Defect-selective photothermal imaging: a sensitive tool for damage mapping in optical coatings

A defect-selective photothermal imaging system for the diagnostics of optical coatings is demonstrated. The instrument has been optimized for pump and probe parameters, detector performance, and signal processing algorithm. The imager is capable of mapping purely optical or thermal defects efficiently in coatings of low damage threshold and low absorbance. Detailed mapping of minor inhomogeneities at low pump power has been achieved through the simultaneous action of a low-noise fiber optic photothermal beam defection sensor and a common-mode-rejection demodulation (CMRD) technique. The linearity and sensitivity of the sensor have been examined theoretically and experimentally, and the signal to noise ratio improvement factor is found to be about 110 compared to a conventional bicell photodiode. The scanner is so designed that mapping of static or shock sensitive samples is possible. In the case of a sample with absolute absorptance of 3.8 x 10(-4), a change in absorptance of about 0.005 x 10(-4) has been detected without ambiguity, ensuring a contrast parameter of 760. This is about 1085% improvement over the conventional approach containing a bicell photodiode, at the same pump power. The merits of the system have been demonstrated by mapping two intentionally created damage sites in a MgF2 coating on fused silica at different excitation powers. Amplitude and phase maps were recorded for thermally thin and thick cases, and the results are compared to demonstrate a case which, in conventional imaging, would lead to a deceptive conclusion regarding the type and location of the damage. Also, a residual damage profile created by long term irradiation with high pump power density has been depicted.

Crystallization as a Tool for Controlling and Designing Properties of Pharmaceutical Solids

The ability to deliver the drug to the patient in a safe, efficacious and cost-effective manner depends largely on the physicochemical properties of the active pharmaceutical ingredient (API) in the solid state. In this context, crystallization is of critical importance in pharmaceutical industry, as it defines physical and powder properties of crystalline APIs. An improved knowledge of the various aspects of crystallization process is therefore needed. The overall goal of this thesis was to gain better understanding of the relationships between crystallization, solid-state form and properties of pharmaceutical solids with a focus on a crystal engineering approach to design technological properties of APIs. Specifically, solid-state properties of the crystalline forms of the model APIs, erythromycin A and baclofen, and the influence of solvent on their crystallization behavior were investigated. In addition, the physical phenomena associated with wet granulation and hot-melting processing of the model APIs were examined at the molecular level. Finally, the effect of crystal habit modification of a model API on its tabletting properties was evaluated. The thesis enabled the understanding of the relationship between the crystalline forms of the model APIs, which is of practical importance for solid-state control during processing and storage. Moreover, a new crystalline form, baclofen monohydrate, was discovered and characterized. Upon polymorph screening, erythromycin A demonstrated high solvate-forming propensity thus emphasizing the need for careful control of the solvent effects during formulation. The solvent compositions that yield the desirable crystalline form of erythromycin A were defined. Furthermore, new examples on solvent-mediated phase transformations taking place during wet granulation of baclofen and hot-melt processing of erythromycin A dihydrate with PEG 6000 are reported. Since solvent-mediated phase transformations involve the crystallization of a stable phase and hence affect the dissolution kinetics and possibly absorption of the API these transformations must be well documented. Finally, a controlled-crystallization method utilizing HPMC as a crystal habit modifier was developed for erythromycin A dihydrate. The crystals with modified habit were shown to posses improved compaction properties as compared with those of unmodified crystals. This result supports the idea of morphological crystal engineering as a tool for designing technological properties of APIs and is of utmost practical interest.

Correlation of plasma IGF-I concentrations and growth rate in aquacultured finfish: a tool for assessing the potential of new diets

A recently developed radioimmunoassay (RIA) for measuring insulin-like growth factor (IGF-I) in a variety of fish species was used to investigate the correlation between growth rate and circulating IGF-I concentrations of barramundi (Lates calcarifer), Atlantic salmon (Salmo salar) and Southern Bluefin tuna (Thunnus maccoyii). Plasma IGF-I concentration significantly increased with increasing ration size in barramundi and IGF-I concentration was positively correlated to growth rates obtained in Atlantic salmon (r2=0.67) and barramundi (r2=0.65) when fed a variety of diet formulations. IGF-I was also positively correlated to protein concentration (r2=0.59). This evidence suggested that measuring IGF-I concentration may provide a useful tool for monitoring fish growth rate and also as a method to rapidly assess different aquaculture diets. However, no such correlation was demonstrated in the tuna study probably due to seasonal cooling of sea surface temperature shortly before blood was sampled. Thus, some recommendations for the design and sampling strategy of nutritional trials where IGF-I concentrations are measured are discussed

Pheromone-mediated mass trapping and population diversion as strategies for suppressing Carpophilus spp. (Coleoptera: Nitidulidae) in Australian stone fruit orchards

1 Five experiments were conducted during 1995-99 in stone fruit orchards on the Central Coast and in inland New South Wales, Australia, on the use of synthetic aggregation pheromones and a coattractant to suppress populations of the ripening fruit pests Carpophilus spp. (Coleoptera: Nitidulidae). 2 Perimeter-based suppression traps baited with pheromone and coattractant placed at 3m intervals around small fruit blocks, caught large numbers of Carpophilus spp. Very small populations of Carpophilus spp. occurred within blocks, and fruit damage was minimal. 3 Carpophilus spp. populations in stone fruit blocks 15-370m from suppression traps were also small and non-damaging, indicating a large zone of pheromone attractivity. 4 Pheromone/coattractant-baited suppression traps appeared to divert Carpophilus spp. from nearby (130 m) ripening stone fruit. Ten metal drums containing decomposing fruit, baited with pheromone and treated with insecticide, attracted Carpophilus spp. and appeared to reduce populations and damage to ripening fruit at distances of 200-500 m. Populations and damage were significantly greater within 200m of the drums and may have been caused by ineffective poisoning or poor quality/overcrowding of fruit resources in the drums. 5 Suppression of Carpophilus spp. populations using synthetic aggregation pheromones and a coattractant appears to be a realistic management option in stone fruit orchards. Pheromone-mediated diversion of beetle populations from ripening fruit may be more practical than perimeter trapping, but more research is needed on the effective range of Carpophilus pheromones and the relative merits of trapping compared to attraction to insecticide-treated areas.

Pheromone-trapping of Carpophilus spp. (Coleoptera: Nitidulidae) in stone fruit orchards near Gosford, New South Wales: Fauna, seasonality and effect of insecticides

Traps baited with synthetic aggregation pheromones of Carpophilus hemipterus (L.), Carpophilus mutilatus Erichson and Carpophilus davidsoni Dobson and fermenting bread dough were used to identify the fauna and monitor the seasonal abundance of Carpophilus spp. in insecticide treated peach and nectarine orchards in the Gosford area of coastal New South Wales. In four orchards 67 178 beetles were trapped during 1994–1995, with C. davidsoni (82%) and Carpophilus gaveni (Dobson) (12.2%) dominating catches. Five species (C. hemipterus, C. mutilatus, Carpophilus marginellus Motschulsky, Carpophilus humeralis (F.) and an unidentified species) each accounted for 0.2–3.2% of trapped beetles. Carpophilus davidsoni was most abundant during late September–early October but numbers declined rapidly during October, usually before insecticides were applied. Spring populations of Carpophilus spp. were very large in 1994–1995 (1843–2588 per trap per week). However, despite a preharvest population decline of approximately 95% and 2–11 applications of insecticide, 14–545 beetles per trap per week (above the arbitrary fruit damage threshold of 10 beetles per trap per week) were recorded during the harvest period and fruit damage occurred at three of the four orchards. Lower preharvest populations in 1995–1996 (< 600 per trap per week) and up to six applications of insecticide resulted in < 10 beetles per trap per week during most of the harvest period and minimal or no fruit damage. The implications of these results for the integrated management of Carpophilus spp. in coastal and inland areas of southeastern Australia are discussed.

Phenology of Carpophilus spp. (Coleoptera: Nitidulidae)in stone fruit orchards as determined by pheromone trapping: Implications for prediction of crop damage

Traps baited with synthetic aggregation pheromone and fermenting bread dough were used to monitor seasonal incidence and abundance of the ripening fruit pests, Carpophilus hemipterus (L.), C. mutilatus Erichson and C. davidsoni Dobson in stone fruit orchards in the Leeton district of southern New South Wales during five seasons (1991-96). Adult beetles were trapped from September-May, but abundance varied considerably between years with the amount of rainfall in December-January having a major influence on population size and damage potential during the canning peach harvest (late February-March). Below average rainfall in December-January was associated with mean trap catches of < 10 beetles/trap/week in low dose pheromone traps during the harvest period in 1991/92 and 1993/94 and no reported damage to ripening fruit. Rainfall in December-January 1992/93 was more than double the average and mean trap catches ranged from 8-27 beetles/week during the harvest period with substantial damage to the peach crop. December-January rainfall was also above average in 1994/95 and 1995/96 and means of 50-300 beetles/trap/week were recorded in high dose pheromone traps during harvest periods. Carpophilus spp. caused economic damage to peach crops in both seasons. These data indicate that it may be possible to predict the likelihood of Carpophilus beetle damage to ripening stone fruit in inland areas of southern Australia, by routine pheromone-based monitoring of beetle populations and summer temperatures and rainfall.

Archaeology of wings : Birds and people in the Baltic Sea region during the Stone Age

The prominent roles of birds, often mentioned in historical sources, are not well reflected in archaeological research. Absence or scarcity of bird bones in archaeological assemblages has been often seen as indication of a minor role of birds in the prehistoric economy or ideology, or explained by taphonomic loss. Few studies exist where birds form the basis for extensive archaeological interpretation. In this doctoral dissertation bird bone material from various Stone Age sites in the Baltic Sea region is investigated. The study period is approximately 7000-3400 BP, comprising mainly Neolithic cultures. The settlement material comes from Finland, Åland, Gotland, Saaremaa and Hiiumaa. Osteological materials are used for studying the economic and cultural importance of birds, fowling methods and principal fowling seasons. The bones were identified and earlier identifications partially checked with help of a reference material of modern skeletons. Fracture analysis was used in order to study the deposition history of bones at Ajvide settlement site. Birds in burials at two large cemeteries, Ajvide on Gotland and Zvejnieki in northern Latvia were investigated in order to study the roles of birds in burial practices. My study reveals that the economic importance of birds is at least seasonally often more prominent than usually thought, and varies greatly in different areas. Fowling has been most important in coastal areas, and especially during the breeding season. Waterbirds and grouse species were generally the most important groups in Finnish Stone Age economy. The identified species composition shows much resemblance to contemporary hunting with species such as the mallard and capercaillie commonly found. Burial materials and additional archaeological evidence from Gotland, Latvia and some other parts of northern Europe indicate that birds –e.g., jay, whooper swan, ducks – have been socially and ideologically important for the studied groups (indicating a place in the belief system, e.g. clan totemism). The burial finds indicate that some common ideas about waterbirds (perhaps as messengers or spirit helpers) might have existed in the northern European Stone Age.

Pasteurella multocida detection by 5' Taq nuclease assay: a new tool for use in diagnosing fowl cholera

A 5′ Taq nuclease assay utilising minor groove binder technology and targeting the 16S rRNA gene was designed to detect Pasteurella multocida (the causative agent of fowl cholera) in swabs collected from poultry. The assay was first evaluated using pure cultures. The assay correctly identified four P. multocida taxonomic type strains, 18 P. multocida serovar reference strains and 40 Australian field isolates (17 from poultry, 11 from pigs and 12 from cattle). Representatives of nine other Pasteurella species, 26 other bacterial species (18 being members of the family Pasteurellaceae) and four poultry virus isolates did not react in the assay. The assay detected a minimum of approximately 10 cfu of P. multocida per reaction. Of 79 poultry swabs submitted to the laboratory for routine bacteriological culture, 17 were positive in the 5′ Taq nuclease assay, but only 10 were positive by culture. The other 62 swabs were negative for P. multocida by both 5′ Taq nuclease assay and culture. The assay is suitable for use in diagnosing fowl cholera, is more rapid than bacteriological culture, and may also have application in diagnosing P. multocida infections in cattle and pigs.

Improving the outcomes of foot and ankle surgery. Professional impact of the Australasian College of Podiatric Surgeons' audit tool

Background Surgery is an example of expanded practice scope that enhances podiatry and incorporates inter-professional collaboration. By 2050 demand for foot and ankle procedures is predicted to rise nationally by 61.9%. Performance management of this increase motivated the development of an online audit tool. Developed in collaboration with the Australasian College of Podiatric Surgeons (ACPS), the ACPS audit tool provides real-time data capture and reporting. It is the first audit tool designed in Australia to support and improve the outcomes of foot and ankle surgery. Methods Audit activity in general, orthopaedic, plastic and podiatric surgery was examined using a case study design. Audit participation enablers and barriers were explored. Case study results guided a Delphi survey of international experts experienced or associated with foot and ankle surgery. Delphi survey-derived consensus informed modification of a generic data set from the Royal Australasian College of Surgeons (RACS). Based on the Delphi survey findings the ACPS online audit tool was developed and piloted. Reliability and validity of data entry and usability of this new tool was then assessed with an online survey. Results The case study found surgeon attitudes and behaviours positively impacted audit participation, and also indicated that audit data should be: (1) available in real time, (2) identify practice change, (3) applicable for safety and quality management, and; (4) useful for peer review discussion. The Delphi process established consensus on audit variables to be captured, including the modified RACS generic data set. 382 cases of foot and ankle surgery were captured across 3 months using the new tool. Data entry was found to be valid and reliable. Real-time outcome reporting and practice change identification impacted positively on safety and quality management and assisted peer review discussion. An online survey showed high levels of usability. Conclusions Surgeon contribution to audit tool development resulted in 100% audit participation. The data from the ACPS audit tool supported the ACPS submission to the Medical Services Advisory Committee to list podiatric surgery under Medicare, an outcome noted by the Federal Minister of Health.

A journey access tool to facilitate better health outcomes for people with disabilities

- Background One of the three objectives of the WHO Global Disability Action Plan 2014–2021 is removal of barriers and improved access to health services and programmes. Access to transport contributes to positive health outcomes; however, people with disabilities leaving their dwellings are confronted with barriers to their mobility. Mobility restrictions, sensory or other disabilities increase their vulnerability as road users, exposing them to higher risks of injury. PHSW and CARRS-Q have been collaborating with Handicap International Cambodia (HIC) on a Journey Access Tool (JAT). - Aims Use of the JAT is to (1) Identify transport and journey safety and barriers for people with disability and (2) Evaluation and modification of the tool after trailing to for use by NGOs and government agencies in prioritising actions around barriers. - Methodology The tool has undergone initial proof-of-concept testing in India and Viet Nam, and was trialled in Cambodia in February and May, 2015. Five teams were formed comprising a person with disability (physical, sensory or intellectual), researchers from QUT, staff from HIC, and local university students. The JAT was completed by each team and then discussed and evaluated. Two further Cambodian trials are scheduled for 2015. - Results The JAT is responsive to rural and urban contexts, and has utility for people with different disabilities. Two tools have been developed: a short version for people with a disability to complete independently, or with assistance; and a version for NGOs, DPOs and government. The tool has efficacy for advocacy.   - Conclusion The JAT has potential to assist the Mekong region with: (1) evaluating access for people with disability and other vulnerable members of the community including older people; (2) developing plans for changes to the routes in consultation with local authorities; (3) evaluating the effectiveness of implemented changes in terms of access and health; (4) inputting into policy; (5) The tool can be used for advocacy for change.

Stone Weathering in the Monastic Building Complex on Mountain of St Aaron in Petra, Jordan.

Since 1997 the Finnish Jabal Haroun Project (FJHP) has studied the ruins of the monastery and pilgrimage complex (Gr. oikos) of Aaron located on a plateau of the Mountain of Prophet Aaron, Jabal an-Nabi Harûn, ca. 5 km to the south-west of the UNESCO World Heritage site of Petra in Jordan. The state of conservation and the damaging processes affecting the stone structures of the site are studied in this M.A. thesis. The chapel was chosen as an example, as it represents the phasing and building materials of the entire site. The aim of this work is to act as a preliminary study with regards to the planning of long-term conservation at the site. The research is empirical in nature. The condition of the stones in the chapel walls was mapped using the Illustrated Glossary on Stone Deterioration, by the ICOMOS International Scientific Committee for Stone. This glossary combines several standards and systems of damage mapping used in the field. Climatic conditions (temperature and RH %) were monitored for one year (9/2005-8/2006) using a HOBO Microstation datalogger. The measurements were compared with contemporary measurements from the nearest weather station in Wadi Musa. Salts in the stones were studied by taking samples from the stone surfaces by scraping and with the “Paper Pulp”-method; with a poultice of wet cellulose fiber (Arbocel BC1000) and analyzing what main types of salts were to be found in the samples. The climatic conditions on the mountain were expected to be rapidly changing and to differ clearly from conditions in the neighboring areas. The rapid changes were confirmed, but the values did not differ as much as expected from those nearby: the 12 months monitored had average temperatures and were somewhat drier than average. Earlier research in the area has shown that the geological properties of the stone material influence its deterioration. The damage mapping showed clearly, that salts are also a major reason for stone weathering. The salt samples contained several salt combinations, whose behavior in the extremely unstable climatic conditions is difficult to predict. Detailed mapping and regular monitoring of especially the structures, that are going remain exposed, is recommended in this work.

Lithics after Stone Age in East Africa : Wadh Lang'o case study

Tutkielmassa käsitellään kiviesineiden käytön jatkumista kivikauden jälkeen Itä-Afrikassa. Rautakauden alku Itä- ja Etelä-Afrikassa liitetään perinteisesti bantuheimojen migraatioon näille alueille. Tämä vallitseva teoria otettiin tässä tutkimuksessa lähtökohdaksi. Afrikasta tunnetaan runsaasti sekä etnografisia että arkeologisia esimerkkejä kiviteknologian säilymisestä paikoin 1900-luvun loppupuolelle. Nämä liittyvät usein perimätiedon perusteella "kivikautisten" metsästäjä-keräilijöiden ja rautakautisten maanviljelijä- ja karjanhoitajayhteisöjen rinnakkaiseloon. Tutkimuskysymystä lähestytään sekä julkaistun että primääriaineiston kautta. Alussa esitellään kirjallisuudesta löytyviä esimerkkejä myöhäisestä kiviesineiden käytöstä, minkä jälkeen käydään tarkemmin läpi Malawin alueelta julkaistu aiheeseen liitettävissä oleva arkeologinen aineisto. Tätä käytetään vertailuaineistona tutkimuksen pääasiallista tapaustutkimusta käsiteltäessä. Pääasiallisena tapaustutkimuksena toimii Viktoria-järven läheisyydessä sijaitsevan Wadh Lang'o:n asuinpaikan kiviesineistön analyysi. Wadh Lang'o:sta tunnetaan pitkä kulttuurisekvenssi, joka kattaa alueen myöhäiskivikautiset ja rautakautiset kulttuurivaiheet. Stratigrafisen aineiston perusteella kiviesineet ovat säilyneet asuinpaikalla käytössä ainakin keskisen rautakauden alkuun. Varhaisimmassa vaiheessa asuinpaikkaa on asuttanut Oltome-kulttuuriin kuuluva väestö. Suurimmat muutokset materiaalisessa kulttuurissa analyysin kattamana aikana ovat aiheutuneet seuraavan kulttuurivaiheen, Elmenteitan-kulttuurin, myötä. Kiviesineistön perusteella Elmenteitan-keramiikan ilmaantuminen asuinpaikalle on liitettävissä idästäpäin Itä-Afrikan hautavajoaman suunnalta tapahtuneeseen migraatioon. Jatkuvuuden puolesta puhuvat esimerkiksi tehdyt kiviraaka-aine valinnat. Vaikuttaa, että edeltänyt Oltome-keraaminen väestö on säilyttänyt vaikutuksensa asuinpaikalla vielä tänäkin aikana. Varhaisrautakautisen Urewe-keramiikan ilmestymiseen asuinpaikalle ei näyttäisi olevan liitettävissä mitään suurisuuntaista migraatiota, toisin kuin vallalla oleva teoria bantumigraatiosta antaisi olettaa. Mahdollisesti uusi keramiikka on omaksuttu spesialistien, esimerkiksi seppien, muuton myötä tai vaeltavien kauppiaiden vaikutuksesta. Kiviesineistö osoittaa jatkuvuutta esimerkiksi mikroliittien morfologisten piirteiden ja käytettyjen raaka-aineiden perusteella. Mahdollisesti Elmenteitan-kulttuurin karjanhoitoa harjoittanut väestö on kyennyt estämään bantusiirtolaisten muuton alueelleen. Rauta ei vaikuta olleen asuinpaikalla missään vaiheessa erityisen yleistä, eikä paikalta tunneta merkkejä raudanvalmistuksesta. Tutkielman lopussa esitellään kaksi vaihtoehtoista mallia, joiden pohjalta myöhäinen kiviesineiden käyttö voisi selittyä. Niistä ensimmäinen perustuu konventinaaliseen käsitykseen, jossa rautakauden alku nähdään bantumigraation seurauksena. Toinen malli perustuu varhaisrautakautisten kulttuuripiirteiden leviämiseen diffuusion avulla. Wadh Lang'o:n tapaustutkimus näyttäisi puhuvan diffuusion puolesta, mutta toisilla alueilla, esimerkiksi Malawissa, migraatio vaikuttaa olevan todennäköisin selitysmalli. Avainsanat: arkeologia, kiviteknologia, Itä-Afrikka, Oltome, Elmenteitan, Urewe, bantumigraatio, myöhäiskivikausi, rautakausi

Near infrared spectroscopy as a rapid tool to measure volatile aroma compounds in Riesling wine: Possibilities and limits

Volatile chemical compounds responsible for the aroma of wine are derived from a number of different biochemical and chemical pathways. These chemical compounds are formed during grape berry metabolism, crushing of the berries, fermentation processes (i.e. yeast and malolactic bacteria) and also from the ageing and storage of wine. Not surprisingly, there are a large number of chemical classes of compounds found in wine which are present at varying concentrations (ng L-1 to mg L-1), exhibit differing potencies, and have a broad range of volatilities and boiling points. The aim of this work was to investigate the potential use of near infrared (NIR) spectroscopy combined with chemometrics as a rapid and low-cost technique to measure volatile compounds in Riesling wines. Samples of commercial Riesling wine were analyzed using an NIR instrument and volatile compounds by gas chromatography (GC) coupled with selected ion monitoring mass spectrometry. Correlation between the NIR and GC data were developed using partial least-squares (PLS) regression with full cross validation (leave one out). Coefficients of determination in cross validation (R 2) and the standard error in cross validation (SECV) were 0.74 (SECV: 313.6 μg L−1) for esters, 0.90 (SECV: 20.9 μg L−1) for monoterpenes and 0.80 (SECV: 1658 ?g L-1) for short-chain fatty acids. This study has shown that volatile chemical compounds present in wine can be measured by NIR spectroscopy. Further development with larger data sets will be required to test the predictive ability of the NIR calibration models developed.