase the scanner as well. Laser scanning consultants can be hired as well but at a higher cost.
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
Thesis (Master's)--University of Washington, 2016-08