Analyses of the development and glycoproteins present in the ovarian follicles of Poecilia vivipara (Cyprinodontiformes, Poeciliidae)

The morphofunctional aspects of oogenesis of Poecilia vivipara were studied aiming to understand the reproductive biology and development of species with internal fertilization, particularly those belonging to the family Poeciliidae. The stages of gonadal maturation and follicular development were characterized using mesoscopic, histological, histochemical, and lectin cytochemical analyses. Through mesoscopic evaluation the ovarian development was classified in six phases of development: immature, in maturation I, in maturation II, mature I, mature II, and post-spawn. Based on microscopic examination of the ovaries, we identified the presence of oocytes types I and II during the previtellogenic phase and types III, IV, and V during the vitellogenic phase. As oogenesis proceeded the oocyte cytosol increased in volume and presented increased cytoplasmic granule accumulation, characterizing vitellogenesis. The zona radiata (ZR) increased in thickness and complexity, and the follicular epithelium, which was initially thin and consisting of pavimentous cells, in type III oocytes exhibited cubic simple cells. The histochemical and cytochemical analyses revealed alterations in the composition of the molecular structures that form the ovarian follicle throughout the gonadal development. Our study demonstrated differences in the female reproductive system among fish species with internal and external fertilization and we suggest P. vivipara can be used as experimental model to test environmental toxicity.

Female pelvic floor disorders – outcome after mesh-augmented procedures and studies on vaginal connective tissue

Pelvic floor disorders, such as urinary incontinence (UI) and pelvic organ prolapse (POP), are common disorders in women. Because of the prolonged life expectancy the prevalence of UI and POP and the probability of ending up in surgery are increasing. However, the pathophysiology behind these disorders is still unsolved. The aim of this thesis is to study possible alterations in the connective tissue in the vaginal wall in patients with and without POP. The long-term outcome and complications of mid-urethral slings (MUS) and mesh-augmented POP surgery were studied in heterogenic patient populations. More elastin and a slight increase in immunostaining of type III and V collagens in tissue samples were obtained from patients with POP compared to controls in whom type I collagen was more prominent. The studies assessing the mesh-augmented procedures revealed good efficacy and high patient satisfaction after a long-term follow-up. Patients operated on because of mixed incontinence and with BMI >30 kg/m² reported significantly more urinary symptoms and a lower quality of life than the patients operated on because of stress urinary incontinence and the ones with BMI ≤30 kg/m². The objective outcome was equal between the groups. Mesh exposure through vaginal mucosa occurred in 23 % of the patients after POP surgery, most of these being asymptomatic. There are alterations in connective tissues in patients with POP. Mid-urethral sling procedures produced good long-term cure rates and patient satisfaction. As to the prolapse surgery, in spite of relatively high exposure rate, mesh-augmented procedure proved to be safe and effective method for the correction of POP.

Effect of gallium-arsenide laser, gallium-aluminum-arsenide laser and healing ointment on cutaneous wound healing in Wistar rats

This study determined the effects of gallium-aluminum-arsenide laser (GaAlAs), gallium-arsenide laser (GaAs) and Dersani® healing ointment on skin wounds in Wistar rats. The parameters analyzed were: type I and III collagen fiber concentrations as well as the rate of wound closure. Five wounds, 12 mm in diameter, were made on the animals’ backs. The depth of the surgical incision was controlled by removing the epithelial tissue until the dorsal muscular fascia was exposed. The animals were anesthetized with ketamine and xylazine via intraperitoneal injection. The rats were randomly divided into five groups of 6 animals each, according to the treatment received. Group 1 (L4): GaAs laser (4 J/cm²); group 2 (L30): GaAlAs laser (30 J/cm²); group 3 (L60): GaAlAs laser (60 J/cm²); group 4 (D): Dersani® ointment; group 5 (control): 0.9% saline. The applications were made daily over a period of 20 days. Tissue fragments were stained with picrosirius to distinguish type I collagen from type III collagen. The collagen fibers were photo-documented and analyzed using the Quantum software based on the primary color spectrum (red, yellow and blue). Significant results for wound closing rate were obtained for group 1 (L4), 7.37 mm/day. The highest concentration of type III collagen fibers was observed in group 2 (L30; 37.80 ± 7.10%), which differed from control (29.86 ± 5.15%) on the 20th day of treatment. The type I collagen fibers of group 1 (L4; 2.67 ± 2.23%) and group 2 (L30; 2.87 ± 2.40%) differed significantly from control (1.77 ± 2.97%) on the 20th day of the experiment.

The effect of down-regulation of Smad3 by RNAi on hepatic stellate cells and a carbon tetrachloride-induced rat model of hepatic fibrosis

Searching for effective Smad3 gene-based gene therapies for hepatic fibrosis, we constructed siRNA expression plasmids targeting the rat Smad3 gene and then delivered these plasmids into hepatic stellate cells (HSCs). The effect of siRNAs on the mRNA levels of Smad2, Smad3, Smad4, and collagens I-α1, III-α1 and IV-α1 (Colα1, Col3α1, Col4α1, respectively) was determined by RT-PCR. Eighty adult male Sprague-Dawley rats were randomly divided into three groups. Twice a week for 8 weeks, the untreated hepatic fibrosis model (N = 30) and the treated group (N = 20) were injected subcutaneously with 40% (v/v) carbon tetrachloride (CCl4)-olive oil (3 mL/kg), and the normal control group (N = 30) was injected with olive oil (3 mL/kg). In the 4th week, the treated rats were injected subcutaneously with liposome-encapsulated plasmids (150 µg/kg) into the right liver lobe under general anesthesia once every 2 weeks, and the untreated rats were injected with the same volume of buffer. At the end of the 6th and 8th weeks, liver tissue and sera were collected. Pathological changes were assessed by a semi-quantitative scoring system (SSS), and a radioimmunoassay was used to establish a serum liver fibrosis index (type III procollagen, type IV collagen, laminin, and hyaluronic acid). The mRNA expression levels of the above cited genes were reduced in the HSCs transfected with the siRNA expression plasmids. Moreover, in the treated group, fibrosis evaluated by the SSS was significantly reduced (P < 0.05) and the serum indices were greatly improved (P < 0.01). These results suggest that Smad3 siRNA expression plasmids have an anti-fibrotic effect.

Normal skin and hypertrophic scar fibroblasts differentially regulate collagen and fibronectin expression as well as mitochondrial membrane potential in response to basic fibroblast growth factor

Basic fibroblast growth factor (bFGF) regulates skin wound healing; however, the underlying mechanism remains to be defined. In the present study, we determined the effects of bFGF on the regulation of cell growth as well as collagen and fibronectin expression in fibroblasts from normal human skin and from hypertrophic scars. We then explored the involvement of mitochondria in mediating bFGF-inducedeffects on the fibroblasts. We isolated and cultivated normal and hypertrophic scar fibroblasts from tissue biopsies of patients who underwent plastic surgery for repairing hypertrophic scars. The fibroblasts were then treated with different concentrations of bFGF (ranging from 0.1 to 1000 ng/mL). The growth of hypertrophic scar fibroblasts became slower with selective inhibition of type I collagen production after exposure to bFGF. However, type III collagen expression was affected in both normal and hypertrophic scar fibroblasts. Moreover, fibronectin expression in the normal fibroblasts was up-regulated after bFGF treatment. bFGF (1000 ng/mL) also induced mitochondrial depolarization in hypertrophic scar fibroblasts (P < 0.01). The cellular ATP level decreased in hypertrophic scar fibroblasts (P < 0.05), while it increased in the normal fibroblasts following treatment with bFGF (P < 0.01). These data suggest that bFGF has differential effects and mechanisms on fibroblasts of the normal skin and hypertrophic scars, indicating that bFGF may play a role in the early phase of skin wound healing and post-burn scar formation.

Effect of drying method on the adsorption isotherms and isosteric heat of passion fruit pulp powder

The sorption behavior of dry products is generally affected by the drying method. The sorption isotherms are useful to determine and compare thermodynamic properties of passion fruit pulp powder processed by different drying methods. The objective of this study is to analyze the effects of different drying methods on the sorption properties of passion fruit pulp powder. Passion fruit pulp powder was dehydrated using different dryers: vacuum, spray dryer, vibro-fluidized, and freeze dryer. The moisture equilibrium data of Passion Fruit Pulp (PFP) powders with 55% of maltodextrin (MD) were determined at 20, 30, 40 and 50 ºC. The behavior of the curves was type III, according to Brunauer's classification, and the GAB model was fitted to the experimental equilibrium data. The equilibrium moisture contents of the samples were little affected by temperature variation. The spray dryer provides a dry product with higher adsorption capacity than that of the other methods. The vibro-fluidized bed drying showed higher adsorption capacity than that of vacuum and freeze drying. The vacuum and freeze drying presented the same adsorption capacity. The isosteric heats of sorption were found to decrease with increasing moisture content. Considering the effect of drying methods, the highest isosteric heat of sorption was observed for powders produced by spray drying, whereas powders obtained by vacuum and freeze drying showed the lowest isosteric heats of sorption.

Study of adsorption isotherms of green coconut pulp

Brazil is considered one of the largest producers and consumers of tropical fruits. Green coconut (Cocos nucifera L.) stands out not only for its production and consumption, but also for the high amount of waste produced by coconut water industry and in natura consumption. Therefore, there is a need for utilization of this by-product. This study aims to study the adsorption isotherms of green coconut pulp and determine its isosteric heat of sorption. The adsorption isotherms at temperatures of 30, 40, 50, 60, and 70 °C were analyzed, and they exhibit type III behavior, typical of sugar rich foods. The experimental results of equilibrium moisture content were correlated by models present in the literature. The Guggenheim, Anderson and De Boer (GAB) model proved particularly good overall agreement with the experimental data. The heat of sorption determined from the adsorption isotherms increased with the decrease in moisture content. The heat of sorption is considered as indicative of intermolecular attractive forces between the sorption sites and water vapor, which is an important factor to predict the shelf life of dried products.

Integrating vitrinite reflectance, rock-eval pyrolysis, flourescence microscopy and palynology of the Athabasca oil sands, Kearl Lake area, northeastern Alberta

Three cores from the Kearl Lake Oil Sands area within the Athabasca deposit of northeastern Alberta have been analyzed to understand the thermal history of the McMurray and Clearwater formations of the Lower Cretaceous Mannville Group. The approach involves the integration of vitrinite reflectance (VR), Rock-Eval pyrolysis, fluorescence microscopy, and palynology. Mean VR varies between 0.21 and 0.43% Ro and indicates thermally immature levels equivalent to the rank of lignite to sub-bituminous coal. Although differing lithologies have influenced VR to some extent (i.e., coals and bitumen-rich zones), groundwater influence and oxidation seem not to have measurably altered YR. Rock-Eval analysis points to Type III/IV kerogen, and samples rich in amorphous organic matter (ADM) show little to no fluorescence characteristics, implying a terrestrial source of origin. Palynology reveals the presence of some delicate macerals but lack of fluorescence and abundant ADM suggests some degradation and partial oxidation of the samples.

Étude clinique et génétique d’une nouvelle forme d’ataxie spinocérébelleuse pure associée à l’Érythrokératodermie

Nous présentons ici la description clinique et génétique d’un syndrome neurocutané unique. Le laboratoire du Dr Cossette a entrepris la caractérisation clinique et génétique d'une famille canadienne-française qui a été identifiée par les Drs Giroux et Barbeau en 1972 et qui comprend plus de 100 personnes sur six générations. Les membres atteints de cette famille présentent des lésions typiques d'érythrokératodermie (EK) (OMIM 133190, EKV1 et EKV2), associées à une ataxie spinocérébelleuse pure. Dans cette famille, l'ataxie est caractérisée par des troubles de la coordination et de la démarche causés par une dégénérescence du cervelet et de la moelle épinière. Cette ataxie est transmise selon un mode autosomique dominant. Une étude antérieure de cette variante d'EK avec ataxie avait suggéré une liaison sur le chromosome 1p34-p35, soit la même région que les formes EKV de type 1 et 2, causées respectivement par des mutations dans les gènes connexin-31 (GJB3; OMIM 603324) et connexin-30.3 (GJB4; OMIM 605425). Cependant, aucune mutation n'a été retrouvée dans ces gènes pour la famille canadienne-française. Nous avons récemment recontacté la famille et effectué des examens détaillés, incluant une imagerie par résonance magnétique (IRM) et un électromyogramme (EMG). Les manifestations neurologiques des individus atteints sont compatibles avec une nouvelle forme d’ataxie cérébelleuse pure à transmission autosomique dominante (ADCA de type III dans la classification de Harding) que nous avons appelée SCA34. Une cartographie complète du génome nous a permis de localiser le gène SCA34 sur le chromosome 6p12.3-q16.2. Également, en collaboration avec les Drs Alexis Brice (Hôpital Pitié-La Salpêtrière, Paris) et Alfredo Brusco (Hôpital San Giovanni Battista di Torino, Italie), nous avons confirmé que trois autres familles européennes avec SCA inexpliquée étaient également liées au locus SCA34. Notre laboratoire a récemment entrepris la recherche des mutations responsables de SCA34. Les résultats de ce criblage de gènes candidats sont présentés dans le chapitre 3 de cette thèse.

Impacts potentiels d’un changement climatique sur le pergélisol dans le nord canadien

Les fichiers video (d'animation) sont dans un format Windows Media (.wmv)

Les autotransporteurs auto-associatifs d’Escherichia coli : de facteurs de virulence à déterminants sociaux

Les autotransporteurs monomériques représentent le système de sécrétion le plus simple et le plus utilisé chez les bactéries à Gram négatif. Les autotransporteurs monomériques sont des protéines modulaires qui contiennent toute l’information pour leur sécrétion dans leur séquence. Les phénotypes associés à l’expression d’un autotransporteur peuvent être très variés et, souvent, les autotransporteurs sont des protéines multifonctionnelles. C’est le cas notamment des autotransporteurs AIDA-I, TibA et Ag43 d’Escherichia coli qui promouvoient l’adhésion et l’invasion de cellules épithéliales, l’auto-agrégation des bactéries et la formation de biofilm. Ces trois autotransporteurs ont d’ailleurs été regroupés dans une même famille, appelée les autotransporteurs auto-associatifs (SAATs). À cause de leur fonctionnalité, les SAATs sont considérés comme étant d’importants facteurs de virulence d’Escherichia coli. Toutefois, il existe plusieurs différences entre les SAATs qui ne sont pas bien comprises, si bien que leur rôle pour les bactéries n’est toujours pas bien compris. Nous avons donc d’abord caractérisé TibA, le membre des SAATs le moins bien étudié à l’aide d’une étude structure-fonction. Nous avons observé que TibA était une protéine modulaire et que son domaine fonctionnel était composé de deux modules : un module d’auto-agrégation en N-terminal et un module d’adhésion en C-terminal. En comparant nos résultats avec ceux obtenus pour les autres SAATs, nous avons réalisé que l’organisation des trois SAATs était très variée, c’est-à-dire que les trois SAATs sont composés de modules différents. Nous avons par ailleurs observé cet arrangement en modules lorsque nous avons analysé plusieurs séquences d’aidA, suggérant qu’un mécanisme d’échange et d’acquisition de modules était à la base de l’évolution des SAATs. Sans surprise, nous avons aussi observé que la famille des SAATs ne se limitait pas à AIDA-I, TibA et Ag43 et ne se limitait pas à Escherichia coli. La comparaison a aussi révélé l’importance du phénotype d’auto-agrégation dans la fonctionnalité des SAATs. Nous avons donc entrepris une étude du mécanisme d’auto-agrégation. Nos résultats on montré que l’auto-agrégation était le résultat d’une interaction directe SAAT/SAAT et ont mis en évidence un mécanisme similaire à celui utilisé par les cadhérines eucaryotes. De plus, nous avons observé que, comme les cadhérines, les SAATs étaient impliqués dans des interactions homophiliques; un SAAT interagit donc spécifiquement avec lui-même et non avec un différent SAAT. Finalement, les SAATs font parties des quelques protéines qui sont glycosylées chez Escherichia coli. Nous avons déterminé que le rôle de la glycosylation de TibA était de stabiliser la protéine et de lui donner la flexibilité nécessaire pour moduler sa conformation et, ainsi, être pleinement fonctionnelle. Globalement, nos résultats suggèrent que les SAATs sont des molécules « cadhérines-like » qui permettent la reconnaissance de soi chez les bactéries. Une telle habilité à discriminer entre le soi et le non-soi pourrait donc être utilisée par les bactéries pour organiser les communautés bactériennes.

Characterization and virulence potential of phenotypically diverse Aeromonas veronii isolates recovered from moribund freshwater ornamental fishes of Kerala, India

In the present study, we investigated the involvement of Aeromonas spp. in eliciting disease outbreaks in freshwater ornamental fishes across the state of Kerala, India. We investigated three incidences of disease, in which the moribund fishes exhibited clinical signs such as haemorrhagic septicemia (in gouramy, Trichogaster sp.), dropsy (in Oscar, Astronotus ocellatus) and tail rot/fin rot (in gold fish, Carassius carassius). Pure cultures (n = 20 from each fish; 60 in total) of Aeromonas spp. were recovered from the abdominal fluid as well as from internal organs of affected fishes, although they could not be identified to species level because of the variations in their phenotypic characters. The molecular fingerprinting of the isolates using Enterobacterial Repetitive Intergenic Consensus PCR proved the genetic diversity of the isolates from the three sites. The phylogenetic trees constructed using concatenated sequences (using 16S rRNA, gyrA, gyrB and rpoD genes) indicated that they were related to Aeromonas veronii. They exhibited marked cytotoxic and haemolytic activity, which were responsible for the pathogenic potential of the isolates. The isolates possessed multiple virulence genes such as enterotoxins (act and alt), haemolytic toxins (aerA and hlyA), genes involved in type III secretion system (ascV, aexT and ascF–ascG), glycerophospholipid-cholesterol acyltransferase (gcat) and a type IV pilus (tapA) gene, as determined by PCR. Virulence of representative isolates to goldfish was also tested, and we found LD50 values of 104.07–105.35 cfu/fish. Furthermore, the organisms could be recovered as pure cultures from the lesions as well as from the internal organs.

Factores asociados a infección de fracturas abiertas de extremidades por accidentes de tránsito. Bogotá, 2012-2013

Los traumatismos por accidentes de tránsito, constituyen un problema de salud pública, a nivel mundial. Las lesiones más frecuentes son las fracturas de extremidades (84.3%). Las fracturas tienen un elevado riesgo de presentar infecciones, secuelas e incapacidades permanentes. Objetivo : Determinar si los factores asociados con la patología (lugar de fractura, clasificación de fractura, comorbilidades del paciente) y/o los factores relacionados con la atención médica (uso de profilaxis antibiótica diferente al protocolo institucional, tiempo prolongado para remisión, demoras en manejo quirúrgico) se asocian a mayor probabilidad de presentar infección de fracturas abiertas, en población mayor a 15 años, atendidos por accidente de tránsito, en una clínica de Bogotá de tercer nivel especializada en atención de SOAT, durante el período Octubre de 2012 a Octubre de 2013. Metodología: Estudio de casos y controles no apareado, relación 1:3, conformado por 43 casos (fracturas abiertas infectadas) y 129 controles (fracturas abiertas no infectadas). Resultados: La edad media de los casos fue de 39.42 +/- 16.82 años (med=36 años) y la edad media de los controles fue de 33.15 +/- 11.78 años (med=30 años). El 83.7% de los casos y el 78.3% de los controles corresponden al sexo masculino. Predominaron los accidentes en motocicleta en el 81.4% de los casos y el 86% de los controles. En el análisis bivariado se encuentra que la edad mayor a 50 años (p=0.042), una clasificación de la fractura grado IIIB o IIIC (p=0.02), cumplimiento del protocolo antibiótico institucional según el grado de fractura (p=0.014) y un tiempo mayor a 24 horas desde el momento del accidente al centro especializado en trauma (p=0.035) se asociaron significativamente con infección de la fractura abierta. En el análisis multivariado se encuentra únicamente que la clasificación de la fractura grado IIIB o IIIC se asocia con infección de la fractura OR 2.6 IC95% (1.187 – 5.781) (p=0.017). La duración de hospitalización fue mayor en los casos (32.37+/- 22.92 días, med=26 días) que en los controles (8.81 +/- 7.52 días, med=6 días) (p<0.001). El promedio de lavados quirúrgicos fue mayor en los casos (4.85±4.1, med=4.0) que en el grupo control (1.94±1.26, med=2) (p<0.001). Conclusiones: La infección posterior a una fractura abierta, implica costos elevados de atención con hospitalizaciones prolongadas y mayor frecuencia de intervenciones quirúrgicas como se evidencia en el presente estudio. Se debe fortalecer el sistema de remisión y contra remisión para acortar los tiempos de inicio de manejo especializado de los pacientes con fracturas abiertas. Se debe incentivar dentro de las instituciones, el cumplimiento de protocolos de profilaxis antibiótica según el grado de la fractura para disminuir el riesgo de complicación infecciosa.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

PtdIns(5)P activates the host cell PI3-kinase/Akt pathway during Shigella flexneri infection

The virulence factor IpgD, delivered into nonphagocytic cells by the type III secretion system of the pathogen Shigella flexneri, is a phosphoinositide 4-phosphatase generating phosphatidylinositol 5 monophosphate (PtdIns(5) P). We show that PtdIns(5) P is rapidly produced and concentrated at the entry foci of the bacteria, where it colocalises with phosphorylated Akt during the first steps of infection. Moreover, S. flexneri-induced phosphorylation of host cell Akt and its targets specifically requires IpgD. Ectopic expression of IpgD in various cell types, but not of its inactive mutant, or addition of short-chain penetrating PtdIns(5) P is sufficient to induce Akt phosphorylation. Conversely, sequestration of PtdIns(5) P or reduction of its level strongly decreases Akt phosphorylation in infected cells or in IpgD-expressing cells. Accordingly, IpgD and PtdIns(5) P production specifically activates a class IA PI 3-kinase via a mechanism involving tyrosine phosphorylations. Thus, S. flexneri parasitism is shedding light onto a new mechanism of PI 3-kinase/Akt activation via PtdIns(5) P production that plays an important role in host cell responses such as survival.