Agricultural development and macroeconomic balance in Latin America: an overview of some basic policy issues

Includes bibliography

A simple procedure for the preparation of laponite and thermoplastic starch nanocomposites: Structural, mechanical, and thermal characterizations

The aim of this article is to propose advances for the preparation of hybrid nanocomposites prepared by the combination of intercalation from solution and melt-processing methods. This research investigates the effect of the laponite RDS content on the thermal, structural, and mechanical properties of thermoplastic starch (TPS). X-ray diffraction was performed to investigate the dispersion of the laponite RDS layers into the TPS matrix. The results show good nanodispersion, intercalation, and exfoliation of the clay platelets, indicating that these composites are true nanocomposites. The presence of laponite RDS also improves the thermal stability and mechanical properties of the TPSmatrix due to its reinforcement effect which was optimized by the high degree of exfoliation of the clay. Thus, these results indicate that the exfoliated TPS-laponite nanocomposites have great potential for industrial applications and, more specifically, in the packaging field. © The Author(s) 2011 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Evaluation of weather influence on mechanical and viscoelastic properties of polyetherimide/carbon fiber composites

In order to investigate how environmental degradation affects the mechanical and thermal performance of polyetherimide/carbon fiber laminates, in this work different weathering were conducted. Additionally, dynamic mechanical analysis, interlaminar shear strength tests and non-destructive inspections were performed on this composite before and after being submitted to hygrothermal, UV radiation and thermal shock weathering. According to our results, hygrothermally aged samples had their glass transition temperature and elastic and storage moduli reduced by plasticization effect. Photooxidation, due to UV radiation exposure, occurred only on the surface of the laminates. Thermal shock induced a reversible stress on the composite's interface region. The results revealed that the mechanical behavior can vary during weather exposure but since this variation is only subtle, this thermoplastic laminate can be considered for high-performance applications, such as aerospace. © The Author(s) 2013.

Evaluation of mechanical and thermal properties after chemical degradation of PVC and HDPE geomembranes

Chemical compatibility between geomembranes and site-specific waste liquids should be assessed since the waste liquids are highly complex mixtures. This paper presents some considerations about the chemical compatibility of geomembranes and some results of mechanical tests in HDPE and PVC geomembranes that were exposed to leachate and chemical residue (niobium). PVC and HDPE geomembranes of two thicknesses were tested: 1.0, 2.0 mm (PVC) and 0.8, 2.5 mm (HDPE). The results obtained show that after exposure the PVC geomembranes (1.0, 2.0 mm) were more rigid and stiffer than fresh samples. The HDPE geomembranes, on the other hand, when exposed to leachate and niobium residue presented increases in deformation. Melt flow index (MFI) tests were also carried out to verify the oxidation. © 2013 ejge.

Resolución 428(XIX): Comercio agrícola y seguridad alimentaria = Resolution 428(XIX): Agricultural trade and food security = Résolution 428(XIX): Commerce agricole et sécurité alimentaire

Publicado separadamete en cada idioma

Mechanical and tribological properties of a-C:H:F Thin Films

a-C:H films were grown by plasma-enhanced chemical vapor deposition in atmospheres composed by 30 % of acetylene and 70 % of argon. Radiofrequency signal (RF) was supplied to the sample holder to generate the depositing plasmas. Deposition time and pressure were chosen 300 s and 9.5 Pa, respectively, while the excitation power changed from 5 to 125 W. The films were exposed to a post-deposition treatment during 300 s in RF-plasmas (13.56 MHz, 70 W) excited from 13.33 Pa of SF6. Raman and X-ray photoelectron spectroscopy were used to evaluate the microstructure and chemical composition of the films. The thickness was measured by perfilometry. Hardness and friction coefficient were determined from nanoindentation and risk tests, respectively. With increasing power, the film thickness reduced, but a further shrinkage occurred upon the fluorination process. After that, the molecular structure was observed to vary with deposition power. Fluorine was detected in all samples replacing H atoms. Consistently with the elevation in the proportion of C atoms with sp3 hybridization, hardness increased from 2 to 18 GPa. Friction coefficient also increased with power due to the generation of dangling bonds during the fluorination process. © 2012 Springer Science+Business Media, LLC.

Resolución 12: Precios agrícolas y otras medidas = Resolution 12: Agricultural prices and crop insurance = Résolution 12: Prix agricoles et assurance des récoltes

El símbolo E/840/Rev.1 corresponde a la edición bilingüe inglés/francés publicada en 1953

Optical, mechanical and surface properties of amorphous carbonaceous thin films obtained by plasma enhanced chemical vapor deposition and plasma immersion ion implantation and deposition

Diverse amorphous hydrogenated carbon-based films (a-C:H, a-C:H:F, a-C:H:N, a-C:H:Cl and a-C:H:Si:O) were obtained by radiofrequency plasma enhanced chemical vapor deposition (PECVD) and plasma immersion ion implantation and deposition (PIIID). The same precursors were used in the production of each pair of each type of film, such as a-C:H, using both PECVD and PIIID. Optical properties, namely the refractive index, n, absorption coefficient, α, and optical gap, ETauc, of these films were obtained via transmission spectra in the ultraviolet-visible near-infrared range (wavelengths from 300 to 3300 nm). Film hardness, elastic modulus and stiffness were obtained as a function of depth using nano-indentation. Surface energy values were calculated from liquid drop contact angle data. Film roughness and morphology were assessed using atomic force microscopy (AFM). The PIIID films were usually thinner and possessed higher refractive indices than the PECVD films. Determined refractive indices are consistent with literature values for similar types of films. Values of ETauc were increased in the PIIID films compared to the PECVD films. An exception was the a-C:H:Si:O films, for which that obtained by PIIID was thicker and exhibited a decreased ETauc. The mechanical properties - hardness, elastic modulus and stiffness - of films produced by PECVD and PIIID generally present small differences. An interesting effect is the increase in the hardness of a-C:H:Cl films from 1.0 to 3.0 GPa when ion implantation is employed. Surface energy correlates well with surface roughness. The implanted films are usually smoother than those obtained by PECVD. ©2013 Elsevier B.V. All rights reserved.

Informe del Seminario Regional sobre Expansión de la Frontera Agropecuaria y Medio Ambiente en América Latina = Report of the Regional Seminar on the Expansion of the Agricultural Frontier and the Environment in Latin America

Informe del Seminario efectuado para analizar las caracteristicas de la expansion de la frontera agropecuaria en la region y su relacion con el estilo de desarrollo predominante, resaltando los aspectos ambientales y sociales del proceso, para recomendar politicas de desarrollo optativas que permitan realizar el proceso de expansion aludido minimizando el costo ambiental y social. Incluye lista de participantes y de documentos presentados.

Application of the concepts of agro-tourism, agricultural diversification and food and nutrition for the development of Caribbean communities with reference to standards and priority setting

Introduction There is a renewed call for a new approach to development with emphasis on community empowerment or participation, with the belief that more sustainable activities will be undertaken in those communities. Much of that call, however, is coming not from within the communities, but primarily from advocates of change who may have little to do with those communities. What then will the new approach bring apart from a change in who are the decision-makers? And how do we ensure that the change that is called for will, in fact, bring added benefits to the communities themselves? To be sure, there are some successful stories of a community approach to problem solving. However, there are also many more stories of project failures. Serious analytical work, therefore, needs to be done to determine the factors that promote a successful community-based approach; when this approach should be used; and the methodology that should be employed. In an attempt to determine these factors, a brief analysis will be made of some of the governing structures in the subregion and their possible impact on the proposed new approach. Some of the earlier efforts at stakeholder and community approach to projects will also be examined as well as the new development strategy that is prompting the call for this new paradigm. The new paradigm focuses to a large extent on decision-making and community empowerment. With few exceptions, it is short on the promotion of tangible activities that are based on the resource inventory of the communities. This is not surprising, since, as noted before, the advocates of community empowerment may have very little connection with the communities and, in most cases, are unfamiliar with the resource base. Hence, a theoretical case is made, suggesting more style than substance. Another obvious shortcoming of this new paradigm is its continued over- dependence on assistance from the outside to build communities. Externally funded projects, seminars and meetings outside of the communities and foreign technical assistance continue to dominate these projects. While, of course, all communities have basic common needs such as water, health, education and electricity, there is sufficient diversity within communities to allow for tailoring of activities and programmes such that their differences become assets. It is in that context, that agro-tourism activities, standards, agricultural diversification, food and nutrition and priority setting have been chosen as aspects and activities for promoting community development, drawing on the various strengths of communities, rural or urban.

Agricultural transformation and Gender considerations in Caribbean Economics

The aim of this paper is to provide an overview of the gender and social disparities existing in the agricultural and rural sector in Caribbean economies. In this context, agricultural transformation as occasioned by the dismantling of preferential trading arrangements is analysed to identify the most relevant gender discriminatory measures in the current agricultural development policy and programmes. The analysis seeks to provide the basis for enhancing understanding among policy makers, planners and rural development practitioners of the gender and social dimension involved in the formulation of agricultural policy and more specifically in relation to the new policy and institutional arrangements for agriculture in the region. The paper also provides insights regarding what changes should take place to create an enabling environment for more gender-based approaches to policy-making and strategic planning in agricultural development and trade in the Caribbean. The methodology centred on the review of secondary sources that provide references on the new challenges, opportunities and constraints faced by the agricultural sector, in particular small farmers, in the context of globalization and agriculture transformation. Much of the literature for this assignment was obtained from FAO Headquarters in Rome and the FAO Subregional Office in Barbados, as well as the OECS Secretariat in St. Lucia. In the process of the review exercise, due consideration was given to changes in agricultural production patterns, resources allocation and rural livelihoods. Efforts to examine the most relevant policy measures and mechanisms in-place in support to agricultural development in the region were constrained, in the main, by the absence of gender disaggregated data. Documentation as regards the situation of women and men in relation to agricultural labour, rural income and food security situation in regions were limited. The use of the internet served to bridge the communication gap between countries and institutions. The preliminary draft of the paper was presented and discussed at the FAO/ECLAC/UNIFEM regional workshop on mainstreaming gender analysis in agriculture and trade policies, for Caribbean countries, in November 2003. The second draft of the paper was informed by comments from the workshop and additional information acquired through field visits to Barbados, St. Kitts and St. Vincent in March 2004. The three day visits to each of these three countries entailed a review/appreciation of the resource, constraints and institutional capacities for gender mainstreaming within the agricultural sector at the national level. This included visits to some of the major agricultural projects and interviews with farmers (where feasible) in respect of their perspective of the current situation of the agricultural sector and the viability of their farm enterprises. As well, meetings were held with relevant/available officials within the respective ministries of agriculture to discern the gender consideration as regards agricultural policy and planning at the country level. The internet was invaluable to the task of sourcing supplementary information to satisfy the aim of the paper; in respect of the identification of concrete policy measures and actions to formulate and develop more gender/social-responsive agricultural development policies. The final revision, though thwart with resource and communication constraints, was ultimately completed in compliance with the structure and approach proposed in the terms of references for this FAO/ECLAC assignment.

Investigation of thermal, mechanical and magnetic behaviors of the Cu-11%Al alloy with Ag and Mn additions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Different patterns between mechanical and electrical activities: an approach to investigate gastric motility in a model of long-term diabetic rats

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mechanical and Thermal Properties of Thermoplastic Random Copolyesters Made from Lipid- Derived Medium and Long Chain Poly (x-hydroxyfatty acid) s

The physical properties of novel thermoplastic random copolyesters [-(CH2)(n)-COO-/-(CH2)(n)-COO-](x) made of long (n=12) and medium (n=8) chain length -hydroxyfatty esters [HO-(CH2)(n)-COOCH3] derived from bio-based vegetable oil feedstock are described. Poly(-hydroxy tridecanoate/-hydroxy nonanoate) P(-Me13-/-Me9-) random copolyesters (M-n=11,000-18,500 g/mol) with varying molar ratios were examined by TGA, DSC, DMA and tensile analysis, and WAXD. For the whole range of P(-Me13-/-Me9-) compositions, the WAXD data indicated an orthorhombic polyethylene-like crystal packing. Their melting characteristics, determined by DSC, varied with composition suggesting an isomorphic cocrystallization behavior. TGA of the P(-Me13-/-Me9-)s indicated improved thermal stability determined by their molar compositions. The glass transition temperature, investigated by DMA, was also found to vary with composition. The crystallinities of P(-Me13-/-Me9-)s however, were unaffected by the composition. The stiffness (Young's modulus) of these materials was found to be related to their degrees of crystallinity. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40492.