Design, analysis and evaluation of sigma-delta based beamformers for medical ultrasound imaging applications

The inherent analogue nature of medical ultrasound signals in conjunction with the abundant merits provided by digital image acquisition, together with the increasing use of relatively simple front-end circuitries, have created considerable demand for single-bit  beamformers in digital ultrasound imaging systems. Furthermore, the increasing need to design lightweight ultrasound systems with low power consumption and low noise, provide ample justification for development and innovation in the use of single-bit  beamformers in ultrasound imaging systems. The overall aim of this research program is to investigate, establish, develop and confirm through a combination of theoretical analysis and detailed simulations, that utilize raw phantom data sets, suitable techniques for the design of simple-to-implement hardware efficient  digital ultrasound beamformers to address the requirements for 3D scanners with large channel counts, as well as portable and lightweight ultrasound scanners for point-of-care applications and intravascular imaging systems. In addition, the stability boundaries of higher-order High-Pass (HP) and Band-Pass (BP) Σ−Δ modulators for single- and dual- sinusoidal inputs are determined using quasi-linear modeling together with the describing-function method, to more accurately model the  modulator quantizer. The theoretical results are shown to be in good agreement with the simulation results for a variety of input amplitudes, bandwidths, and modulator orders. The proposed mathematical models of the quantizer will immensely help speed up the design of higher order HP and BP Σ−Δ modulators to be applicable for digital ultrasound beamformers. Finally, a user friendly design and performance evaluation tool for LP, BP and HP  modulators is developed. This toolbox, which uses various design methodologies and covers an assortment of  modulators topologies, is intended to accelerate the design process and evaluation of  modulators. This design tool is further developed to enable the design, analysis and evaluation of  beamformer structures including the noise analyses of the final B-scan images. Thus, this tool will allow researchers and practitioners to design and verify different reconstruction filters and analyze the results directly on the B-scan ultrasound images thereby saving considerable time and effort.

Initiation of Orderly Spinning Detonation Waves via Phased Sparking

Thesis (Master's)--University of Washington, 2016-06

Flexible Sensor for Wearable Vital Sign Monitoring System

In modern society, the body health is a very important issue to everyone. With the development of the science and technology, the new and developed body health monitoring device and technology will play the key role in the daily medical activities. This paper focus on making progress in the design of the wearable vital sign system. A vital sign monitoring system has been proposed and designed. The whole detection system is composed of signal collecting subsystem, signal processing subsystem, short-range wireless communication subsystem and user interface subsystem. The signal collecting subsystem is composed of light source and photo diode, after emiting light of two different wavelength, the photo diode collects the light signal reflected by human body tissue. The signal processing subsystem is based on the analog front end AFE4490 and peripheral circuits, the collected analog signal would be filtered and converted into digital signal in this stage. After a series of processing, the signal would be transmitted to the short-range wireless communication subsystem through SPI, this subsystem is mainly based on Bluetooth 4.0 protocol and ultra-low power System on Chip(SoC) nRF51822. Finally, the signal would be transmitted to the user end. After proposing and building the system, this paper focus on the research of the key component in the system, that is, the photo detector. Based on the study of the perovskite materials, a low temperature processed photo detector has been proposed, designed and researched. The device is made up of light absorbing layer, electron transporting and hole blocking layer, hole transporting and electron blocking layer, conductive substrate layer and metal electrode layer. The light absorbing layer is the important part of whole device, and it is fabricated by perovskite materials. After accepting the light, the electron-hole pair would be produced in this layer, and due to the energy level difference, the electron and hole produced would be transmitted to metal electrode and conductive substrate electrode through electron transporting layer and hole transporting layer respectively. In this way the response current would be produced. Based on this structure, the specific fabrication procedure including substrate cleaning; PEDOT:PSS layer preparation; pervoskite layer preparation; PCBM layer preparation; C60, BCP, and Ag electrode layer preparation. After the device fabrication, a series of morphological characterization and performance testing has been done. The testing procedure including film-forming quality inspection, response current and light wavelength analysis, linearity and response time and other optical and electrical properties testing. The testing result shows that the membrane has been fabricated uniformly; the device can produce obvious response current to the incident light with the wavelength from 350nm to 800nm, and the response current could be changed along with the light wavelength. When the light wavelength keeps constant, there exists a good linear relationship between the intensity of the response current and the power of the incident light, based on which the device could be used as the photo detector to collect the light information. During the changing period of the light signal, the response time of the device is several microseconds, which is acceptable working as a photo detector in our system. The testing results show that the device has good electronic and optical properties, and the fabrication procedure is also repeatable, the properties of the devices has good uniformity, which illustrates the fabrication method and procedure could be used to build the photo detector in our wearable system. Based on a series of testing results, the paper has drawn the conclusion that the photo detector fabricated could be integrated on the flexible substrate and is also suitable for the monitoring system proposed, thus made some progress on the research of the wearable monitoring system and device. Finally, some future prospect in system design aspect and device design and fabrication aspect are proposed.

Diseño de cabezal de adquisición para biopotenciales

La monitorización del funcionamiento del corazón se realiza generalmente por medio del análisis de los potenciales de acción generados en las células responsables de la contracción y relajación de este órgano. El proceso de monitorización mencionado consta de diferentes partes. En primer lugar, se adquieren las señales asociadas a la actividad de las células cardíacas. La conexión entre el cuerpo humano y el sistema de acondicionamiento puede ser implementada mediante diferentes tipos de electrodos – de placa metálica, de succión, top-hat, entre otros. Antes de la adquisición la señal eléctrica recogida por los electrodos debe ser acondicionada de acuerdo a las especificaciones de la entrada de la tarjeta de adquisición de datos (DAQ o DAC). Básicamente, debe amplificar la señal de tal manera que se aproveche al máximo el rango dinámico del cuantificador. Las características de ruido del amplificador requerido deben ser diseñadas teniendo en cuenta que el ruido interno del amplificador no afecte a la interpretación del electrocardiograma original (ECG). Durante el diseño del amplificador se han tenido en cuenta varios requisitos. Deberá optimizarse ña relación señal a ruido (SNR) de la señal entre la señal del ECG y el ruido de cuantificación. Además, el nivel de la señal ECG a la entrada de la DAQ deberá alcanzar el máximo nivel del cuantificador. También, el ruido total a la entrada del cuantificador debe ser despreciable frente a la mínima señal discernible del ECG Con el objetivo de llevar a cabo un diseño electrónico con esas prestaciones de ruido, es necesario llevar a cabo un minucioso estudio de los fundamentos de caracterización de ruido. Se han abarcado temas como la teoría básica de señales aleatorias, análisis espectral y su aplicación a la caracterización en sistemas electrónicos. Finalmente, todos esos conceptos han sido aplicados a la caracterización de las diferentes fuentes de ruido en los circuitos con amplificadores operacionales. Muchos prototipos de amplificadores correspondientes a diferentes diseños han sido implementados en placas de circuito impreso (PCB – Printed Board Circuits). Aunque el ancho de banda del amplificador operacional es adecuado para su implementación en una ‘protoboard’, las especificaciones de ruido obligan al uso de PCB. De hecho, los circuitos implementados en PCB son menos sensibles al ruido e interferencias que las ‘protoboard’ dadas las características físicas de ambos tipos de prototipos.

Aplicación móvil para la gestión de los gastos en pisos compartidos

En esta memoria se describe el diseño y las pautas seguidas para la construcción de una aplicación móvil que permite la creación de grupos de personas para la gestión de los gastos, facturas y deudas comunitarias. Con un soporte Front-End en Android, un Back-End desarrollado en PHP y un almacenamiento de la información en una base de datos NoSQL, concretamente en MongoDB. El proyecto se ha realizado en grupo, separando los módulos Front-End y Back-End en dos proyectos distintos. En este proyecto desarrollamos el módulo Back-End. En él encontraremos el diseño para la construcción de la arquitectura REST y dar solución a la comunicación cliente y servidor de la aplicación. Además se ha añadido la componente PaaS (Platform as a Service) para acercar el desarrollo de este proyecto a un entorno de producción más real, afrontando así problemas reales. Al tratarse de un proyecto en equipo, el uso de metodologías ágiles cobra más importancia, por ello en este proyecto se ha hecho uso de la metodología Scrum.

Holistic Design In High-Speed Optical Interconnects

Integrated circuit scaling has enabled a huge growth in processing capability, which necessitates a corresponding increase in inter-chip communication bandwidth. As bandwidth requirements for chip-to-chip interconnection scale, deficiencies of electrical channels become more apparent. Optical links present a viable alternative due to their low frequency-dependent loss and higher bandwidth density in the form of wavelength division multiplexing. As integrated photonics and bonding technologies are maturing, commercialization of hybrid-integrated optical links are becoming a reality. Increasing silicon integration leads to better performance in optical links but necessitates a corresponding co-design strategy in both electronics and photonics. In this light, holistic design of high-speed optical links with an in-depth understanding of photonics and state-of-the-art electronics brings their performance to unprecedented levels. This thesis presents developments in high-speed optical links by co-designing and co-integrating the primary elements of an optical link: receiver, transmitter, and clocking.

In the first part of this thesis a 3D-integrated CMOS/Silicon-photonic receiver will be presented. The electronic chip features a novel design that employs a low-bandwidth TIA front-end, double-sampling and equalization through dynamic offset modulation. Measured results show -14.9dBm of sensitivity and energy efficiency of 170fJ/b at 25Gb/s. The same receiver front-end is also used to implement source-synchronous 4-channel WDM-based parallel optical receiver. Quadrature ILO-based clocking is employed for synchronization and a novel frequency-tracking method that exploits the dynamics of IL in a quadrature ring oscillator to increase the effective locking range. An adaptive body-biasing circuit is designed to maintain the per-bit-energy consumption constant across wide data-rates. The prototype measurements indicate a record-low power consumption of 153fJ/b at 32Gb/s. The receiver sensitivity is measured to be -8.8dBm at 32Gb/s.

Next, on the optical transmitter side, three new techniques will be presented. First one is a differential ring modulator that breaks the optical bandwidth/quality factor trade-off known to limit the speed of high-Q ring modulators. This structure maintains a constant energy in the ring to avoid pattern-dependent power droop. As a first proof of concept, a prototype has been fabricated and measured up to 10Gb/s. The second technique is thermal stabilization of micro-ring resonator modulators through direct measurement of temperature using a monolithic PTAT temperature sensor. The measured temperature is used in a feedback loop to adjust the thermal tuner of the ring. A prototype is fabricated and a closed-loop feedback system is demonstrated to operate at 20Gb/s in the presence of temperature fluctuations. The third technique is a switched-capacitor based pre-emphasis technique designed to extend the inherently low bandwidth of carrier injection micro-ring modulators. A measured prototype of the optical transmitter achieves energy efficiency of 342fJ/bit at 10Gb/s and the wavelength stabilization circuit based on the monolithic PTAT sensor consumes 0.29mW.

Lastly, a first-order frequency synthesizer that is suitable for high-speed on-chip clock generation will be discussed. The proposed design features an architecture combining an LC quadrature VCO, two sample-and-holds, a PI, digital coarse-tuning, and rotational frequency detection for fine-tuning. In addition to an electrical reference clock, as an extra feature, the prototype chip is capable of receiving a low jitter optical reference clock generated by a high-repetition-rate mode-locked laser. The output clock at 8GHz has an integrated RMS jitter of 490fs, peak-to-peak periodic jitter of 2.06ps, and total RMS jitter of 680fs. The reference spurs are measured to be –64.3dB below the carrier frequency. At 8GHz the system consumes 2.49mW from a 1V supply.

Interdisciplinarity and Design Conceptualisation: Contributions from a Small-Scale Design Experiment

Literature emphasises the sparse research focused in collaborative and open approaches in the design conceptualisation stage, also known as the Fuzzy Front-End (FFE). Presently, the most challenging discussion arising from this specific field of research lies in understanding on whether or not to structure the referred conceptual stage. Accordingly, the established hypothesis behind this study sustains that a structured approach in the FFE would benefit the interdisciplinary dialogue. Therefore, two objectives support this study: to understand the benefits of an interdisciplinary approach in the FFE, and to test one proposed model for this conceptual stage. By means of a small-scale design experiment, this paper pretends to give additional contributions to this area of research, in the context of new product development (NPD). The general research supporting this specific study aims to conceptualise in the area of newly and futuristic aircraft configurations. Hence, this same topic based the conceptualisation process in the conducted ideation sessions, which are conducted by five different teams of three elements each. The results of the different ideation sessions reinforce the contemporary paradigm of Open Innovation (OI), which is based in trust and communication to better collaborate. The postulated hypothesis for this study is partially validated as teams testing the proposed and structured model generally consider that its usage would benefit the integration of different disciplines. Besides, a general feeling that a structured approach integrates different perspectives and gives creativity a focus pervades. Nevertheless, the small-scale of the design experiment attributes some limitations to this study, despite giving new insights in how to better organise coming and more sustained studies. Interestingly, the importance of sketching as an interdisciplinary means of communication is underlined with the obtained results.

Analysis and improvements of four-wire power converters for electric vehicle chargers

A robust and well-distributed backbone charging network is the priority to ensure widespread electrification of road transport, providing a driving experience similar to that of internal combustion engine vehicles. International standards set multiple technical targets for on-board and off-board electric vehicle chargers; output voltage levels, harmonic emissions, and isolation requirements strongly influence the design of power converters. Additionally, smart-grid services such as vehicle-to-grid and vehicle-to-vehicle require the implementation of bi-directional stages that inevitably increase system complexity and component count. To face these design challenges, the present thesis provides a rigorous analysis of four-leg and split-capacitor three-phase four-wire active front-end topologies focusing on the harmonic description under different modulation techniques and conditions. The resulting analytical formulation paves the way for converter performance improvements while maintaining regulatory constraints and technical requirements under control. Specifically, split-capacitor inverter current ripple was characterized as providing closed-form formulations valid for every sub-case ranging from synchronous to interleaved PWM. Outcomes are the base for a novel variable switching PWM technique capable of mediating harmonic content limitation and switching loss reduction. A similar analysis is proposed for four-leg inverters with a broad range of continuous and discontinuous PWM modulations. The general superiority of discontinuous PWM modulation in reducing switching losses and limiting harmonic emission was demonstrated. Developments are realized through a parametric description of the neutral wire inductor. Finally, a novel class of integrated isolated converter topologies is proposed aiming at the neutral wire delivery without employing extra switching components rather than the one already available in typical three-phase inverter and dual-active-bridge back-to-back configurations. The fourth leg was integrated inside the dual-active-bridge input bridge providing relevant component count savings. A novel modified single-phase-shift modulation technique was developed to ensure a seamless transition between working conditions like voltage level and power factor. Several simulations and experiments validate the outcomes.

Radiation characteristics enhancement of planar structures using metasurfaces

In this thesis, the focus is on utilizing metasurfaces to improve radiation characteristics of planar structures. The study encompasses various aspects of metasurface applications, including enhancing antenna radiation characteristics and manipulating electromagnetic (EM) waves, such as polarization conversion and anomalous reflection. The thesis introduces the design of a single-port antenna with dual-mode operation, integrating metasurfaces. This antenna serves as the front-end for a next-generation tag, functioning as a position sensor with identification and energy harvesting capabilities. It operates in the lower European Ultra-Wideband (UWB) frequency range for communication/localization and the UHF band for wireless energy reception. The design aims for a low-profile stack-up that remains unaffected by background materials. Researchers worldwide are drawn to metasurfaces due to their EM wave manipulation capabilities. The thesis also demonstrates how a High-Impedance Surface (HIS) can enhance the antenna's versatility through metasurface application, including conformal design using 3D-printing technology, ensuring adaptability for various deformation and tracking/powering scenarios. Additionally, the thesis explores two distinct metasurface applications. One involves designing an angularly stable super-wideband Circular Polarization Converter (CPC) operating from 11 to 35GHz with an impressive relative impedance bandwidth of 104.3%. The CPC shows a stable response even at oblique incidences up to 40 degrees, with a Peak Cross-Polarization Ratio (PCR) exceeding 62% across the entire band. The second application focuses on an Intelligent Reflective Surface (IRS) capable of redirecting incoming waves in unconventional directions. Tunability is achieved through an artificially developed ferroelectric material (HfZrO) and distributed capacitive elements (IDC) to fine-tune impedance and phase responses at the meta-atom level. The IRS demonstrates anomalous reflection for normal incident waves. These innovative applications of metasurfaces offer promising advancements in antenna design, EM wave manipulation, and versatile wireless communication systems.

Progettazione di un sistema di business intelligence per offerwall incentivati

Lo scopo del presente elaborato è ottenere dati grezzi dai maggiori offerwalls affinché si renda possibile elaborarli ed analizzarli per metterli a disposizione delle figure che si occupano di account management di un potenziale Ad Network quale è MyAppFree. Il primo Ad Network competitor a venire integrato nel presente tool di Business Intelligence è OfferToro, seguito da AdGem, il quale è attualmente in fase di integrazione. Prima di presentare i risultati del tool, a cui è stato dedicato l’ultimo capitolo dell’elaborato, sono stati approfonditi ed analizzati ampiamente i concetti fondamentali per la comprensione del progetto insieme agli strumenti utilizzati per la costituzione dell’architettura software. Successivamente, viene presentata l'architettura dei singoli microservizi oltre a quella sistemistica generale, la quale tratta come le parti che compongono iBiT, interagiscono tra loro. Infine, l’ultima parte della trattazione è dedicata al funzionamento del Front End Side per la figura account manager, che rappresenta l’utente finale del progetto. Unita alle analisi dei risultati ottenuti tramite una fase di benchmark testing, metrica che misura un insieme ripetibile di risultati quantificabili che serve come punto di riferimento perché prodotti e servizi possano essere confrontati. Lo scopo dei risultati dei test di benchmark è quello di confrontare le versioni presenti e future del software tramite i rispettivi benchmark.

Calibration of the detector flight models for the HERMES and SPIRIT nanosatellite missions

The High Energy Rapid Modular Ensemble of Satellites (HERMES) is a new mission concept involving the development of a constellation of six CubeSats in low Earth orbit with new miniaturized instruments that host a hybrid Silicon Drift Detector/GAGG:Ce based system for X-ray and γ-ray detection, aiming to monitor high-energy cosmic transients, such as Gamma Ray Bursts and the electromagnetic counterparts of gravitational wave events. The HERMES constellation will also operate together with the Australian-Italian SpIRIT mission, which will house a HERMES-like detector. The HERMES pathfinder mini-constellation, consisting of six satellites plus SpIRIT, is likely to be launched in 2023. The HERMES detectors are based on the heritage of the Italian ReDSoX collaboration, with joint design and production by INFN-Trieste and Fondazione Bruno Kessler, and the involvement of several Italian research institutes and universities. An application-specific, low-noise, low-power integrated circuit (ASIC) called LYRA was conceived and designed for the HERMES readout electronics. My thesis project focuses on the ground calibrations of the first HERMES and SpIRIT flight detectors, with a performance assessment and characterization of the detectors. The first part of this work addresses measurements and experimental tests on laboratory prototypes of the HERMES detectors and their front-end electronics, while the second part is based on the design of the experimental setup for flight detector calibrations and related functional tests for data acquisition, as well as the development of the calibration software. In more detail, the calibration parameters (such as the gain of each detector channel) are determined using measurements with radioactive sources, performed at different operating temperatures between -20°C and +20°C by placing the detector in a suitable climate chamber. The final part of the thesis involves the analysis of the calibration data and a discussion of the results.

CartBot: un’applicazione di chat bot mobile per l’e-grocery

Sempre più negli ultimi anni si interagisce con i chatbot, software che simulano una conversazione con un essere umano utilizzando il linguaggio naturale. L’elaborato di tesi mira ad uno studio più approfondito della tematica, a partire da come tale tecnologia si è evoluta nel corso degli anni. Si procede analizzando le principali applicazioni dei bot, soffermandosi anche sui cambiamenti apportati dalla pandemia di Covid-19, ed evidenziando le principali ragioni che portano aziende e singoli al loro utilizzo. Inoltre, vengono descritti i diversi tipi di bot esistenti e viene analizzato il Natural Language Processing, ramo dell’Intelligenza Artificiale che mira alla comprensione del linguaggio naturale. Nei capitoli successivi viene descritto il progetto CartBot, un’applicazione di chat mobile per l’e-grocery, implementata come un chatbot che guida il cliente all’acquisto della spesa online. Vengono descritte le tecnologie utilizzate, con particolare riferimento al software di Google Dialogflow, che permette di sviluppare bot; inoltre viene analizzata come è stata effettuata la progettazione, sia lato front-end che back-end, allegando il flowchart, un diagramma di flusso realizzato per definire la sequenza di azioni e passaggi richiesti dal bot per effettuare l’acquisto. Infine, sono descritte le varie sottosezioni di CartBot, che riguardano la visualizzazione dei prodotti e il completamento dell’ordine, allegando screenshot dell’interfaccia finale ottenuta e inserendo il codice di alcune funzioni rilevanti.

The End of the World Wide Web

Nothing lasts forever. The World Wide Web was an essential part of life for much of humantiy in the early 21st century, but these days few people even remember that it existed. Members of the Web Science research group will present several possible scenarios for how the Web, as we know it, could cease to be. This will be followed by an open discussion about the future we want for the Web and what Web Science should be doing today to help make that future happen, or at least avoid some of the bad ones.

Helping End-Users “Engineer” Dependable Web Applications

End-user programmers are increasingly relying on web authoring environments to create web applications. Although often consisting primarily of web pages, such applications are increasingly going further, harnessing the content available on the web through “programs” that query other web applications for information to drive other tasks. Unfortunately, errors can be pervasive in web applications, impacting their dependability. This paper reports the results of an exploratory study of end-user web application developers, performed with the aim of exposing prevalent classes of errors. The results suggest that end-users struggle the most with the identification and manipulation of variables when structuring requests to obtain data from other web sites. To address this problem, we present a family of techniques that help end user programmers perform this task, reducing possible sources of error. The techniques focus on simplification and characterization of the data that end-users must analyze while developing their web applications. We report the results of an empirical study in which these techniques are applied to several popular web sites. Our results reveal several potential benefits for end-users who wish to “engineer” dependable web applications.

Analysis and Transformation of Pipe-like Web Mashups for End User Programmers

Mashups are becoming increasingly popular as end users are able to easily access, manipulate, and compose data from several web sources. To support end users, communities are forming around mashup development environments that facilitate sharing code and knowledge. We have observed, however, that end user mashups tend to suffer from several deficiencies, such as inoperable components or references to invalid data sources, and that those deficiencies are often propagated through the rampant reuse in these end user communities. In this work, we identify and specify ten code smells indicative of deficiencies we observed in a sample of 8,051 pipe-like web mashups developed by thousands of end users in the popular Yahoo! Pipes environment. We show through an empirical study that end users generally prefer pipes that lack those smells, and then present eleven specialized refactorings that we designed to target and remove the smells. Our refactorings reduce the complexity of pipes, increase their abstraction, update broken sources of data and dated components, and standardize pipes to fit the community development patterns. Our assessment on the sample of mashups shows that smells are present in 81% of the pipes, and that the proposed refactorings can reduce that number to 16%, illustrating the potential of refactoring to support thousands of end users developing pipe-like mashups.