Progress and issues in rural electrification in Bihar, India : a preliminary analysis

Rural electrification has been an important part of government policy since India gained independence. However, despite the number of electrified villages expanding rapidly in recent years, there are many that still remain un-electrified. This paper addresses the issue of intra-state disparity in access to electricity and examines the determinants of electrification at the village level using data from a survey conducted in rural Bihar, one of the underdeveloped states in India. An econometric analysis demonstrates that small villages in remote locations tend to be considered a low priority in the process of electrification. Electrification at the village level in the more advanced states is no longer an issue, though the challenge of access to electrification at the household level remains. This paper also discusses issues that emerged from interviewing villagers and visiting rural areas, and shows that the actual progress of rural electrification may not be as advanced as government statistics indicate.

Role of supply chains in adopting product related environmental regulations : case studies of Vietnam

This paper shows some findings how product related environmental regulations, especially those that relate to management of chemical substances affect firms in Asia. Interviews were conducted for some firms in Vietnam that are part of global supply chains of electrical and electronic, furniture, and plastic industries. The global supply chains with MNC lead firms have helped local firms in developing countries to adopt technical PRERs overseas. On the other hand, indigenous firms that do not belong to global value chains might face hurdles to keep exporting to the regulated markets. PRERs could become a barrier for firms that attempt to the regulated markets without supports by MNC lead firms.

Where does Philippine education go? : the "K to 12" program and reform of Philippine basic education

In 2012 the Philippines launched its "K to 12" Program, a comprehensive reform of its basic education. Through this reform, the Philippines is catching up with global standards in secondary education and is attaching a high value to kindergarten. The structure, curricula, and philosophy of the education system are undergoing reform and improvement. The key points of the new policy are "preparation" for higher education, "eligibility" for entering domestic and overseas higher educational institutions, and immediate "employability" on graduating, all leading toward a "holistically developed Filipino". This policy appears admirable and timely, but it faces some pedagogical and socioeconomic problems. The author wants to point out in particular that the policy needs to address gender problems and should be combined with demand-side approaches in order to promote poverty alleviation and human development in the Philippines.

Impact of product-related environmental regulations in Asia : descriptive statistics from a survey of firms in Penang, Malaysia

This paper summarizes the main results of a unique firm survey conducted in Penang, Malaysia in 2012 on product-related environmental regulations. The results show that firms receiving foreign-direct investment have adapted well to regulations but faced more rejections. Several research questions are addressed and examined by using the survey data. Major findings are as follows. First, adaptation involves changes in input procurement and market diversification, which potentially changes the structure of supply chains. Second, belonging to global supply chains is a key factor in compliance, but this requires firms to meet tougher customer requirements. Third, there is much room for government policy to play a role in assisting firms.

Impact of product-related environmental regulations in Asia : descriptive statistics from a survey of firms in Vietnam

This paper summarizes the main results of a unique firm survey conducted in Vietnam in 2011 on product-related environmental regulations (PRERs). The results of this survey are compared with the results of a corresponding survey of firms in Penang, Malaysia (Michida, et al. 2014b). The major findings are as follows. First, adaptation to PRERs involves changes in input procurement and results in market diversification, which potentially alters the structure of supply chains. This finding is consistent with the Malaysian survey result. Second, connections to global supply chains are key to compliance, but this requires firms to meet more stringent customer requirements. Third, government policy can play an important role in assisting firms to comply with PRERs.

The asset/liability structure of the Philippine banks and non-bank financial institutions in 2000s : a preliminary study for financial access analyses

Based on the consolidated statements data of the universal/commercial banks (UKbank) and non-bank financial institutions with quasi-banking licenses, this paper presents a keen necessity of obtaining data in detail on both sides (assets and liabilities) of their financial conditions and further analyses. Those would bring more adequate assessments on the Philippine financial system, especially with regard to each financial subsector's financing/lending preferences and behavior. The paper also presents a possibility that the skewed locational and operational distribution exists in the non-UKbank financial subsectors. It suggests there may be a significant deviation from the authorities' (the BSP, SEC and others) intended/anticipated financial system in the banking/non-bank financial institutions' real operations.

A closer look at the diffusion of ChinaGAP

To enhance Chinese agricultural production, improve food quality, build consumer trust, and encourage the export of agricultural products, the Chinese government designed the Chinese version of Good Agricultural Practice (ChinaGAP) based on the main principles of the GlobalGAP combining the current Chinese agricultural production situation. This paper studies the characteristics of the ChinaGAP and focusing on the diffusion of the standard using qualitative analysis. Relevant policy recommendations are given based on the Chinese agricultural production status. Previous studies mainly focused on the role of the government. However this paper makes specific suggestions to particular stakeholders in the standard making and diffusion process.

Changes in source of profits and business strategies? : some evidence from the Philippines' universal banks in the 2000s

In the 2000s, the Philippines' local banking sector have conducted very conservative lending behavior and at the same time, gradually but continuously improved their profitability in terms of ROE (return on equity). A set of analyses on the flow of funds and segment reports (information) of local universal banks, whose loans outstanding to the industrial sector have dominated more than three fourths of the total outstanding, shows that (1) they have actively manage assets overseas, (2) their profitability has come from investment activities in the securities markets, and (3) some universal banks have shifted their resources into the consumer/retail segment. Although further refinement in the dataset is needed for a more detailed analysis, diverse business strategies would be expected among the local universal banks in the near future.

Localización óptima de una planta de bioetanol a partir de tubérculos de pataca (Helianthus tuberosus l.) en la Cuenca del Duero

El objetivo del presente trabajo es determinar la localización óptima de una planta de producción de 30.000 m3/año de bioetanol a partir de tubérculos de pataca (Helianthus tuberosus L.) cultivada en regadío, en tierras de barbecho de la Cuenca Hidrográfica del Duero (CH Duero). Inicialmente se elaboró, a partir de datos bibliográficos, un modelo de producción de pataca en base a una ecuación de regresión que relaciona datos experimentales de rendimientos de variedades tardías con variables agroclimáticas. Así se obtuvo una función de producción basada en la cantidad de agua disponible (precipitación efectiva + dosis de riego) y en la radiación global acumulada en el periodo brotación‐senescencia del cultivo. A continuación se estima la superficie potencial de cultivo de pataca en la CH Duero a partir de la superficie arable en regadío cartografiada por el Sistema de Ocupación del Suelo (SIOSE), a la cual se le aplican, en base a los requerimientos del cultivo, unas restricciones climáticas, edafológicas, topográficas y logísticas mediante el uso de Sistemas de Información Geográfica (SIG). La proporción de superficie de regadío restringida se cuantifica a escala municipal con el fin de calcular la superficie de barbecho en regadío apta para el cultivo de pataca. A partir de las bases de datos georreferenciadas de precipitación, radiación global, y la dotación de agua para el riego de cultivos no específicos establecida en el Plan Hidrológico de la Cuenca del Duero a escala comarcal, se estimó la producción potencial de tubérculos de pataca sobre la superficie de barbecho de regadío según el modelo de producción elaborado. Así, en las 53.360 ha de barbecho en regadío aptas para el cultivo de pataca se podrían producir 3,8 Mt de tubérculos al año (80 % de humedad) (761.156 t ms/año) de los que se podría obtener 304.462 m3/año de bioetanol, considerando un rendimiento en la transformación de 12,5 kg mf/l de etanol. Se estiman los costes de las labores de cultivo de pataca así como los costes de la logística de suministro a una planta de transformación considerando una distancia media de transporte de 25 km, en base a las hojas de cálculo de utilización de aperos y maquinaria agrícola oficiales del Ministerio de Agricultura, Alimentación y Medio Ambiente (MAGRAMA). Considerando el balance de costes asociados a la producción de bioetanol (costes de transformación, distribución y transporte del producto, costes estructurales de la planta, ahorro de costes por la utilización de las vinazas generadas en el proceso como fertilizante y un beneficio industrial), se ha estimado que el coste de producción de bioetanol a partir de tubérculos de pataca asciende a 61,03 c€/l. Se calculan los beneficios fiscales para el Estado por el cultivo de 5.522 ha de pataca que suministren la materia prima necesaria para una planta de bioetanol de 30.000 m3/año, en concepto de cotizaciones a la Seguridad Social de los trabajadores, impuestos sobre el valor añadido de los productos consumidos, impuesto sobre sociedades y ahorro de las prestaciones por desempleo. Se obtuvieron unos beneficios fiscales de 10,25 c€ por litro de bioetanol producido. El coste de producción de bioetanol depende del rendimiento de tubérculos por hectárea y de la distancia de transporte desde las zonas de producción de la materia prima hasta la planta. Se calculó la distancia máxima de transporte para que el precio de coste del bioetanol producido sea competitivo con el precio de mercado del bioetanol. Como resultado se determinó que el precio del bioetanol (incluido un beneficio industrial del 15%) de la planta sería igual o inferior al precio de venta en el mercado (66,35 c€/l) con una distancia máxima de transporte de 25 km y un rendimiento mínimo del cultivo de 60,1 t mf/ha. Una vez conocido el área de influencia de la planta según la distancia de transporte máxima, se determinó la localización óptima de la planta de producción de bioetanol mediante un proceso de ubicación‐asignación realizado con SIG. Para ello se analizan los puntos candidatos a la ubicación de la planta según el cumplimiento de unos requerimientos técnicos establecidos (distancia a fuentes de suministro eléctrico y de recursos hídricos, distancia a estaciones de ferrocarril, distancia a núcleos urbanos y existencia de Espacios Naturales Protegidos) que minimizan la distancia de transporte maximizando la cantidad de biomasa disponible según la producción potencial estimada anteriormente. Por último, la superficie destinada al cultivo de pataca en el área de influencia de la planta se determina en base a un patrón de distribución del cultivo alrededor de una agroindustria. Dicho patrón se ha obtenido a partir del análisis del grado de ocupación del cultivo de la remolacha en función de la distancia de transporte a la planta azucarera de Miranda de Ebro (Burgos). El patrón resultante muestra que la relación entre el grado de ocupación del suelo por el cultivo y la distancia de transporte a la planta siguen una ecuación logística. La localización óptima que se ha obtenido mediante la metodología descrita se ubica en el municipio leonés de El Burgo Ranero, donde la producción potencial de tubérculos de pataca en la superficie de barbecho situada en un radio de acción de 25 km es de 375.665 t mf/año, superando las 375.000 t mf requeridas anualmente por la planta de bioetanol. ABSTRACT Jerusalem artichoke (Helianthus tuberosus L.) is a harsh crop with a high potential for biomass production. Its main use is related to bioethanol production from the carbohydrates, inulin mainly, accumulated in its tubers at the end of the crop cycle. The aerial biomass could be used as solid biofuel to provide energy to the bioethanol production process. Therefore, Jerusalem artichoke is a promising crop as feedstock for biofuel production in order to achieve the biofuels consumption objectives established by the Government of Spain (PER 2011‐2020 and RDL 4/2013) and the European Union (Directive 2009/28/EC). This work aims at the determination of the optimal location for a 30,000 m3/year bioethanol production plant from Jerusalem artichoke tubers in the Duero river basin. With this purpose, a crop production model was developed by means of a regression equation that relates experimental yield data of late Jerusalem artichoke varieties with pedo‐climatic parameters from a bibliographic data matrix. The resulting crop production model was based on the crop water availability (including effective rainfall and irrigation water supplied) and on global radiation accumulated in the crop emergence‐senescence period. The crop potential cultivation area for Jerusalem artichoke in the Duero basin was estimated using the georeferenced irrigated arable land from the “Sistema de Ocupación del Suelo” (SIOSE) of Spain. Climatic, soil, slope and logistic restrictions were considered by means of Geographic Information Systems (GIS). The limited potential growing area was then applied to a municipality scale in order to calculate the amount of fallow land suitable for Jerusalem artichoke production. Rainfall and global radiation georeferenced layers as well as data of irrigation water supply for crop production (established within the Duero Hydrologic Plan) were use to estimate the potential production of Jerusalem artichoke tubers in the suitable fallow land according to the crop production model. As a result of this estimation, there are 53,360 ha of fallow land suitable for Jerusalem artichoke production in the Duero basin, where 3.8 M t fm/year could be produced. Considering a bioethanol processing yield of 12.5 kg mf per liter of bioethanol, the above mentioned tuber potential production could be processed in 304,462 m3/year of bioethanol. The Jerusalem crop production costs and the logistic supply costs (considering an average transport distance of 25 km) were estimated according to official agricultural machinery cost calculation sheets of the Minister of Agriculture of Spain (MAGRAMA). The bioethanol production cost from Jerusalem artichoke tubers was calculated considering bioethanol processing, transport and structural costs, industrial profits as well as plant cost savings from the use of vinasses as fertilizer. The resulting bioetanol production cost from Jerusalem artichoke tubers was 61.03 c€/l. Additionally, revenues for the state coffers regarding Social Security contributions, added value taxes of consumed raw materials, corporation tax and unemployment benefit savings due to the cultivation of 5,522 ha of Jerusalem artichoke for the 30.000 m3/year bioethanol plant supply were calculated. The calculated revenues amounted to 10.25 c€/l. Bioethanol production cost and consequently the bioethanol plant economic viability are strongly related to the crop yield as well as to road transport distance from feedstock production areas to the processing plant. The previously estimated bioethanol production cost was compared to the bioethanol market price in order to determine the maximum supply transport distance and the minimum crop yield to reach the bioethanol plant economic viability. The results showed that the proposed plant would be economically viable at a maximum transport distance of 25 km and at a crop yield not less than 60.1 t fm/ha. By means of a GIS location‐allocation analysis, the optimal bioethanol plant location was determined. Suitable candidates were detected according to several plant technical requirements (distance to power and water supply sources, distance to freight station, and distance to urban areas and to Natural Protected Areas). The optimal bioethanol plant location must minimize the supply transport distance whereas it maximizes the amount of available biomass according to the previously estimated biomass potential production. Lastly, the agricultural area around the bioethanol plant finally dedicated to Jerusalem artichoke cultivation was planned according to a crop distribution model. The crop distribution model was established from the analysis of the relation between the sugar beet (Beta vulgaris L.) cropping area and the road transport distance from the sugar processing plant of Miranda de Ebro (Burgos, North of Spain). The optimal location was situated in the municipality of ‘El Burgo Ranero’ in the province of León. The potential production of Jerusalem artichoke tubers in the fallow land within 25 km distance from the plant location was 375,665 t fm/year, which exceeds the amount of biomass yearly required by the bioethanol plant.

Modelo explicativo de la relación entre productividad y valores organizacionales, en la PYME del sector metalúrgico y minero de Venezuela

Como consecuencia de los procesos de globalización el mundo empresarial está sometido a constantes cambios que han originado la necesidad en las empresas de evaluar su funcionamiento, con el objeto de adecuar su gestión a las mejores prácticas gerenciales y operativas, en función de adaptarse a las exigencias presentes en los escenarios en que están inmersas. La presente investigación tiene como propósito desarrollar un modelo explicativo de la relación entre la productividad y los valores organizacionales, teniendo como premisa los distintos planteamientos o teorías que destacan la importancia que tienen los valores organizacionales para que las empresas logren sus metas. Específicamente se tomó como referencia la clasificación de los valores organizacionales, que contempla el modelo de gestión de Dirección por Valores (DPV), de García y Dolan (2001). Las PYMES, al considerar el efecto que tienen los valores organizacionales en la productividad, pueden apoyar su gestión a través del compromiso de las personas para lograr los resultados de productividad que quieren o necesitan alcanzar. El abordaje del estudio se ha basado en la investigación explicativa, a través de la cual se exponen las razones de ocurrencia de un fenómeno o se muestran los mecanismos por los que se relacionan dos o más variables, lo que permitió conjugar definiciones y supuestos de las relaciones encontradas entre los valores organizacionales identificados de acuerdo a la opinión de los entrevistados y que resultaron ser significativos con los resultados de productividad que presentan las empresas que fueron objeto de esta investigación La población estuvo conformada por 40 empresas activas del sector metalúrgico y minero de Ciudad Guayana, Estado Bolívar, Venezuela, pertenecientes a la Asociación de Industriales Metalúrgicos y de Minería de la región Guayana (AIMM) y al directorio de la Cámara de Industriales y Mineros de Guayana. La muestra estudiada corresponde a 25 empresas que representan el 62% de la población. El proceso que se siguió para generar el modelo explicativo contempla tres etapas. La primera consiste en la fase descriptiva donde se recogió la información referente a la productividad de las empresas y a la determinación de los valores organizacionales identificados a través del análisis cualitativo de las entrevistas que se realizaron a los informantes de las empresas de la muestra. Para ello se utilizó el software Atlas ti 6.0. La segunda etapa, denominada comparativa, consistió en determinar la relación entre la productividad y los valores organizacionales, a través de las tablas de contingencias, de acuerdo con el grado de significancia que mostró el estadístico Chi- cuadrado. La tercera y última etapa del proceso es la fase explicativa que consistió en estimar la magnitud de la relación entre las variables productividad y valores organizacionales utilizando el coeficiente de contingencia de Pearson, y en establecer las asociaciones de acuerdo a las proximidades observadas que resultaron del análisis de correspondencias múltiples. Entre los hallazgos del estudio desarrollado se encontró que la productividad de las empresas puede fijarse en tres categorías: alta, media y baja y entre los factores que afectan a la productividad destacan, en el contexto externo: el gobierno, los clientes y los proveedores y en el contexto interno: la mano de obra, los materiales y los suministros. Según la opinión de los gerentes entrevistados, los valores organizacionales que caracterizan a las empresas del sector estudiado se agrupan en veintisiete categorías, que se clasifican en los siguientes componentes: entorno mercado, clientes, proveedores y otras empresas aliadas, medio ambiente, forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. Los valores organizacionales que resultaron ser significativos fueron la innovación, la honestidad y el orden y limpieza. La magnitud de la relación encontrada del valor innovación fue moderadamente fuerte. Se infiere que las empresas, al tener una Productividad baja, deciden innovar en el desarrollo de nuevos productos. El valor honestidad arrojó una relación moderadamente fuerte, determinando que las empresas de Productividad alta basan sus relaciones con los proveedores en la honestidad. Finalmente, el valor orden y limpieza muestra una relación moderadamente débil, lo que hace suponer que las empresas de Productividad media tienen alguna preferencia por mantener el orden y limpieza en las áreas de trabajo. El modelo explicativo de la relación entre productividad y valores organizacionales, en las PYMES del sector metalúrgico y minero de Ciudad Guayana, quedó conformado por los siguientes componentes: mercado, clientes, proveedores y otras empresas aliadas, y medio ambiente. No se encontraron relaciones en los componentes forma de tratar la Dirección al resto de empleados, forma de trabajar cotidiana y gestión de los recursos económicos. ABSTRACT As a result of globalization processes, the business world is subject to constant change. This has resulted in the need for companies to evaluate their performance in order to adjust their processes to the best managerial and operational practices, with the goal to adapt to the demands present in the scenarios in which they are embedded. This research aimed to develop an explanatory model of the relationship between productivity and organizational values. In addition, it was based on the different approaches or theories that relate the importance for enterprises of the organizational values to achieve their goals. Specifically, reference was made to the classification of organizational values, which includes the model of Management by Values (DPV) following García and Dolan (1997). The SMEs, considering the effect of organizational values on productivity, can support their management through the commitment of their people to achieve productivity results that they want or need to accomplish. The study approach was based on explanatory research, which presents the reasons for occurrence of a phenomenon and the mechanisms through which two or more variables are related. This allowed to combine definitions and assumptions about the relationship found between organizational values and the productivity results of the companies that took part in this research. Organizational values were identified in the opinion of the managers interviewed, and were found to be significant with the productivity results. The population consisted of 40 active enterprises of the metallurgical and mining industry of Ciudad Guayana, Estado Bolivar, Venezuela. These enterprises were members of the Association of Metallurgical and Mining Industry of the Guayana Region (AIMM, by its acronym in Spanish) and the Directory of the Chamber of Industrial and Mining of Guayana. The sample of the study is comprised of 25 enterprises, which represent 62% of the total population. The process which has been followed to generate the explanatory model involves three stages. The first stage is the descriptive phase where the information about enterprises productivity and the determination of organizational values is gathered. These organizational values were identified by a qualitative analysis of the interviews conducted with managers of each enterprise. This analysis was performed using the Atlas ti 6.0 software. The second stage, denominated comparative, consisted in determining the relationship between productivity and organizational values through contingency tables, and according to the degree of significance showed by the Chi-Square, statistic. The third, and final stage of the process, is the explanatory phase. This consisted in estimating the magnitude of the relationship between productivity and organizational values variables using the Pearson's contingency coefficient. In addition, this stage comprises the establishment of the associations according to the observed proximities that resulted from the multiple correspondence analysis. Among the findings of this study, it was found that the productivity of enterprises can be set in three categories: high, medium and low. Additionally, it was found that in the external context the factors that stand out affecting productivity are: government policy, customers and suppliers, while in the domestic context they are: labor, materials and supplies. According to the opinion of the managers interviewed the organizational values that characterize the companies that were studied are grouped into twenty seven categories. These categories are classified into the following components: market environment, customers, suppliers and other allied companies, the environment, how Management deals with of the employees, way to work every day, and management of economic resources. Organizational values that were found to be significant were innovation, honesty and order and cleanliness. The magnitude of the relation of the innovation value was found to be moderately strong. It is inferred that companies that have low productivity decide to innovate in the development of new products. The honesty value showed a moderately strong relation, determining that high productivity enterprises base their relationships with suppliers on honesty. Lastly, the order and cleanliness value showed a moderately weak relation, which suggests that average productivity enterprises have a preference to maintain order and cleanliness in the work areas. The explanatory model of the relationship between productivity and organizational values, in the SMEs of the metallurgical and mining sector of Ciudad Guayana, was composed of the following components: market, customers, suppliers and other allied companies, and the environment. No relationships were found in the following components: how Management deals with employees, way to work every day, and management of economic resources.

Análise do impacto das políticas de intervenção no setor do agronegócio sobre a cadeia de carne bovina na Venezuela

O objetivo deste trabalho foi analisar o desempenho da cadeia de carne bovina na Venezuela sob o efeito de políticas de intervenção estatal principalmente nas últimas décadas. Para tanto, foi empregada a abordagem teórica do enfoque sistêmico em conjunto com metodologia que se apoiou em um modelo econométrico para explicar o efeito de variáveis tecnológicas e macroeconômicas no agronegócio vis a vis a resultante da produção doméstica de carne bovina nas últimas décadas. Os resultados mostram que, no marco de mudanças institucionais estabelecidas desde a década de 1980 e especialmente as intervenções governamentais vigentes a partir do ano de 2003, a cadeia de carne bovina da Venezuela apresenta um desempenho negocial preocupante e não sustentável. Na última década, a Venezuela decresceu seu inventário bovino a uma taxa média anual de 2,56% entre 2003 e 2014. O número de cabeças/habitante diminuiu a uma taxa anual de 1,30% entre 1960 e 2014, ficando em 0,38 cabeças/habitante. O número de cabeças abatidas sobre o total do rebanho (taxa de desfrute geral do rebanho) foi de 10,82% para o ano de 2014, inferior à média de países vizinhos como Colômbia e Brasil que ficaram em 20,85% e 19,42% respectivamente. A produção doméstica de carne bovina decresceu a uma taxa anual de 2,22% entre 1997 e 2014 (mesmo considerando o abate de bovinos importados). A quantidade de carne oriunda de animais importados cresceu até alcançar um máximo de 58,51% do abate nacional, em 2013. Isto significou um decréscimo real da produção endógena de 71,55% entre os anos de 1997 e 2013. Neste contexto, a produção nacional percapita diminuiu de 18,31 kg/habitante (em 1997) para um mínimo de 3,97 kg/habitante (em 2013). Para o atendimento da demanda doméstica passou-se a contar, crescentemente, com importações de carne in natura que cresceram em volume inicial de 0,59 mil toneladas (t) de equivalente carcaça (em 1997) para um máximo de 307,57 mil t em 2008. A taxa de penetração das importações de carne bovina equivalente (carne e bovinos em pé) resultou em 79,54% do atendimento da demanda doméstica em 2013 (cerca de 15,45 kg/habitante/ano). Neste contexto, as intervenções mais relevantes têm sido a Lei de Terras que propiciou um ambiente de insegurança jurídica; os controles de preços e a política cambial que criaram distorções no mercado; e, a crescente influência nas redes de distribuição de alimentos, com forte dependência do comércio exterior, alavancado com os incrementos no preço internacional do petróleo entre 2003 e 2014. Tudo isto tem resultado em um cenário de desmonte da produção interna da carne bovina, que pode ser visualizado em episódios crescentes de escassez deste produto no mercado interno. Ao final, são sugeridas algumas práticas de políticas pública e setoriais para a reversão desse quadro insustentável para esta importante cadeia de negócios da Venezuela.

An Analysis of Effective Components of Climate Change Policies in Three Colorado Counties

Climate change is critically impacting the environment and economy at the local level. County governments have an opportunity to adopt climate change policies that address local environmental and economic concerns. The Colorado counties of Boulder, Gunnison, and Pitkin have all adopted some form of climate change policies. There are some components of each of these policies that are more effective in terms of economic, environmental, and community benefits. An effective climate change policy clearly states specific cost analyses, environmental impacts at the local level, the relationship between impacts and the community, and the economic benefits of policy adoption. This Capstone project addresses specific cost and energy analyses and provides a beneficial policy framework for county governments.

Effective Surface Water Quality Policies: A Contrast of Policies in the United States and the European Union

The United States and the European Union each have their own policy approach to protect surface water quality. Both policy approaches are similar in many ways. Both rely heavily on command and control. However, there are differences in the application of the details. Both the U.S. and E.U. began current efforts to protect surface water quality in the 1970s, yet quality continues to less than desired in both places. Both have reduced point source pollutants but have had difficulty controlling non-point source pollutants even though policies have been in place for many decades. The successes and failures of the two policies are studied in this project to determine which aspects of both policies will best protect surface water quality in an increasingly complex future.

The cognitive mobilization index: crises and political generations

This article shows how the cognitive mobilization index, designed for use in observing potential political participation, can be used as an indicator of the political climate that a particular society is going through. Following a discussion of the theoretical elaborations (and their working definitions) of the concept of cognitive mobilization, a longitudinal study of various European countries is used to consider the question of how political crises influence cognitive mobilization indexes and what effects they have on the political socialization process among the youngest cohorts.