Ultrasound and microwave assisted extraction of ergosterol from Agaricus bisporus L.: optimization through response surface methodology

There is scientific evidence demonstrating the benefits of mushrooms ingestion due to their richness in bioactive compounds such as mycosterols, in particular ergosterol [I]. Agaricus bisporus L. is the most consumed mushroom worldwide presenting 90% of ergosterol in its sterol fraction [2]. Thus, it is an interesting matrix to obtain ergosterol, a molecule with a high commercial value. According to literature, ergosterol concentration can vary between 3 to 9 mg per g of dried mushroom. Nowadays, traditional methods such as maceration and Soxhlet extraction are being replaced by emerging methodologies such as ultrasound (UAE) and microwave assisted extraction (MAE) in order to decrease the used solvent amount, extraction time and, of course, increasing the extraction yield [2]. In the present work, A. bisporus was extracted varying several parameters relevant to UAE and MAE: UAE: solvent type (hexane and ethanol), ultrasound amplitude (50 - 100 %) and sonication time (5 min-15 min); MAE: solvent was fixed as ethanol, time (0-20 min), temperature (60-210 •c) and solid-liquid ratio (1-20 g!L). Moreover, in order to decrease the process complexity, the pertinence to apply a saponification step was evaluated. Response surface methodology was applied to generate mathematical models which allow maximizing and optimizing the response variables that influence the extraction of ergosterol. Concerning the UAE, ethanol proved to be the best solvent to achieve higher levels of ergosterol (671.5 ± 0.5 mg/100 g dw, at 75% amplitude for 15 min), once hexane was only able to extract 152.2 ± 0.2 mg/100 g dw, in the same conditions. Nevertheless, the hexane extract showed higher purity (11%) when compared with the ethanol counterpart ( 4% ). Furthermore, in the case of the ethanolic extract, the saponification step increased its purity to 21%, while for the hexane extract the purity was similar; in fact, hexane presents higher selectivity for the lipophilic compounds comparatively with ethanol. Regarding the MAE technique, the results showed that the optimal conditions (19 ± 3 min, 133 ± 12 •c and 1.6 ± 0.5 g!L) allowed higher ergosterol extraction levels (556 ± 26 mg/100 g dw). The values obtained with MAE are close to the ones obtained with conventional Soxhlet extraction (676 ± 3 mg/100 g dw) and UAE. Overall, UAE and MAE proved to he efficient technologies to maximize ergosterol extraction yields.

Optimization of microwave-assisted extration of phenolic compounds from tomao by full factorial design coupled with response surface methodology

Tomato (Lycopersicon esculentum Mill.), apart from being a functional food rich in carotenoids, vitamins and minerals, is also an important source of phenolic compounds [1 ,2]. As antioxidants, these functional molecules play an important role in the prevention of human pathologies and have many applications in nutraceutical, pharmaceutical and cosmeceutical industries. Therefore, the recovery of added-value phenolic compounds from natural sources, such as tomato surplus or industrial by-products, is highly desirable. Herein, the microwave-assisted extraction of the main phenolic acids and flavonoids from tomato was optimized. A S-Ieve! full factorial Box-Behnken design was implemented and response surface methodology used for analysis. The extraction time (0-20 min), temperature (60-180 "C), ethanol percentage (0-100%), solidlliquid ratio (5-45 g/L) and microwave power (0-400 W) were studied as independent variables. The phenolic profile of the studied tomato variety was initially characterized by HPLC-DAD-ESIIMS [2]. Then, the effect of the different extraction conditions, as defined by the used experimental design, on the target compounds was monitored by HPLC-DAD, using their UV spectra and retention time for identification and a series of calibrations based on external standards for quantification. The proposed model was successfully implemented and statistically validated. The microwave power had no effect on the extraction process. Comparing with the optimal extraction conditions for flavonoids, which demanded a short processing time (2 min), a low temperature (60 "C) and solidlliquid ratio (5 g/L), and pure ethanol, phenolic acids required a longer processing time ( 4.38 min), a higher temperature (145.6 •c) and solidlliquid ratio (45 g/L), and water as extraction solvent. Additionally, the studied tomato variety was highlighted as a source of added-value phenolic acids and flavonoids.

Flowers of Gomphrena globosa L. as an alternatve source of betacyanins: optimization of the extraction using response surface methodology

Betacyanins are betalain pigments that display a red-violet colour which have been reported to be three times stronger than the red-violet dye produced by anthocyanins [1]. The applications of betacyanins cover a wide range of matrices, mainly as additives or ingredients in the food industry, cosmetics, pharmaceuticals and livestock feed. Although, being less commonly used than anthocyanins and carotenoids, betacyanins are stable between pH 3 to 7 and suitable for colouring in low acid matrices. In addition, betacyanins have been reported to display interesting medicinal character as powerful antioxidant and chemopreventive compounds either in vitro or in vivo models [2]. Betacyanins are obtained mainly from the red beet of Beta vulgaris plant (between I 0 to 20 mg per I 00 g pulp) but alternative primary sources are needed [3]. In addition, independently of the source used, the effect of the variables that affect the extraction of betacyanins have not been properly described and quantified. Therefore, the aim of this study was to identifY and optimize the conditions that maximize betacyanins extraction using the tepals of Gomphrena globosa L. flowers as an alternative source. Assisted by the statistical technique of response surface methodology, an experimental design was developed for testing the significant explanatory variables of the extraction (time, temperature, solid-liquid ratio and ethanolwater ratio). The identification was performed using high-performance liquid chromatography coupled with a photodiode array detector and mass spectrometry with electron spray ionization (HPLC-PDAMS/ ESI) and the response was measured by the quantification of these compounds using HPLC-PDA. Afterwards, a response surface analysis was performed to evaluate the results. The major betacyanin compounds identified were gomphrenin 11 and Ill and isogomphrenin IJ and Ill. The highest total betacyanins content was obtained by using the following conditions: 45 min of extraction. time, 35•c, 35 g/L of solid-liquid ratio and 25% of ethanol. These values would not be found without optimizing the conditions of the betacyanins extraction, which moreover showed contrary trends to what it has been described in the scientific bibliography. More specifically, concerning the time and temperature variables, an increase of both values (from the common ones used in the bibliography) showed a considerable improvement on the betacyanins extraction yield without displaying any type of degradation patterns.

Effect of environmental variables on buffaloes physiology

The objective of this work was to evaluate the effect of environmental variables on dairy buffaloes physiology in two different places after milking, shaded plus artificial ventilation and another one non-shaded, in Ribeira Valley, São Paulo State, Brazil. Data on the respiratory rate (RR) and the surface temperature (ST) at udder, neckmiddle, forehead, back middle and rump were collected in 12 dairy buffaloes at autumn. In the same way, it were recorded the black globe temperature in the sun (GTS) and in the shade (GTNS), air temperature and wind speed at padronized height of 1.60 meters. All data were collected at 10:30am and 1:30pm. The results showed statistical difference among black globe temperature, wind speed, RR and ST (P<0.01) in two treatments.The results showed the necessity of protection against the solar radiation in the buffaloes, even in periods of warm climates.

Optimization of microwave-assisted extraction of hydrophilic and lipophilic antioxidants from a surplus tomato crop by response surface methodology

Tomato is the second most important vegetable crop worldwide and a rich source of industrially interesting antioxidants. Hence, the microwave-assisted extraction of hydrophilic (H) and lipophilic (L) antioxidants from a surplus tomato crop was optimized using response surface methodology. The relevant independent variables were temperature (T), extraction time (t), ethanol concentration (Et) and solid/liquid ratio (S/L). The concentration-time response methods of crocin and β-carotene bleaching were applied, since they are suitable in vitro assays to evaluate the antioxidant activity of H and L matrices, respectively. The optimum operating conditions that maximized the extraction were as follows: t, 2.25 min; T, 149.2 ºC; Et, 99.1 %; and S/L, 45.0 g/L for H antioxidants; and t, 15.4 min; T, 60.0 ºC; Et, 33.0 %; and S/L, 15.0 g/L for L antioxidants. This industrial approach indicated that surplus tomatoes possess a high content of antioxidants, offering an alternative source for obtaining natural value-added compounds. Additionally, by testing the relationship between the polarity of the extraction solvent and the antioxidant activity of the extracts in H and L media (polarity-activity relationship), useful information for the study of complex natural extracts containing components with variable degrees of polarity was obtained.

On the critical point structure of eigenfunctions belonging to the first nonzero eigenvalue of a genus two closed hyperbolic surface

We develop a method based on spectral graph theory to approximate the eigenvalues and eigenfunctions of the Laplace-Beltrami operator of a compact riemannian manifold -- The method is applied to a closed hyperbolic surface of genus two -- The results obtained agree with the ones obtained by other authors by different methods, and they serve as experimental evidence supporting the conjectured fact that the generic eigenfunctions belonging to the first nonzero eigenvalue of a closed hyperbolic surface of arbitrary genus are Morse functions having the least possible total number of critical points among all Morse functions admitted by such manifolds

Pattern recognition methods for EMG prosthetic control

In this work we focus on pattern recognition methods related to EMG upper-limb prosthetic control. After giving a detailed review of the most widely used classification methods, we propose a new classification approach. It comes as a result of comparison in the Fourier analysis between able-bodied and trans-radial amputee subjects. We thus suggest a different classification method which considers each surface electrodes contribute separately, together with five time domain features, obtaining an average classification accuracy equals to 75% on a sample of trans-radial amputees. We propose an automatic feature selection procedure as a minimization problem in order to improve the method and its robustness.

Modifications in Early Rehabilitation Protocol after Rotator Cuff Repair : EMG Studies

La déchirure de la coiffe des rotateurs est une des causes les plus fréquentes de douleur et de dysfonctionnement de l'épaule. La réparation chirurgicale est couramment réalisée chez les patients symptomatiques et de nombreux efforts ont été faits pour améliorer les techniques chirurgicales. Cependant, le taux de re-déchirure est encore élevé ce qui affecte les stratégies de réhabilitation post-opératoire. Les recommandations post-chirurgicales doivent trouver un équilibre optimal entre le repos total afin de protéger le tendon réparé et les activités préconisées afin de restaurer l'amplitude articulaire et la force musculaire. Après une réparation de la coiffe, l'épaule est le plus souvent immobilisée grâce à une écharpe ou une orthèse. Cependant, cette immobilisation limite aussi la mobilité du coude et du poignet. Cette période qui peut durer de 4 à 6 semaines où seuls des mouvements passifs peuvent être réalisés. Ensuite, les patients sont incités à réaliser les exercices actifs assistés et des exercices actifs dans toute la mobilité articulaire pour récupérer respectivement l’amplitude complète de mouvement actif et se préparer aux exercices de résistance réalisés dans la phase suivante de la réadaptation. L’analyse électromyographique des muscles de l'épaule a fourni des évidences scientifiques pour la recommandation de beaucoup d'exercices de réadaptation au cours de cette période. Les activités sollicitant les muscles de la coiffe des rotateurs à moins de 20% de leur activation maximale volontaire sont considérés sécuritaires pour les premières phases de la réhabilitation. À partir de ce concept, l'objectif de cette thèse a été d'évaluer des activités musculaires de l'épaule pendant des mouvements et exercices qui peuvent théoriquement être effectués au cours des premières phases de la réhabilitation. Les trois questions principales de cette thèse sont : 1) Est-ce que la mobilisation du coude et du poignet produisent une grande activité des muscles de la coiffe? 2) Est-ce que les exercices de renforcement musculaire du bras, de l’avant-bras et du torse produisent une grande activité dans les muscles de la coiffe? 3) Au cours d'élévations actives du bras, est-ce que le plan d'élévation affecte l'activité de la coiffe des rotateurs? Dans notre première étude, nous avons évalué 15 muscles de l'épaule chez 14 sujets sains par électromyographie de surface et intramusculaire. Nos résultats ont montré qu’avec une orthèse d’épaule, les mouvements du coude et du poignet et même quelques exercices de renforcement impliquant ces deux articulations, activent de manière sécuritaire les muscles de ii la coiffe. Nous avons également introduit des tâches de la vie quotidienne qui peuvent être effectuées en toute sécurité pendant la période d'immobilisation. Ces résultats peuvent aider à modifier la conception d'orthèses de l’épaule. Dans notre deuxième étude, nous avons montré que l'adduction du bras réalisée contre une mousse à faible densité, positionnée pour remplacer le triangle d’une orthèse, produit des activations des muscles de la coiffe sécuritaires. Dans notre troisième étude, nous avons évalué l'électromyographie des muscles de l’épaule pendant les tâches d'élévation du bras chez 8 patients symptomatiques avec la déchirure de coiffe des rotateurs. Nous avons constaté que l'activité du supra-épineux était significativement plus élevée pendant l’abduction que pendant la scaption et la flexion. Ce résultat suggère une séquence de plan d’élévation active pendant la rééducation. Les résultats présentés dans cette thèse, suggèrent quelques modifications dans les protocoles de réadaptation de l’épaule pendant les 12 premières semaines après la réparation de la coiffe. Ces suggestions fournissent également des évidences scientifiques pour la production d'orthèses plus dynamiques et fonctionnelles à l’articulation de l’épaule.

Modifications in Early Rehabilitation Protocol after Rotator Cuff Repair : EMG Studies

La déchirure de la coiffe des rotateurs est une des causes les plus fréquentes de douleur et de dysfonctionnement de l'épaule. La réparation chirurgicale est couramment réalisée chez les patients symptomatiques et de nombreux efforts ont été faits pour améliorer les techniques chirurgicales. Cependant, le taux de re-déchirure est encore élevé ce qui affecte les stratégies de réhabilitation post-opératoire. Les recommandations post-chirurgicales doivent trouver un équilibre optimal entre le repos total afin de protéger le tendon réparé et les activités préconisées afin de restaurer l'amplitude articulaire et la force musculaire. Après une réparation de la coiffe, l'épaule est le plus souvent immobilisée grâce à une écharpe ou une orthèse. Cependant, cette immobilisation limite aussi la mobilité du coude et du poignet. Cette période qui peut durer de 4 à 6 semaines où seuls des mouvements passifs peuvent être réalisés. Ensuite, les patients sont incités à réaliser les exercices actifs assistés et des exercices actifs dans toute la mobilité articulaire pour récupérer respectivement l’amplitude complète de mouvement actif et se préparer aux exercices de résistance réalisés dans la phase suivante de la réadaptation. L’analyse électromyographique des muscles de l'épaule a fourni des évidences scientifiques pour la recommandation de beaucoup d'exercices de réadaptation au cours de cette période. Les activités sollicitant les muscles de la coiffe des rotateurs à moins de 20% de leur activation maximale volontaire sont considérés sécuritaires pour les premières phases de la réhabilitation. À partir de ce concept, l'objectif de cette thèse a été d'évaluer des activités musculaires de l'épaule pendant des mouvements et exercices qui peuvent théoriquement être effectués au cours des premières phases de la réhabilitation. Les trois questions principales de cette thèse sont : 1) Est-ce que la mobilisation du coude et du poignet produisent une grande activité des muscles de la coiffe? 2) Est-ce que les exercices de renforcement musculaire du bras, de l’avant-bras et du torse produisent une grande activité dans les muscles de la coiffe? 3) Au cours d'élévations actives du bras, est-ce que le plan d'élévation affecte l'activité de la coiffe des rotateurs? Dans notre première étude, nous avons évalué 15 muscles de l'épaule chez 14 sujets sains par électromyographie de surface et intramusculaire. Nos résultats ont montré qu’avec une orthèse d’épaule, les mouvements du coude et du poignet et même quelques exercices de renforcement impliquant ces deux articulations, activent de manière sécuritaire les muscles de ii la coiffe. Nous avons également introduit des tâches de la vie quotidienne qui peuvent être effectuées en toute sécurité pendant la période d'immobilisation. Ces résultats peuvent aider à modifier la conception d'orthèses de l’épaule. Dans notre deuxième étude, nous avons montré que l'adduction du bras réalisée contre une mousse à faible densité, positionnée pour remplacer le triangle d’une orthèse, produit des activations des muscles de la coiffe sécuritaires. Dans notre troisième étude, nous avons évalué l'électromyographie des muscles de l’épaule pendant les tâches d'élévation du bras chez 8 patients symptomatiques avec la déchirure de coiffe des rotateurs. Nous avons constaté que l'activité du supra-épineux était significativement plus élevée pendant l’abduction que pendant la scaption et la flexion. Ce résultat suggère une séquence de plan d’élévation active pendant la rééducation. Les résultats présentés dans cette thèse, suggèrent quelques modifications dans les protocoles de réadaptation de l’épaule pendant les 12 premières semaines après la réparation de la coiffe. Ces suggestions fournissent également des évidences scientifiques pour la production d'orthèses plus dynamiques et fonctionnelles à l’articulation de l’épaule.

Trends in NE Atlantic landings (southern Portugal): identifying the relative importance of fisheries and environmental variables

Time series of commercial landings from the Algarve (southern Portugal) from 1982 to 1999 were analyzed using min/max autocorrelation factor analysis (MAFA) and dynamic factor analysis (DFA). These techniques were used to identify trends and explore the relationships between the response variables (annual landings of 12 species) and explanatory variables [sea surface temperature, rainfall, an upwelling index, Guadiana river (south-east Portugal) flow, the North Atlantic oscillation, the number of licensed fishing vessels and the number of commercial fishermen]. Landings were more highly correlated with non-lagged environmental variables and in particular with Guadiana river flow. Both techniques gave coherent results, with the most important trend being a steady decline over time. A DFA model with two explanatory variables (Guadiana river flow and number of fishermen) and three common trends (smoothing functions over time) gave good fits to 10 of the 12 species. Results of other models indicated that river flow is the more important explanatory variable in this model. Changes in the mean flow and discharge regime of the Guadiana river resulting from the construction of the Alqueva dam, completed in 2002, are therefore likely to have a significant and deleterious impact on Algarve fisheries landings.

Assessing the role of Mediterranean evergreen oaks canopy cover in land surface albedo and temperature using a remote sensing-based approach

Modifications in vegetation cover can have an impact on the climate through changes in biogeochemical and biogeophysical processes. In this paper, the tree canopy cover percentage of a savannah-like ecosystem (montado/dehesa) was estimated at Landsat pixel level for 2011, and the role of different canopy cover percentages on land surface albedo (LSA) and land surface temperature (LST) were analysed. A modelling procedure using a SGB machine-learning algorithm and Landsat 5-TM spectral bands and derived vegetation indices as explanatory variables, showed that the estimation of montado canopy cover was obtained with good agreement (R2 = 78.4%). Overall, montado canopy cover estimations showed that low canopy cover class (MT_1) is the most representative with 50.63% of total montado area. MODIS LSA and LST products were used to investigate the magnitude of differences in mean annual LSA and LST values between contrasting montado canopy cover percentages. As a result, it was found a significant statistical relationship between montado canopy cover percentage and mean annual surface albedo (R2 = 0.866, p < 0.001) and surface temperature (R2 = 0.942, p < 0.001). The comparisons between the four contrasting montado canopy cover classes showed marked differences in LSA (χ2 = 192.17, df = 3, p < 0.001) and LST (χ2 = 318.18, df = 3, p < 0.001). The highest montado canopy cover percentage (MT_4) generally had lower albedo than lowest canopy cover class, presenting a difference of −11.2% in mean annual albedo values. It was also showed that MT_4 and MT_3 are the cooler canopy cover classes, and MT_2 and MT_1 the warmer, where MT_1 class had a difference of 3.42 °C compared with MT_4 class. Overall, this research highlighted the role that potential changes in montado canopy cover may play in local land surface albedo and temperature variations, as an increase in these two biogeophysical parameters may potentially bring about, in the long term, local/regional climatic changes moving towards greater aridity.

Polyphenol Extraction Optimisation From Ceylon Gooseberry (dovyalis Hebecarpa) Pulp.

Originally from Asia, Dovyalis hebecarpa is a dark purple/red exotic berry now also produced in Brazil. However, no reports were found in the literature about phenolic extraction or characterisation of this berry. In this study we evaluate the extraction optimisation of anthocyanins and total phenolics in D. hebecarpa berries aiming at the development of a simple and mild analytical technique. Multivariate analysis was used to optimise the extraction variables (ethanol:water:acetone solvent proportions, times, and acid concentrations) at different levels. Acetone/water (20/80 v/v) gave the highest anthocyanin extraction yield, but pure water and different proportions of acetone/water or acetone/ethanol/water (with >50% of water) were also effective. Neither acid concentration nor time had a significant effect on extraction efficiency allowing to fix the recommended parameters at the lowest values tested (0.35% formic acid v/v, and 17.6 min). Under optimised conditions, extraction efficiencies were increased by 31.5% and 11% for anthocyanin and total phenolics, respectively as compared to traditional methods that use more solvent and time. Thus, the optimised methodology increased yields being less hazardous and time consuming than traditional methods. Finally, freeze-dried D. hebecarpa showed high content of target phytochemicals (319 mg/100g and 1,421 mg/100g of total anthocyanin and total phenolic content, respectively).

[impact Variables On The Decline In Infant Mortality In The State Of São Paulo, Brazil: 1998-2008].

This is an ecological, analytical and retrospective study comprising the 645 municipalities in the State of São Paulo, the scope of which was to determine the relationship between socioeconomic, demographic variables and the model of care in relation to infant mortality rates in the period from 1998 to 2008. The ratio of average annual change for each indicator per stratum coverage was calculated. Infant mortality was analyzed according to the model for repeated measures over time, adjusted for the following correction variables: the city's population, proportion of Family Health Programs (PSFs) deployed, proportion of Growth Acceleration Programs (PACs) deployed, per capita GDP and SPSRI (São Paulo social responsibility index). The analysis was performed by generalized linear models, considering the gamma distribution. Multiple comparisons were performed with the likelihood ratio with chi-square approximate distribution, considering a significance level of 5%. There was a decrease in infant mortality over the years (p < 0.05), with no significant difference from 2004 to 2008 (p > 0.05). The proportion of PSFs deployed (p < 0.0001) and per capita GDP (p < 0.0001) were significant in the model. The decline of infant mortality in this period was influenced by the growth of per capita GDP and PSFs.

Evaluation Of The Effect Of Different Methods Of Microabrasion And Polishing On Surface Roughness Of Dental Enamel.

The microabrasion technique of enamel consists of selectively abrading the discolored areas or causing superficial structural changes in a selective way. In microabrasion technique, abrasive products associated with acids are used, and the evaluation of enamel roughness after this treatment, as well as surface polishing, is necessary. This in-vitro study evaluated the enamel roughness after microabrasion, followed by different polishing techniques. Roughness analyses were performed before microabrasion (L1), after microabrasion (L2), and after polishing (L3).Thus, 60 bovine incisive teeth divided into two groups were selected (n=30): G1- 37% phosphoric acid (37%) (Dentsply) and pumice; G2- hydrochloric acid (6.6%) associated with silicon carbide (Opalustre - Ultradent). Thereafter, the groups were divided into three sub-groups (n=10), according to the system of polishing: A - Fine and superfine granulation aluminum oxide discs (SofLex 3M); B - Diamond Paste (FGM) associated with felt discs (FGM); C - Silicone tips (Enhance - Dentsply). A PROC MIXED procedure was applied after data exploratory analysis, as well as the Tukey-Kramer test (5%). No statistical differences were found between G1 and G2 groups. L2 differed statistically from L1 and showed superior amounts of roughness. Differences in the amounts of post-polishing roughness for specific groups (1A, 2B, and 1C) arose, which demonstrated less roughness in L3 and differed statistically from L2 in the polishing system. All products increased enamel roughness, and the effectiveness of the polishing systems was dependent upon the abrasive used.

Tuning The Surface Anisotropy In Fe-doped Nio Nanoparticles.

Ni(1-x)FexO nanoparticles have been obtained by the co-precipitation chemical route. X-ray diffraction analyses using Rietveld refinement have shown a slight decrease in the microstrain and mean particle size as a function of the Fe content. The zero-field-cooling (ZFC) and field-cooling (FC) magnetization curves show superparamagnetic behavior at high temperatures and a low temperature peak (at T = 11 K), which is enhanced with increasing Fe concentration. Unusual behavior of the coercive field in the low temperature region and an exchange bias behavior were also observed. A decrease in the Fe concentration induces an increase in the exchange bias field. We argue that these behaviors can be linked with the strengthening of surface anisotropy caused by the incorporation of Fe ions.