Toxicidade residual de alguns agrotóxicos recomendado na agricultura sobre Neoseiulus californicus (McGregor) (Acari: Phytoseiidae)

O objetivo do trabalho foi avaliar a toxicidade residual de alguns agrotóxicos utilizados em citros sobre Neoseiulus californicus (McGregor) em condições de laboratório. O método de bioensaio adotado foi o de contato residual. Folhas de citros da variedade Pêra, acondicionadas em arenas, foram pulverizadas em torre de Potter. A toxicidade residual dos produtos foi avaliada duas horas e 1; 3; 5; 7; 10; 14 e 21 dias após a aplicação. em cada arena, foram transferidas dez fêmeas adultas de N. californicus, juntamente com uma quantidade suficiente de Tetranychus urticae, como fonte de alimento. As avaliações de mortalidade foram realizadas 72 horas após a transferência dos ácaros para as arenas. Os agrotóxicos acrinathrin, deltamethrin, dinocap, enxofre, fenpropathrin, óxido de fenbutatin e propargite não causaram mortalidades significativas em adultos de N. californicus. Foram registradas mortalidades de 29,8; 24,0 e 34,1% para ácaros N. californicus expostos a resíduos de duas horas de idade de abamectim, azocyclotin e cyhexatin, respectivamente. Dicofol, pyridaben e chlorfenapyr causaram 100% de mortalidade aos ácaros predadores expostos aos resíduos tóxicos dos acaricidas, com duas horas de idade. Abamectin provocou mortalidade significativa por um período inferior a um dia. Resíduos dos acaricidas azocyclotin, cyhexatin, dicofol, pyridaben e chlorfenapyr provocaram mortalidades significativas por períodos de 1; 1; 10; 10 e 21dias, respectivamente. Os resultados obtidos no presente experimento servem de subsídio para a escolha adequada dos agrotóxicos a serem utilizados em pomares de citros nos quais N. californicus esteja presente ou naqueles em que o predador venha a ser liberado. Esses resultados também servem para a escolha do momento mais favorável para a liberação dos ácaros predadores dessa espécie no campo, após a aplicação de agrotóxicos nos pomares. Estudos conduzidos em condições de campo ainda são necessários para se compreender melhor o efeito desses agrotóxicos sobre o ácaro predador.

Toxicidade diferencial de agrotóxicos utilizados em citros para Neoseiulus californicus, Euseius concordis e Brevipalpus phoenicis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação microbiológica de um processo de sanificação de galões de água com a utilização do ozônio

O Brasil é o sétimo maior consumidor mundial de águas engarrafadas. Os recipientes mais utilizados, galões plásticos de 20 litros, devem ser submetidos à inspeção individual e posteriormente a sanificação. Recentemente, enfermidades associadas a microrganismos emergentes têm despertado o interesse por novos sanitizantes. Entre estes, o gás ozônio é um dos mais atraentes em virtude da sua segurança e eficácia superiores aos desinfetantes convencionais, não gerando resíduos tóxicos. Neste trabalho, o ozônio foi avaliado como método alternativo na sanificação de galões de água de 20 litros, na cidade de Alfenas, MG. Trinta galões foram avaliados sem tratamento e trinta após a sanificação com água ozonizada (4mg/L/2minutos) quanto à contagem total de microrganismos aeróbios mesófilos heterotróficos, número mais provável (NMP) de coliformes totais e Escherichia coli, Staphyloccocus aureus e Pseudomonas spp. em 100mL de solução enxaguatória. A contagem média de unidades formadoras de colônias (UFC) de microrganismos heterotróficos no estágio de pré-lavagem foi de 5,7/cm² enquanto que o tratamento com a água ozonizada reduziu este valor para 0,003/cm², além de promover a negativação das análises para coliformes Pseudomonas ssp. e somente 13,3% das amostras apresentaram-se positivas para Staphylococcus aureus após a sanificação. Concluiu-se que o tratamento com utilização de ozônio foi eficiente, nas condições testadas.

Sensibilidade de fungos entomopatogênicos a agroquímicos usados no manejo da cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chemical composition and fermentation characteristics of elephant grass silage with biodiesel industry co-products

The objective of this research was to evaluate the effect of three concentrations (3, 6, and 9%) of forage turnip (Raphanus sativus) and physic nut (Jatropha curcas) cakes on dry matter, crude protein, ether extract, neutral detergent fiber, acid detergent fiber, lignin, acid detergent insoluble nitrogen neutral detergent insoluble nitrogen contents, in vitro dry matter digestibility, pH values and concentrations of N-NH3 in elephant grass silages. It was used an entirely randomized design in factorial arrangement [(2x3)+1]. Experimental PVC silos were used and ensiled material was kept for 62 days. The addition of cakes increased the dry matter contents (P<0.05). The fibrous fractions were reduced (P<0.05) with the inclusion of cakes during the grass ensilage and the CP contents increased (P<0.05). The forage turnip cake provided the same pH and N-NH3 values in ideal levels and the physic nut, added to 9%, increased those values (P<0.05). IVDMD was reduced (P<0.05) when the cakes were added. These co-products can be used in small amounts for elephant grass ensilage in order to provide improvement in chemical and fermentation characteristics of the silages. Nevertheless, physic nut cake shows limitations for its use in animal feeding due to the presence of toxic compounds, making necessary studies for their identification and elimination.

Níveis do subproduto concentrado da produção de lisina em dietas com alto concentrado para tourinhos Santa Gertrudes em terminação

O experimento foi realizado objetivando-se caracterizar o subproduto concentrado da produção de lisina (SPL) e avaliar o desempenho e as características de carcaça de tourinhos Santa Gertrudes confinados recebendo níveis crescentes desse subproduto na dieta. O SPL resulta do processo de produção de lisina e é parcialmente seco. Apresentou aproximadamente 38% de matéria seca e 85% de proteína bruta na matéria seca, sendo que 79% desse nitrogênio encontrava-se na forma não-protéica. Não foram observados metais pesados em níveis tóxicos. Vinte e sete animais, com dez meses de idade e peso inicial de 242 kg, receberam silagem de milho, 80% de concentrado e 0; 4,5 ou 9,0% de SPL na matéria seca da dieta. O período experimental foi de 115 dias, após 56 dias de adaptação. A inclusão do SPL na dieta determinou efeito quadrático sobre o ganho de peso, o consumo diário de matéria seca, o peso final e o peso de carcaça; efeito linear decrescente sobre a eficiência alimentar e o rendimento de carcaça; e aumento da espessura de gordura de cobertura e do peso do fígado. Não foram observadas diferenças entre tratamentos para a área de olho de lombo. As diferenças no desempenho não foram associadas ao menor consumo de alimentos ou ao teor de enxofre das dietas. O nível de 3,7% de SPL na matéria seca da dieta foi considerado o máximo recomendado para tourinhos em terminação recebendo dietas com alto teor de energia, quando o ganho diário de peso esperado seria de 1,23 kg/animal.

Desenvolvimento de um sistema de automação para uma planta de inertização de resíduos por plasma

The traditional processes for treatment of hazardous waste are questionable for it generates other wastes that adversely affect people s health. As an attempt to minimize these problems, it was developed a system for treatment of hazardous waste by thermal plasma, a more appropriate technology since it produces high temperatures, preventing the formation of toxic pollutants to human beings. The present work brings out a solution of automation for this plant. The system has local and remote monitoring resources to ensure the operators security as well as the process itself. A special attention was given to the control of the main reactor temperature of the plant as it is the place where the main processing occurs and because it presents a complex mathematical model. To this, it was employed cascaded controls based on Fuzzy logic. A process computer, with a particular man-machine interface (MMI), provides information and controls of the plant to the operator, including by Internet. A compact PLC module is in charge of the central element of management automation and plant control which receives information from sensors, and sends it to the MMI

Análise das emissões atmosféricas por veículos automotores em Natal-RN

The fast urban occupation of Brazil, mainly from the last decade of 50, a sensible degradation of the quality of the air generated mainly for the activities was verified human beings associates to industrialization. From the past years, the situation has gotten worst in function of the increment of the fleet of vehicles in circulation in the great cities. Being these, in the city of Natal-RN, the ones that offer the biggest contributions to the atmospheric pollution. For atmospheric air to be a finite natural resources, indispensable and essential to the maintenance of the life in the land, is necessary to the implementation of action to improve its quality and to protect the health of the population. With the objective to study relative aspects to the characteristics of vehicles in use, the present study it searchs to analyze the levels of emissions of gases generated for vehicles converted bi-fuels into the modalities: natural gas (GNV), gasoline and alcohol, inspected for ends of register and together licensing to the State Department of Transit. One used the data gotten from inspections carried through for the company System Specialized in Inspection To propagate, in the city of the Natal-RN, capital of the State of Rio Grande do Norte, between 14 of November of 2003 and 30 of December of 2004. The analyzed parameters are established in the resolution nº 07/93 CONAMA. Of a total of 1.517 inspected vehicles, a average of 15,2% of failed was gotten, or either, that they emit levels of pollution above of the limits established for the legislation, below of the national average that is of 20,0%. The analysis of the data discloses that 7.3% of the fleet are converted the GNV; the growth of vehicles converted the GNV into the city is gradual, with a average of increment in last the 4 years of 23,3%; it has a vehicle predominance that has as combustible original to the gasoline (88,2%); the inspected fleet has average age of 8 years of use, considered young for the Brazilian standards, except for the moved one to the alcohol (average of use of 15 years). Moreover, the type of fuel is not the main parameter to define the indices of emissions; the age of the fleet is the parameter most important when emission is analyzed to propagate; the gas that more generates failed in the inspections is the corrected carbon monoxide; the vehicles generate higher indices of emissions in idling for all the fuels; the presence of the catalyser was not reflected, as it expected, in the reduction of emissions of gases toxic, however when analyzed according to year of manufacture, it was observed that for the vehicles manufactured between 1997 and 2004, reduction of 46,0% in the failed of the vehicles equipped with catalyser was gotten. In conclusion, the fleet of the studied sample, in average terms, takes care of to the requirements of Resolution CONAMA nº 07/93. The results gotten for the present study can subsidize action of public administrations that aim at to the improvement and the maintenance of the quality of air in the city of Natal-RN, as, for example, to implant a net of monitoramento of the quality of air

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry

Extração do óleo e caracterização dos resíduos da borra de petróleo para fins de reuso

The petroleum industry, in consequence of an intense activity of exploration and production, is responsible by great part of the generation of residues, which are considered toxic and pollutants to the environment. Among these, the oil sludge is found produced during the production, transportation and refine phases. This work had the purpose to develop a process to recovery the oil present in oil sludge, in order to use the recovered oil as fuel or return it to the refining plant. From the preliminary tests, were identified the most important independent variables, like: temperature, contact time, solvents and acid volumes. Initially, a series of parameters to characterize the oil sludge was determined to characterize its. A special extractor was projected to work with oily waste. Two experimental designs were applied: fractional factorial and Doehlert. The tests were carried out in batch process to the conditions of the experimental designs applied. The efficiency obtained in the oil extraction process was 70%, in average. Oil sludge is composed of 36,2% of oil, 16,8% of ash, 40% of water and 7% of volatile constituents. However, the statistical analysis showed that the quadratic model was not well fitted to the process with a relative low determination coefficient (60,6%). This occurred due to the complexity of the oil sludge. To obtain a model able to represent the experiments, the mathematical model was used, the so called artificial neural networks (RNA), which was generated, initially, with 2, 4, 5, 6, 7 and 8 neurons in the hidden layer, 64 experimental results and 10000 presentations (interactions). Lesser dispersions were verified between the experimental and calculated values using 4 neurons, regarding the proportion of experimental points and estimated parameters. The analysis of the average deviations of the test divided by the respective training showed up that 2150 presentations resulted in the best value parameters. For the new model, the determination coefficient was 87,5%, which is quite satisfactory for the studied system

Boro em arroz de terras altas cultivado em solução nutritiva

O objetivo deste trabalho foi avaliar o efeito de doses de boro na produção de matéria seca e nos parâmetros morfológicos das raízes de duas cultivares de arroz de terras altas. O experimento foi desenvolvido de abril a julho de 2004, em casa de vegetação, em Botucatu (SP), empregando-se duas cultivares de arroz - Caiapó e BRS Talento. As plântulas foram obtidas em condições controladas e após cinco dias, transferidas para vasos de plástico com capacidade para 8 L, utilizando areia lavada como suporte, deixando quatro plantas por vaso. Os tratamentos foram: 0,0; 0,5; 1,0; 2,0; 4,0 e 8,0 mg L-1 de B, aplicados via solução nutritiva. O corte foi realizado aos 70 dias após o transplante, sendo coletadas parte aérea e sistema radicular separadamente, determinado suas matérias secas e concentrações de N e B, bem como o comprimento, área superficial e diâmetro médio radicular. Não foi possível obter efeito positivo da aplicação de boro, evidenciando que para a cultura do arroz a dose ótima é a inferior a 0,5 ml L-1 de B. A aplicação de 3,8 e 3,4 mg L-1 de B causou efeitos tóxicos às cultivares Caiapó e Talento respectivamente. O limite de toxicidade para raízes das duas cultivares é a concentração de 2,7 mg L-1 de B. Sob toxicidade severa de B as plantas de arroz reduzem expressivamente o comprimento e aumentam o diâmetro radicular, resultando em menor área de absorção de nutrientes.

Degradação fotoquímica de hidrocarbonetos da gasolina em efluentes aquosos

Photo-oxidation processes of toxic organic compounds have been widely studied. This work seeks the application of the photo-Fenton process for the degradation of hydrocarbons in water. The gasoline found in the refinery, without additives and alcohol, was used as the model pollutant. The effects of the concentration of the following substances have been properly evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM) and sodium chloride (200 2000 ppm). The experiments were accomplished in reactor with UV lamp and in a falling film solar reactor. The photo-oxidation process was monitored by measurements of the absorption spectra, total organic carbon (TOC) and chemical oxygen demand (COD). Experimental results demonstrated that the photo-Fenton process is feasible for the treatment of wastewaters containing aliphatic hydrocarbons, inclusive in the presence of salts. These conditions are similar to the water produced by the petroleum fields, generated in the extraction and production of petroleum. A neural network model of process correlated well the observed data for the photooxidation process of hydrocarbons

Estudo da remoção de compostos orgânicos, benzeno e tolueno, em solução aquosa por processo oxidativo avançado do tipo Fenton

The oil and petrochemical industry is responsable to generate a large amount of waste and wastewater. Among some efluents, is possible find the benzene, toluene, ethilbenze and isomers of xilenes compounds, known as BTEX. These compounds are very volatily, toxic for environment and potencially cancerigenous in man. Oxidative advanced processes, OAP, are unconventional waste treatment, wich may be apply on treatment and remotion this compounds. Fenton is a type of OAPs, wich uses the Fenton s reactant, hydrogen peroxide and ferrous salt, to promove the organic degradation. While the Photo-Fenton type uses the Fenton s reactant plus UV radiation (ultraviolet). These two types of OAP, according to literature, may be apply on BTEX complex system. This project consists on the consideration of the utilization of technologies Fenton and Photo-Fenton in aqueous solution in concentration of 100 ppm of BTEX, each, on simulation of condition near of petrochemical effluents. Different reactors were used for each type of OAP. For the analyticals results of amount of remotion were used the SPME technique (solid phase microextraction) for extraction in gaseous phase of these analytes and the gas chromatography/mass espectrometry The arrangement mechanical of Photo-Fenton system has been shown big loss by volatilization of these compounds. The Fenton system has been shown capable of degradate benzene and toluene compounds, with massic percentage of remotion near the 99%.

Estudo dos parâmetros de extração de fenol de efluentes aquosos por um tensoativo não iônico

Environmental sustainability has become one of the topics of greatest interest in industry, mainly due to effluent generation. Phenols are found in many industries effluents, these industries might be refineries, coal processing, pharmaceutical, plastics, paints and paper and pulp industries. Because phenolic compounds are toxic to humans and aquatic organisms, Federal Resolution CONAMA No. 430 of 13.05.2011 limits the maximum content of phenols, in 0.5 mg.L-1, for release in freshwater bodies. In the effluents treatment, the liquid-liquid extraction process is the most economical for the phenol recovery, because consumes little energy, but in most cases implements an organic solvent, and the use of it can cause some environmental problems due to the high toxicity of this compound. Because of this, exists a need for new methodologies, which aims to replace these solvents for biodegradable ones. Some literature studies demonstrate the feasibility of phenolic compounds removing from aqueous effluents, by biodegradable solvents. In this extraction kind called "Cloud Point Extraction" is used a nonionic surfactant as extracting agent of phenolic compounds. In order to optimize the phenol extraction process, this paper studies the mathematical modeling and optimization of extraction parameters and investigates the effect of the independent variables in the process. A 32 full factorial design has been done with operating temperature and surfactant concentration as independent variables and, parameters extraction: Volumetric fraction of coacervate phase, surfactant and residual concentration of phenol in dilute phase after separation phase and phenol extraction efficiency, as dependent variables. To achieve the objectives presented before, the work was carried out in five steps: (i) selection of some literature data, (ii) use of Box-Behnken model to find out mathematical models that describes the process of phenol extraction, (iii) Data analysis were performed using STATISTICA 7.0 and the analysis of variance was used to assess the model significance and prediction (iv) models optimization using the response surface method (v) Mathematical models validation using additional measures, from samples different from the ones used to construct the model. The results showed that the mathematical models found are able to calculate the effect of the surfactant concentration and the operating temperature in each extraction parameter studied, respecting the boundaries used. The models optimization allowed the achievement of consistent and applicable results in a simple and quick way leading to high efficiency in process operation.

Estudo do equilíbrio líquido-vapor do sistema água+etanol+líquido iônico visando a separação do álcool anidro

Anhydrous ethanol is used in chemical, pharmaceutical and fuel industries. However, current processes for obtaining it involve high cost, high energy demand and use of toxic and pollutant solvents. This problem occurs due to the formation of an azeotropic mixture of ethanol + water, which does not allow the complete separation by conventional methods such as simple distillation. As an alternative to currently used processes, this study proposes the use of ionic liquids as solvents in extractive distillation. These are organic salts which are liquids at low temperatures (under 373,15 K). They exhibit characteristics such as low volatility (almost zero/ low vapor ), thermal stability and low corrosiveness, which make them interesting for applications such as catalysts and as entrainers. In this work, experimental data for the vapor pressure of pure ethanol and water in the pressure range of 20 to 101 kPa were obtained as well as for vapor-liquid equilibrium (VLE) of the system ethanol + water at atmospheric pressure; and equilibrium data of ethanol + water + 2-HDEAA (2- hydroxydiethanolamine acetate) at strategic points in the diagram. The device used for these experiments was the Fischer ebulliometer, together with density measurements to determine phase compositions. The experimental data were consistent with literature data and presented thermodynamic consistency, thus the methodology was properly validated. The results were favorable, with the increase of ethanol concentration in the vapor phase, but the increase was not shown to be pronounced. The predictive model COSMO-SAC (COnductor-like Screening MOdels Segment Activity Coefficient) proposed by Lin & Sandler (2002) was studied for calculations to predict vapor-liquid equilibrium of systems ethanol + water + ionic liquids at atmospheric pressure. This is an alternative for predicting phase equilibrium, especially for substances of recent interest, such as ionic liquids. This is so because no experimental data nor any parameters of functional groups (as in the UNIFAC method) are needed